summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/libsas
Commit message (Collapse)AuthorAgeFilesLines
* Merge tag 'v3.13-rc6' into for-3.14/coreJens Axboe2013-12-311-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Needed to bring blk-mq uptodate, since changes have been going in since for-3.14/core was established. Fixup merge issues related to the immutable biovec changes. Signed-off-by: Jens Axboe <axboe@kernel.dk> Conflicts: block/blk-flush.c fs/btrfs/check-integrity.c fs/btrfs/extent_io.c fs/btrfs/scrub.c fs/logfs/dev_bdev.c
| * [SCSI] libsas: fix usage of ata_tf_to_fisDan Williams2013-11-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 110dd8f19df5 "[SCSI] libsas: fix scr_read/write users and update the libata documentation" we have been passing pmp=1 and is_cmd=0 to ata_tf_to_fis(). Praveen reports that eSATA attached drives do not discover correctly. His investigation found that the BIOS was passing pmp=0 while Linux was passing pmp=1 and failing to discover the drives. Update libsas to follow the libata example of pulling the pmp setting from the ata_link and correct is_cmd to be 1 since all tf's submitted through ->qc_issue are commands. Presumably libsas lldds do not care about is_cmd as they have sideband mechanisms to perform link management. http://marc.info/?l=linux-scsi&m=138179681726990 [jejb: checkpatch fix] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reported-by: Praveen Murali <pmurali@logicube.com> Tested-by: Praveen Murali <pmurali@logicube.com> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* | block: Kill bio_segments()/bi_vcnt usageKent Overstreet2013-11-231-4/+4
|/ | | | | | | | | | | | | | | | | | | | | | When we start sharing biovecs, keeping bi_vcnt accurate for splits is going to be error prone - and unnecessary, if we refactor some code. So bio_segments() has to go - but most of the existing users just needed to know if the bio had multiple segments, which is easier - add a bio_multiple_segments() for them. (Two of the current uses of bio_segments() are going to go away in a couple patches, but the current implementation of bio_segments() is unsafe as soon as we start doing driver conversions for immutable biovecs - so implement a dumb version for bisectability, it'll go away in a couple patches) Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Neil Brown <neilb@suse.de> Cc: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com> Cc: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
* [SCSI] libsas: implement > 16 byte CDB supportJames Bottomley2013-06-041-1/+1
| | | | | | | | | | | | | | | | | | Remove the arbitrary expectation in libsas that all SCSI commands are 16 bytes or less. Instead do all copies via cmd->cmd_len (and use a pointer to this in the libsas task instead of a copy). Note that this still doesn't enable > 16 byte CDB support in the underlying drivers because their internal format has to be fixed and the wire format of > 16 byte CDBs according to the SAS spec is different. the libsas drivers (isci, aic94xx, mvsas and pm8xxx are all updated for this change. Cc: Lukasz Dorau <lukasz.dorau@intel.com> Cc: Maciej Patelczyk <maciej.patelczyk@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Jack Wang <xjtuwjp@gmail.com> Cc: Lindar Liu <lindar_liu@usish.com> Cc: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* Merge branch 'misc' into for-linusJames Bottomley2013-05-105-87/+87
|\ | | | | | | Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] sas: unify the pointlessly separated enums sas_dev_type and ↵James Bottomley2013-05-105-87/+87
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sas_device_type These enums have been separate since the dawn of SAS, mainly because the latter is a procotol only enum and the former includes additional state for libsas. The dichotomy causes endless confusion about which one you should use where and leads to pointless warnings like this: drivers/scsi/mvsas/mv_sas.c: In function 'mvs_update_phyinfo': drivers/scsi/mvsas/mv_sas.c:1162:34: warning: comparison between 'enum sas_device_type' and 'enum sas_dev_type' [-Wenum-compare] Fix by eliminating one of them. The one kept is effectively the sas.h one, but call it sas_device_type and make sure the enums are all properly namespaced with the SAS_ prefix. Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* | Merge branch 'for-3.10/core' of git://git.kernel.dk/linux-blockLinus Torvalds2013-05-081-3/+3
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull block core updates from Jens Axboe: - Major bit is Kents prep work for immutable bio vecs. - Stable candidate fix for a scheduling-while-atomic in the queue bypass operation. - Fix for the hang on exceeded rq->datalen 32-bit unsigned when merging discard bios. - Tejuns changes to convert the writeback thread pool to the generic workqueue mechanism. - Runtime PM framework, SCSI patches exists on top of these in James' tree. - A few random fixes. * 'for-3.10/core' of git://git.kernel.dk/linux-block: (40 commits) relay: move remove_buf_file inside relay_close_buf partitions/efi.c: replace useless kzalloc's by kmalloc's fs/block_dev.c: fix iov_shorten() criteria in blkdev_aio_read() block: fix max discard sectors limit blkcg: fix "scheduling while atomic" in blk_queue_bypass_start Documentation: cfq-iosched: update documentation help for cfq tunables writeback: expose the bdi_wq workqueue writeback: replace custom worker pool implementation with unbound workqueue writeback: remove unused bdi_pending_list aoe: Fix unitialized var usage bio-integrity: Add explicit field for owner of bip_buf block: Add an explicit bio flag for bios that own their bvec block: Add bio_alloc_pages() block: Convert some code to bio_for_each_segment_all() block: Add bio_for_each_segment_all() bounce: Refactor __blk_queue_bounce to not use bi_io_vec raid1: use bio_copy_data() pktcdvd: Use bio_reset() in disabled code to kill bi_idx usage pktcdvd: use bio_copy_data() block: Add bio_copy_data() ...
