summaryrefslogtreecommitdiffstats
path: root/drivers/s390/scsi
Commit message (Collapse)AuthorAgeFilesLines
* [SCSI] zfcp: Remove unnecessary warning messageChristof Schmitt2008-12-292-7/+1
| | | | | | | | | | | | Remove a message that was emitted for a port that could not initially be opened. This is a rare case when the port discovery hits an initiator port and only confuses the user with an initator port logged in the message. Remove the whole special case: The failed "open port" request triggers required follow-up actions anyway. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Acked-by: Felix Beck <felix@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Add support for unchained FSF requestsChristof Schmitt2008-12-296-40/+61
| | | | | | | | | | | | Add the support to send CT and ELS requests as unchained FSF requests. This is required for older hardware and was somehow omitted during the cleanup of the FSF layer. The req_count and resp_count attributes are unused, so remove them instead of adding a special case for setting them. Also add debug data and a warning, when the ct request hits a limit. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Acked-by: Martin Petermann <martin@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Remove busid macroChristof Schmitt2008-12-293-8/+6
| | | | | | | | | With the change to the dev_ message macros, the macro to get the busid is only used in a few places. Remove it and directly get the dev_name from the device. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: remove DID_DID flagChristof Schmitt2008-12-294-9/+4
| | | | | | | | | | | The port flag DID_DID indicates whether we know the current id of the port. This is always set in parallel. Since the id 0 is invalid (because the port id 0 is invalid) we can remove the DID_DID flag: d_id of 0 indicates an invalid d_id != 0 is a valid one. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Acked-by: Felix Beck <felix@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Simplify mask lookups for incoming RSCNsChristof Schmitt2008-12-292-30/+15
| | | | | | | | | Use an array for looking up the mask corresponding to the 2-bit information instead of the switch/case. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Acked-by: Felix Beck <felix@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Remove initial device data from zfcp_dataChristof Schmitt2008-12-292-54/+45
| | | | | | | | | | | | The information from the kernel parameter is only needed during init. Keep the three pieces (busid, wwpn and lun) local to simplify the global zfcp_data structures. While at it, also remove the unused loglevel variable and give the module parameter variable a better name. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Acked-by: Felix Beck <felix@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: fix compile warningHeiko Carstens2008-12-291-1/+2
| | | | | | | | | | | | | | | Get rid of this one: drivers/s390/scsi/zfcp_erp.c: In function 'zfcp_erp_thread': drivers/s390/scsi/zfcp_erp.c:1400: warning: ignoring return value of 'down_interruptible', declared with attribute warn_unused_result zfcp_erp_thread is a kernel thread which can't receive any signals. So introduce a dummy variable and get rid of the warning. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Remove adapter listChristof Schmitt2008-12-293-28/+3
| | | | | | | | | | | After the latest changes, the list of FCP devices is only used to lookup the adapter for requests from the actcli tool. Change this to use the lookup function in the cio layer. Now we can remove the adapter list and have one place less to use the global config_lock. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Acked-by: Felix Beck <felix@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Simplify SBAL allocation to fix sparse warningsChristof Schmitt2008-12-291-17/+17
| | | | | | | | | | When waiting for a request claim the SBAL before waiting. This way, locking before each check of the free counter is not required and sparse does not emit warnings for the complicated locking scheme. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Acked-by: Felix Beck <felix@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: register with SCSI layer on ccw registrationSwen Schillig2008-12-292-7/+2
| | | | | | | | | | | Synchronize the registration and de-registration with the SCSI layer at CCW registration, de-registration. Before we registered with the SCSI layer on adapter activation. This way the reg and de-reg process is in balance. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Fix message line breakChristof Schmitt2008-12-291-1/+1
| | | | | | | | Move the closing parenthesis before the line break. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Acked-by: Felix Beck <felix@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [S390] convert zfcp printks to pr_xxx macros.Christof Schmitt2008-12-2510-3/+33
| | | | | Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers2008-12-251-2/+4
| | | | | | | | Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] zfcp: Report microcode level through service level interfaceChristof Schmitt2008-12-253-2/+20
| | | | | | | | | | Register zfcp with the new /proc/service_level interface to report the FCP microcode level. When the adapter goes offline or a channel path disappears, zfcp unregisters, since the microcode version might change and zfcp does not know about it. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [SCSI] zfcp: prevent double decrement on host_busy while being busySwen Schillig2008-12-011-1/+1
