summaryrefslogtreecommitdiffstats
path: root/drivers/net
Commit message (Collapse)AuthorAgeFilesLines
* Merge branch 'r8169-davem' of ↵David S. Miller2011-02-231-19/+23
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6
| * r8169: fix RTL8168DP power off issue.Hayes Wang2011-02-231-3/+14
| | | | | | | | | | | | | | | | - fix the RTL8111DP turn off the power when DASH is enabled. - RTL_GIGA_MAC_VER_27 must wait for tx finish before reset. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com>
| * r8169: correct settings of rtl8102e.Hayes Wang2011-02-231-14/+6
| | | | | | | | | | | | | | Adjust and remove certain settings of RTL8102E which are for previous chips. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-off-by: Francois Romieu <romieu@fr.zoreil.com>
| * r8169: fix incorrect args to oob notify.Hayes Wang2011-02-231-2/+3
| | | | | | | | | | | | | | It results in the wrong point address and influences RTL8168DP. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com>
* | Added support for usb ethernet (0x0fe6, 0x9700)Shahar Havivi2011-02-231-0/+4
| | | | | | | | | | | | | | | | | | The device is very similar to (0x0fe6, 0x8101), And works well with dm9601 driver. Signed-off-by: Shahar Havivi <shaharh@redhat.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
* | DM9000B: Fix PHY power for network down/upHenry Nestler2011-02-231-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | DM9000 revision B needs 1 ms delay after PHY power-on. PHY must be powered on by writing 0 into register DM9000_GPR before all other settings will change (see Davicom spec and example code). Remember, that register DM9000_GPR was not changed by reset sequence. Without this fix the FIFO is out of sync and sends wrong data after sequence of "ifconfig ethX down ; ifconfig ethX up". Signed-off-by: David S. Miller <davem@davemloft.net>
* | DM9000B: Fix reg_save after spin_lock in dm9000_timeoutHenry Nestler2011-02-231-1/+1
|/ | | | | | The spin_lock should hold before reading register. Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2011-02-227-82/+111
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
| * p54pci: update receive dma buffers before and after processingChristian Lamparter2011-02-211-5/+9
| | | | | | | | | | | | | | | | | | | | | | | | Documentation/DMA-API-HOWTO.txt states: "DMA transfers need to be synced properly in order for the cpu and device to see the most uptodate and correct copy of the DMA buffer." Cc: <stable@kernel.org> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rt2x00: Fix WPA TKIP Michael MIC failures.Gertjan van Wingerde2011-02-212-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | As reported and found by Johannes Stezenbach: rt2800{pci,usb} do not report the Michael MIC in RXed frames, but do check the Michael MIC in hardware. Therefore we have to report to mac80211 that the received frame does not include the Michael MIC. https://bugzilla.kernel.org/show_bug.cgi?id=16608 Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath5k: Fix fast channel switchingNick Kossifidis2011-02-211-55/+87
| | | | | | | | | | | | | | | | | | | | | | | | | | Fast channel change fixes: a) Always set OFDM timings b) Don't re-activate PHY c) Enable only NF calibration, not AGC https://bugzilla.kernel.org/show_bug.cgi?id=27382 Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath5k: Correct channel setting for AR2317 chipNikolay Ledovskikh2011-02-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Correct channel setting function must be used for AR2317. When I tested ahb patch on bullet2 all seemed to work fine, but it couldn't connect another host (using ibss for example). During an analysis I observed that it's transmitting on another channel. I looked into madwifi code and understood that the problem is in channel setting function. So atheros RF2317 not fully handled in the current ath5k version and must be patched. Signed-off-by: Nikolay Ledovskikh <nledovskikh@gmail.com> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wireless: rt2x00: rt2800pci.c: add two idsXose Vazquez Perez2011-02-181-0/+2
