summaryrefslogtreecommitdiffstats
path: root/drivers/usb/gadget
Commit message (Collapse)AuthorAgeFilesLines
* usb: gadget: workaround storage command size issuesFelipe Balbi2008-10-171-4/+17
| | | | | | | | | | Try to workaround issues with bad SCSI implementations by ignoring the command size error. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: g_printer: fix handling zero-length packetSangSu Park2008-10-171-2/+1
| | | | | | | | | | | | | g_printer doesn't have to check whether the data size is a multiple of MaxPacketSize, because device controller driver already make that check. Signed-off-by: SangSu Park<sangsu@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: add Freescale QE/CPM USB peripheral controller driverLi Yang2008-10-175-0/+3188
| | | | | | | | | | | | | | | Some of Freescale SoC chips have a QE or CPM co-processor which supports full speed USB. The driver adds device mode support of both QE and CPM USB controller to Linux USB gadget. The driver is tested with MPC8360 and MPC8272, and should work with other models having QE/CPM given minor tweaks. Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: remove unused #include <version.h>Huang Weiyi2008-10-171-1/+0
| | | | | | | | | | | The driver(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION. drivers/usb/gadget/pxa27x_udc.c This patch removes the said #include <version.h>. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb gadget: defer obex enumerationDavid Brownell2008-10-171-7/+54
| | | | | | | | | | | | Some USB peripheral controller drivers support software control over the data pullup. Use those controls to prevent the OBEX function from enumerating until the userspace server has opened the /dev/ttyGS* node it will use to implement protocol chitchat with the USB host. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb gadget: cdc obex glueFelipe Balbi2008-10-174-2/+467
| | | | | | | | | | | | | The following patch introduces a new f_obex.c function driver. It allows userspace obex servers to use usb as transport layer for their messages. [ dbrownell@users.sourceforge.net: various fixes and cleanups ] Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb gadget: function activation/deactivationDavid Brownell2008-10-171-0/+64
| | | | | | | | | | | | | | | | Add a new mechanism to the composite gadget framework, letting functions deactivate (and reactivate) themselves. Think of it as a refcounted wrapper for the software pullup control. A key example of why to use this mechanism involves functions that require a userspace daemon. Those functions shuld use this new mechanism to prevent the gadget from enumerating until those daemons are activated. Without this mechanism, hosts would see devices that malfunction until the relevant daemons start. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: gadget: net2280: implement set_wedgeAlan Stern2008-10-172-6/+35
| | | | | | | | | | | This patch (as1132) implements the set_wedge() method for net2280. This method is necessary for strict USBCV compliance in g_file_storage. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: gadget: dummy_hcd: implement set_wedgeAlan Stern2008-10-171-6/+27
| | | | | | | | | | This patch (as1131) implements the set_wedge() method for dummy_hcd. This method is necessary for strict USBCV compliance in g_file_storage. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: gadget Kconfig cleanupDavid Brownell2008-10-171-121/+144
| | | | | | | | | | This reorders the list of USB peripheral controller drivers so it's more common for the initial (default) value to be relevant: put the SOC integrated silicon up front, discrete stuff last. Alphabetize. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb gadget: link fixes for network gadgetDavid Brownell2008-10-165-145/+158
| | | | | | | | | | | | | | Change how the Ethernet/RNDIS gadget driver builds: don't use separate compilation, since it works poorly when key parts are library code (with init sections etc). Instead be as close as we can to "gcc --combine ...". This is a bit more complicated than most of the others because it had to resolve a few symbol collisions. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb gadget: link fixes for cdc composite gadgetDavid Brownell2008-10-163-6/+26
| | | | | | | | | | | Change how the CDC Composite gadget driver builds: don't use separate compilation, since it works poorly when key parts are library code (with init sections etc). Instead be as close as we can to "gcc --combine ...". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb gadget: link fixes for storage gadgetDavid Brownell2008-10-162-2/+13
