summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/Makefile
Commit message (Collapse)AuthorAgeFilesLines
* tty/serial: Add GPIOLIB helpers for controlling modem linesRichard Genoud2014-05-281-0/+3
| | | | | | | | | | | | This patch add some helpers to control modem lines (CTS/RTS/DSR...) via GPIO. This will be useful for many boards which have a serial controller that only handle CTS/RTS pins (or even just RX/TX). Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: sc16is7xxJon Ringle2014-04-251-0/+1
| | | | | | | | | | | | | The SC16IS7xx is a slave I2C-bus/SPI interface to a single-channel high performance UART. The SC16IS7xx's internal register set is backward-compatible with the widely used and widely popular 16C450. The SC16IS7xx also provides additional advanced features such as auto hardware and software flow control, automatic RS-485 support, and software reset. Signed-off-by: Jon Ringle <jringle@gridpoint.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tty/serial: add arm/arm64 semihosting earlyconRob Herring2014-04-241-0/+1
| | | | | | | | | | | Add earlycon support for the arm/arm64 semihosting debug serial interface. This allows enabling a debug console when early_params are processed. This is based on the arm64 earlyprintk smh support and is intended to replace it. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tty/serial: add generic serial earlyconRob Herring2014-04-241-0/+2
| | | | | | | | | | | | | | | This introduces generic earlycon infrastructure for serial devices based on the 8250 earlycon. This allows for supporting earlycon option with other serial devices. The earlycon output is enabled at the time early_params are processed. Only architectures that have fixmap support or have functional ioremap when early_params are processed are supported. This is the same restriction that the 8250 driver had. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tty: serial: Add driver for MEN's 16z135 High Speed UART.Johannes Thumshirn2014-04-241-0/+1
| | | | | | | | | | | | | Add driver for MEN's 16z135 High Speed UART. The 16z135 is a memory mapped UART Core on an MCB FPGA and has 1024 byte deep FIFO buffers for the RX and TX path. It also has configurable FIFO fill level IRQs and data copied to and from the hardware has to be acknowledged. Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de> Reviewed-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: Remove old SC26XX driverAlexander Shiyan2013-12-191-1/+0
| | | | | | | | New driver for NXP (Philips) UART ICs was introduced in September 2012. Old driver no longer used anywhere, this patch removes it. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds2013-09-061-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull Tile arch updates from Chris Metcalf: "These changes bring in a bunch of new functionality that has been maintained internally at Tilera over the last year, plus other stray bits of work that I've taken into the tile tree from other folks. The changes include some PCI root complex work, interrupt-driven console support, support for performing fast-path unaligned data fixups by kernel-based JIT code generation, CONFIG_PREEMPT support, vDSO support for gettimeofday(), a serial driver for the tilegx on-chip UART, KGDB support, more optimized string routines, support for ftrace and kprobes, improved ASLR, and many bug fixes. We also remove support for the old TILE64 chip, which is no longer buildable" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: (85 commits) tile: refresh tile defconfig files tile: rework <asm/cmpxchg.h> tile PCI RC: make default consistent DMA mask 32-bit tile: add null check for kzalloc in tile/kernel/setup.c tile: make __write_once a synonym for __read_mostly tile: remove support for TILE64 tile: use asm-generic/bitops/builtin-*.h tile: eliminate no-op "noatomichash" boot argument tile: use standard tile_bundle_bits type in traps.c tile: simplify code referencing hypervisor API addresses tile: change <asm/system.h> to <asm/switch_to.h> in comments tile: mark pcibios_init() as __init tile: check for correct compiler earlier in asm-offsets.c tile: use standard 'generic-y' model for <asm/hw_irq.h> tile: use asm-generic version of <asm/local64.h> tile PCI RC: add comment about "PCI hole" problem tile: remove DEBUG_EXTRA_FLAGS kernel config option tile: add virt_to_kpte() API and clean up and document behavior tile: support FRAME_POINTER tile: support reporting Tilera hypervisor statistics ...