| * block: Remove some unnecessary bi_vcnt usageKent Overstreet2013-03-231-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | More prep work for immutable bvecs/effecient bio splitting - usage of bi_vcnt has to be auditing, so getting rid of all the unnecessary usage makes that easier. Plus, bio_segments() is really what this code wanted, as it respects the current value of bi_idx. Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> CC: Eric Moore <Eric.Moore@lsi.com> CC: "James E.J. Bottomley" <JBottomley@parallels.com> CC: linux-scsi@vger.kernel.org
* | [SCSI] libsas: fix handling vacant phy in sas_set_ex_phy()Lukasz Dorau2013-04-061-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a result of the SMP discover function is PHY VACANT, the content of discover response structure (dr) is not valid. It sometimes happens that dr->attached_sas_addr can contain even SAS address of other phy. In such case an invalid phy is created, what causes NULL pointer dereference during destruction of expander's phys. So if a result of SMP function is PHY VACANT, the content of discover response structure (dr) must not be copied to phy structure. This patch fixes the following bug: BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 IP: [<ffffffff811c9002>] sysfs_find_dirent+0x12/0x90 Call Trace: [<ffffffff811c95f5>] sysfs_get_dirent+0x35/0x80 [<ffffffff811cb55e>] sysfs_unmerge_group+0x1e/0xb0 [<ffffffff813329f4>] dpm_sysfs_remove+0x24/0x90 [<ffffffff8132b0f4>] device_del+0x44/0x1d0 [<ffffffffa016fc59>] sas_rphy_delete+0x9/0x20 [scsi_transport_sas] [<ffffffffa01a16f6>] sas_destruct_devices+0xe6/0x110 [libsas] [<ffffffff8107ac7c>] process_one_work+0x16c/0x350 [<ffffffff8107d84a>] worker_thread+0x17a/0x410 [<ffffffff81081b76>] kthread+0x96/0xa0 [<ffffffff81464944>] kernel_thread_helper+0x4/0x10 Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com> Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com> Reviewed-by: Maciej Patelczyk <maciej.patelczyk@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* | [SCSI] libsas: use right function to alloc smp responseJohn Gong2013-04-061-1/+1
|/ | | | | | | | | In fact the disc_resp buffer will be overwrite by smp response, so we never found this typo, correct it by using the right one. Signed-off-by: John Gong <john_gong@usish.com> Signed-off-by: Jack Wang <jack_wang@usish.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* treewide: fix typo of "suport" in various comments and KconfigMasanari Iida2012-11-191-1/+1
| | | | | Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* [SCSI] libsas, ipr: cleanup ata_host flags initialization via ata_host_initDan Williams2012-08-241-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | libsas and ipr pass flags to ata_host_init that are meant for the port. ata_host flags: ATA_HOST_SIMPLEX = (1 << 0), /* Host is simplex, one DMA channel per host only */ ATA_HOST_STARTED = (1 << 1), /* Host started */ ATA_HOST_PARALLEL_SCAN = (1 << 2), /* Ports on this host can be scanned in parallel */ ATA_HOST_IGNORE_ATA = (1 << 3), /* Ignore ATA devices on this host. */ flags passed by libsas: ATA_FLAG_SATA = (1 << 1), ATA_FLAG_PIO_DMA = (1 << 7), /* PIO cmds via DMA */ ATA_FLAG_NCQ = (1 << 10), /* host supports NCQ */ The only one that aliases is ATA_HOST_STARTED which is a 'don't care' in the libsas and ipr cases since ata_hosts from these sources are not registered with libata. Reported-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Brian King <brking@us.ibm.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: suspend / resume supportDan Williams2012-08-248-14/+310
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | libsas power management routines to suspend and recover the sas domain based on a model where the lldd is allowed and expected to be "forgetful". sas_suspend_ha - disable event processing allowing the lldd to take down links without concern for causing hotplug events. Regardless of whether the lldd actually posts link down messages libsas notifies the lldd that all domain_devices are gone. sas_prep_resume_ha - on the way back up before the lldd starts link training clean out any spurious events that were generated on the way down, and re-enable event processing sas_resume_ha - after the lldd has started and decided that all phys have posted link-up events this routine is called to let libsas start it's own timeout of any phys that did not resume. After the timeout an lldd can cancel the phy teardown by posting a link-up event. Storage for ex_change_count (u16) and phy_change_count (u8) are changed to int so they can be set to -1 to indicate 'invalidated'. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jacek Danecki <jacek.danecki@intel.com> Tested-by: Maciej Patelczyk <maciej.patelczyk@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] async: introduce 'async_domain' typeDan Williams2012-07-201-1/+1
| | | | | | | | | | | | | | | | | | | This is in preparation for teaching async_synchronize_full() to sync all pending async work, and not just on the async_running domain. This conversion is functionally equivalent, just embedding the existing list in a new async_domain type. The .registered attribute is used in a later patch to distinguish between domains that want to be flushed by async_synchronize_full() versus those that only expect async_synchronize_{full|cookie}_domain to be used for flushing. [jejb: add async.h to scsi_priv.h for struct async_domain] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: trim sas_task of slow path infrastructureDan Williams2012-07-203-14/+37
