summaryrefslogtreecommitdiffstats
path: root/drivers/usb
Commit message (Collapse)AuthorAgeFilesLines
* usb: gadget: code cleanupAndrzej Pietrasiewicz2014-02-181-1/+1
| | | | | | | | Remove trailing whitespace Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: gadget: FunctionFS: dereference ffs_dev conditionallyAndrzej Pietrasiewicz2014-02-181-4/+5
| | | | | | | | | ffs_dev->ffs_release_dev_callback should be accessed only if ffs_dev is not NULL. Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: dsps, use devm_kzallocMarkus Pargmann2014-02-181-3/+1
| | | | | | | Replace kzalloc by devm_kzalloc and remove the kfree() calls. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: dwc3: omap: don't check resource with devm_ioremap_resourceWolfram Sang2014-02-181-5/+0
| | | | | | | | devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: gadget: s3c-hsotg: stall ep0 in set_halt functionRobert Baldyga2014-02-181-32/+46
| | | | | | | | | | | | | | | | | When s3c_hsotg_ep_sethalt() function is called for ep0 it should be stalled in the same way that it is in s3c_hsotg_process_control() function, because SET_HALT for ep0 is delayed response for setup request. Endpoint 0, if halted, it doesn't need CLEAR_HALT because it clears "stalled" state automatically when next setup request is received. For this reason this patch moves code setting ep0 to "stalled" state to new function named s3c_hsotg_stall_ep0() which is called in s3c_hsotg_process_control() function as an immediate response for setup request, and in s3c_hsotg_ep_sethalt() function as a delayed response for setup request. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: gadget: printer: fix memory leakwenlin.kang2014-02-181-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When read data from g_printer, we see a Segmentation fault. eg: Unable to handle kernel paging request at virtual address bf048000 pgd = cf038000 [bf048000] *pgd=8e8cf811, *pte=00000000, *ppte=00000000 Internal error: Oops: 7 [#1] PREEMPT ARM Modules linked in: bluetooth rfcomm g_printer CPU: 0 Not tainted (3.4.43-WR5.0.1.9_standard #1) PC is at __copy_to_user_std+0x310/0x3a8 LR is at 0x4c808010 pc : [<c036e990>] lr : [<4c808010>] psr: 20000013 sp : cf883ea8 ip : 80801018 fp : cf883f24 r10: bf04706c r9 : 18a21205 r8 : 21953888 r7 : 201588aa r6 : 5109aa16 r5 : 0705aaa2 r4 : 5140aa8a r3 : 0000004c r2 : 00000fdc r1 : bf048000 r0 : bef5fc3c Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 8f038019 DAC: 00000015 Process g_printer_test. (pid: 661, stack limit = 0xcf8822e8) Stack: (0xcf883ea8 to 0xcf884000) 3ea0: bf047068 00001fff bef5ecb9 cf882000 00001fff bef5ecb9 3ec0: 00001fff 00000000 cf2e8724 bf044d3c 80000013 80000013 00000001 bf04706c 3ee0: cf883f24 cf883ef0 c012e5ac c0324388 c007c8ac c0046298 00008180 cf29b900 3f00: 00002000 bef5ecb8 cf883f68 00000003 cf882000 cf29b900 cf883f54 cf883f28 3f20: c012ea08 bf044b0c c000eb88 00000000 cf883f7c 00000000 00000000 00002000 3f40: bef5ecb8 00000003 cf883fa4 cf883f58 c012eae8 c012e960 00000001 bef60cb8 3f60: 000000a8 c000eb88 00000000 00000000 cf883fa4 00000000 c014329c 00000000 3f80: 000000d4 41af63f0 00000003 c000eb88 cf882000 00000000 00000000 cf883fa8 3fa0: c000e920 c012eaa4 00000000 000000d4 00000003 bef5ecb8 00002000 bef5ecb8 3fc0: 00000000 000000d4 41af63f0 00000003 b6f534c0 00000000 419f9000 00000000 3fe0: 00000000 bef5ecac 000086d9 41a986bc 60000010 00000003 0109608a 0088828a Code: f5d1f07c e8b100f0 e1a03c2e e2522020 (e8b15300) ---[ end trace 97e2618e250e3377 ]--- Segmentation fault The root cause is the dev->rx_buffers list has been broken. When we call printer_read(), the following call tree is triggered: printer_read() | +---setup_rx_reqs(req) | | | +---usb_ep_queue(req) | | | | | +---... | | | | | +---rx_complete(req). | | | +---add the req to dev->rx_reqs_active | +---while(!list_empty(&dev->rx_buffers))) The route happens when we don't use DMA or fail to start DMA in USB driver. We can see: in the case, in rx_complete() it will add the req to dev->rx_buffers. meanwhile we see that we will also add the req to dev->rx_reqs_active after usb_ep_queue() return, so this adding will break the dev->rx_buffers out. After, when we call list_empty() to check dev->rx_buffers in while(), due to can't check correctly dev->rx_buffers, so the Segmentation fault occurs when copy_to_user() is called. Signed-off-by: wenlin.kang <wenlin.kang@windriver.