summaryrefslogtreecommitdiffstats
path: root/drivers/serial/sh-sci.c
Commit message (Collapse)AuthorAgeFilesLines
* sh: fix Oops in the serial SCI driverGuennadi Liakhovetski2010-05-221-2/+3
| | | | | | | | Fix an Oops, triggering, if the DMA buffer allocation for the Rx channel in sh-sci.c fails. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* Merge branch 'next' of ↵Linus Torvalds2010-05-211-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: DMAENGINE: extend the control command to include an arg async_tx: trim dma_async_tx_descriptor in 'no channel switch' case DMAENGINE: DMA40 fix for allocation of logical channel 0 DMAENGINE: DMA40 support paused channel status dmaengine: mpc512x: Use resource_size DMA ENGINE: Do not reset 'private' of channel ioat: Remove duplicated devm_kzalloc() calls for ioatdma_device ioat3: disable cacheline-unaligned transfers for raid operations ioat2,3: convert to producer/consumer locking ioat: convert to circ_buf DMAENGINE: Support for ST-Ericssons DMA40 block v3 async_tx: use of kzalloc/kfree requires the include of slab.h dmaengine: provide helper for setting txstate DMAENGINE: generic channel status v2 DMAENGINE: generic slave control v2 dma: timb-dma: Update comment and fix compiler warning dma: Add timb-dma DMAENGINE: COH 901 318 fix bytesleft DMAENGINE: COH 901 318 rename confusing vars
| * Merge branch 'ioat' into dmaengineDan Williams2010-05-171-4/+1
| |\
| * | DMAENGINE: extend the control command to include an argLinus Walleij2010-05-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds an argument to the DMAengine control function, so that we can later provide control commands that need some external data passed in through an argument akin to the ioctl() operation prototype. [dan.j.williams@intel.com: fix up some missed conversions] Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
| * | DMAENGINE: generic slave control v2Linus Walleij2010-03-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert the device_terminate_all() operation on the DMA engine to a generic device_control() operation which can now optionally support also pausing and resuming DMA on a certain channel. Implemented for the COH 901 318 DMAC as an example. [dan.j.williams@intel.com: update for timberdale] Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Maciej Sosnowski <maciej.sosnowski@intel.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Li Yang <leoli@freescale.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: Magnus Damm <damm@opensource.se> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Joe Perches <joe@perches.com> Cc: Roland Dreier <rdreier@cisco.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* | | sh,sh-sci: Use NO_POLL_CHAR in the SCIF polled console codeJason Wessel2010-05-201-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sci_poll_get_char() needs to return immediately if there is no input from the chip to process, and must return a value of NO_POLL_CHAR. This allows kgdboc to process multiple polled devices while kgdb is active. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Paul Mundt <lethal@linux-sh.org>
* | | Merge branch 'sh/stable-updates'Paul Mundt2010-04-261-0/+1
|\ \ \ | | |/ | |/| | | | | | | | | | | | | | | | Conflicts: arch/sh/kernel/dwarf.c drivers/dma/shdma.c Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
| | |
| \ \
| \ \
| \ \
*---. \ \ Merge branches 'sh/intc-extension', 'sh/dmaengine', 'sh/serial-dma' and ↵Paul Mundt2010-03-301-63/+126
|\ \ \ \ \ | |_|_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'sh/clkfwk' Conflicts: arch/sh/kernel/cpu/clock.c Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| | | * | serial: sh-sci: clkdev updates for MSTP gating.Paul Mundt2010-03-101-20/+37
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes up some of the I/D/F clock ambiguity in the sh-sci driver. The interface clock in most cases just wraps back to the peripheral clock, while the function clock wraps in to the MSTP bits. As the logic was somewhat inverted, this cleans that up, and also enables all CPUs with SCI MSTP bits to match function clocks through clkdev lookup. As a result, this gets rid of the clk string abuse on the sh side, and the clock string will be killed off once the ARM code has had a chance to sync up. This also enables MSTP gating on CPUs like 7786 which had never wired it up before. Impacted CPUs are primarily all SH-Mobiles, SH7785, and SH7786. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| | * | SH: extend SCI DMA support to work on SCIFA portsGuennadi Liakhovetski2010-03-231-33/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SCIFA ports have additional bits to control DMA requests and they must have respective interrupt sources enabled, as the datasheet suggests, the only way to avoid actually taking interrupts in addition to DMA events is by masking the IRQ on the CPU. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| | * | serial: sh-sci: Use sg_dma_len() and sg_dma_address()Magnus Damm2010-03-231-8/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert the dmaengine code in sh-sci.c from directly accessing the struct scatterlist members length, dma_length and dma_address to using the macros sg_dma_len() and sg_dma_address(). Makes the code build for ARM. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| | * | dmaengine: shdma: Remove sh_dmae_slave_chan_id enumMagnus Damm2010-03-231-2/+2
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch replaces the sh_dmae_slave_chan_id enum with an unsigned int. The purpose of this chainge is to make it possible to separate the slave id enums from the dmaengine header. The slave id enums varies with processor model, so in the future it makes sense to put these in the processor specific headers together with the pinmux enums. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | | SH: remove superfluous warning from the serial driverGuennadi Liakhovetski2010-03-231-4/+0
| |/ |/| | | | | | | | | | | | | This warning has been introduced during the SCI DMA support developmenr and is not needed any more. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | serial: sh-sci: remove duplicated #includeHuang Weiyi2010-03-151-1/+0
|/ | | | | | | | Remove duplicated #include('s) in drivers/serial/sh-sci.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* serial: sh-sci: Tidy up build warnings.Paul Mundt2010-03-021-3/+1
| | | | | | | The recent sh-sci DMA support introduces a number of trivial build warnings, clean them up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* serial: sh-sci: Add DMA support.Guennadi Liakhovetski2010-03-021-46/+572
| | | | | | | | Support using DMA for sending and receiving data over SCI(F) interfaces of various SH SoCs. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* serial: sh-sci: using correct fifo size for SCIF and SCIFA ports.Markus Pietrek2010-01-151-1/+12
| | | | | | | | | The sh-sci driver used the wrong fifosize for PORT_SCIFA and PORT_SCIF ports. If an incorrect size is used, the serial core will enforce an early shutdown on the port, especially with baudrates < 9600. Signed-off-by: Markus Pietrek <Markus.Pietrek@emtrion.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* serial: sh-sci: Convert tremaining ctrl_xxx I/O routines to __raw_xxx.Paul Mundt2009-12-241-2/+2
| | | | | | | | | ctrl_xxx() is an antiquated SH interface, while __raw_xxx is the standard API that accomplishes the same thing. As such, this converts the remaining sh-sci straggles over, which enables the driver to be wired up for ARM SH-Mobile CPUs as well. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* serial: sh-sci: earlyprintk zero uartclk fixMagnus Damm2009-12-241-3/+13
| | | | | | | | This establishes a sensible max baud rate for the earlyprintk cases where the port's uartclk has not yet been determined. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds2009-12-161-9/+45
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (33 commits) sh: Fix test of unsigned in se7722_irq_demux() sh: mach-ecovec24: Add FSI sound support sh: mach-ecovec24: Add mt9t112 camera support sh: mach-ecovec24: Add tw9910 support sh: MSIOF/mmc_spi platform data for the Ecovec24 board sh: ms7724se: Add ak4642 support sh: Fix up FPU build for SH5 sh: Remove old early serial console code V2 sh: sh5 scif pdata (sh5-101/sh5-103) sh: sh4a scif pdata (sh7757/sh7763/sh7770/sh7780/sh7785/sh7786/x3) sh: sh4a scif pdata (sh7343/sh7366/sh7722/sh7723/sh7724) sh: sh4 scif pdata (sh7750/sh7760/sh4-202) sh: sh3 scif pdata (sh7705/sh770x/sh7710/sh7720) sh: sh2a scif pdata (sh7201/sh7203/sh7206/mxg) sh: sh2 scif pdata (sh7616) sh-sci: Extend sh-sci driver with early console V2 sh: Stub in P3 ioremap support for nommu parts. sh: wire up vmallocinfo support in ioremap() implementations. sh: Make the unaligned trap handler always obey notification levels. sh: Couple kernel and user write page perm bits for CONFIG_X2TLB ...