| | | | | | | | | | | The timer and the completion are only used for slow path tasks (smp, and lldd tmfs), yet we incur the allocation space and cpu setup time for every fast path task. Cc: Xiangliang Yu <yuxiangl@marvell.com> Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: drop sata port multiplier infrastructureDan Williams2012-07-201-6/+0
| | | | | | | | | | On the way to add a new sata_device field, noticed that libsas is carrying port multiplier infrastructure that is explicitly disabled by sas_discover_sata(). The aic94xx touches the unused port_no, so leave that field in case there was some use for it. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: fix sas_discover_devices return code handlingDan Williams2012-07-201-27/+12
| | | | | | | | | | | | | | | | | | | | | | commit 198439e4 [SCSI] libsas: do not set res = 0 in sas_ex_discover_dev() commit 19252de6 [SCSI] libsas: fix wide port hotplug issues The above commits seem to have confused the return value of sas_ex_discover_dev which is non-zero on failure and sas_ex_join_wide_port which just indicates short circuiting discovery on already established ports. The result is random discovery failures depending on configuration. Calls to sas_ex_join_wide_port are the source of the trouble as its return value is errantly assigned to 'res'. Convert it to bool and stop returning its result up the stack. Cc: <stable@vger.kernel.org> Tested-by: Dan Melnic <dan.melnic@amd.com> Reported-by: Dan Melnic <dan.melnic@amd.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jack Wang <jack_wang@usish.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: continue revalidationDan Williams2012-07-201-4/+4
| | | | | | | | | | | Continue running revalidation until no more broadcast devices are discovered. Fixes cases where re-discovery completes too early in a domain with multiple expanders with pending re-discovery events. Servicing BCNs can get backed up behind error recovery. Cc: <stable@vger.kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: sas_rediscover_dev did not look at the SMP exec status.Jeff Skirvin2012-07-201-1/+6
| | | | | | | | | | | The discovery function "sas_rediscover_dev" had two bugs: 1) it did not pay attention to the return status from the SMP task execution; 2) the stack variable used for the returned SAS address was compared against 0 without being initialized. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: use ->lldd_I_T_nexus_reset for ->eh_bus_reset_handlerDan Williams2012-07-201-11/+8
| | | | | | | | | | | | | | | sas_eh_bus_reset_handler() amounts to sas_phy_reset() without notification of the reset to the lldd. If this is triggered from eh-cmnd recovery there may be sas_tasks for the lldd to terminate, so ->lldd_I_T_nexus_reset is warranted. Cc: Xiangliang Yu <yuxiangl@marvell.com> Cc: Luben Tuikov <ltuikov@yahoo.com> Cc: Jack Wang <jack_wang@usish.com> Reviewed-by: Jacek Danecki <jacek.danecki@intel.com> [jacek: modify pm8001_I_T_nexus_reset to return -ENODEV] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: add sas_eh_abort_handlerDan Williams2012-07-201-0/+21
| | | | | | | | | When recovering failed eh-cmnds let the lldd attempt an abort via scsi_abort_eh_cmnd before escalating. Reviewed-by: Jacek Danecki <jacek.danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: enforce eh strategy handlers only in eh contextDan Williams2012-07-203-4/+130
| | | | | | | | | | | | | The strategy handlers may be called in places that are problematic for libsas (i.e. sata resets outside of domain revalidation filtering / libata link recovery), or problematic for userspace (non-blocking ioctl to sleeping reset functions). However, these routines are also called for eh escalations and recovery of scsi_eh_prep_cmnd(), so permit them as long as we are running in the host's error handler, otherwise arrange for them to be triggered in eh_context. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: cleanup spurious calls to scsi_schedule_ehMaciej Trela2012-07-202-2/+0
| | | | | | | | | | | | | | eh is woken up automatically by the presence of failed commands, scsi_schedule_eh is reserved for cases where there are no failed commands. This guarantees that host_eh_sceduled is only incremented when an explicit eh request is made. Reviewed-by: Jacek Danecki <jacek.danecki@intel.com> Signed-off-by: Maciej Trela <maciej.trela@intel.com> [fixed spurious delete of sas_ata_task_abort] Signed-off-by: Artur Wojcik <artur.wojcik@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libata, libsas: introduce sched_eh and end_eh port opsDan Williams2012-07-205-25/+72
