summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/aacraid
Commit message (Collapse)AuthorAgeFilesLines
...
| * [SCSI] aacraid: prevent copy_from_user() BUG!Mark Salyzyn2008-07-121-0/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Seen: kernel BUG at arch/i386/lib/usercopy.c:872 under a 2.6.18-8.el5 kernel. Traced it to a garbage-in/garbage-out ioctl condition in the aacraid driver. Adaptec's special ioctl scb passthrough needs to check the validity of the individual scatter gather count fields to the maximum the adapter supports. Doing so will have the side effect of preventing copy_from_user() from bugging out while populating the dma buffers. This is a hardening effort, issue was triggered by an errant version of the management tools and thus the BUG should not be seen in the field. [jejb: fixed up compile failure] Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] aacraid: linit.c make aac_show_serial_number staticHarvey Harrison2008-06-051-1/+1
| | | | | | | | | | | | | | | | drivers/scsi/aacraid/linit.c:865:9: warning: symbol 'aac_show_serial_number' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* | aacraid: cdev lock_kernel() pushdownJonathan Corbet2008-06-201-0/+3
|/ | | | Signed-off-by: Jonathan Corbet <corbet@lwn.net>
* [SCSI] aacraid: Add Power Management supportMark Salyzyn2008-05-024-11/+154
| | | | | | | | | | | | | For firmware that supports the feature(s), add the ability to start or stop an array using the associated SCSI commands, to automatically manage the spin-up of an array on new I/O reporting back the appropriate check conditions and actions in cooperation with the normal timeout mechanisms and enable the blackout period management in the Firmware associated with the background spin-down of the arrays when the Firmware times out and deems the arrays as idle. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: Fix jbod operations scan issuesMark Salyzyn2008-05-022-14/+34
| | | | | | | | | | | | | | As JBOD devices (really just Simple Single Drive Volumes exported to the SCSI channel) are managed, they fail to update correctly when the driver triggers a SCSI scan. In addition, the ability to change multiple arrays or JBODs at the same time was resulting in dropped scans, set up a mechanism to issue a list of single target scans on a single configuration change notification from the Firmware. Performed some additional sundry cosmetic code style cleanups. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: Fix warning about macro side-effectsMark Salyzyn2008-05-021-2/+2
| | | | | | | | On some compile environments, warnings are produced regarding the usage of aac_logical_to_phys macro. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: Fix down_interruptible() to check the return value correctlyMark Salyzyn2008-05-021-1/+1
| | | | | | | | | | | | | | | | | On Apr 21, 2008, at 8:42 PM, Yinghai Lu wrote: > bisected to: > > commit e6990c6448ca9359b6d4ad027c0a6efbf4379e64 > Author: Mark Salyzyn <Mark_Salyzyn@adaptec.com> > Date: Mon Apr 14 14:20:16 2008 -0400 > > [SCSI] aacraid: Fix down_interruptible() to check the return value The return value for down_interruptible was incorrectly checked! updated patch enclosed. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds2008-04-213-43/+56
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: (36 commits) SCSI: convert struct class_device to struct device DRM: remove unused dev_class IB: rename "dev" to "srp_dev" in srp_host structure IB: convert struct class_device to struct device memstick: convert struct class_device to struct device driver core: replace remaining __FUNCTION__ occurrences sysfs: refill attribute buffer when reading from offset 0 PM: Remove destroy_suspended_device() Firmware: add iSCSI iBFT Support PM: Remove legacy PM (fix) Kobject: Replace list_for_each() with list_for_each_entry(). SYSFS: Explicitly include required header file slab.h. Driver core: make device_is_registered() work for class devices PM: Convert wakeup flag accessors to inline functions PM: Make wakeup flags available whenever CONFIG_PM is set PM: Fix misuse of wakeup flag accessors in serial core Driver core: Call device_pm_add() after bus_add_device() in device_add() PM: Handle device registrations during suspend/resume block: send disk "change" event for rescan_partitions() sysdev: detect multiple driver registrations ... Fixed trivial conflict in include/linux/memory.h due to semaphore header file change (made irrelevant by the change to mutex).