| * sh-sci: Extend sh-sci driver with early console V2Magnus Damm2009-12-151-9/+45
| | | | | | | | | | | | | | | | | | | | | | | | This is V2 of early serial console support for the sh-sci driver. The early serial console is using early platform devices and "earlyprintk". To use this feature the early platform devices must be broken out to one device per port and the desired port should be selected on the kernel command line like: "earlyprintk=sh-sci.N[,baudrate][,keep]" Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | const: constify remaining dev_pm_opsAlexey Dobriyan2009-12-151-1/+1
|/ | | | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* serial: sh-sci: Fix too early port disabling.Guennadi Liakhovetski2009-12-041-2/+2
| | | | | | | | | | | | | Currently serial ports on SH CPUs get disabled too early, because the sci_tx_empty() routine claims to not be able to detect whether the transmission has been completed and just always returns TIOCSER_TEMT. This results in corrupt output of last characters if the port is not open for reading at the same time. It is however possible to detect whether transmission has been completed. Use the TEND bit of the status register for this. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* serial: sh-sci: Depend on HAVE_CLK unconditionally.Paul Mundt2009-11-251-52/+1
| | | | | | | | | | | | | The sh-sci code conditionalized the clock framework support in order to give the other platforms a chance to catch up. sh64 supported this some time ago and the forthcoming ARM changes handle this as well, this leaves h8300 as the odd one out. H8300 has had since 2.5 to merge it's sh-sci support upstream, and has yet to do so. At this point I will no longer be holding back the driver to support an unreponsive architecture, 7 years is quite enough of a grace period. Support is easily implemented on the architecture if and when it ever decides to merge its changes upstream. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* serial: sh-sci: don't use __devexit_p to wrap sci_removeUwe Kleine-König2009-11-251-1/+1
| | | | | | | | | | The function sci_remove is defined without any section modifier, so don't use __devexit_p to wrap it. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Magnus Damm <damm@opensource.se> Cc: linux-kernel@vger.kernel.org Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* serial: sh-sci: disable callback typo fixMagnus Damm2009-11-061-1/+1
| | | | | | | Avoid invoking the disable callback in case of NULL. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* serial: kill off uart_infoAlan Cox2009-09-191-5/+5
| | | | | | | | We moved this into uart_state, now move the fields out of the separate structure and kill it off. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* sh: Add initial support for SH7757 CPU subtypeYoshihiro Shimoda2009-08-211-1/+2
| | | | | Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Rework irqflags tracing to fix up CONFIG_PROVE_LOCKING.Stuart Menefy2009-07-291-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This cleans up the irqflags tracing code quite a bit and ties it in to various missing callsites that caused an imbalance when CONFIG_PROVE_LOCKING was enabled. Previously this was catching on: 987 #ifdef CONFIG_PROVE_LOCKING 988 DEBUG_LOCKS_WARN_ON(!p->hardirqs_enabled); 989 DEBUG_LOCKS_WARN_ON(!p->softirqs_enabled); 990 #endif 991 retval = -EAGAIN; with hardirqs being doubly enabled, and subsequently bailing out with the following call trace: Call trace: [<88035224>] __lock_acquire+0x616/0x6a6 [<88015a8c>] do_fork+0xf8/0x2b0 [<880331ec>] trace_hardirqs_on_caller+0xd4/0x114 [<88241074>] _spin_unlock_irq+0x20/0x64 [<88035224>] __lock_acquire+0x616/0x6a6 [<8800386c>] kernel_thread+0x48/0x70 [<88024ecc>] ____call_usermodehelper+0x0/0x110 [<88024ecc>] ____call_usermodehelper+0x0/0x110 [<88003894>] kernel_thread_helper+0x0/0x14 [<88024bac>] __call_usermodehelper+0x38/0x70 [<88025dc0>] worker_thread+0x150/0x274 [<88035b9c>] lock_release+0x0/0x198 [<88024b74>] __call_usermodehelper+0x0/0x70 [<88028cf0>] autoremove_wake_function+0x0/0x30 [<88028bf2>] kthread+0x3e/0x70 [<88025c70>] worker_thread+0x0/0x274 [<8800389c>] kernel_thread_helper+0x8/0x14 [<88028bb4>] kthread+0x0/0x70 [<88003894>] kernel_thread_helper+0x0/0x14 Reported-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* serial: sh-sci: fix sci interrupt handlerSUGIOKA Toshinobu2009-07-071-4/+4
| | | | | | | Fix up the error bit handling on SCI ports. Signed-off-by: SUGIOKA Toshinobu <sugioka@itonet.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh-sci: update receive error handling for muxed irqsMagnus Damm2009-07-031-3/+4