| | | | | | | | | | | | | | | | | | | | When managing shost->host_eh_scheduled libata assumes that there is a 1:1 shost-to-ata_port relationship. libsas creates a 1:N relationship so it needs to manage host_eh_scheduled cumulatively at the host level. The sched_eh and end_eh port port ops allow libsas to track when domain devices enter/leave the "eh-pending" state under ha->lock (previously named ha->state_lock, but it is no longer just a lock for ha->state changes). Since host_eh_scheduled indicates eh without backing commands pinning the device it can be deallocated at any time. Move the taking of the domain_device reference under the port_lock to guarantee that the ata_port stays around for the duration of eh. Reviewed-by: Jacek Danecki <jacek.danecki@intel.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: fix taskfile corruption in sas_ata_qc_fill_rtfDan Williams2012-07-081-6/+6
| | | | | | | | | | | | | | | | | fill_result_tf() grabs the taskfile flags from the originating qc which sas_ata_qc_fill_rtf() promptly overwrites. The presence of an ata_taskfile in the sata_device makes it tempting to just copy the full contents in sas_ata_qc_fill_rtf(). However, libata really only wants the fis contents and expects the other portions of the taskfile to not be touched by ->qc_fill_rtf. To that end store a fis buffer in the sata_device and use ata_tf_from_fis() like every other ->qc_fill_rtf() implementation. Cc: <stable@vger.kernel.org> Reported-by: Praveen Murali <pmurali@logicube.com> Tested-by: Praveen Murali <pmurali@logicube.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] Revert "[SCSI] libsas: fix sas port naming"Dan Williams2012-04-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit a692b0eec5efae382dfa800e8b4b083f172921a7. Tom reports: [ 8.741033] ------------[ cut here ]------------ [ 8.741038] WARNING: at fs/sysfs/dir.c:508 sysfs_add_one+0xc1/0xf0() [ 8.741040] Hardware name: To Be Filled By O.E.M. [ 8.741041] sysfs: cannot create duplicate filename ...and missing 2 out of 4 drives connected to mvsas. Commit a692b0ee made the assumption that all the phy ids an lldd registers to libsas are unique. However, in the "multi-chip" case mvsas does a rather annoying duplication of phy ids in the array passed to libsas. So, for example, chip0 has phy0-3 at ha phy index 0-3 and chip1 has its phy0-3 at ha phy index 4-7. The more natural model would be to create a scsi_host (and sas_ha) per chip (controller), but for now revert the naming fix which unfortunately means dealing with unpredictable end-device names for a bit longer. Cc: Xiangliang Yu <yuxiangl@marvell.com> Cc: Patrick Thomson <patrick.s.thomson@intel.com> Reported-by: Tom Rini <trini@ti.com> Tested-by: Tom Rini <trini@ti.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: fix false positive 'device attached' conditionsDan Williams2012-04-231-1/+8
| | | | | | | | | | | | | | | | Normalize phy->attached_sas_addr to return a zero-address in the case when device-type == NO_DEVICE or the linkrate is invalid to handle expanders that put non-zero sas addresses in the discovery response: sas: ex 5001b4da000f903f phy02:U:0 attached: 0100000000000000 (no device) sas: ex 5001b4da000f903f phy01:U:0 attached: 0100000000000000 (no device) sas: ex 5001b4da000f903f phy03:U:0 attached: 0100000000000000 (no device) sas: ex 5001b4da000f903f phy00:U:0 attached: 0100000000000000 (no device) Reported-by: Andrzej Jakowski <andrzej.jakowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas, libata: fix start of life for a sas ata_portDan Williams2012-04-233-29/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This changes the ordering of initialization and probing events from: 1/ allocate rphy in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN 2/ allocate ata_port and schedule port probe in DISCE_PROBE ...to: 1/ allocate ata_port in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN 2/ allocate rphy in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN 3/ schedule port probe in DISCE_PROBE This ordering prevents PHYE_SIGNAL_LOSS_EVENTS from sneaking in to destrory ata devices before they have been fully initialized: BUG: unable to handle kernel paging request at 0000000000003b10 IP: [<ffffffffa0053d7e>] sas_ata_end_eh+0x12/0x5e [libsas] ... [<ffffffffa004d1af>] sas_unregister_common_dev+0x78/0xc9 [libsas] [<ffffffffa004d4d4>] sas_unregister_dev+0x4f/0xad [libsas] [<ffffffffa004d5b1>] sas_unregister_domain_devices+0x7f/0xbf [libsas] [<ffffffffa004c487>] sas_deform_port+0x61/0x1b8 [libsas] [<ffffffffa004bed0>] sas_phye_loss_of_signal+0x29/0x2b [libsas] ...and kills the awkward "sata domain_device briefly existing in the domain without an ata_port" state. Reported-by: Michal Kosciowski <michal.kosciowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: fix ata_eh clobbering ex_phys via smp_ata_check_readyDan Williams2012-04-231-1/+15
| | | | | | | | | | | | | | | | | | The check_ready implementation in the expander-attached ata device case polls on sas_ex_phy_discover(). The effect is that the ex_phy fields (critically ->attached_sas_addr) can change. When ata_eh ends and libsas comes along to revalidate the domain sas_unregister_devs_sas_addr() can fail to lookup devices to remove, or fail to re-add an ata device that ata_eh marked as disabled. So change the code to skip the sas_address and change count updates when ata_eh is active. Cc: Jack Wang <jack_wang@usish.com> Tested-by: Maciej Patelczyk <maciej.patelczyk@intel.com> Tested-by: Bartek Nowakowski <bartek.nowakowski@intel.com> Tested-by: Jacek Danecki <jacek.danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: unify domain_device sas_rphy lifetimesDan Williams2012-04-232-7/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the