| * SCSI: convert struct class_device to struct deviceTony Jones2008-04-193-43/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | Convert asm/semaphore.h users to linux/semaphore.hMatthew Wilcox2008-04-183-3/+3
| | | | | | | | Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
* | drivers: Remove unnecessary inclusions of asm/semaphore.hMatthew Wilcox2008-04-185-5/+0
|/ | | | | | | | | None of these files use any of the functionality promised by asm/semaphore.h. It's possible that they rely on it dragging in some unrelated header file, but I can't build all these files, so we'll have fix any build failures as they come up. Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
* [SCSI] aacraid: Do not describe check_reset parameter with its valuePaul Bolle2008-04-161-1/+1
| | | | | | | | Describe check_reset parameter with its name (and not its value) Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: Fix down_interruptible() to check the return valueMark Salyzyn2008-04-161-3/+5
| | | | | | | | | Instead of ignoring the return value in aac_fib_send() return 2 to indicate to the layers above that fib transmission was aborted due to timeout. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid, ips: leX_add_cpu conversionMarcin Slusarz2008-04-071-1/+1
| | | | | | | | | | | | | | replace all: little_endian_variable = cpu_to_leX(leX_to_cpu(little_endian_variable) + expression_in_cpu_byteorder); with: leX_add_cpu(&little_endian_variable, expression_in_cpu_byteorder); generated with semantic patch Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: "Salyzyn, Mark" <Mark_Salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: use sg buffer copy helper functionsFUJITA Tomonori2008-04-071-32/+17
| | | | | | | | This replaces aac_internal_transfer with scsi_sg_copy_to/from_buffer. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: READ_CAPACITY_16 shouldn't trust allocation length in cdbFUJITA Tomonori2008-04-071-11/+11
| | | | | | | | | | | | | | | When aacraid spoofs READ_CAPACITY_16, it assumes that the data length in the sg list is equal to allocation length in cdb. But sg can put any value in scb so the driver needs to check both the data length in the sg list and allocation length in cdb. If allocation length is larger than the response length that the driver expects, it clears the data buffer in the sg list to zero but it doesn't need to do. Just setting resid is fine. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: informational sysfs value correctionsSalyzyn, Mark2008-02-111-6/+7
| | | | | | | | | Some sysfs problems reported. The serial number on late model controllers was truncated. Non-DASD devices (tapes and CDROMs) were showing up as JBOD in the level report on the physical channel. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: ignore adapter reset check polaritySalyzyn, Mark2008-02-113-8/+10
| | | | | | | | The Adapter's Ignore Reset flag and insmod parameter boolean polarity is incorrect in the driver. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: add optional MSI supportSalyzyn, Mark2008-02-115-33/+67
| | | | | | | | | | Added support for MSI utilizing the aacraid.msi=1 parameter. This patch adds some localized or like-minded janitor fixes. Since the default is disabled, there is no impact on the code paths unless the customer wishes to experiment with the MSI performance. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: do not set valid bit in sense informationSalyzyn, Mark2008-02-071-51/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Luben Tuikov [mailto:ltuikov@yahoo.com] sez: > Just as in your case and Tony's case, which I presume > uses the same RAID firmware vendor, it would've > probably been better if the RAID firmware vendor > fixed the firmware to not set the VALID bit if the > INFORMATION field is not valid. Point taken regarding the aacraid driver. Dropped the VALID bit, and then did some cleanup/simplification of the set_sense procedure and the associated parameters. Mike did some preliminary tests when the VALID bit was dropped before the 'Re: [PATCH] [SCSI] sd: make error handling more robust' patches came on the scene. The change in the SCSI subsystem does make this enclosed aacraid patch unnecessary, so this aacraid patch is merely post battle ground cleanup. If the simplification is an issue, repugnant, too much for a back-port to the stable trees or clouds the point, this patch could be happily distilled down to: diff -ru a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c --- a/drivers/scsi/aacraid/aachba.c 2008-02-06 16:26:45.834938955 -0500 +++ b/drivers/scsi/aacraid/aachba.c 2008-02-06 16:32:01.109035329 -0500 @@ -865,7 +865,7 @@ u32 residue) { - sense_buf[0] = 0xF0; /* Sense data valid, err code 70h (current error) */ + sense_buf[0] = 0x70; /* Sense data invalid, err code 70h (current error) */ sense_buf[1] = 0; /* Segment number, always zero */ if (incorrect_length) { Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: pci_set_dma_max_seg_size opened up for late model controllersSalyzyn, Mark2008-02-071-15/+13