| * tilegx: Add tty serial support for TILE-Gx on-chip UARTChris Metcalf2013-09-031-0/+1
| | | | | | | | | | Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial:st-asc: Add ST ASC driver.Srinivas Kandagatla2013-07-261-0/+1
|/ | | | | | | | | | | | | | | | This patch adds support to ASC (asynchronous serial controller) driver, which is basically a standard serial driver. This IP is common across all the ST parts for settop box platforms. ASC is embedded in ST COMMS IP block. It supports Rx & Tx functionality. It support all industry standard baud rates. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> CC: Stephen Gallimore <stephen.gallimore@st.com> CC: Stuart Menefy <stuart.menefy@st.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tty: serial: add Freescale lpuart driver supportJingchang Lu2013-06-081-0/+1
| | | | | | | | Add Freescale lpuart driver support. The lpuart device can be found on Vybrid VF610 and Layerscape LS-1 SoCs. Signed-off-by: Jingchang Lu <b35083@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: rp2: New driver for Comtrol RocketPort 2 cardsKevin Cernekee2013-01-171-0/+1
| | | | | | | | | | | | | | This driver supports the RocketPort EXPRESS and RocketPort INFINITY families of PCI/PCIe multiport serial adapters. These adapters use a "RocketPort 2" ASIC that is not compatible with the original RocketPort driver (CONFIG_ROCKETPORT). Tested with the RocketPort EXPRESS Octa DB9 and Quad DB9. Also added an old RocketPort 8J PCI card to the same system to verify that rocket.c and rp2.c coexist peacefully. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: tegra: add serial driverLaxman Dewangan2013-01-151-0/+1
| | | | | | | | | | | | | | | NVIDIA's Tegra has multiple UART controller which supports: - APB DMA based controller fifo read/write. - End Of Data interrupt in incoming data to know whether end of frame achieve or not. - HW controlled RTS and CTS flow control to reduce SW overhead. Add serial driver to use all above feature. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Alan Cox <alan@linux.intel.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial/arc-uart: Add new driverVineet Gupta2012-10-301-0/+1
| | | | | | | | | Driver for non-standard on-chip UART, instantiated in the ARC (Synopsys) FPGA Boards such as ARCAngel4/ML50x Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tty/serial: Add kgdb_nmi driverAnton Vorontsov2012-09-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This special driver makes it possible to temporary use NMI debugger port as a normal console by issuing 'nmi_console' command (assuming that the port is attached to KGDB). Unlike KDB's disable_nmi command, with this driver you are always able to go back to the debugger using KGDB escape sequence ($3#33). This is because this console driver processes the input in NMI context, and thus is able to intercept the magic sequence. Note that since the console interprets input and uses polling communication methods, for things like PPP it is still better to fully detach debugger port from the KGDB NMI (i.e. disable_nmi), and use raw console. Usually, to enter the debugger one have to type the magic sequence, so initially the kernel will print the following prompt on the NMI debugger console: Type $3#33 to enter the debugger> For convenience, there is a kgdb_fiq.knock kernel command line option, when set to 0, this turns the special command to just a return key press, so the kernel will be printing this: Hit <return> to enter the debugger> This is more convenient for long debugging sessions, although it makes nmi_console feature somewhat useless. And for the cases when NMI connected to a dedicated button, the knocking can be disabled altogether by setting kgdb_fiq.knock to -1. Suggested-by: Colin Cross <ccross@android.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Alan Cox <alan@linux.intel.com> Acked-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: New serial driver SCCNXPAlexander Shiyan2012-09-051-0/+1