domain_device can out live the scsi_target we need the rphy to follow suit otherwise we run into issues like: BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 IP: [<ffffffffa011561b>] sas_ata_printk+0x43/0x6f [libsas] PGD 0 Oops: 0000 [#1] SMP CPU 1 Modules linked in: ses enclosure isci libsas scsi_transport_sas fuse sunrpc cpufreq_ondemand acpi_cpufreq freq_table mperf microcode pcspkr igb joydev iTCO_wdt ioatdma iTCO_vendor_support i2c_i801 i2c_core dca wmi hed ipv6 pata_acpi ata_generic [last unloaded: scsi_wait_scan] Pid: 129, comm: kworker/u:3 Not tainted 3.3.0-rc5-isci+ #1 Intel Corporation SandyBridge Platform/To be filled by O.E.M. RIP: 0010:[<ffffffffa011561b>] [<ffffffffa011561b>] sas_ata_printk+0x43/0x6f [libsas] RSP: 0018:ffff88042232dd70 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8804283165b8 RCX: ffff88042232dda0 RDX: ffff88042232dd78 RSI: ffff8804283165b8 RDI: ffffffffa01188d7 RBP: ffff88042232ddd0 R08: ffff880388454000 R09: ffff8803edfde1f8 R10: ffff8803edfde1f8 R11: ffff8803edfde1f8 R12: ffff880428316750 R13: ffff880388454000 R14: ffff8803f88b31d0 R15: ffff8803f8b21d50 FS: 0000000000000000(0000) GS:ffff88042ee20000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000050 CR3: 0000000001a05000 CR4: 00000000000406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kworker/u:3 (pid: 129, threadinfo ffff88042232c000, task ffff88042230c920) Stack: 0000000000000000 ffff880400000018 ffff88042232dde0 ffff88042232dda0 ffffffffa01188c4 ffff88042ee93af0 ffff88042232ddb0 ffffffff8100e047 ffff88042232de10 ffff880420e5a2c8 ffff8803f8b21d50 ffff8803edfde1f8 Call Trace: [<ffffffff8100e047>] ? load_TLS+0xb/0xf [<ffffffffa01156ad>] async_sas_ata_eh+0x66/0x95 [libsas] [<ffffffff810655e1>] async_run_entry_fn+0x9e/0x131 Reported-by: Tom Jackson <thomas.p.jackson@intel.com> Tested-by: Tom Jackson <thomas.p.jackson@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: fix sas_get_port_device regressionDan Williams2012-04-231-4/+5
| | | | | | | | | | | | | | | | | | Commit 899fcf4 "[SCSI] libsas: set attached device type and target protocols for local phys" setup 'phy' to be dereferenced after list_for_each_entry(phy, &port->phy_list, port_phy_el) (i.e. phy == &port->phy_list) resulting in reports like: BUG: unable to handle kernel NULL pointer dereference at 00000000000002b0 IP: [<ffffffffa00ce948>] sas_discover_domain+0x29e/0x4fb [libsas] ...fix by deferring sas_phy_set_target() to the end of sas_get_port_device(). Reported-by: Tom Jackson <thomas.p.jackson@intel.com> Tested-by: Tom Jackson <thomas.p.jackson@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: fix sas_find_bcast_phy() in the presence of 'vacant' physThomas Jackson2012-04-231-5/+12
| | | | | | | | | | | | If an expander reports 'PHY VACANT' for a phy index prior to the one that generated a BCN libsas fails rediscovery. Since a vacant phy is defined as a valid phy index that will never have an attached device just continue the search. Cc: <stable@vger.kernel.org> Signed-off-by: Thomas Jackson <thomas.p.jackson@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libsas: introduce sas_work to fix sas_drain_work vs sas_queue_workDan Williams2012-04-236-58/+47
| | | | | | | | | | | | | | When requeuing work to a draining workqueue the last work instance may not be idle, so sas_queue_work() must not touch work->entry. Introduce sas_work with a drain_node list_head to have a private list for collecting work deferred due to drain collision. Fixes reports like: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff810410d4>] process_one_work+0x2e/0x338 Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* Merge tag 'scsi-misc' of ↵Linus Torvalds2012-03-2210-897/+1345
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 SCSI updates from James Bottomley: "The update includes the usual assortment of driver updates (lpfc, qla2xxx, qla4xxx, bfa, bnx2fc, bnx2i, isci, fcoe, hpsa) plus a huge amount of infrastructure work in the SAS library and transport class as well as an iSCSI update. There's also a new SCSI based virtio driver." * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (177 commits) [SCSI] qla4xxx: Update driver version to 5.02.00-k15 [SCSI] qla4xxx: trivial cleanup [SCSI] qla4xxx: Fix sparse warning [SCSI] qla4xxx: Add support for multiple session per host. [SCSI] qla4xxx: Export CHAP index as sysfs attribute [SCSI] scsi_transport: Export CHAP index as sysfs attribute [SCSI] qla4xxx: Add support to display CHAP list and delete CHAP entry [SCSI] iscsi_transport: Add support to display CHAP list and delete CHAP entry [SCSI] pm8001: fix endian issue with code optimization. [SCSI] pm8001: Fix possible racing condition. [SCSI] pm8001: Fix bogus interrupt state flag issue. [SCSI] ipr: update PCI ID definitions for new adapters [SCSI] qla2xxx: handle default case in qla2x00_request_firmware() [SCSI] isci: improvements in driver unloading routine [SCSI] isci: improve phy event warnings [SCSI] isci: debug, provide state-enum-to-string conversions [SCSI] scsi_transport_sas: 'enable' phys on reset [SCSI] libsas: don't recover end devices attached to disabled phys [SCSI] libsas: fixup target_port_protocols for expanders that don't report sata [SCSI] libsas: set attached device type and target protocols for local phys ...