| | | | | | | | | | | | | | This patch ensures that the modern adapters get a maximum sg segment size on par with the maximum transfer size. Added some localized janitor fixes to the discussion patch I used with Fujita. FUJITA Tomonori [mailto:fujita.tomonori@lab.ntt.co.jp] sez: > I think that setting the proper maximum segment size for the late > model cards (as you did above) makes sense. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: fib context lock for management ioctls (take 2)Salyzyn, Mark2008-02-071-12/+14
| | | | | | | | | | | | The first patch (a119ee8ee3045bf559d4cf02d72b112f3de2a15b) was a bit too aggressive and nested the locks (!) unit testing was in error. This patch was reverted by 203a512f0976e8ba85df36d76b40af6c80239121. This new patch should fix the locks correctly. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* iommu sg merging: aacraid: use pci_set_dma_max_seg_sizeFUJITA Tomonori2008-02-051-3/+6
| | | | | | | | | | | | | This sets the segment size limit properly via pci_set_dma_max_seg_size and remove blk_queue_max_segment_size because scsi-ml calls it. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Acked-by: Jens Axboe <jens.axboe@oracle.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [SCSI] Revert "[SCSI] aacraid: fib context lock for management ioctls"James Bottomley2008-01-301-17/+12
| | | | | | | | This reverts commit a119ee8ee3045bf559d4cf02d72b112f3de2a15b. Adaptec found this was causing system lockups. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] remove use_sg_chainingJames Bottomley2008-01-301-1/+0
| | | | | | | | | | | With the sg table code, every SCSI driver is now either chain capable or broken (or has sg_tablesize set so chaining is never activated), so there's no need to have a check in the host template. Also tidy up the code by moving the scatterlist size defines into the SCSI includes and permit the last entry of the scatterlist pools not to be a power of two. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: fib context lock for management ioctlsSalyzyn, Mark2008-01-251-12/+17
| | | | | | | | | | | | | Alan noticed the lack of locking surrounding the driver's dealings with the fib context managed by the trio of ioctls that are used by the RAID management applications to retrieve Adapter Initiated FIBs. I merely expanded the fib lock to include the fib context. There have been no field reports of any issues generally because the applications are relatively static and do not come and go often enough to stress this area. I bloated this patch a little with some space junk. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: add Voodoo Lite class of cards.Salyzyn, Mark2008-01-234-6/+44
| | | | | | | | | | | | | | | | | | | The cards being added are supported in a limited sense already through family matching, but we needed to add some functionality to the driver to expose selectively the physical drives. These Physical drives are specifically marked to not be part of any array and thus are declared JBODs (Just a Bunch Of Drives) for generic SCSI access. We report that this is the second patch in a set of two, but merely depends on the stand-alone functionality of the first patch which adds in that case the ability to report a driver feature flag via sysfs. We leverage that functionality by reporting that this driver now supports this new JBOD feature for the controller so that the array management applications may react accordingly and guide the user as they manage the controller. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: add new driver features flagsSalyzyn, Mark2008-01-231-0/+25
| | | | | | | | | | | | | | | | | | | Feature enhancement, adding a 'flags' entry that will reside in the host controller's tree, with a newline separated list of arbitrary ascii named features that indicate whether the combination of driver and controller has support for said feature. Breaking from the one-line output typical of sysfs entries, newline was added to tailor for grep, or simple gets line by line string match within an application. I added one for a compiler time check for existence of debug print output, one for an optional manifest defined enhanced status reporting in the logs, and one for runtime reporting whether the controller and driver supports arrays larger than 2TB. Adaptec's storage management software uses the last flag to determine whether to make available the creation of arrays larger than 2TB, otherwise a warning is posted. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: remove pigs in spaceSalyzyn, Mark2008-01-235-464/+458