| | | | | | | | | | | | | | | | | | | | This driver is a replacement for a SC26XX driver with a lot of improvements and new features. The main differences from the SC26XX driver: - Removed dependency on MIPS. Driver can be used on any platform. - Added support for SCC2681, SCC2691, SCC2692, SC28L91, SC28L92, SC28L202, SCC68681 and SCC68692 ICs. - Using devm_-related functions. - Improved error handling of serial port, improved FIFO handling. - Ability to load multiple instances of drivers. To avoid the possibility of regression, driver SC26XX left in the system to confirm the stability of the driver on platforms where it is being used. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: New serial driver MAX310XAlexander Shiyan2012-08-161-1/+1
| | | | | | | | | | | | | | | | | | | | | This driver is a replacement for a MAX3107 driver with a lot of improvements and new features. The main differences from the old version: - Using the regmap. - Using devm_XXX-related functions. - The use of threaded IRQ with IRQF_ONESHOT flag allows the driver to the hardware that supports only level IRQ. - Improved error handling of serial port, improved FIFO handling, improved hardware & software flow control. - Advanced flags allows turn on RS-485 mode (Auto direction control). - Ability to load multiple instances of drivers. - Added support for MAX3108. - GPIO support. - Driver is quite ready for adding I2C support and support other ICs with compatible registers set (MAX3109, MAX14830). Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: Add driver for LPC32xx High Speed UARTsRoland Stigge2012-06-121-0/+1
| | | | | | | | | This patch adds a driver for the 3 High Speed UARTs of the LPC32xx SoC that support up to 921600bps. These UARTs are different from the 4 "Standard" UARTs of the LPC32xx. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'tty-3.3-rc3' tty-nextGreg Kroah-Hartman2012-02-101-1/+2
|\ | | | | | | | | | | | | This is needed to handle the 8250 file merge mess properly for future patches. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * tty: serial: altera_uart: Add CONSOLE_POLL supportTobias Klauser2012-02-091-1/+1
| | | | | | | | | | | | | | This allows altera_uart to be used for KGDB debugging over serial line. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * serial/efm32: add new driverUwe Kleine-König2012-01-261-0/+1
| | | | | | | | | | Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | serial: Kill off Moorestown codeAlan Cox2012-01-261-1/+0
| | | | | | | | | | | | | | | | | | All production devices operate in the Oaktrail configuration with legacy PC elements present and an ACPI BIOS. Continue stripping out the Moorestown elements from the tree leaving Medfield. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | serial: group all the 8250 related code togetherPaul Gortmaker2012-01-241-16/+3
|/ | | | | | | | | | | | | The drivers/tty/serial dir is already getting rather busy. Relocate the 8250 related drivers to their own subdir to reduce the clutter. Note that sunsu.c is not included in this move -- it is 8250-like hardware, but it does not use any of the existing infrastructure -- and does not depend on SERIAL_8250. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2012-01-141-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (119 commits) MIPS: Delete unused function add_temporary_entry. MIPS: Set default pci cache line size. MIPS: Flush huge TLB MIPS: Octeon: Remove SYS_SUPPORTS_HIGHMEM. MIPS: Octeon: Add support for OCTEON II PCIe MIPS: Octeon: Update PCI Latency timer and enable more error reporting. MIPS: Alchemy: Update cpu-feature-overrides MIPS: Alchemy: db1200: Improve PB1200 detection. MIPS: Alchemy: merge Au1000 and Au1300-style IRQ controller code. MIPS: Alchemy: chain IRQ controllers to MIPS IRQ controller MIPS: Alchemy: irq: register pm at irq init time MIPS: Alchemy: Touchscreen support on DB1100 MIPS: Alchemy: Hook up IrDA on DB1000/DB1100 net/irda: convert au1k_ir to platform driver. MIPS: Alchemy: remove unused board headers MTD: nand: make au1550nd.c a platform_driver MIPS: Netlogic: Mark Netlogic chips as SMT capable MIPS: Netlogic: Add support for XLP 3XX cores MIPS: Netlogic: Merge some of XLR/XLP wakup code MIPS: Netlogic: Add default XLP config. ... Fix up trivial conflicts in arch/mips/kernel/{perf_event_mipsxx.c, traps.c} and drivers/tty/serial/Makefile