| | | | | | | | | | | | | The zfcp_scsi_queuecommand was not acting according to the standard when the respective unit was not available. In this case an -EBUSY was returned, which is not valid in itself, and in addition scsi_done was called. This combination is not allowed and was leading to a double finish of the request and therefor double decrement of the host_busy counter. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: fix deadlock between wq triggered port scan and ERPSwen Schillig2008-12-012-2/+2
| | | | | | | | | | | | | Waiting for the ERP to be finished in a task running in the global kernel work-queue is a bad idea, especially if the ERP needs to run another job in this work-queue before it can finish. -> deadlock. This patch removes the necessity to wait for a finished ERP from the scan task and moves the job scheduling to the end of the ERP. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: eliminate race between validation and lockingSwen Schillig2008-12-011-4/+7
| | | | | | | | | | | | | | The check of having a valid pointer was performed before the processing was secured by the lock. Between those two steps the pointer can turn invalid. During further processing another value is used (referenced by the pointer described above) as a function pointer which is never verified to be valid either, resulting under some circumstances in an invalid function call. This patch is fixing both issues. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: verify for correct rport state before scanning for SCSI devsSwen Schillig2008-12-011-1/+3
| | | | | | | | | Prevent a SCSI target scan for a rport which have turned invalid in the meantime. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: returning an ERR_PTR where a NULL value is expectedSwen Schillig2008-12-011-2/+6
| | | | | | | | | | | | Aborting a SCSI cmnd might requrie to send a abort_fsf_cmnd. If the creation of this fsf_req fails an ERR_PTR is returned where a NULL value would be expected as an error indicator. This ERR_PTR is dereferenced as valid fsf_req in succeeding processing leading to an error. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Fix opening of wka portsChristof Schmitt2008-12-012-1/+3
| | | | | | | | | | | Running two wka_port_get calls in parallel could issue two open_port requests, overwriting the port handle. Don't issue an open_port for the state PORT_OPENING, and only read the data from GOOD responses. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Acked-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: fix remote port status checkMartin Petermann2008-12-011-2/+1
| | | | | | | | | | | For an incoming RSCN it was checked by the ZFCP_STATUS_PORT_DID_DID define to re-open a remote port or to test the connection. Since this define was re-used it was also necessary to replace that define with ZFCP_STATUS_PORT_PHYS_OPEN. Signed-off-by: Martin Petermann <martin@linux.vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Fix hexdump data in s390dbf tracesChristof Schmitt2008-11-052-32/+18
| | | | | | | | | | | | | Fix multiple problems found in the hexdump data: - length calculation was wrong, traces were incomplete - FC payloads were dumped in different record than the output function tried to read - minor fixes in output - allow complete RSCN traces (up to 1024 bytes according to spec) Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: fix erp timeout cleanup for port open requestsMartin Petermann2008-11-051-0/+1
| | | | | | | | | | | | | If an open port fsf request times out (in erp) the corresponding erp_action member of the fsf request need to set to NULL. If the port structure will be removed later-on there will be still a reference in the fsf request to the non existing erp_action otherwise. Signed-off-by: Martin Petermann <martin.petermann@de.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Wait for port scan to complete when setting adapter onlineChristof Schmitt2008-11-051-1/+3
| | | | | | | | | | | | Attaching a unit immediately after setting the adapter online should be possible. The problem right now is that the port_scan runs from a workqueue and has not finished when the set_online call returns and the sysfs structures for the ports are not available yet. Fix that by waiting for the port scan to complete. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Fix cast warningChristof Schmitt2008-11-051-1/+2
| | | | | | | | | | | Fix leftover from last typecast patch: drivers/s390/scsi/zfcp_aux.c: In function ‘zfcp_port_enqueue’: drivers/s390/scsi/zfcp_aux.c:629: warning: format ‘%016llx’ expects type ‘long long unsigned int’, but argument 3 has type ‘u64’ Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Fix request list handling in error pathChristof Schmitt2008-11-051-11/+6
| | | | | | | | | | | | | Fix the handling of the request list in the error path: - Use irqsave for the lock as in the good path. - Before removing the request, check if it is still in the list, a call to dismiss_all might have changed the list in between. - zfcp_qdio_send does not change the queue counters on failure, trying revert something is wrong, so remove this. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: fix mempool usage for status_read requestsChristof Schmitt2008-11-051-0/+1