| | | | | | | | | | | | | | | | | | I was amazed at how much embedded space was present in the aacraid driver source files. Just selected five files from the set to clean up for now and the attached patch swelled to 73K in size! - Removed trailing space or tabs - Removed spaces embedded within tabs - Replaced leading 8 spaces with tabs - Removed spaces before ) - Removed ClusterCommand as it was unused (noticed it as one triggered by above) - Replaced scsi_status comparison with 0x02, to compare against SAM_STATUS_CHECK_CONDITION. - Replaced a long series of spaces with tabs - Replaced some simple if...defined() with ifdef/ifndef Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: fix security weaknessAlan Cox2008-01-231-0/+2
| | | | | | | | | | | | | | | | | | | | | | Actually there are several but one is trivially fixed 1. FSACTL_GET_NEXT_ADAPTER_FIB ioctl does not lock dev->fib_list but needs to 2. Ditto for FSACTL_CLOSE_GET_ADAPTER_FIB 3. It is possible to construct an attack via the SRB ioctls where the user obtains assorted elevated privileges. Various approaches are possible, the trivial ones being things like writing to the raw media via scsi commands and the swap image of other executing programs with higher privileges. So the ioctls should be CAP_SYS_RAWIO - at least all the FIB manipulating ones. This is a bandaid fix for #3 but probably the ioctls should grow their own capable checks. The other two bugs need someone competent in that driver to fix them. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: replace '<?:' with min_t()Salyzyn, Mark2008-01-231-24/+16
| | | | | | | The promised min_t() cleanup. Purely cosmetic. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] replace sizeof sense_buffer with SCSI_SENSE_BUFFERSIZEFUJITA Tomonori2008-01-231-16/+16
| | | | | | | | | This replaces sizeof sense_buffer with SCSI_SENSE_BUFFERSIZE in several LLDs. It's a preparation for the future changes to remove sense_buffer array in scsi_cmnd structure. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: SMC vendor identificationSalyzyn, Mark2008-01-231-10/+15
| | | | | | | | | | | | | | | | | | Due to an internal limit associated with the AdapterTypeText field, SMC required a product ID that overloaded the combined vendor and product ID. A decision was made to ship the SMC products without a vendor string dropping the defacto space that used to delineate vendor and product to boot. To correct this, we needed to adjust the code in the driver to parse out the vendor and product strings for the adapter. We match of 'AOC' in the AdapterTypeText, if so we set the vendor to SMC and place the entire AdapterTypeText into the product field. This only affects the cosmetic presentation of the Adapter vendor and product in the logs and in sysfs. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: respond to enclosure service eventsSalyzyn, Mark2008-01-232-22/+79
| | | | | | | | | | | | | Added support to respond to enclosure service events (controller AIFs) to add, online or offline physical targets reported to sg. Also added online and offlining of arrays. Removed an automatic variable definition in a sub block that hid an earlier definition, determined to be inert as the sub-block use did not interfere. Bumped the driver versioning to stamp the addition of this feature. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: add call to flush_kernel_dcache_pageSalyzyn, Mark2008-01-231-1/+2
| | | | | | | | Some architectures require a call to flush_kernel_dcache_page for processor spoofed DMA operations. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: improve queue balancingSalyzyn, Mark2008-01-231-10/+13
| | | | | | | | | | | | | | | | | | | | The adapter queue is divided up equally to all the arrays to prevent command starvation to any individual array. On the other hand, physical targets are only granted a queue depth of one each. The code prior to this patch used to deal with the incremental discovery of targets, but the driver knows how many arrays are present prior to the scan so this knowledge is used to generate a better estimate for the queue depth. Remove the capability of 'physical=0' from preventing access to the class of adapters that have the RAID/SCSI mode of operation since none of the physicals on the SCSI channel are candidates ever for an array. As always, the user can override this default queue depth policy by making the appropriate adjustments utilizing sysfs. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: OS panic after Adapter panic (hardening).Salyzyn, Mark2008-01-234-3/+25