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: gadget: printer: fix possible deadlockwenlin.kang2014-02-181-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The problem occurs in follow path. printer_read() | +---setup_rx_reqs() | +---usb_ep_queue() | +---... | +---rx_complete() Although it is clear from code, we can't get it normally. only when we enable some spin_lock debug config option, we can find it. eg: BUG: spinlock lockup on CPU#0, g_printer_test_/584 lock: bf05e158, .magic: dead4ead, .owner: g_printer_test_/584, .owner_cpu: 0 [<c0016e1c>] (unwind_backtrace+0x0/0x104) from [<c067aef8>] (dump_stack+0x20/0x24) [<c067aef8>] (dump_stack+0x20/0x24) from [<c0680bec>] (spin_dump+0x8c/0x94) [<c0680bec>] (spin_dump+0x8c/0x94) from [<c039071c>] (do_raw_spin_lock+0x128/0x154) [<c039071c>] (do_raw_spin_lock+0x128/0x154) from [<c0685618>] (_raw_spin_lock_irqsave+0x64/0x70) [<c0685618>] (_raw_spin_lock_irqsave+0x64/0x70) from [<bf05b4e8>] (rx_complete+0x54/0x10c [g_printer]) [<bf05b4e8>] (rx_complete+0x54/0x10c [g_printer]) from [<c0480478>] (musb_g_giveback+0x78/0x88) [<c0480478>] (musb_g_giveback+0x78/0x88) from [<c048060c>] (rxstate+0xa0/0x10c) [<c048060c>] (rxstate+0xa0/0x10c) from [<c0480d50>] (musb_ep_restart+0x44/0x70) [<c0480d50>] (musb_ep_restart+0x44/0x70) from [<c0480fe4>] (musb_gadget_queue+0xe8/0xf8) [<c0480fe4>] (musb_gadget_queue+0xe8/0xf8) from [<bf05b2b0>] (setup_rx_reqs+0xa4/0x178 [g_printer]) [<bf05b2b0>] (setup_rx_reqs+0xa4/0x178 [g_printer]) from [<bf05bb58>] (printer_read+0x9c/0x3f4 [g_printer]) [<bf05bb58>] (printer_read+0x9c/0x3f4 [g_printer]) from [<c01387f0>] (vfs_read+0xb4/0x144) [<c01387f0>] (vfs_read+0xb4/0x144) from [<c01388d0>] (sys_read+0x50/0x124) [<c01388d0>] (sys_read+0x50/0x124) from [<c000e900>] (ret_fast_syscall+0x0/0x3c) The root cause is that we use the same lock two time in a path, so to avoid the deadlock, we need to unlock in setup_rx_reqs(), and only unlock. Signed-off-by: wenlin.kang <wenlin.kang@windriver.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: gadget: s3c-hsudc: remove unused labelSachin Kamat2014-02-181-1/+0
| | | | | | | | | | Fixes the following compilation warning: drivers/usb/gadget/s3c-hsudc.c: In function ‘s3c_hsudc_probe’: drivers/usb/gadget/s3c-hsudc.c:1347:1: warning: label ‘err_add_device’ defined but not used [-Wunused-label] Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: gadget: s3c2410_udc: Fix build errorSachin Kamat2014-02-181-1/+1
| | | | | | | | | | | | | | | Pass value instead of address as expected by 'usb_ep_set_maxpacket_limit'. Fixes the following compilation error introduced by commit e117e742d310 ("usb: gadget: add "maxpacket_limit" field to struct usb_ep"): drivers/usb/gadget/s3c2410_udc.c: In function ‘s3c2410_udc_reinit’: drivers/usb/gadget/s3c2410_udc.c:1632:3: error: cannot take address of bit-field ‘maxpacket’ usb_ep_set_maxpacket_limit(&ep->ep, &ep->ep.maxpacket); Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: gadget: fix error return codeJulia Lawall2014-02-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Set the return variable to an error code as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: gadget: s3c-hsotg: use %pad for dma_addr_tJingoo Han2014-02-181-4/+4
| | | | | | | | | | | | | | Use %pad for dma_addr_t to avoid the following build warnings in printks. drivers/usb/gadget/s3c-hsotg.c: In function 's3c_hsotg_start_req' drivers/usb/gadget/s3c-hsotg.c:722:3: warning: format '%x' expects argument of type 'unsigned int' but argument 6 has type 'dma_addr_t' [-Wformat] drivers/usb/gadget/s3c-hsotg.c:792:3: warning: format '%x' expects argument of type 'unsigned int' but argument 5 has type 'dma_addr_t' [-Wformat] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: gadget: s3c-hsotg: fix build on x86 and other architecturesMatt Porter2014-02-182-7/+6
| | | | | | | | | | | | | | The readsl and writesl I/O accessors are only defined on some architectures. The driver currently depends on CONFIG_ARM because the build breaks on x86, in particular. Switch to use of ioread32_rep and iowrite32_rep to fix build on all architectures and remove the CONFIG_ARM dependency. Also update printk formatting to handle a long long dma_addr_t to avoid warnings on !32-bit architectures. Signed-off-by: Matt Porter <mporter@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: musb_cppi41: Handle ISOCH differently and not use the hrtimer.George Cherian2014-02-181-0/+53
| | | | | | | | | In case of ISOCH transfers the hrtimer workaround for the hardware issue is not very reliable. Instead of checking musb_is_tx_fifo_empty() in hrtimer routine, schedule a completion work and check the same in completion work. Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: musb_cppi41: Make CPPI aware of high bandwidth transfersGeorge Cherian2014-02-181-0/+13
| | | | | | | | | Enable CPPI to handle high bandwidth transfers, especially to support webcam captures. Use a single bd to get the whole of the data in case of high bandwidth transfers. Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: musb_host: Enable ISOCH IN handling for AM335x hostGeorge Cherian2014-02-181-4/+26
| | | | | | | | Enable the isochrounous IN handling for AM335x HOST. Reprogram CPPI to receive consecutive ISOCH frames in the same URB. Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: dwc2: fix dereference before NULL checkPaul Zimmerman2014-02-151-5/+9