| * [SCSI] libsas: don't recover end devices attached to disabled physDan Williams2012-02-293-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If userspace has decided to disable a phy the kernel should honor that and not inadvertantly re-enable the phy via error recovery. This is more straightforward in the sata case where link recovery (via libata-eh) is separate from sas_task cancelling in libsas-eh. Teach libsas to accept -ENODEV as a successful response from I_T_nexus_reset ('successful' in terms of not escalating further). This is a more comprehensive fix then "libsas: don't recover 'gone' devices in sas_ata_hard_reset()", as it is no longer sata-specific. aic94xx does check the return value from sas_phy_reset() so if the phy is disabled we proceed with clearing the I_T_nexus. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] libsas: fixup target_port_protocols for expanders that don't report sataDan Williams2012-02-291-0/+2
| | | | | | | | | | | | | | | | | | If discovery returns 0 for target_port_protocols but shows an attached sata device, just report SAS_PROTOCOL_SATA in the identify data so userspace can reliably search for sata devices in the domain. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] libsas: set attached device type and target protocols for local physDan Williams2012-02-293-4/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before: $ cat /sys/class/sas_phy/phy-6\:3/device_type none $ cat /sys/class/sas_phy/phy-6\:3/target_port_protocols none After: $ cat /sys/class/sas_phy/phy-6\:3/device_type end device $ cat /sys/class/sas_phy/phy-6\:3/target_port_protocols sata Also downgrade the phy_list_lock to _irq instead of _irqsave since libsas will never call sas_get_port_device with interrupts disbled. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] libsas: revert ata srstDan Williams2012-02-291-38/+0
| | | | | | | | | | | | | | | | | | | | | | libata issues follow up srsts when the controller has a hard time recording the signature-fis after a reset, or if the link supports port multipliers. libsas does not support port multipliers and no current libsas lldds appear to need help retrieving the signature fis. Revert it for now to remove confusion. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] libsas: fix lifetime of SAS_HA_FROZENDan Williams2012-02-291-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Until all sas_tasks are known to no longer be in-flight this flag gates late completions from colliding with error handling. However, it must be cleared prior to the submission of scsi_send_eh_cmnd() requests, otherwise those commands will never be completed correctly. This was spotted by slub debug: ============================================================================= BUG sas_task: Objects remaining on kmem_cache_close() ----------------------------------------------------------------------------- INFO: Slab 0xffffea001f0eba00 objects=34 used=1 fp=0xffff8807c3aecb00 flags=0x8000000000004080 Pid: 22919, comm: modprobe Not tainted 3.2.0-isci+ #2 Call Trace: [<ffffffff810fcdcd>] slab_err+0xb0/0xd2 [<ffffffff810e1c50>] ? free_percpu+0x31/0x117 [<ffffffff81100122>] ? kzalloc+0x14/0x16 [<ffffffff81100122>] ? kzalloc+0x14/0x16 [<ffffffff81100486>] kmem_cache_destroy+0x11d/0x270 [<ffffffffa0112bdc>] sas_class_exit+0x10/0x12 [libsas] [<ffffffff81078fba>] sys_delete_module+0x1c4/0x23c [<ffffffff814797ba>] ? sysret_check+0x2e/0x69 [<ffffffff8126479e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff81479782>] system_call_fastpath+0x16/0x1b INFO: Object 0xffff8807c3aed280 @offset=21120 INFO: Allocated in sas_alloc_task+0x22/0x90 [libsas] age=4615311 cpu=2 pid=12966 __slab_alloc.clone.3+0x1d1/0x234 kmem_cache_alloc+0x52/0x10d sas_alloc_task+0x22/0x90 [libsas] sas_queuecommand+0x20e/0x230 [libsas] scsi_send_eh_cmnd+0xd1/0x30c scsi_eh_try_stu+0x4f/0x6b scsi_eh_ready_devs+0xba/0x6ef sas_scsi_recover_host+0xa35/0xab1 [libsas] scsi_error_handler+0x14b/0x5fa kthread+0x9d/0xa5 kernel_thread_helper+0x4/0x10 Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] libsas: async ata scanningDan Williams2012-02-294-40/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | libsas ata error handling is already async but this does not help the scan case. Move initial link recovery out from under host->scan_mutex, and delay synchronization with eh until after all port probe/recovery work has been queued. Device ordering is maintained with scan order by still calling sas_rphy_add() in order of domain discovery. Since we now scan the domain list when invoking libata-eh we need to be careful to check for fully initialized ata ports. Acked-by: Jack Wang <jack_wang@usish.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] libsas: restore scan orderDan Williams2012-02-293-45/+32