| | | | | | | | | | | Change how the file storage gadget driver builds: don't use separate compilation, since it works poorly when key parts are library code (with init sections etc). Instead be as close as we can to "gcc --combine ...". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb gadget: link fixes for printer gadgetDavid Brownell2008-10-162-2/+15
| | | | | | | | | | | Change how the printer gadget driver builds: don't use separate compilation, since it works poorly when key parts are library code (with init sections etc). Instead be as close as we can to "gcc --combine ...". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb gadget: link fixes for MIDI gadgetDavid Brownell2008-10-162-1/+16
| | | | | | | | | | | Change how the MIDI gadget driver builds: don't use separate compilation, since it works poorly when key parts are library code (with init sections etc). Instead be as close as we can to "gcc --combine ...". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb gadget: link fixes for gadget zeroDavid Brownell2008-10-163-17/+36
| | | | | | | | | | | Change how the Gadget Zero driver builds: don't use separate compilation, since it works poorly when key parts are library code (with init sections etc). Instead be as close as we can to "gcc --combine ...". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb gadget: link fixes for serial gadgetDavid Brownell2008-10-162-1/+19
| | | | | | | | | | | Change how the serial gadget driver builds: don't use separate compilation, since it works poorly when key parts are library code (with init sections etc). Instead be as close as we can to "gcc --combine ...". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* device create: usb: convert device_create_drvdata to device_createGreg Kroah-Hartman2008-10-161-2/+2
| | | | | | | | Now that device_create() has been audited, rename things back to the original call to be sane. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fsl_usb2_udc: fix VDBG() format stringPeter Korsgaard2008-09-231-1/+1
| | | | | | | | | | | | Fixes: drivers/usb/gadget/fsl_usb2_udc.c: In function 'dr_controller_setup': drivers/usb/gadget/fsl_usb2_udc.c:229: warning: format '%p' expects type 'void *', but argument 3 has type 'int' Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb gadget: fix omap_udc DMA regressionDavid Brownell2008-09-231-2/+2
| | | | | | | | | | | | This resolves another regression caused by the "use omap_read/write instead of __REG" patch: the hardware address used for DMA to/from the UDC became wrong. Bug noted by Russell King. Reported-by: Russell King <rmk@arm.linux.org.uk> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* removed unused #include <linux/version.h>'sAdrian Bunk2008-08-232-2/+0
| | | | | | | | This patch lets the files using linux/version.h match the files that #include it. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* USB: Fix pxa27x_udc usb speed handling.Robert Jarzmik2008-08-211-1/+1
| | | | | | | | | | | | | | The new composite framework revealed a weakness in the pxa27x_udc driver gadget register function. Instead of checking if speed asked for was USB_LOW_SPEED upon usb_gadget_register() to deny service, it checked only for USB_FULL_SPEED, thus denying service to usb high speed capable gadgets (like g_ether). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Add MUSB and TUSB supportFelipe Balbi2008-08-131-0/+10
| | | | | | | | | | | | | This patch adds support for MUSB and TUSB controllers integrated into omap2430 and davinci. It also adds support for external tusb6010 controller. Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: omap_udc: fix compilation with debug enabledDmitry Baryshkov2008-08-131-2/+3
| | | | | | | Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb gadget: issue notifications from ACM functionDavid Brownell2008-08-133-27/+235
| | | | | | | | | | | | | | | | | Update the CDC-ACM gadget code to support the peripheral-to-host notifications when the tty is opened or closed, or issues a BREAK. The serial framework code calls new generic hooks; right now only CDC-ACM uses those hooks. This resolves several REVISIT comments in the code. (Based on a patch from Felipe Balbi.) Note that this doesn't expose USB_CDC_CAP_BRK to the host, since this code still rejects USB_CDC_REQ_SEND_BREAK control requests for host-to-peripheral BREAK signaling (received via /dev/ttyGS*). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb gadget: remove needless struct membersDavid Brownell2008-08-135-10/+0
| | | | | | | | This removes some unused members from the various USB functions. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: serial gadget: rx path data loss fixesDavid Brownell2008-08-131-90/+146