| | | | | | | | | In a couple of places, we were checking qtd->urb for NULL after we had already dereferenced it. Fix this by moving the check to before the dereference. Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci-platform: Change compatible string from xhci-platform to generic-xhciHans de Goede2014-02-151-0/+1
| | | | | | | | | | | | | This brings the xhci-platform bindings in sync with what we've done for the ohci- and ehci-platform drivers. As discussed there using platform as a postfix is a bit weird as the platform bus is a Linux specific thing and the bindings are supposed to be OS agnostic. Note that the old xhci-platform compatible string is kept around for, well, compatibility reasons. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* uhci-platform: Change compatible string from platform-uhci to generic-uhciHans de Goede2014-02-151-0/+1
| | | | | | | | | | | | | | | | | This brings the uhci-platform bindings in sync with what we've done for the ohci- and ehci-platform drivers. As discussed there using platform as a prefix is a bit weird as the platform bus is a Linux specific thing and the bindings are supposed to be OS agnostic. Note that the old platform-uhci compatible string is kept around for, well, compatibility reasons. While at it rename the bindings txt file to match the name of all the other ?hci-platform bindings docs. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb/misc/usbled: Add Riso Kagaku Webmail NotifierChristian Vogel2014-02-111-0/+34
| | | | | | | | | | | Add support for the "Webmail Notifier" (USB powered LED for signaling new emails) made by Riso Kagaku Corp. which displays 7 distinct colors. USB Protocol initially reverse engineered by https://code.google.com/p/usbmailnotifier/. Signed-off-by: Christian Vogel <vogelchr@vogel.cx> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ELAN: Remove useless "default M" linesPaul Bolle2014-02-112-2/+0
| | | | | | | | | | | | | The Kconfig entries for USB_U132_HCD and USB_FTDI_ELAN default to (uppercase) "M". But in Kconfig (lowercase) "m" is a magic symbol. "M" is an ordinary symbol. As "M" is never set these Kconfig symbols will also not be set by default. Since I'm not aware of a reason why these driver should be set by default, let's just drop these lines (that basically do nothing). Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Remove MACH_OMAP_H4_OTGRichard Weinberger2014-02-111-1/+1
| | | | | | | | The symbol is an orphan, get rid of it. Signed-off-by: Richard Weinberger <richard@nod.at> Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ohci-platform: check for platform data misconfigurationAlan Stern2014-02-111-20/+22
| | | | | | | | | | | | | | | | | | | | The ohci-platform driver checks for misconfigurations in cases where the Device Tree data specifies big-endian registers or descriptors but the corresponding driver config settings have not been enabled. As Jonas Gorski suggested, we may as well apply the same check to general platform data too. This requires moving the code that sets the big-endian quirk flags from the ohci_platform_reset() routine into ohci_platform_probe(), and moving the checks out of the DT-specific "if" statement clause. The patch also changes the text of the error messages in an attempt to make the nature of the error more clear. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Jonas Gorski <jogo@openwrt.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ehci-platform: check for platform data misconfigurationAlan Stern2014-02-111-20/+22
| | | | | | | | | | | | | | | | | | | | The ehci-platform driver checks for misconfigurations in cases where the Device Tree data specifies big-endian registers or descriptors but the corresponding driver config settings have not been enabled. As Jonas Gorski suggested, we may as well apply the same check to general platform data too. This requires moving the code that sets the big-endian quirk flags from the ehci_platform_reset() routine into ehci_platform_probe(), and moving the checks out of the DT-specific "if" statement clause. The patch also changes the text of the error messages in an attempt to make the nature of the error more clear. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Jonas Gorski <jogo@openwrt.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ehci-platform: Change compatible string from usb-ehci to generic-ehciHans de Goede2014-02-112-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The initial versions of the devicetree enablement patches for ehci-platform used "ehci-platform" as compatible string. However this was disliked by various reviewers because the platform bus is a Linux invention and devicetree is supposed to be OS agnostic. After much discussion I gave up, added a: "depends on !PPC_OF" to Kconfig to avoid a known conflict with PPC-OF platforms and went with the generic usb-ehci as requested. In retro-spect I should have chosen something different, the dts files for many existing boards already claim to be compatible with "usb-ehci", ie they have: compatible = "ti,ehci-omap", "usb-ehci"; In theory this should not be a problem since the "ti,ehci-omap" entry takes presedence, but in practice using a conflicting compatible string is an issue, because it makes which driver gets used depend on driver registration order. This patch changes the compatible string claimed by ehci-platform to "generic-ehci", avoiding the driver registration / module loading ordering problems, and removes the "depends on !PPC_OF" workaround. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ohci-platform: Change compatible string from usb-ohci to generic-ohciHans de Goede2014-02-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | The initial versions of the devicetree enablement patches for ohci-platform used "ohci-platform" as compatible string. However this was disliked by various reviewers because the platform bus is a Linux invention and devicetree is supposed to be OS agnostic. After much discussion I gave up and went with the generic usb-ohci as requested. In retro-spect I should have chosen something different, the dts files for many existing boards already claim to be compatible with "usb-ohci", ie they have: compatible = "ti,ohci-omap3", "usb-ohci"; In theory this should not be a problem since the "ti,ohci-omap3" entry takes presedence, but in practice using a conflicting compatible string is an issue, because it makes which driver gets used depend on driver registration order. This patch changes the compatible string claimed by ohci-platform to "generic-ohci", avoiding the driver registration / module loading ordering problems. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Kevin Hilman <khilman@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: move hub init and LED blink work to power efficient workqueueShaibal Dutta2014-02-071-6/+13
| | | | | | | | | | | | | | | | | | | | | | | | | Allow the scheduler to select the best CPU to handle hub initalization and LED blinking work. This extends idle residency times on idle CPUs and conserves power. This functionality is enabled when CONFIG_WQ_POWER_EFFICIENT is selected. [zoran.markovic@linaro.org: Rebased to latest kernel. Added commit message. Changed reference from system to power efficient workqueue for LEDs in check_highspeed() and hub_port_connect_change().] Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Xenia Ragiadakou <burzalodowa@gmail.com> Cc: Julius Werner <jwerner@chromium.org> Cc: Krzysztof Mazur <krzysiek@podlesie.net> Cc: Matthias Beyer <mail@beyermatthias.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by: Shaibal Dutta <shaibal.dutta@broadcom.com> Signed-off-by: Zoran Markovic <zoran.markovic@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: phy: msm: tiny leak on error in probe()Dan Carpenter2014-02-071-1/+2
| | | | | | | | Free "motog" on error. This is more to appease the static checkers than a real worry. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: dwc2: handle the Host Port Interrupt when it occurs in device modeDinh Nguyen2014-02-071-3/+22
| | | | | | | | | | | | | | | | | | | | | | | | According to the spec for the DWC2 controller, when the PRTINT interrupt fires, the application must clear the appropriate status bit in the Host Port Control and Status register to clear this bit. When disconnecting an A-cable when the dwc2 host driver, the PRTINT fires, but only the GINTSTS_PRTINT status is cleared, no action is done with the HPRT0 register. The HPRT0_ENACHG bit in the HPRT0 must also be poked to correctly clear the GINTSTS_PRTINT interrupt. I am seeing this behavoir on v2.93 of the DWC2 IP. When I disconnect an OTG A-cable adapter, the PRTINT interrupt fires when the DWC2 is in device mode and is never cleared. This patch adds the function to read the HPRT0 register when the PRTINT fires and the dwc2 IP has already transitioned to device mode. This function is only clearing the HPRT0_ENACHG bit for now, but can be modified to handle more. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> [ paulz: modified patch to preserve HPRT0_ENA bit ] Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ehci-platform: Add support for controllers with big-endian regs / descriptorsHans de Goede2014-02-071-2/+31
| | | | | | | | This uses the already documented devicetree booleans for this, see: Documentation/devicetree/bindings/usb/usb-ehci.txt Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ohci-platform: Add support for controllers with big-endian regs / descriptorsHans de Goede2014-02-071-0/+27
| | | | | | | | | Note this commit uses the same devicetree booleans for this as the ones already existing in the usb-ehci bindings, see: Documentation/devicetree/bindings/usb/usb-ehci.txt Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ehci-platform: Add support for clks and phy passed through devicetreeHans de Goede2014-02-072-24/+124