| * SERIAL: AR933X: Add driver for the built-in UART of the SoCGabor Juhos2011-12-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the driver for the built-in UART of the Atheros AR933X SoCs. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Kathy Giori <kgiori@qca.qualcomm.com> Cc: "Luis R. Rodriguez" <rodrigue@qca.qualcomm.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: linux-serial@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2526/ Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-01-091-5/+0
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device tree conversions for samsung and tegra Both platforms had some initial device tree support, but this adds much more to actually make it usable. * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits) ARM: dts: Add intial dts file for EXYNOS4210 SoC, SMDKV310 and ORIGEN ARM: EXYNOS: Add Exynos4 device tree enabled board file rtc: rtc-s3c: Add device tree support input: samsung-keypad: Add device tree support ARM: S5PV210: Modify platform data for pl330 driver ARM: S5PC100: Modify platform data for pl330 driver ARM: S5P64x0: Modify platform data for pl330 driver ARM: EXYNOS: Add a alias for pdma clocks ARM: EXYNOS: Limit usage of pl330 device instance to non-dt build ARM: SAMSUNG: Add device tree support for pl330 dma engine wrappers DMA: PL330: Add device tree support ARM: EXYNOS: Modify platform data for pl330 driver DMA: PL330: Infer transfer direction from transfer request instead of platform data DMA: PL330: move filter function into driver serial: samsung: Fix build for non-Exynos4210 devices serial: samsung: add device tree support serial: samsung: merge probe() function from all SoC specific extensions serial: samsung: merge all SoC specific port reset functions ARM: SAMSUNG: register uart clocks to clock lookup list serial: samsung: remove all uses of get_clksrc and set_clksrc ... Fix up fairly trivial conflicts in arch/arm/mach-s3c2440/clock.c and drivers/tty/serial/Kconfig both due to just adding code close to changes.
| * | serial: samsung: merge probe() function from all SoC specific extensionsThomas Abraham2011-12-231-5/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | With reset port, set clock and get clock functions in SoC specific extentions being removed, only the driver probe is left over in these extensions. The probe function itself can be merged into one and moved into the samsung common serial driver. With driver probe also moved, all the SoC specific extentions are no longer required and they are deleted. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* | serial: add irq handler for Freescale 16550 errata.Paul Gortmaker2011-12-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sending a break on the SOC UARTs found in some MPC83xx/85xx/86xx chips seems to cause a short lived IRQ storm (/proc/interrupts typically shows somewhere between 300 and 1500 events). Unfortunately this renders SysRQ over the serial console completely inoperable. The suggested workaround in the errata is to read the Rx register, wait one character period, and then read the Rx register again. We achieve this by tracking the old LSR value, and on the subsequent interrupt event after a break, we don't read LSR, instead we just read the RBR again and return immediately. The "fsl,ns16550" is used in the compatible field of the serial device to mark UARTs known to have this issue. Thanks to Scott Wood for providing the errata data which led to a much cleaner fix. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | UART: add CSR SiRFprimaII SoC on-chip uart driversRong Wang2011-11-171-0/+1
|/ | | | | | | | | | | | | | | | | | | SiRFprimaII is the latest generation application processor from CSR’s multi-function SoC product family. The SoC support codes are in arch/arm/mach-prima2 from Linux mainline 3.0. There are three dedicated UARTs in system. This patch adds basic driver support for them. It has used the newest pinmux subsystem from Linus Walleij. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rong Wang <Rong.Wang@csr.com> Signed-off-by: Bin Shi <Bin.Shi@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* TTY: serial, move 68360 driver to stagingJiri Slaby2011-09-221-1/+0