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update RX path handling in new serial gadget code to cope better with RX blockage: queue every RX packet until its contents can safely be passed up to the ldisc. Most of the RX path work is now done in the RX tasklet, instead of just the final "push to ldisc" step. This addresses some cases of data loss: - A longstanding serial gadget bug: when tty_insert_flip_string() didn't copy the entire buffer, the rest of the characters were dropped! Now that packet stays queued until the rest of its data is pushed to the ldisc. - Another longstanding issue: in the unlikely case that an RX transfer returns data and also reports a fault, that data is no longer discarded. - In the recently added RX throttling logic: it needs to stop pushing data into the TTY layer, instead of just not submitting new USB read requests. When the TTY is throttled long enough, backpressure will eventually make the OUT endpoint NAK. Also: an #ifdef is removed (no longer necessary); and start switching to a better convention for debug messages (prefix them with tty name). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: gadget: protect gadget_chips.h from been included twiceFelipe Balbi2008-08-131-0/+6
| | | | | | | | | | | | Without it, we might have trouble when trying to write some composite gadget drivers. Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fix USB boot crash, ecm_do_notify(), list_add corruption. prev->next ↵David Brownell2008-08-131-2/+3
| | | | | | | | | | | | | | | | should be next (ffff88003b8f82f8) This fixes a BUG() turned up by Ingo via randconfig testing, where CONFIG_LIST_DEBUG turned up list corruption. The corruption was caused by the dummy_hcd (single-machine test harness for gadget and HCD code) trashing the request queue when driven by the new CDC composite gadget an I/O pattern that was previously uncommon. Fix suggested by Alan Stern. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King2008-08-078-18/+18
| | | | | | This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixesRussell King2008-08-071-1/+1
|\
| * USB: m66592-udc: Fix up dev_set_name() badness.Paul Mundt2008-07-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Commit 0031a06e2f07ab0d1bc98c31dbb6801f95f4bf01 converted all of the USB drivers to use dev_set_name(), though there was a typo on the m66592-udc conversion that handed off the wrong pointer (we want the struct device here obviously, not the struct usb_gadget). Signed-off-by: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | [ARM] Remove asm/hardware.h, use asm/arch/hardware.h insteadRussell King2008-08-073-3/+3
| | | | | | | | | | | | | | | | | | Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | [ARM] Eliminate useless includes of asm/mach-types.hRussell King2008-08-072-2/+0
|/ | | | | | | | There are 43 includes of asm/mach-types.h by files that don't reference anything from that file. Remove these unnecessary includes. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Rename WARN() to WARNING() to clear the namespaceArjan van de Ven2008-07-2518-32/+25
| | | | | | | | | | | | | We want to use WARN() as a variant of WARN_ON(), however a few drivers are using WARN() internally. This patch renames these to WARNING() to avoid the namespace clash. A few cases were defining but not using the thing, for those cases I just deleted the definition. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Greg KH <greg@kroah.com> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2008-07-231-2/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (85 commits) [ARM] pxa: add base support for PXA930 Handheld Platform (aka SAAR) [ARM] pxa: add base support for PXA930 Evaluation Board (aka TavorEVB) [ARM] pxa: add base support for PXA930 (aka Tavor-P) [ARM] Update mach-types [ARM] pxa: make littleton to use the new smc91x platform data [ARM] pxa: make zylonite to use the new smc91x platform data [ARM] pxa: make mainstone to use the new smc91x platform data [ARM] pxa: make lubbock to use new smc91x platform data [NET] smc91x: prepare SMC_USE_PXA_DMA to be specified in platform data [NET] smc91x: prepare for SMC_IO_SHIFT to be a platform configurable variable [NET] smc91x: add SMC91X_NOWAIT flag to platform data [NET] smc91x: favor the use of SMC91X_USE_* instead of SMC_CAN_USE_* [NET] smc91x: remove "irq_flags" from "struct smc91x_platdata" [ARM] 5146/1: pxa2xx: convert all boards to call pxa2xx_transceiver_mode helper Support for LCD on e740 e750 e400 and e800 e-series PDAs E-series UDC support PXA UDC - allow use of inverted GPIO for pullup Add e350 support Fix broken e-series build E-series GPIO / IRQ definitions. ...