| | | | | | | | | | | | | | | | | | | | In experiments in the lab we managed to trigger an Adapter firmware panic (BlinkLED) coincidentally while several pass-through ioctl command from the management software were outstanding on a bug only present on a class of RAID Adapters that require a hardware reset rather than a commanded reset. The net result was an attempt to time out the management software command as if it came from the SCSI layer resulting in an OS panic. Adapters that use commanded reset, management commands are returned failed by the Adapter correctly. The adapter firmware panic that resulted in this condition was also resolved, and there were no adapters in the field with this specific firmware bug so we do not expect any field reports. This is a rare or unlikely corner condition, and no reports have ever been forwarded from the field. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: fix multiple definition of automatic variable warning.Salyzyn, Mark2008-01-231-5/+4
| | | | | | | | | | The 'entry' automatic variable was defined at the top and within a block that uses it, removed the definition from the block that uses it. Some cosmetic changes were made while in the same file. This patch should be inert. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: fix big endian issuesSalyzyn, Mark2008-01-236-24/+22
| | | | | | | | | | | | | | | | Big endian systems issues discovered in the aacraid driver. Somewhat reverses a patch from November 7th of last year that removed swap operations because they formerly were being assigned to an u8 array when they should have been assigned to an le32 array. This patch is largely inert for any little endian processor architecture. It resolves a bug in delivering the BlinkLED AIF event to registered applications when the adapter or associated hardware was reset due to ill health. A rare corner case occurrence, also largely unnoticed by any as it was a new (untested!) feature. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: variable redefinition hides earlier warningSalyzyn, Mark2008-01-231-5/+5
| | | | | | | | | The parameter 'info' is reused, renamed the second to sinfo to represent supplemental adapter info, to suppress compile warning message. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: add sysfs report of RAID levelSalyzyn, Mark2008-01-233-1/+32
| | | | | | | | Report the RAID level string for the SCSI device representing the array. Report is in /sys/class/scsi_device/#:#:#:#/device/level. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: add parameter to control FUA and SYNCHRONIZE_CACHE policySalyzyn, Mark2008-01-233-12/+30
| | | | | | | | | | | | | | | | | aacraid.cache parameter, Disable Queue Flush commands: bit 0 - Disable FUA in WRITE SCSI commands bit 1 - Disable SYNCHRONIZE_CACHE SCSI command bit 2 - Disable only if Battery not protecting adapter supplied Cache e.g.: aacraid.cache=7 will disable the FUA and SYNCHRONIZE_CACHE commands if the adapter has reported that it's cache is battery backed up. This parameter permits experimentation with tradeoffs between performance and caching policy. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: fix driver failure with Dell PowerEdge Expandable RAID ↵Salyzyn, Mark2008-01-114-22/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Controller 3/Di As reported in http://bugzilla.kernel.org/show_bug.cgi?id=3D9133 it was discovered that the PERC line of controllers lacked a key 64 bit ScatterGather capable SCSI pass-through function. The adapters are still capable of 64 bit ScatterGather I/O commands, but these two can not be mixed. This problem was exacerbated by the introduction of the SCSI Generic access to the DASD physical devices. The fix for users before this patch is applied is aacraid.dacmode=3D0 on the kernel command line to disable 64 bit I/O. The enclosed patch introduces a new adapter quirk and tries to limp along by enabling pass-through in situations where memory is 32 bit addressable on 64 bit machines, or disable the pass-through functions altogether. I expect that the check for 32 bit addressable memory to be controversial in that it can be incorrect in non-Dell non-Intel systems that PERC would never be installed under, the alternative is to disable pass-through in all cases which could be reported as another regression. Pass-through is used for SCSI Generic access to the physical devices, or for the management applications to properly function. In systems where this patch has disabled pass-through because it is unsupportable in combination with I/O performance, the user can choose to enable pass-through by turning off dacmode (aacraid.dacmode=3D0) or limiting the discovered kernel memory (mem=3D4G) with an associated loss in runtime performance. If we chose instead to turn off 64 bit dacmode for the adapters with this quirk, then this would be reported as another regression. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: don't assign cpu_to_le32(int) to u8Christoph Hellwig2008-01-115-37/+37