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently ehci-platform is only used in combination with devicetree when used with some Via socs. By extending it to (optionally) get clks and a phy from devicetree, and enabling / disabling those on power_on / off, it can be used more generically. Specifically after this commit it can be used for the ehci controller on Allwinner sunxi SoCs. Since ehci-platform is intended to handle any generic enough non pci ehci device, add a "usb-ehci" compatibility string. There already is a usb-ehci device-tree bindings document, update this with clks and phy bindings info. Although actually quite generic so far the via,vt8500 compatibilty string had its own bindings document. Somehow we even ended up with 2 of them. Since these provide no extra information over the generic usb-ehci documentation, this patch removes them. The ehci-ppc-of.c driver also claims the usb-ehci compatibility string, even though it mostly is ibm,usb-ehci-440epx specific. ehci-platform.c is not needed on ppc platforms, so add a !PPC_OF dependency to it to avoid 2 drivers claiming the same compatibility string getting build on ppc. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ohci-platform: Add support for devicetree instantiationHans de Goede2014-02-071-22/+140
| | | | | | | | | | | | | | Add support for ohci-platform instantiation from devicetree, including optionally getting clks and a phy from devicetree, and enabling / disabling those on power_on / off. This should allow using ohci-platform from devicetree in various cases. Specifically after this commit it can be used for the ohci controller found on Allwinner sunxi SoCs. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: core: let dynamic ids override static idsBjørn Mork2014-02-071-2/+2
| | | | | | | | | | | | | | | | This modifies the probing order so that any matching dynamic entry always will be used, even if the driver has a matching static entry. It is sometimes useful to dynamically update existing device entries. With the new ability to set the dynamic entry driver_info field, this can be used to test new additions to class driver exception lists or proposed changes to existing static per-device driver_info entries. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb-storage: enable multi-LUN scanning when neededAlan Stern2014-02-042-1/+9
| | | | | | | | | | | | | | | | | | | | | | People sometimes create their own custom-configured kernels and forget to enable CONFIG_SCSI_MULTI_LUN. This causes problems when they plug in a USB storage device (such as a card reader) with more than one LUN. Fortunately, we can tell fairly easily when a storage device claims to have more than one LUN. When that happens, this patch asks the SCSI layer to probe all the LUNs automatically, regardless of the config setting. The patch also updates the Kconfig help text for usb-storage, explaining that CONFIG_SCSI_MULTI_LUN may be necessary. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Thomas Raschbacher <lordvan@lordvan.com> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> CC: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: simple: add Dynastream ANT USB-m Stick device supportKristóf Ralovich2014-02-041-1/+2
| | | | | | | | | | | | | | | | | | | Add support for ANT USB-m Stick from Dynastream Innovations, by listing USB pid [34366.944805] usb 6-1: New USB device found, idVendor=0fcf, idProduct=1009 [34366.944817] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [34366.944824] usb 6-1: Product: ANT USB-m Stick [34366.944831] usb 6-1: Manufacturer: Dynastream Innovations Device reported (https://code.google.com/p/antpm/issues/detail?id=5) to work through: $ modprobe usbserial vendor=0x0fcf product=0x1009 Signed-off-by: Kristóf Ralovich <kristof.ralovich@gmail.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb-storage: add unusual-devs entry for BlackBerry 9000Alan Stern2014-02-041-0/+7
| | | | | | | | | | | This patch adds an unusual-devs entry for the BlackBerry 9000. This fixes Bugzilla #22442. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Moritz Moeller-Herrmann <moritz-kernel@moeller-herrmann.de> Tested-by: Moritz Moeller-Herrmann <moritz-kernel@moeller-herrmann.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb-storage: restrict bcdDevice range for Super Top in Cypress ATACBAlan Stern2014-02-041-1/+1
| | | | | | | | | | | | | | | The Cypress ATACB unusual-devs entry for the Super Top SATA bridge causes problems. Although it was originally reported only for bcdDevice = 0x160, its range was much larger. This resulted in a bug report for bcdDevice 0x220, so the range was capped at 0x219. Now Milan reports errors with bcdDevice 0x150. Therefore this patch restricts the range to just 0x160. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Milan Svoboda <milan.svoboda@centrum.cz> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: phy: move some error messages to debugJosh Boyer2014-02-041-5/+3