| * Merge branch 'pxa' into develRussell King2008-07-139-192/+191
| |\ | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/configs/em_x270_defconfig arch/arm/configs/xm_x270_defconfig
| | * Merge branch 'eseries' into pxaRussell King2008-07-121-2/+4
| | |\ | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/mach-pxa/Makefile
| | | * PXA UDC - allow use of inverted GPIO for pullupIan Molton2008-07-101-2/+4
| | | | | | | | | | | | | | | | Signed-off-by: Ian Molton <spyro@f2s.com>
| | * | Merge branch 'machtypes' into pxa-palmRussell King2008-07-092-1/+4
| | |\ \ | | | |/ | | |/|
* | | | device create: usb: convert device_create to device_create_drvdataGreg Kroah-Hartman2008-07-211-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | device_create() is race-prone, so use the race-free device_create_drvdata() instead as device_create() is going away. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | | usb_gadget: composite cdc gadget fault handlingDavid Brownell2008-07-212-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These two fixes ensure the new "CDC Composite Device" gadget fails cleanly when it's loaded on hardware that can't support this particular gadget driver. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | | usb gadget: minor USBCV fix for composite frameworkDavid Lopo2008-07-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fill in a reserved/unused device qualifier field to ensure that the USBCV tests will always pass. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | | USB: remove board-specific UP2OCR configuration from pxa27x-udcDaniel Ribeiro2008-07-211-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the board-specific UP2OCR configuration from the pxa27x-udc driver. Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | | usb gadget: g_cdc dependso on NETRandy Dunlap2008-07-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | g_cdc needs to depend on NET, otherwise net-related build errors happen: ERROR: "netif_carrier_on" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "netif_carrier_off" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "netif_rx" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "alloc_etherdev_mq" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "free_netdev" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "register_netdev" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "print_mac" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "dev_kfree_skb_any" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "__alloc_skb" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "eth_type_trans" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "unregister_netdev" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "__netif_schedule" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "skb_put" [drivers/usb/gadget/g_cdc.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | | USB: gadget: Push BKL down into driversAlan Cox2008-07-212-14/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This keeps the gadget ioctl method wrapped but pushes the BKL down into the gadget code so we can use unlocked_ioctl(). Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | | usb ethernet gadget: use composite gadget frameworkDavid Brownell2008-07-211-2456/+173
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Building on the previous patches which took code from this driver and pakaged it in more-reusable network "function" components, this patch gets rid of the original code and uses those components instead. As seen with the other gadget driver conversions, the resulting code is much easier to understand and (presumably) work with. In this case that's especially true, since the Ethernet gadget had grown to handle three (!) different Ethernet-over-USB protocols. This modularization should make it much easier to add a fourth option for the newish CDC "Ethernet Emulation Model" (or EEM). Lightly tested, primarily at full speed. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | | usb gadget: new "CDC Composite" gadget driverDavid Brownell2008-07-213-0/+262
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a simple example of a composite gadget, combining two Communications Class Device (CDC) functions: ECM and ACM. This provides a clear example of how the composite gadget framework is intended to work. It's surprising that MS-Windows (or at least, XP and previous) won't "just work" with something this simple... One /proc/bus/usb/devices listing looks like: T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 46 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0525 ProdID=a4aa Rev= 3.01 S: Manufacturer=Linux 2.6.26-rc6-pnut with net2280 S: Product=CDC Composite Gadget C:* #Ifs= 4 Cfg#= 1 Atr=c0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=cdc_acm E: Ad=86(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Not all USB peripheral controller hardware can support this driver. All the highspeed-capable peripheral controllers with drivers now in the mainline kernel seem to support this, as does omap_udc. But many full speed controllers don't have enough endpoints, or (as with the PXA controllers) don't support altsettings. Lightly tested. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | | usb ethernet gadget: split RNDIS functionDavid Brownell2008-07-213-4/+848
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a RNDIS function driver, extracted from the all-in-one Ethernet gadget driver. Lightly tested ... there seems to be a pre-existing problem when talking to Windows XP SP2, not quite sure what's up with that yet. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | | usb ethernet gadget: split CDC Ethernet functionDavid Brownell2008-07-214-1/+881
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a "CDC Ethernet" (ECM) function driver, extracted from the all-in-one Ethernet gadget driver. This is a good example of how to implement interface altsettings. In fact it's currently the only such example in the gadget stack, pending addition of OBEX support. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
OpenPOWER on IntegriCloud