| | | | | | | | | | | | | | | This driver has been broken at least since 2008. At that time, a88487c79b (Fix compile errors in SGI console drivers) broke this driver completely. And since nobody noticed for the past 3 years, move it into staging. I think this will rot there and we will throw it away completely after some time. Or maybe someone will volunteer to fix it ;). Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* tty: add a DesignWare 8250 driverJamie Iles2011-08-261-0/+1
| | | | | | | | | | | | The Synopsys DesignWare 8250 is an 8250 that has an extra interrupt that gets raised when writing to the LCR when busy. To handle this we need special serial_out, serial_in and handle_irq methods. Add a new platform driver that uses these accessors. Cc: Alan Cox <alan@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Revert "tty: serial8250: add helpers for the DesignWare 8250"Greg Kroah-Hartman2011-08-241-1/+0
| | | | | | | | | | | This reverts commit 6b1a98d1c4851235d9b6764b3f7b7db7909fc760. It causes a build error that needs to be resolved differently. Cc: Alan Cox <alan@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* tty: serial8250: add helpers for the DesignWare 8250Jamie Iles2011-08-231-0/+1
| | | | | | | | | | | | | The Synopsys DesignWare 8250 is an 8250 that has an extra interrupt that gets raised when writing to the LCR when busy. To handle this we need special serial_out, serial_in and handle_irq methods. Add a new function serial8250_use_designware_io() that configures a uart_port with these accessors. Cc: Alan Cox <alan@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* serial:blackfin: rename Blackfin serial driver to bfin_uart.cSonic Zhang2011-08-231-1/+1
| | | | | | | | bfin_5xx.c is not a general name for all Blackfin chips. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ARM: mach-s3c2400: deleteNicolas Pitre2011-07-181-1/+0
| | | | | | | | | | | | | | | | | | | | On Tue, 28 Jun 2011, Ben Dooks wrote: > On Tue, Jun 28, 2011 at 11:22:57PM +0200, Arnd Bergmann wrote: > > > On a related note, what about mach-s3c2400? It seems to be even more > > incomplete. > > Probably the same fate awaits that. It is so old that there's little > incentive to do anything with it. So out it goes as well. The PORT_S3C2400 definition in include/linux/serial_core.h is left there to prevent a reuse of the same number for another port type. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
* ARM: mach-s3c24a0: deleteNicolas Pitre2011-07-181-1/+0
| | | | | | | | | | | | | | Commit bcae8aeb32 "[ARM] S3C24A0: Initial architecture support files" brought in a bunch of files while explicitly leaving out the corresponding Kconfig entry, stating that the series is not complete. More than 2.5 years later, the support for this has not seen any progress. This is therefore dead code. If someone wants to revive this code, it is always possible to retrieve it from the Git repository. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Ben Dooks <ben-linux@fluff.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
* Merge branch 'tty-next' of ↵Linus Torvalds2011-05-231-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (48 commits) serial: 8250_pci: add support for Cronyx Omega PCI multiserial board. tty/serial: Fix break handling for PORT_TEGRA tty/serial: Add explicit PORT_TEGRA type n_tracerouter and n_tracesink ldisc additions. Intel PTI implementaiton of MIPI 1149.7. Kernel documentation for the PTI feature. export kernel call get_task_comm(). tty: Remove to support serial for S5P6442 pch_phub: Support new device ML7223 8250_pci: Add support for the Digi/IBM PCIe 2-port Adapter ASoC: Update cx20442 for TTY API change pch_uart: Support new device ML7223 IOH parport: Use request_muxed_region for IT87 probe and lock tty/serial: add support for Xilinx PS UART n_gsm: Use print_hex_dump_bytes drivers/tty/moxa.c: Put correct tty value TTY: tty_io, annotate locking functions TTY: serial_core, remove superfluous set_task_state TTY: serial_core, remove invalid test Char: moxa, fix locking in moxa_write ... Fix up trivial conflicts in drivers/bluetooth/hci_ldisc.c and drivers/tty/serial/Makefile. I did the hci_ldisc thing as an evil merge, cleaning things up.