| | | | | | | | | | | | | | | | | | | the PHY layer is supposed to be optional, considering some PHY have no control bus for SW to poke around. After commit 1ae5799 (usb: hcd: Initialize USB phy if needed) any HCD which didn't provide a PHY driver would emit annoying error messages. In this patch we're decreasing those messages to debugging only and we also add a PHY prefix or use dev_dbg so we know where they're coming from. Reported-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: ftdi_sio: add Mindstorms EV3 console adapterBjørn Mork2014-02-042-0/+2
| | | | | | Cc: stable <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: dwc2: fix memory corruption in dwc2 driverPaul Zimmerman2014-02-041-11/+0
| | | | | | | | | | | | | | | | | | | The move from the staging tree to the main tree exposed a longstanding memory corruption bug in the dwc2 driver. The reordering of the driver initialization caused the dwc2 driver to corrupt the initialization data of the sdhci driver on the Raspberry Pi platform, which made the bug show up. The error is in calling to_usb_device(hsotg->dev), since ->dev is not a member of struct usb_device. The easiest fix is to just remove the offending code, since it is not really needed. Thanks to Stephen Warren for tracking down the cause of this. Reported-by: Andre Heider <a.heider@gmail.com> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: dwc2: fix role switch breakagePaul Zimmerman2014-02-041-1/+1
| | | | | | | | | | | Commit beb7e592bc "staging: dwc2: add check on dwc2_core_reset return" broke the B -> A role switching on OTG-enabled platforms. This commit fixes it. Reported-by: Dinh Nguyen <dinguyen@altera.com> Tested-by: Dinh Nguyen <dinguyen@altera.com> Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: dwc2: bail out early when booting with "nousb"Andre Heider2014-02-041-0/+3
| | | | | | | | | | | | | | | | | | | | | Add usb_disabled() check to prevent kernel oops when booting with "nousb" in the cmdline: Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... PC is at bus_add_device+0xe0/0x18c LR is at device_add_groups+0x1c/0x20 ... [<c02191c0>] (bus_add_device) from [<c0217130>] (device_add+0x41c/0x538) [<c0217130>] (device_add) from [<c023b1d4>] (usb_new_device+0x270/0x35c) [<c023b1d4>] (usb_new_device) from [<c0241174>] (usb_add_hcd+0x4fc/0x760) [<c0241174>] (usb_add_hcd) from [<c0254ce0>] (dwc2_hcd_init+0x434/0x510) [<c0254ce0>] (dwc2_hcd_init) from [<c02594f4>] (dwc2_driver_probe+0x130/0x170) [<c02594f4>] (dwc2_driver_probe) from [<c021bbd0>] (platform_drv_probe+0x28/0x58) Signed-off-by: Andre Heider <a.heider@gmail.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'for-usb-linus-2014-02-04' of ↵Greg Kroah-Hartman2014-02-049-45/+62
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus Sarah writes: xhci: Fix some regressions introduced in 3.14. Hi Greg, Here's four patches for 3.14. One of them adds an xHCI host quirk, and the other three of them fix regressions introduced in 3.14. One regression causes USB 3.0 Link PM to be enabled on all xHCI hosts (even those that may not support it), which causes some USB 3.0 devices to not enumerate. A second regression causes some xHCI hosts that don't support 64-bit addressing to stop responding to commands and die. Note, these patches don't fix the recent usbfs regression that was caused by commit 35773dac5f862cb1c82ea151eba3e2f6de51ec3e "usb: xhci: Link TRB must not occur within a USB payload burst". I'm waiting for those patches to be tested. Please pull usb-linus into usb-next, as I have feature patches that rely on 140e3026a57a Revert "usbcore: set lpm_capable field for LPM capable root hubs" Sarah Sharp
| * Revert "xhci: replace xhci_read_64() with readq()"Sarah Sharp2014-01-305-17/+23
| | | | | | | | | | | | | | | | | | This reverts commit e8b373326d8efcaf9ec1da8b618556c89bd5ffc4. Many xHCI host controllers can only handle 32-bit addresses, and writing 64-bits at a time causes them to fail. Reading 64-bits at a time may also cause them to return 0xffffffff, so revert this commit as well. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| * Revert "xhci: replace xhci_write_64() with writeq()"Sarah Sharp2014-01-294-20/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 7dd09a1af2c7150269350aaa567a11b06e831003. Many xHCI host controllers can only handle 32-bit addresses, and writing 64-bits at a time causes them to fail. Rafał reports that USB devices simply do not enumerate, and reverting this patch helps. Branimir reports that his host controller doesn't respond to an Enable Slot command and dies: [ 75.576160] xhci_hcd 0000:03:00.0: Timeout while waiting for a slot [ 88.991634] xhci_hcd 0000:03:00.0: Stopped the command ring failed, maybe the host is dead [ 88.991748] xhci_hcd 0000:03:00.0: Abort command ring failed [ 88.991845] xhci_hcd 0000:03:00.0: HC died; cleaning up [ 93.985489] xhci_hcd 0000:03:00.0: Timeout while waiting for a slot [ 93.985494] xhci_hcd 0000:03:00.0: Abort the command ring, but the xHCI is dead. [ 98.982586] xhci_hcd 0000:03:00.0: Timeout while waiting for a slot [ 98.982591] xhci_hcd 0000:03:00.0: Abort the command ring, but the xHCI is dead. [ 103.979696] xhci_hcd 0000:03:00.0: Timeout while waiting for a slot [ 103.979702] xhci_hcd 0000:03:00.0: Abort the command ring, but the xHCI is dead Signed-off-by: Sarah Sharp <sarah.a.sharp@intel.com> Reported-by: Rafał Miłecki <zajec5@gmail.com> Reported-by: Branimir Maksimovic <branimir.maksimovic@gmail.com> Cc: Xenia Ragiadakou <burzalodowa@gmail.com>
