summaryrefslogtreecommitdiffstats
path: root/drivers/regulator/wm831x-dcdc.c
Commit message (Collapse)AuthorAgeFilesLines
* regulator: wm831x: Pass the IRQF_ONESHOT flagFabio Estevam2015-06-021-4/+8
| | | | | | | | | | | | | | Since commit 1c6c69525b40 ("genirq: Reject bogus threaded irq requests") threaded IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise the request will fail. So pass the IRQF_ONESHOT flag in this case. The semantic patch that makes this change is available in scripts/coccinelle/misc/irqf_oneshot.cocci. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* regulator: drop owner assignment from platform_driversWolfram Sang2014-10-201-4/+0
| | | | | | | A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* regulator: wm831x-dcdc: Remove redundant error messageSachin Kamat2014-02-201-12/+4
| | | | | | | kzalloc prints its own OOM message upon failure. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
* regulator: wm831x-dcdc: Remove unneeded 'err' labelFabio Estevam2013-12-311-7/+3
| | | | | | | | | There is no need to jump to the 'err' label. Returnn the error directly instead. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
* regulator: wm831x-dcdc: Convert to devm_regulator_register()Mark Brown2013-09-171-54/+12
| | | | Signed-off-by: Mark Brown <broonie@linaro.org>
* regulator: wm831x-dcdc: Convert to devm_request_threaded_irq()Mark Brown2013-09-171-22/+14
| | | | | | | devm guarantees that resources are freed in the opposite order to that in which they are registered. Signed-off-by: Mark Brown <broonie@linaro.org>
* regulator: wm831x-dcdc: Convert to devm_gpio_request_one()Mark Brown2013-09-171-10/+8
| | | | | | Saves code in the unwind path. Signed-off-by: Mark Brown <broonie@linaro.org>
* regulator: use dev_get_platdata()Jingoo Han2013-07-301-4/+4
| | | | | | | | Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
* regulator: Remove all platform_set_drvdata(pdev, NULL) in driversAxel Lin2013-05-121-7/+0
| | | | | | | | | Since 0998d06310 "device-core: Ensure drvdata = NULL when no driver is bound", this is done by driver core after device_release or on probe failure. Thus we can remove all platform_set_drvdata(pdev, NULL) in drivers. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* Merge remote-tracking branch 'regulator/topic/wm831x' into regulator-nextMark Brown2012-12-101-1/+2
|\
| * regulator: wm831x-dcdc: Add MODULE_ALIAS for wm831x-boostpAxel Lin2012-12-031-0/+1
| | | | | | | | | | Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * regulator: wm831x-dcdc: Ensure selected voltage falls within requested rangeAxel Lin2012-12-031-1/+1
| | | | | | | | | | | | | | | | Use DIV_ROUND_UP to ensure selected voltage won't less than min_uV due to integer truncation. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | Merge remote-tracking branch 'regulator/topic/hotplug' into regulator-nextMark Brown2012-12-101-13/+13
|\ \
| * | regulator: remove use of __devexitBill Pemberton2012-11-201-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * | regulator: remove use of __devinitBill Pemberton2012-11-201-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * | regulator: remove use of __devexit_pBill Pemberton2012-11-201-4/+4
| |/ | | | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | regulator: wm831x: Set the new rather than old value for DVS VSELMark Brown2012-11-201-1/+1
|/ | | | | | Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
* Merge tag 'mfd-3.7-1' of ↵Linus Torvalds2012-10-051-6/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD changes from Samuel Ortiz: "MFD bits for the 3.7 merge window. As usual we have a few new drivers: - TI LP8788 - TI OMAP USB TLL - Maxim MAX8907 - SMSC ECE1099 - Dialog Semiconductor DA9055 - A simpler syscon driver that allow us to get rid of the anatop one. Drivers are also gradually getting Device Tree and IRQ domain support. The following drivers got DT support: - palmas, 88pm860x, tc3589x and twl4030-audio And those ones now use the IRQ domain APIs: - 88pm860x, tc3589x, db8500_prcmu Also some other interesting changes: - Intel's ICH LPC now supports Lynx Point - TI's twl4030-audio added a GPO child - tps6527 enabled its backlight subdevice - The twl6030 pwm driver moved to the new PWM subsystem And finally a bunch of cleanup and casual fixes for mc13xxx, 88pm860x, palmas, ab8500, wm8994, wm5110, max8907 and the tps65xxx family." Fix up various annoying conflicts: the DT and IRQ domain support came in twice and was already in 3.6. And then it was apparently rebased. Guys, DON'T REBASE! * tag 'mfd-3.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (89 commits) ARM: dts: Enable 88pm860x pmic mfd: 88pm860x: Move gpadc init into touch mfd: 88pm860x: Device tree support mfd: 88pm860x: Use irqdomain mfd: smsc: Add support for smsc gpio io/keypad driver backlight: tps65217_bl: Add missing platform_set_drvdata in tps65217_bl_probe mfd: DA9055 core driver mfd: tps65910: Add alarm interrupt of TPS65910 RTC to mfd device list mfd: wm5110: Add register patches for revision B mfd: wm5110: Disable control interface error report for WM5110 rev B mfd: max8907: Remove regulator-compatible from DT docs backlight: Add TPS65217 WLED driver mfd: Add backlight as subdevice to the tps65217 mfd: Provide the PRCMU with its own IRQ domain mfd: Fix max8907 sparse warning mfd: Add lp8788 mfd driver mfd: dbx500: Provide a more accurate smp_twd clock mfd: rc5t583: Fix warning messages regulator: palmas: Add DT support mfd: palmas: Change regulator defns to better suite DT ...