| | | | | | | | | | When allocating fsf requests without qtcb, store the pointer to the mempool in the fsf requests for later call to mempool_free. This codepath is only used by the status_read requests. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: fix req_list_locking.Heiko Carstens2008-11-051-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The per adapter req_list_lock must be held with interrupts disabled, otherwise we might end up with nice deadlocks as lockdep tells us (see below). zfcp 0.0.1804: QDIO problem occurred. ========================================================= [ INFO: possible irq lock inversion dependency detected ] 2.6.27-rc8-00035-g4a77035-dirty #86 --------------------------------------------------------- swapper/0 just changed the state of lock: (&adapter->erp_lock){++..}, at: [<00000000002c82ae>] zfcp_erp_adapter_reopen+0x4e/0x8c but this lock took another, hard-irq-unsafe lock in the past: (&adapter->req_list_lock){-+..} and interrupts could create inverse lock ordering between them. [tons of backtraces, but only the interesting part follows] the second lock's dependencies: -> (&adapter->req_list_lock){-+..} ops: 2280627634176 { initial-use at: [<0000000000071f10>] __lock_acquire+0x504/0x18bc [<000000000007335c>] lock_acquire+0x94/0xbc [<00000000003d7224>] _spin_lock_irqsave+0x6c/0xb0 [<00000000002cf684>] zfcp_fsf_req_dismiss_all+0x50/0x140 [<00000000002c87ee>] zfcp_erp_adapter_strategy_generic+0x66/0x3d0 [<00000000002c9498>] zfcp_erp_thread+0x88c/0x1318 [<000000000001b0d2>] kernel_thread_starter+0x6/0xc [<000000000001b0cc>] kernel_thread_starter+0x0/0xc in-softirq-W at: [<0000000000072172>] __lock_acquire+0x766/0x18bc [<000000000007335c>] lock_acquire+0x94/0xbc [<00000000003d7224>] _spin_lock_irqsave+0x6c/0xb0 [<00000000002ca73e>] zfcp_qdio_int_resp+0xbe/0x2ac [<000000000027a1d6>] qdio_kick_inbound_handler+0x82/0xa0 [<000000000027daba>] tiqdio_inbound_processing+0x62/0xf8 [<0000000000047ba4>] tasklet_action+0x100/0x1f4 [<0000000000048b5a>] __do_softirq+0xae/0x154 [<0000000000021e4a>] do_softirq+0xea/0xf0 [<00000000000485de>] irq_exit+0xde/0xe8 [<0000000000268c64>] do_IRQ+0x160/0x1fc [<00000000000261a2>] io_return+0x0/0x8 [<000000000001b8f8>] cpu_idle+0x17c/0x224 hardirq-on-W at: [<0000000000072190>] __lock_acquire+0x784/0x18bc [<000000000007335c>] lock_acquire+0x94/0xbc [<00000000003d702c>] _spin_lock+0x5c/0x9c [<00000000002caff6>] zfcp_fsf_req_send+0x3e/0x158 [<00000000002ce7fe>] zfcp_fsf_exchange_config_data+0x106/0x124 [<00000000002c8948>] zfcp_erp_adapter_strategy_generic+0x1c0/0x3d0 [<00000000002c98ea>] zfcp_erp_thread+0xcde/0x1318 [<000000000001b0d2>] kernel_thread_starter+0x6/0xc [<000000000001b0cc>] kernel_thread_starter+0x0/0xc } ... key at: [<0000000000e356c8>] __key.26629+0x0/0x8 Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christof Schmitt <christof.schmit@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Dont clear reference from SCSI device to unitChristof Schmitt2008-11-051-8/+4
| | | | | | | | | | | | It is possible that a remote port has a problem, the SCSI device gets deleted after the rport timeout and then the timeout for pending SCSI commands trigger an abort. For this case, don't delete the reference from the SCSI device to the zfcp unit, so that we can still have the reference to issue an abort request. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* blktrace: pass zfcp driver dataStefan Raspl2008-10-174-0/+49
| | | | | | | | | | | This patch writes the channel and fabric latencies in nanoseconds per request via blktrace for later analysis. The utilization of the inbound and outbound adapter queue is also reported. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Martin Peschke <mp3@de.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* [S390] more bus_id -> dev_name conversionsCornelia Huck2008-10-103-3/+3
| | | | | | | | | Some further bus_id -> dev_name() conversions in s390 code. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] bus_id -> dev_set_name() changesCornelia Huck2008-10-101-4/+3
| | | | | | | | | | Convert most s390 users setting bus_id to dev_set_name(). css and ccw busses are deferred since they need some special treatment. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] bus_id -> dev_name conversionsKay Sievers2008-10-101-1/+1
| | | | | | | | | | bus_id -> dev_name() conversions in s390 code. [cornelia.huck@de.ibm.com: minor adaptions] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [SCSI] zfcp: fix double dbf id usageSwen Schillig2008-10-033-3/+3
| | | | | | | | | Trace ids 107 and 3 are used twice, fix this to have unique ids for the erp triggers. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: wait on SCSI work to be finished before proceeding with init devSwen Schillig2008-10-032-0/+6
| | | | | | | | | | | Due to the character of a scheduled work we cannot guarantee the LUN register to be finished before an initial device tries to use it. Therefor we have to wait for PENDING_SCSI_WORK flag to be cleared before proceeding. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: fix erp list usage without using locksSwen Schillig2008-10-031-2/+2
| | | | | | | | | | | The zfcp_erp_thread was using the nolock version of the dbf function. This resulted in a list access while other tasks could modifying the list. The symptom was an erp thread running at 100% CPU and never returning from the dbf function. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: prevent fc_remote_port_delete calls for unregistered rportSwen Schillig2008-10-031-0/+2
| | | | | | | | | | In case of an adapter reopen all rports have to be deleted from the environment. This should only happen for already registered rports otherwise fc_remote_port_delete is called with a NULL pointer. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: fix deadlock caused by shared work queue tasksSwen Schillig2008-10-034-3/+6