| * Revert "usbcore: set lpm_capable field for LPM capable root hubs"Sarah Sharp2014-01-223-8/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 9df89d85b407690afa46ddfbccc80bec6869971d "usbcore: set lpm_capable field for LPM capable root hubs" was created under the assumption that all USB host controllers should have USB 3.0 Link PM enabled for all devices under the hosts. Unfortunately, that's not the case. The xHCI driver relies on knowledge of the host hardware scheduler to calculate the LPM U1/U2 timeout values, and it only sets lpm_capable to one for Intel host controllers (that have the XHCI_LPM_SUPPORT quirk set). When LPM is enabled for some Fresco Logic hosts, it causes failures with a AgeStar 3UBT USB 3.0 hard drive dock: Jan 11 13:59:03 sg-laptop kernel: usb 3-1: new SuperSpeed USB device number 2 using xhci_hcd Jan 11 13:59:03 sg-laptop kernel: usb 3-1: Set SEL for device-initiated U1 failed. Jan 11 13:59:08 sg-laptop kernel: usb 3-1: Set SEL for device-initiated U2 failed. Jan 11 13:59:08 sg-laptop kernel: usb-storage 3-1:1.0: USB Mass Storage device detected Jan 11 13:59:08 sg-laptop mtp-probe[613]: checking bus 3, device 2: "/sys/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1" Jan 11 13:59:08 sg-laptop mtp-probe[613]: bus: 3, device: 2 was not an MTP device Jan 11 13:59:08 sg-laptop kernel: scsi6 : usb-storage 3-1:1.0 Jan 11 13:59:13 sg-laptop kernel: usb 3-1: Set SEL for device-initiated U1 failed. Jan 11 13:59:18 sg-laptop kernel: usb 3-1: Set SEL for device-initiated U2 failed. Jan 11 13:59:18 sg-laptop kernel: usbcore: registered new interface driver usb-storage Jan 11 13:59:40 sg-laptop kernel: usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd Jan 11 13:59:41 sg-laptop kernel: usb 3-1: device descriptor read/8, error -71 Jan 11 13:59:41 sg-laptop kernel: usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd Jan 11 13:59:46 sg-laptop kernel: usb 3-1: device descriptor read/8, error -110 Jan 11 13:59:46 sg-laptop kernel: scsi 6:0:0:0: Device offlined - not ready after error recovery Jan 11 13:59:46 sg-laptop kernel: usb 3-1: USB disconnect, device number 2 lspci for the affected host: 04:00.0 0c03: 1b73:1000 (rev 04) (prog-if 30 [XHCI]) Subsystem: 1043:1039 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at dd200000 (32-bit, non-prefetchable) [size=64K] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [80] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <2us, L1 <32us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 unlimited, L1 unlimited ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Kernel driver in use: xhci_hcd Kernel modules: xhci_hcd The commit was backported to stable kernels, and will need to be reverted there as well. Signed-off-by: Sarah Sharp <sarah.a.sharp@intel.com> Reported-by: Sergey Galanov <sergey.e.galanov@gmail.com> Cc: stable@vger.kernel.org
| * xhci: Fix resume issues on Renesas chips in Samsung laptopsSarah Sharp2014-01-221-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Don Zickus <dzickus@redhat.com> writes: Some co-workers of mine bought Samsung laptops that had mostly usb3 ports. Those ports did not resume correctly (the driver would timeout communicating and fail). This led to frustration as suspend/resume is a common use for laptops. Poking around, I applied the reset on resume quirk to this chipset and the resume started working. Reloading the xhci_hcd module had been the temporary workaround. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Don Zickus <dzickus@redhat.com> Tested-by: Prarit Bhargava <prarit@redhat.com> Cc: stable # 2.6.37
* | Merge remote-tracking branch 'agust/next' into nextBenjamin Herrenschmidt2014-01-291-12/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | << Switch mpc512x to the common clock framework and adapt mpc512x drivers to use the new clock driver. Old PPC_CLOCK code is removed entirely since there are no users any more. >>
| * | USB: fsl-mph-dr-of: adjust for OF based clock lookupGerhard Sittig2014-01-121-12/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | after device tree based clock lookup became available, the peripheral driver need no longer construct clock names which include the component index -- remove the "usb%d_clk" template, always use "ipg" instead Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Signed-off-by: Gerhard Sittig <gsi@denx.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | | Merge tag 'pm+acpi-3.14-rc1' of ↵Linus Torvalds2014-01-241-21/+20