| | | | | | | | | | | | | | | | | | | | | | ata devices are always scanned after ssp. Prior to the ata error handling reworks libsas would tend to scan devices in ascending expander phy order. Restore this ordering by deferring ssp discovery to a DISCE_PROBE event, and keep the probe order consistent with the discovery order, not the placement of sata devices. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] libsas: delete device on sas address changedDan Williams2012-02-291-0/+9
| | | | | | | | | | | | | | | | If the phy is attached to a new sas address unregister the first address before processing the new attachment. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] libsas: let libata recover links that fail to transmit initial sig-fisDan Williams2012-02-294-86/+170
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | libsas fails to discover all sata devices in the domain. If a device fails negotiation and does not transmit a signature fis the link needs recovery. libata already understands how to manage slow to come up links, so treat these conditions as ata device attach events for the purposes of creating an ata_port. This allows libata to manage retrying link bring up. Rediscovery is modified to be careful about checking changes in dev_type. It looks like libsas leaks old devices if the sas address changes, but that's a fix for another patch. Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] libsas: fix sas port namingDan Williams2012-02-291-1/+1
| | | | | | | | | | | | | | | | | | | | Make sas-port naming consistent with the expander-attached case whereby the phy-id is the last digit in the port name. Otherwise we get the random behavior of the allocation order. Reported-by: Patrick Thomson <patrick.s.thomson@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] libsas: improve debug statementsDan Williams2012-02-292-32/+85
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's difficult to determine which domain_device is triggering error recovery, so convert messages like: sas: ex 5001b4da000e703f phy08:T attached: 5001b4da000e7028 sas: ex 5001b4da000e703f phy09:T attached: 5001b4da000e7029 ... ata7: sas eh calling libata port error handler ata8: sas eh calling libata port error handler ...into: sas: ex 5001517e85cfefff phy05:T:9 attached: 5001517e85cfefe5 (stp) sas: ex 5001517e3b0af0bf phy11:T:8 attached: 5001517e3b0af0ab (stp) ... sas: ata7: end_device-21:1: dev error handler sas: ata8: end_device-20:0:5: dev error handler which shows attached link rate, device type, and associates a domain_device with its ata_port id to correlate messages emitted from libata-eh. As Doug notes, we can also take the opportunity to clarify expander phy routing capabilities. [dgilbert@interlog.com: clarify table2table with 'U'] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] libsas: kill spurious sas_put_deviceMaciej Trela2012-02-291-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | Holdover from a patch rework, prior to the addition of SAS_DEV_DESTROY we were holding a reference while the destruct was pending in case the domain was torn down before the desctruct event ran. That case is covered by SAS_DEV_DESTROY, and the sas_put_device() just corrupts freed memory, or worse frees the memory while another agent holds a reference. Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] libsas: fix sas_unregister_ports vs sas_drain_workDan Williams2012-02-293-13/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to hold drain_mutex across the unregistration as port down events queue device removal as chained events, so we need to make sure no other drainers are active. [ 1118.673968] WARNING: at kernel/workqueue.c:996 __queue_work+0x11a/0x326() [ 1118.681982] Hardware name: S2600CP [ 1118.686193] Modules linked in: isci(-) libsas scsi_transport_sas nls_utf8 ipv6 uinput sg iTCO_wdt iTCO_vendor_support i2c_i801 i2c_core ioatdma dca sd_mod sr_mod cdrom ahci libahci libata [last unloaded: scsi_transport_sas] [ 1118.709893] Pid: 6831, comm: rmmod Not tainted 3.2.0-isci+ #1 [ 1118.716727] Call Trace: [ 1118.719867] [<ffffffff8103e9f5>] warn_slowpath_common+0x85/0x9d [ 1118.727000] [<ffffffff8103ea27>] warn_slowpath_null+0x1a/0x1c [ 1118.733942] [<ffffffff81056d44>] __queue_work+0x11a/0x326 [ 1118.740481] [<ffffffff81056f99>] queue_work_on+0x1b/0x22 [ 1118.746925] [<ffffffff81057106>] queue_work+0x37/0x3e [ 1118.753105] [<ffffffffa0120e05>] ? sas_discover_event+0x55/0x82 [libsas] [ 1118.761094] [<ffffffff813217c3>] scsi_queue_work+0x42/0x44 [ 1118.767717] [<ffffffffa0120e19>] sas_discover_event+0x69/0x82 [libsas] [ 1118.775509] [<ffffffffa0120f5b>] sas_unregister_dev+0xc3/0xcc [libsas] [ 1118.783319] [<ffffffffa0120fae>] sas_unregister_domain_devices+0x4a/0xc8 [libsas] [ 1118.792731] [<ffffffffa0120071>] sas_deform_port+0x60/0x1a6 [libsas] [ 1118.800339] [<ffffffffa01201ea>] sas_unregister_ports+0x33/0x44 [libsas] [ 1118.808342] [<ffffffffa011f7e5>] sas_unregister_ha+0x41/0x6b [libsas] [ 1118.816055] [<ffffffffa0134055>] isci_unregister+0x22/0x4d [isci] [ 1118.823384] [<ffffffffa0143040>] isci_pci_remove+0x2e/0x60 [isci] Reported-by: Jacek Danecki <jacek.danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] libsas: route local link resets through ata-ehDan Williams2012-02-293-20/+37