| | | | | | | | | | | | | | | | | | | | | On Wed, Nov 07, 2007 at 01:51:44PM -0500, Salyzyn, Mark wrote: > Christoph Hellwig [mailto:hch@infradead.org] sez: > > Did anyone run the driver through sparse to see if we have > > more issues like this? > > There are some warnings from sparse, none like this one. I will deal > with the warnings ... Actually there are a lot of endianess warnings, fortunately most of them harmless. The patch below fixes all of them up (including the ones in the patch I replied to), except for aac_init_adapter which is really odd and I don't know what to do. [jejb fixed up rejections and checkpatch issues] Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Mark Salyzyn <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: forced reset overrideSalyzyn, Mark2008-01-114-13/+19
| | | | | | | | | | | | | | | | | | | | | | Some of our vendors have requested that our adapters ignore the hardware reset attempts during recovery and have enforced this with changes in Adapter Firmware. Some of our customers have requested the option to be able to reset the adapter under adverse adapter failure, we even had a few defects reported here considering it a regression that the Adapter could not be reset. This patch addresses this dichotomy. The user can force the adapter to be reset if it supports the IOP_RESET_ALWAYS command, in cases where the adapter has been programmed to ignore the reset, by setting the aacraid.check_reset parameter to a value of -1. The driver will not reset an Adapter that does not support the reset command(s). This patch also fixes and cleans up some of the logic associated with resetting the adapter. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: fix security weaknessAlan Cox2007-11-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | Actually there are several but one is trivially fixed 1. FSACTL_GET_NEXT_ADAPTER_FIB ioctl does not lock dev->fib_list but needs to 2. Ditto for FSACTL_CLOSE_GET_ADAPTER_FIB 3. It is possible to construct an attack via the SRB ioctls where the user obtains assorted elevated privileges. Various approaches are possible, the trivial ones being things like writing to the raw media via scsi commands and the swap image of other executing programs with higher privileges. So the ioctls should be CAP_SYS_RAWIO - at least all the FIB manipulating ones. This is a bandaid fix for #3 but probably the ioctls should grow their own capable checks. The other two bugs need someone competent in that driver to fix them. Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Mark Salyzyn <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: fix up le32 issues in BlinkLEDSalyzyn, Mark2007-11-071-1/+1
| | | | | Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: fix potential panic in thread stopSalyzyn, Mark2007-11-071-1/+2
| | | | | | | | | | | Got a panic in the threading code on an older kernel when the Adapter failed to load properly and driver shut down apparently before any threading had started, can not dupe. Expect that this may be relevant in the latest kernel, but not sure. This patch does no harm, and should alleviate the possibility of this panic. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: don't assign cpu_to_le32(constant) to u8Stephen Rothwell2007-11-071-3/+3
| | | | | | | | | | | | | | | Noticed on PowerPC allmod config build: drivers/scsi/aacraid/commsup.c:1342: warning: large integer implicitly truncated to unsigned type drivers/scsi/aacraid/commsup.c:1343: warning: large integer implicitly truncated to unsigned type drivers/scsi/aacraid/commsup.c:1344: warning: large integer implicitly truncated to unsigned type Also fix some whitespace on the changed lines. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Mark Salyzyn <mark_salyzyn@adaptec.com> Signed-off-by: James <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* fix abuses of ptrdiff_tAl Viro2007-10-293-8/+8
| | | | | | | | | | | | | | | | | | | | Use of ptrdiff_t in places like - if (!access_ok(VERIFY_WRITE, u_tmp->rx_buf, u_tmp->len)) + if (!access_ok(VERIFY_WRITE, (u8 __user *) + (ptrdiff_t) u_tmp->rx_buf, + u_tmp->len)) is wrong; for one thing, it's a bad C (it's what uintptr_t is for; in general we are not even promised that ptrdiff_t is large enough to hold a pointer, just enough to hold a difference between two pointers within the same object). For another, it confuses the fsck out of sparse. Use unsigned long or uintptr_t instead. There are several places misusing ptrdiff_t; fixed. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
OpenPOWER on IntegriCloud