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "As far as the number of commits goes, the top spot belongs to ACPI this time with cpufreq in the second position and a handful of PM core, PNP and cpuidle updates. They are fixes and cleanups mostly, as usual, with a couple of new features in the mix. The most visible change is probably that we will create struct acpi_device objects (visible in sysfs) for all devices represented in the ACPI tables regardless of their status and there will be a new sysfs attribute under those objects allowing user space to check that status via _STA. Consequently, ACPI device eject or generally hot-removal will not delete those objects, unless the table containing the corresponding namespace nodes is unloaded, which is extremely rare. Also ACPI container hotplug will be handled quite a bit differently and cpufreq will support CPU boost ("turbo") generically and not only in the acpi-cpufreq driver. Specifics: - ACPI core changes to make it create a struct acpi_device object for every device represented in the ACPI tables during all namespace scans regardless of the current status of that device. In accordance with this, ACPI hotplug operations will not delete those objects, unless the underlying ACPI tables go away. - On top of the above, new sysfs attribute for ACPI device objects allowing user space to check device status by triggering the execution of _STA for its ACPI object. From Srinivas Pandruvada. - ACPI core hotplug changes reducing code duplication, integrating the PCI root hotplug with the core and reworking container hotplug. - ACPI core simplifications making it use ACPI_COMPANION() in the code "glueing" ACPI device objects to "physical" devices. - ACPICA update to upstream version 20131218. This adds support for the DBG2 and PCCT tables to ACPICA, fixes some bugs and improves debug facilities. From Bob Moore, Lv Zheng and Betty Dall. - Init code change to carry out the early ACPI initialization earlier. That should allow us to use ACPI during the timekeeping initialization and possibly to simplify the EFI initialization too. From Chun-Yi Lee. - Clenups of the inclusions of ACPI headers in many places all over from Lv Zheng and Rashika Kheria (work in progress). - New helper for ACPI _DSM execution and rework of the code in drivers that uses _DSM to execute it via the new helper. From Jiang Liu. - New Win8 OSI blacklist entries from Takashi Iwai. - Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun Guo, Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava, Rashika Kheria, Tang Chen, Zhang Rui. - intel_pstate driver updates, including proper Baytrail support, from Dirk Brandewie and intel_pstate documentation from Ramkumar Ramachandra. - Generic CPU boost ("turbo") support for cpufreq from Lukasz Majewski. - powernow-k6 cpufreq driver fixes from Mikulas Patocka. - cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark Brown. - Assorted cpufreq drivers fixes and cleanups from Anson Huang, John Tobias, Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh Kumar. - cpuidle cleanups from Bartlomiej Zolnierkiewicz. - Support for hibernation APM events from Bin Shi. - Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC disabled during thaw transitions from Bjørn Mork. - PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf Hansson. - PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente Kurusa, Rashika Kheria. - New tool for profiling system suspend from Todd E Brandt and a cpupower tool cleanup from One Thousand Gnomes" * tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (153 commits) thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412) cpufreq: exynos4x12: Change L0 driver data to CPUFREQ_BOOST_FREQ Documentation: cpufreq / boost: Update BOOST documentation cpufreq: exynos: Extend Exynos cpufreq driver to support boost cpufreq / boost: Kconfig: Support for software-managed BOOST acpi-cpufreq: Adjust the code to use the common boost attribute cpufreq: Add boost frequency support in core intel_pstate: Add trace point to report internal state. cpufreq: introduce cpufreq_generic_get() routine ARM: SA1100: Create dummy clk_get_rate() to avoid build failures cpufreq: stats: create sysfs entries when cpufreq_stats is a module cpufreq: stats: free table and remove sysfs entry in a single routine cpufreq: stats: remove hotplug notifiers cpufreq: stats: handle cpufreq_unregister_driver() and suspend/resume properly cpufreq: speedstep: remove unused speedstep_get_state platform: introduce OF style 'modalias' support for platform bus PM / tools: new tool for suspend/resume performance optimization ACPI: fix module autoloading for ACPI enumerated devices ACPI: add module autoloading support for ACPI enumerated devices ACPI: fix create_modalias() return value handling ...
OpenPOWER on IntegriCloud