| * tty/serial: add support for Xilinx PS UARTJohn Linn2011-05-031-0/+1
| | | | | | | | | | | | | | | | | | The Xilinx PS Uart is used on the new ARM based SoC. This UART is not compatible with others such that a seperate driver is required. Signed-off-by: John Linn <john.linn@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | SERIAL: Lantiq: Add driver for MIPS Lantiq SOCs.John Crispin2011-05-191-0/+1
|/ | | | | | | | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: alan@lxorguk.ukuu.org.uk Cc: linux-mips@linux-mips.org Cc: linux-serial@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2269/ Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Merge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2011-03-171-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (289 commits) davinci: DM644x EVM: register MUSB device earlier davinci: add spi devices on tnetv107x evm davinci: add ssp config for tnetv107x evm board davinci: add tnetv107x ssp platform device spi: add ti-ssp spi master driver mfd: add driver for sequencer serial port ARM: EXYNOS4: Implement Clock gating for System MMU ARM: EXYNOS4: Enhancement of System MMU driver ARM: EXYNOS4: Add support for gpio interrupts ARM: S5P: Add function to register gpio interrupt bank data ARM: S5P: Cleanup S5P gpio interrupt code ARM: EXYNOS4: Add missing GPYx banks ARM: S3C64XX: Fix section mismatch from cpufreq init ARM: EXYNOS4: Add keypad device to the SMDKV310 ARM: EXYNOS4: Update clocks for keypad ARM: EXYNOS4: Update keypad base address ARM: EXYNOS4: Add keypad device helpers ARM: EXYNOS4: Add support for SATA on ARMLEX4210 plat-nomadik: make GPIO interrupts work with cpuidle ApSleep mach-u300: define a dummy filter function for coh901318 ... Fix up various conflicts in - arch/arm/mach-exynos4/cpufreq.c - arch/arm/mach-mxs/gpio.c - drivers/net/Kconfig - drivers/tty/serial/Kconfig - drivers/tty/serial/Makefile - drivers/usb/gadget/fsl_mxc_udc.c - drivers/video/Kconfig
| * Merge commit 'v2.6.38-rc4' into imx-for-2.6.39Sascha Hauer2011-02-111-0/+1
| | | | | | | | | | | | | | Conflicts: arch/arm/mach-mxs/clock-mx28.c Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | Merge branch 'remove' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2011-03-161-1/+0
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'remove' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6629/2: aaec2000: remove support for mach-aaec2000 ARM: lh7a40x: remove unmaintained platform support Fix up trivial conflicts in - arch/arm/mach-{aaec2000,lh7a40x}/include/mach/memory.h (removed) - drivers/usb/gadget/Kconfig (USB_[GADGET_]LH7A40X removed, others added)
| * | ARM: lh7a40x: remove unmaintained platform supportRussell King2011-01-241-1/+0
| |/ | | | | | | | | | | | | | | | | | | lh7a40x has only been receiving updates for updates to generic code. The last involvement from the maintainer according to the git logs was in 2006. As such, it is a maintainence burden with no benefit. This gets rid of two defconfigs. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | serial: msm_serial_hs: Add MSM high speed UART driverMayank Rana2011-03-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver supports UART-DM HW on MSM platforms. It uses the on chip DMA to drive data transfers and has optional support for UART power management independent of Linux suspend/resume and wakeup from Rx. The driver was originally developed by Google. It is functionally equivalent to the version available at: http://android.git.kernel.org/?p=kernel/experimental.git the differences being: 1) Remove wakelocks and change unsupported DMA API. 2) Replace clock selection register codes by macros. 3) Fix checkpatch errors and add inline documentation. 4) Add runtime PM hooks for active power state transitions. 5) Handle error path and cleanup resources if required. CC: Nick Pelly <npelly@google.com> Signed-off-by: Sankalp Bose <sankalpb@codeaurora.org> Signed-off-by: Mayank Rana <mrana@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | tty: Add msm_smd_tty driverNiranjana Vishwanathapura2011-02-171-0/+1
|/ | | | | | | | | | msm_smd_tty driver provides tty device interface to 'DS' and 'GPSNMEA' streaming SMD ports. Cc: Brian Swetland <swetland@google.com> Signed-off-by: Niranjana Vishwanathapura <nvishwan@codeaurora.org> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* tty: move drivers/serial/ to drivers/tty/serial/Greg Kroah-Hartman2011-01-131-0/+94
The serial drivers are really just tty drivers, so move them to drivers/tty/ to make things a bit neater overall. This is part of the tty/serial driver movement proceedure as proposed by Arnd Bergmann and approved by everyone involved a number of months ago. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl> Cc: Michael H. Warfield <mhw@wittsend.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
OpenPOWER on IntegriCloud