| | | | | | | | | | | | | | | | | | Similar to the conversion of the transport-class reset we want bsg initiated resets to be managed by libata. Reported-by: Jacek Danecki <jacek.danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] libsas: fix mixed topology recoveryDan Williams2012-02-292-12/+9
| | | | | | | | | | | | | | | | | | | | If we have a domain with sas and sata devices there may still be sas recovery actions to take after peeling off the commands to send to libata. Reported-by: Andrzej Jakowski <andrzej.jakowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] libsas: close scsi_remove_target() vs libata-eh raceDan Williams2012-02-293-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ata_port lifetime in libata follows the host. In libsas it follows the scsi_target. Once scsi_remove_device() has caused all commands to be completed it allows scsi_remove_target() to immediately proceed to freeing the ata_port causing bug reports like: [ 848.393333] BUG: spinlock bad magic on CPU#4, kworker/u:2/5107 [ 848.400262] general protection fault: 0000 [#1] SMP [ 848.406244] CPU 4 [ 848.408310] Modules linked in: nls_utf8 ipv6 uinput i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support ioatdma dca sg sd_mod sr_mod cdrom ahci libahci isci libsas libata scsi_transport_sas [last unloaded: scsi_wait_scan] [ 848.432060] [ 848.434137] Pid: 5107, comm: kworker/u:2 Not tainted 3.2.0-isci+ #8 Intel Corporation S2600CP/S2600CP [ 848.445310] RIP: 0010:[<ffffffff8126a68c>] [<ffffffff8126a68c>] spin_dump+0x5e/0x8c [ 848.454787] RSP: 0018:ffff8807f868dca0 EFLAGS: 00010002 [ 848.461137] RAX: 0000000000000048 RBX: ffff8807fe86a630 RCX: ffffffff817d0be0 [ 848.469520] RDX: 0000000000000000 RSI: ffffffff814af1cf RDI: 0000000000000002 [ 848.477959] RBP: ffff8807f868dcb0 R08: 00000000ffffffff R09: 000000006b6b6b6b [ 848.486327] R10: 000000000003fb8c R11: ffffffff81a19448 R12: 6b6b6b6b6b6b6b6b [ 848.494699] R13: ffff8808027dc520 R14: 0000000000000000 R15: 000000000000001e [ 848.503067] FS: 0000000000000000(0000) GS:ffff88083fd00000(0000) knlGS:0000000000000000 [ 848.512899] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 848.519710] CR2: 00007ff77d001000 CR3: 00000007f7a5d000 CR4: 00000000000406e0 [ 848.528072] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 848.536446] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 848.544831] Process kworker/u:2 (pid: 5107, threadinfo ffff8807f868c000, task ffff8807ff348000) [ 848.555327] Stack: [ 848.557959] ffff8807fe86a630 ffff8807fe86a630 ffff8807f868dcd0 ffffffff8126a6e0 [ 848.567072] ffffffff817c142f ffff8807fe86a630 ffff8807f868dcf0 ffffffff8126a703 [ 848.576190] ffff8808027dc520 0000000000000286 ffff8807f868dd10 ffffffff814af1bb [ 848.585281] Call Trace: [ 848.588409] [<ffffffff8126a6e0>] spin_bug+0x26/0x28 [ 848.594357] [<ffffffff8126a703>] do_raw_spin_unlock+0x21/0x88 [ 848.601283] [<ffffffff814af1bb>] _raw_spin_unlock_irqrestore+0x2c/0x65 [ 848.609089] [<ffffffffa001c103>] ata_scsi_port_error_handler+0x548/0x557 [libata] [ 848.618331] [<ffffffff81061813>] ? async_schedule+0x17/0x17 [ 848.625060] [<ffffffffa004f30f>] async_sas_ata_eh+0x45/0x69 [libsas] [ 848.632655] [<ffffffff810618aa>] async_run_entry_fn+0x97/0x125 [ 848.639670] [<ffffffff81057439>] process_one_work+0x207/0x38d [ 848.646577] [<ffffffff8105738c>] ? process_one_work+0x15a/0x38d [ 848.653681] [<ffffffff810576f7>] worker_thread+0x138/0x21c [ 848.660305] [<ffffffff810575bf>] ? process_one_work+0x38d/0x38d [ 848.667493] [<ffffffff8105b098>] kthread+0x9d/0xa5 [ 848.673382] [<ffffffff8106e1bd>] ? trace_hardirqs_on_caller+0x12f/0x166 [ 848.681304] [<ffffffff814b7704>] kernel_thread_helper+0x4/0x10 [ 848.688324] [<ffffffff814af534>] ? retint_restore_args+0x13/0x13 [ 848.695530] [<ffffffff8105affb>] ? __init_kthread_worker+0x5b/0x5b [ 848.702929] [<ffffffff814b7700>] ? gs_change+0x13/0x13 [ 848.709155] Code: 00 00 48 8d 88 38 04 00 00 44 8b 80 84 02 00 00 31 c0 e8 cf 1b 24 00 41 83 c8 ff 44 8b 4b 08 48 c7 c1 e0 0b 7d 81 4d 85 e4 74 10 <45> 8b 84 24 84 02 00 00 49 8d 8c 24 38 04 00 00 8b 53 04 48 89 [ 848.732467] RIP [<ffffffff8126a68c>] spin_dump+0x5e/0x8c [ 848.738905] RSP <ffff8807f868dca0> [ 848.743743] ---[ end trace 143161646eee8caa ]--- ...so arrange for the ata_port to have the same end of life as the domain device. Reported-by: Marcin Tomczak <marcin.tomczak@intel.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
OpenPOWER on IntegriCloud