| * mfd: wm831x: Convert to IORESOURCE_REGMark Brown2012-09-111-6/+6
| | | | | | | | | | | | | | | | | | | | | | This was originally written by Russell King who unfortunately found himself unable to take the patch futher. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Tested-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | regulator: wm831x-dcdc: set_current_limit should select the maximum current ↵Axel Lin2012-08-281-6/+5
|/ | | | | | | in specific range Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* regulator: wm831x-dcdc: Convert wm831x_buckv_ops to set_voltage_sel and ↵Axel Lin2012-06-171-13/+8
| | | | | | | map_voltage Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* regulator: wm831x-dcdc: Convert wm831x_buckp_ops to ↵Axel Lin2012-06-171-35/+9
| | | | | | | regulator_set_voltage_sel_regmap Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* regulator: wm831x-dcdc: Convert wm831x_buckp_ops to ↵Axel Lin2012-06-171-11/+4
| | | | | | | regulator_list_voltage_linear Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* Merge tag 'mfd-3.5-1' of ↵Linus Torvalds2012-05-291-9/+15
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD changes from Samuel Ortiz: "Besides the usual cleanups, this one brings: * Support for 5 new chipsets: Intel's ICH LPC and SCH Centerton, ST-E's STAX211, Samsung's MAX77693 and TI's LM3533. * Device tree support for the twl6040, tps65910, da9502 and ab8500 drivers. * Fairly big tps56910, ab8500 and db8500 updates. * i2c support for mc13xxx. * Our regular update for the wm8xxx driver from Mark." Fix up various conflicts with other trees, largely due to ab5500 removal etc. * tag 'mfd-3.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (106 commits) mfd: Fix build break of max77693 by adding REGMAP_I2C option mfd: Fix twl6040 build failure mfd: Fix max77693 build failure mfd: ab8500-core should depend on MFD_DB8500_PRCMU gpio: tps65910: dt: process gpio specific device node info mfd: Remove the parsing of dt info for tps65910 gpio mfd: Save device node parsed platform data for tps65910 sub devices mfd: Add r_select to lm3533 platform data gpio: Add Intel Centerton support to gpio-sch mfd: Emulate active low IRQs as well as active high IRQs for wm831x mfd: Mark two lm3533 zone registers as volatile mfd: Fix return type of lm533 attribute is_visible mfd: Enable Device Tree support in the ab8500-pwm driver mfd: Enable Device Tree support in the ab8500-sysctrl driver mfd: Add support for Device Tree to twl6040 mfd: Register the twl6040 child for the ASoC codec unconditionally mfd: Allocate twl6040 IRQ numbers dynamically mfd: twl6040 code cleanup in interrupt initialization part mfd: Enable ab8500-gpadc driver for Device Tree mfd: Prevent unassigned pointer from being used in ab8500-gpadc driver ...
| * mfd: Convert wm831x to irq_domainMark Brown2012-05-201-9/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The modern idiom is to use irq_domain to allocate interrupts. This is useful partly to allow further infrastructure to be based on the domains and partly because it makes it much easier to allocate virtual interrupts to devices as we don't need to allocate a contiguous range of interrupt numbers. Convert the wm831x driver over to this infrastructure, using a legacy IRQ mapping if an irq_base is specified in platform data and otherwise using a linear mapping, always registering the interrupts even if they won't ever be used. Only boards which need to use the GPIOs as interrupts should need to use an irq_base. This means that we can't use the MFD irq_base management since the unless we're using an explicit irq_base from platform data we can't rely on a linear mapping of interrupts. Instead we need to map things via the irq_domain - provide a conveniencem function wm831x_irq() to save a small amount of typing when doing so. Looking at this I couldn't clearly see anything the MFD core could do to make this nicer. Since we're not supporting device tree yet there's no meaningful advantage if we don't do this conversion in one, the fact that the interrupt resources are used for repeated IP blocks makes accessor functions for the irq_domain more trouble to do than they're worth. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | regulator: wm831x-dcdc: Add missing checks for pdata before useMark Brown2012-05-141-2/+3
| | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | Merge remote-tracking branch 'regulator/topic/drivers' into regulator-nextMark Brown2012-05-121-11/+16
|\ \ | | | | | | | | | | | | Conflicts: drivers/regulator/88pm8607.c (simple overlap with a bugfix in v3.4)
| * | regulator: wm831x-dcdc: Convert to gpio_request_one()Mark Brown2012-05-071-10/+4
| | | | | | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * | regulator: wm831x-dcdc: Specify supply namesMark Brown2012-04-231-1/+12
| | | | | | | | | | | | | | | | | | Allows hookup via normal consumer mechanisms. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | regulator: wm831x: Register all normal regulatorsMark Brown2012-05-101-12/+6
| | | | | | | | | | | | | | | | | | | | | | | | Register all normal regulators rather than skipping unconfigured ones now that the core can handle regulators without init data. Skip the boost and isink regulators since they are normally controlled by other drivers. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | regulator: wm831x-dcdc: Use generic regmap enable/disable operationsMark Brown2012-04-161-47/+23
| | | | | | | | | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
* | | regulator: wm831x-dcdc: Use regulator_get_voltage_sel_regmap()Mark Brown2012-04-161-15/+4
|/ / | | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
* | Merge tag 'v3.4-rc2' into regulator-driversMark Brown2012-04-101-3/+6
|\ \ | |/ | | | | Linux 3.4-rc2 contains some fixes that further patches depend upon.