| | | | | | | | | | | | | | | | Each adapter reopen trigger automatically a scan_port task which is waiting for the ERP to be finished before further processing. Since the initial device setup enqueues adapter, port and LUN which are individual ERP actions, this process would start after everything is done. Unfortunately the port_reopen requires another scheduled work to be finished which is queued after the automatic scan_port -> deadlock ! This fix creates an own work queue for ERP based nameserver requests. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: put threshold data in hba traceSwen Schillig2008-10-034-0/+50
| | | | | | | | | | | Now that we removed the long messages for the bit error threshold data, put the data in the hba trace. This way, we get a short warning for the threshold event from the hardware and have the data in the trace for further analysis. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Simplify zfcp data structuresChristof Schmitt2008-10-039-113/+77
| | | | | | | | | | | | | | Reduce the size of zfcp data structures by removing unused and redundant members. scsi_lun is only the mangled version of the fcp_lun. So, remove the redundant field and use the fcp_lun instead. Since the queue lock and the pci_batch indicator are only used in the request queue, move them from the common queue struct to the adapter struct. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Simplify get_adapter_by_busidSwen Schillig2008-10-033-13/+18
| | | | | | | | | Call the helper function from cio instead looping through all zfcp adapters. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: remove all typedefs and replace them with standardsSwen Schillig2008-10-038-84/+88
| | | | | | | | Remove typedefs from zfcp, use already existing types instead. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: attach and release SAN nameserver port on demandSwen Schillig2008-10-038-275/+362
| | | | | | | | | | | | | | | | | Changing the zfcp behaviour from always having the nameserver port open to an on-demand strategy. This strategy reduces the use of limited resources like port connections. The patch provides a common infrastructure which could be used for all WKA ports in future. Also reduce the number of nameserver lookups by changing the zfcp behaviour of always querying the nameserver for the corresponding destination ID of the remote port. If the destination ID has changed during the reopen process we will be informed and then trigger a nameserver query on demand. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: remove unused references, declarations and flagsSwen Schillig2008-10-0311-249/+60
| | | | | | | | | | | | | | | | | | | - Remove unused references and declarations, including one instance of the FC ls_adisc struct that has been defined twice. - Also remove the flags COMMON_OPENING, COMMON_CLOSING, ADAPTER_REGISTERED and XPORT_OK that are only set and cleared, but not checked anywhere. - Remove the zfcp specific atomic_test_mask makro. Simply use atomic_read directly instead. - Remove the zfcp internal sg helper functions and switch the places where it is still used to call sg_virt directly. - With the update of the QDIO code, the QDIO data structures no longer use the volatile type qualifier. Now we can also remove the volatile qualifiers from the zfcp code. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Update message with input from reviewChristof Schmitt2008-10-037-207/+127
| | | | | | | | | Update the kernel messages in zfcp with input from the message review and remove some messages that have been identified as redundant. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: add queue_full sysfs attributeStefan Raspl2008-10-034-7/+32
| | | | | | | | | | | Adds a new sysfs attribute queue_full for adapters that records the number of incidents where a requests could not be submitted due to insufficient free space on the request queue. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Martin Peschke <mp3@de.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Remove duplicated unlikely() macros.Hirofumi Nakagawa2008-08-291-16/+16
| | | | | | | | | | Some drivers have duplicated unlikely() macros. IS_ERR() already has unlikely() in itself. This patch cleans up such pointless codes although there is no real effect on the kernel's behaviour. Signed-off-by: Hirofumi Nakagawa <hnakagawa@miraclelinux.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: channel cannot be detached due to refcount imbalanceSwen Schillig2008-08-291-1/+0
| | | | | | | | | Due to an imbalance of the nameserver refcounting, channel devices couldn't be take offline anymore after the channel was activated. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Fix reference counter for remote portsSwen Schillig2008-08-291-16/+9
| | | | | | | | | | Fix the remote port reference counter handling during ELS ADISC commands and find the remote port by WWPN not by D_IDs that could change. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Simplify ccw notify handlerChristof Schmitt2008-08-291-5/+1
| | | | | | | | | | | | The notify handler does not change the list of adapters, it only triggers erp actions to open or shutdown the adapter. We don't need to hold the config semaphore and wait for the erp to complete. This is a prerequisite for a fix in the s390 common i/o code. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Martin Petermann <martin@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
OpenPOWER on IntegriCloud