| | | | | | | | | | | | | | | | | This patch updates the receive error code for muxed interrupts in the sh-sci driver. Receive error interrupts may be generated by the hardware if RE or REIE bits in SCSCR are set. Update the muxed interrupt handling code to acknowledge error interrupts if RE or REIE is set, instead of only acknowledging if REIE is set. Without this patch error interrupts may be generated but never acked resulting in a "nobody cared" crash. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* serial: sh-sci: Move over to dev_pm_ops.Paul Mundt2009-06-151-8/+10
| | | | | | | Presently the boot log whines about suspend/resume hooks at the platform driver level, move these over to dev_pm_ops. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* serial: sh-sci: Fix up PORT_SCI console output ordering.SUGIOKA Toshinobu2009-06-021-2/+1
| | | | | | | | | | Fix SCI transmission sequence in console output function. This reorders the write sequence to match the SH-3 manual, and corrects a console corruption bug observed on SH-3 SCI. Signed-off-by: Toshinobu Sugioka <sugioka@itonet.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: clkfwk: module_clk -> peripheral_clk rename.Paul Mundt2009-05-131-1/+1
| | | | | | | For consistenct naming, and to allow us to fix up some confusion in the SH-Mobile clock framework, amongst other places. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* serial: sh-sci: Fix up h8300 support.Yoshinori Sato2009-05-081-0/+4
| | | | | | | | - Dummy SCIF functions define. - h8300 specific header include. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* serial: sh-sci: Fix up section mismatch in error path.Paul Mundt2009-05-081-1/+1
| | | | | | | | The sci_probe_single() path attempts to use sci_remove() for the error path, while sci_remove() is still flagged as __devexit. So, we simply discard the section annotation. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh-sci: improve clock framework supportMagnus Damm2009-05-081-31/+46
| | | | | | | | Use enable/disable hooks for clock framework integration. Make sure we control the clock for the serial console as well. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh-sci: ioremap() in a single placeMagnus Damm2009-05-081-34/+20
| | | | | | | Handle ioremap() in sci_config_port only. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh-sci: replace sci_init_ports()Magnus Damm2009-05-081-57/+50
| | | | | | | Replace sci_init_ports() with sci_init_single(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh-sci: allow single port platform devicesMagnus Damm2009-05-081-53/+72
| | | | | | | Allow registration of single port sh-sci platform devices. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh-sci: use to_sci_port() if possibleMagnus Damm2009-05-081-5/+5
| | | | | Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh-sci: rework serial console supportMagnus Damm2009-05-081-24/+23
| | | | | | | Rework sh-sci serial console code. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh-sci: remove early_sci_setup()Magnus Damm2009-05-081-14/+0
| | | | | | | Remove unused early_sci_setup() function from sh-sci. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh-sci: add platform device private dataMagnus Damm2009-05-081-42/+85
| | | | | | | This patch adds per-platform private data to the sh-sci driver. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Integrate the SH-5 onchip_remap() more coherently.Paul Mundt2009-05-071-6/+0
| | | | | | | | | | | Presently this is special-cased for early initialization. While there are situations where these static early initializations are still necessary, with minor changes it is possible to use this for the regular ioremap implementation as well. This allows us to kill off the special-casing for the remap completely and to start tidying up all of the SH-5 special-casing in drivers. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Add support for SH7786 CPU subtype.Kuninori Morimoto2009-03-031-1/+3
| | | | | | | | | | | | | | This adds preliminary support for the SH7786 CPU subtype. While this is a dual-core CPU, only UP is supported for now. L2 cache support is likewise not yet implemented. More information on this particular CPU subtype is available at: http://www.renesas.com/fmwk.jsp?cnt=sh7786_root.jsp&fp=/products/mpumcu/superh_family/sh7780_series/sh7786_group/ Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* serial: sh-sci: console drainageMagnus Damm2009-02-271-1/+7
| | | | | | | | Modify the serial console code to wait for the transmit FIFO, make sure all bits have been put on the wire before returning. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* serial: sh-sci: Fix up port pinmux for SH7366.Paul Mundt2008-12-221-1/+1
| | | | Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* serial: sh-sci: sci_poll_get_char() is only used by CONFIG_CONSOLE_POLL.Paul Mundt2008-12-221-0/+3
| | | | | | | | sci_poll_put_char() happens to also be used by the serial console, while sci_poll_get_char() is only used by CONFIG_CONSOLE_POLL. Add another gnarly ifdef to shut up the compiler. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
OpenPOWER on IntegriCloud