| * regulator: wm831x-dcdc: Fix the logic to choose best current limit settingAxel Lin2012-03-281-1/+2
| | | | | | | | | | | | | | | | | | | | | | Current code in wm831x_buckv_set_current_limit actually set the current limit setting greater than specified range. Fix the logic in wm831x_buckv_set_current_limit to choose the smallest current limit setting falls within the specified range. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * regulator: Fix set and get current limit for wm831x_buckvAxel Lin2012-03-261-2/+4
| | | | | | | | | | | | | | | | WM831X_DC1_HC_THR_MASK is 0x0070. We need to do proper shift for setting and getting current limit. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | regulator: core: Use a struct to pass in regulator runtime configurationMark Brown2012-04-091-8/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Rather than adding new arguments to regulator_register() every time we want to add a new bit of dynamic information at runtime change the function to take these via a struct. By doing this we avoid needing to do further changes like the recent addition of device tree support which required each regulator driver to be updated to take an additional parameter. The regulator_desc which should (mostly) be static data is still passed separately as most drivers are able to configure this statically at build time. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | regulator: wm831x-dcdc: Use devm_kzallocAxel Lin2012-04-011-7/+2
|/ | | | | Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* regulator: Convert wm831x regulator drivers to devm_kzalloc()Mark Brown2011-12-201-6/+4
| | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* regulator: pass additional of_node to regulator_register()Rajendra Nayak2011-11-231-4/+4
| | | | | | | | | | | With device tree support for regulators, its needed that the regulator_dev->dev device has the right of_node attached. To be able to do this add an additional parameter to the regulator_register() api, wherein the dt-adapted driver can then pass this additional info onto the regulator core. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* regulator: Improve WM831x DVS VSEL selection algorithmMark Brown2011-07-281-37/+15
| | | | | | | | | | Rather than using the maximum voltage we get passed to select the DVS voltage to use remember the highest voltage we've ever seen. This improves how the driver works when the consumer permits higher voltages than it will ever selects in order to support the widest possible voltage range. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* regulator: Bootstrap wm831x DVS VSEL value from ON VSEL if not already setMark Brown2011-07-281-0/+14
| | | | | | | | If we don't have a DVS VSEL value already set when we start up then start it off with the value currently being used for ON. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* regulator: Set up GPIO for WM831x VSEL before enabling VSEL modeMark Brown2011-07-281-21/+20
| | | | | | | | | If the VSEL is not in use prior to us starting up then we need to make sure we initialise the GPIO before we push the DVS control to being done by the GPIO. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* regulator: Add EPEs to the MODULE_ALIAS() for wm831x-dcdcMark Brown2011-07-281-0/+1
| | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* regulator: Fix WM831x DCDC DVS VSEL bootstrappingMark Brown2011-07-281-1/+1
| | | | | | | Read our initial VSEL from the correct register. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* regulator: Fix WM831x regulator ID lookups for multiple WM831xsMark Brown2011-07-281-2/+14
| | | | | | | | | With multiple wm831x devices the device IDs used for the regulators will not always be contiguous so simply taking the modulus is not sufficient to look up the ID, we need to reverse the way the ID is generated. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* regulator: Remove some unused variables from wm831x DCDCsMark Brown2011-05-271-2/+0
| | | | | | | | | These became unused with the IRQ removal patch, I'm fairly sure that a patch was sent earlier by someone else but it doesn't seem to have been applied and I don't have a copy sitting around any more. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* regulator: Remove more wm831x-specific IRQ operationsMark Brown2011-03-261-3/+3
| | | | | | | These are the last users in the tree. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* regulator: Convert WM831x regulators to genirqMark Brown2011-03-261-15/+11
| | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* regulator: Fix warning with CONFIG_BUG disabledMark Brown2011-02-251-0/+1
| | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* regulator: Convert WM831x drivers to use get_voltage_sel()Mark Brown2011-01-121-7/+7
| | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
OpenPOWER on IntegriCloud