| | | | | | | | | | | | | | | | taken two RT35XX EDIMAX from DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217 Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: Fix ath9k prevents CPU to enter C3 statesMohammed Shafi Shajakhan2011-02-153-22/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DMA latency issue is observed only in Intel pinetrail platforms but in the driver we had a default PM-QOS value of 55. This caused unnecessary power consumption and battery drain in other platforms. Remove the pm-qos thing in the driver code and address the throughput issue in Intel pinetrail platfroms in user space using any one of the scripts in below links: http://www.kernel.org/pub/linux/kernel/people/mcgrof/scripts/cpudmalatency.c http://johannes.sipsolutions.net/files/netlatency.c.txt More details can be found in the following bugzilla link: https://bugzilla.kernel.org/show_bug.cgi?id=27532 This reverts the following commits: 98c316e348bedffa730e6f1e4baeb8a3c3e0f28b 4dc3530df7c0428b41c00399a7ee8c929406d181 10598c124ecabbbfd7522f74de19b8f7d52a1bee Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | sfc: lower stack usage in efx_ethtool_self_testEric Dumazet2011-02-221-9/+13
| | | | | | | | | | | | | | | | | | | | drivers/net/sfc/ethtool.c: In function ‘efx_ethtool_self_test’: drivers/net/sfc/ethtool.c:613: warning: the frame size of 1200 bytes is larger than 1024 bytes Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2011-02-1816-155/+245
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits) net: deinit automatic LIST_HEAD net: dont leave active on stack LIST_HEAD net: provide default_advmss() methods to blackhole dst_ops tg3: Restrict phy ioctl access drivers/net: Call netif_carrier_off at the end of the probe ixgbe: work around for DDP last buffer size ixgbe: fix panic due to uninitialised pointer e1000e: flush all writebacks before unload e1000e: check down flag in tasks isdn: hisax: Use l2headersize() instead of dup (and buggy) func. arp_notify: unconditionally send gratuitous ARP for NETDEV_NOTIFY_PEERS. cxgb4vf: Use defined Mailbox Timeout cxgb4vf: Quiesce Virtual Interfaces on shutdown ... cxgb4vf: Behave properly when CONFIG_DEBUG_FS isn't defined ... cxgb4vf: Check driver parameters in the right place ... pch_gbe: Fix the MAC Address load issue. iwlwifi: Delete iwl3945_good_plcp_health. net/can/softing: make CAN_SOFTING_CS depend on CAN_SOFTING netfilter: nf_iterate: fix incorrect RCU usage pch_gbe: Fix the issue that the receiving data is not normal. ...
| * | tg3: Restrict phy ioctl accessMatt Carlson2011-02-171-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If management firmware is present and the device is down, the firmware will assume control of the phy. If a phy access were allowed from the host, it will collide with firmware phy accesses, resulting in unpredictable behavior. This patch fixes the problem by disallowing phy accesses during the problematic condition. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | drivers/net: Call netif_carrier_off at the end of the probeIvan Vecera2011-02-172-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without calling of netif_carrier_off at the end of the probe the operstate is unknown when the device is initially opened. By default the carrier is on so when the device is opened and netif_carrier_on is called the link watch event is not fired and operstate remains zero (unknown). This patch fixes this behavior in forcedeth and r8169. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ixgbe: work around for DDP last buffer sizeAmir Hanania2011-02-172-1/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A HW limitation was recently discovered where the last buffer in a DDP offload cannot be a full buffer size in length. Fix the issue with a work around by adding another buffer with size = 1. Signed-off-by: Amir Hanania <amir.hanania@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | ixgbe: fix panic due to uninitialised pointerAndy Gospodarek2011-02-171-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Systems containing an 82599EB and running a backported driver from upstream were panicing on boot. It turns out hw->mac.ops.setup_sfp is only set for 82599, so one should check to be sure that pointer is set before continuing in ixgbe_sfp_config_module_task. I verified by inspection that the upstream driver has the same issue and also added a check before the call in ixgbe_sfp_link_config. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | e1000e: flush all writebacks before unloadJesse Brandeburg2011-02-171-10/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver was not flushing all writebacks before unloading, possibly causing memory to be written by the hardware after the driver had reinitialized the rings. This adds missing functionality to flush any pending writebacks and is called in all spots where descriptors should be completed before the driver begins processing. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | e1000e: check down flag in tasksJesse Brandeburg2011-02-171-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | This change is part of a fix to avoid any tasks running while the driver is exiting and deinitializing resources. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | cxgb4vf: Use defined Mailbox TimeoutCasey Leedom2011-02-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | VF Driver should use mailbox command timeout specified in t4fw_interface.h rather than hard-coded value of 500ms. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | cxgb4vf: Quiesce Virtual Interfaces on shutdown ...Casey Leedom2011-02-141-0/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a Virtual Machine is rebooted, KVM currently fails to issue a Function Level Reset against any "Attached PCI Devices" (AKA "PCI Passthrough"). In addition to leaving the attached device in a random state in the next booted kernel (which sort of violates the entire idea of a reboot reseting hardware state), this leaves our peer thinking that the link is still up. (Note that a bug has been filed with the KVM folks, #25332, but there's been no response on that as of yet.) So, we add a "->shutdown()" method for the Virtual Function PCI Device to handle administrative shutdowns like a reboot. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | cxgb4vf: Behave properly when CONFIG_DEBUG_FS isn't defined ...Casey Leedom2011-02-141-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | When CONFIG_DEBUG_FS we get "ERR_PTR()"s back from the debugfs routines instead of NULL. Use the right predicates to check for this. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | cxgb4vf: Check driver parameters in the right place ...Casey Leedom2011-02-141-12/+11
| | | | | | | | | | | | | | | | | | | | | | | | Check module parameter validity in the module initialization routine instead of the PCI Device Probe routine. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | pch_gbe: Fix the MAC Address load issue.Toshiharu Okada2011-02-142-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the specification of hardware, the processing at the time of driver starting was modified. This device write automatically the MAC address read from serial ROM into a MAC Adress1A/1B register at the time of power on reset. However, when stable clock is not supplied, the writing of MAC Adress1A/1B register may not be completed. In this case, it is necessary to load MAC address to MAC Address1A/1B register by the MAC Address1 load register. This patch always does the above processing, in order not to be dependent on system environment. Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | iwlwifi: Delete iwl3945_good_plcp_health.David S. Miller2011-02-141-66/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes this build warning: drivers/net/wireless/iwlwifi/iwl-3945.c:411:13: warning: 'iwl3945_good_plcp_health' defined but not used As per Johannes Berg. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Merge branch 'master' of ↵David S. Miller2011-02-141-1/+0
| |\ \ | | |/ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
| | * iwl3945: remove plcp checkStanislaw Gruszka2011-02-091-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch fixes: https://bugzilla.redhat.com/show_bug.cgi?id=654599 Many users report very low speed problem on 3945 devices, this patch fixes problem, but only for some of them. For unknown reason, sometimes after hw scanning, device is not able to receive frames at high rate. Since plcp health check may request hw scan to "reset radio", performance problem start to be observable after update kernel to .35, where plcp check was introduced. Bug reporter confirmed that removing plcp check fixed problem for him. Reported-and-tested-by: SilvioTO <silviotoya@yahoo.it> Cc: stable@kernel.org # 2.6.35+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | net/can/softing: make CAN_SOFTING_CS depend on CAN_SOFTINGKurt Van Dijck2011-02-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The statement 'select CAN_SOFTING' may ignore the dependancies for CAN_SOFTING while selecting CAN_SOFTING_CS, as is therefore a bad choice. Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | pch_gbe: Fix the issue that the receiving data is not normal.Toshiharu Okada2011-02-131-42/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This PCH_GBE driver had an issue that the receiving data is not normal. This driver had not removed correctly the padding data which the DMA include in receiving data. This patch fixed this issue. Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | stmmac: enable wol via magic frame by default.Giuseppe Cavallaro2011-02-131-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables it by default when the driver starts. This has been required by many people and seems to actually be useful on STB. At any rate, the WoL modes can be selected and turned-on/off by using the ethtool at run-time by users. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Net, USB, Option, hso: Do not dereference NULL pointerJesper Juhl2011-02-131-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In drivers/net/usb/hso.c::hso_create_bulk_serial_device() we have this code: ... serial = kzalloc(sizeof(*serial), GFP_KERNEL); if (!serial) goto exit; ... exit: hso_free_tiomget(serial); ... hso_free_tiomget() directly dereferences its argument, which in the example above is a NULL pointer, ouch. I could just add a 'if (serial)' test at the 'exit' label, but since most freeing functions in the kernel accept NULL pointers (and it seems like this was also assumed here) I opted to instead change 'hso_free_tiomget()' so that it is safe to call it with a NULL argument. I also modified the function to get rid of a pointles conditional before the call to 'usb_free_urb()' since that function already tests for NULL itself - besides fixing the NULL deref this change also buys us a few bytes in size. Before: $ size drivers/net/usb/hso.o text data bss dec hex filename 32200 592 9960 42752 a700 drivers/net/usb/hso.o After: $ size drivers/net/usb/hso.o text data bss dec hex filename 32196 592 9960 42748 a6fc drivers/net/usb/hso.o Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | USB Network driver infrastructure: Fix leak when usb_autopm_get_interface() ↵Jesper Juhl2011-02-131-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | returns less than zero in kevent(). We'll leak the memory allocated to 'urb' in drivers/net/usb/usbnet.c:kevent() when we 'goto fail_lowmem' and the 'urb' variable goes out of scope while still completely unused. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | Merge branch 'fixes-2.6.38' of ↵Linus Torvalds2011-02-181-1/+1
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq * 'fixes-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: make sure MAYDAY_INITIAL_TIMEOUT is at least 2 jiffies long workqueue, freezer: unify spelling of 'freeze' + 'able' to 'freezable' workqueue: wake up a worker when a rescuer is leaving a gcwq
| * | | workqueue, freezer: unify spelling of 'freeze' + 'able' to 'freezable'Tejun Heo2011-02-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are two spellings in use for 'freeze' + 'able' - 'freezable' and 'freezeable'. The former is the more prominent one. The latter is mostly used by workqueue and in a few other odd places. Unify the spelling to 'freezable'. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alex Dubov <oakad@yahoo.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Steven Whitehouse <swhiteho@redhat.com>
* | | | Merge branch 'for-linus' of ↵Linus Torvalds2011-02-151-1/+1
|\ \ \ \ | |/ / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: set flow handler for secondary interrupt controller of 5249 m68knommu: remove use of IRQ_FLG_LOCK from 68360 platform support m68knommu: fix dereference of port.tty m68knommu: add missing linker __modver section m68knommu: fix mis-named variable int set_irq_chip loop m68knommu: add optimize memmove() function m68k: remove arch specific non-optimized memcmp() m68knommu: fix use of un-defined _TIF_WORK_MASK m68knommu: Rename m548x_wdt.c to m54xx_wdt.c m68knommu: fix m548x_wdt.c compilation after headers renaming m68knommu: Remove dependencies on nonexistent M68KNOMMU
| * | | m68knommu: Remove dependencies on nonexistent M68KNOMMUGeert Uytterhoeven2011-02-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | M68KNOMMU is set nowhere. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2011-02-1023-129/+240
|\ \ \ \ | |/ / / |/| / / | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (34 commits) virtio_net: Add schedule check to napi_enable call x25: Do not reference freed memory. pch_can: fix tseg1/tseg2 setting issue isdn: hysdn: Kill (partially buggy) CVS regision log reporting. can: softing_cs needs slab.h pch_gbe: Fix the issue which a driver locks when rx offload is set by ethtool netfilter: nf_conntrack: set conntrack templates again if we return NF_REPEAT pch_can: fix module reload issue with MSI pch_can: fix rmmod issue pch_can: fix 800k comms issue net: Fix lockdep regression caused by initializing netdev queues too early. net/caif: Fix dangling list pointer in freed object on error. USB CDC NCM errata updates for cdc_ncm host driver CDC NCM errata updates for cdc.h ixgbe: update version string ixgbe: cleanup variable initialization ixgbe: limit VF access to network traffic ixgbe: fix for 82599 erratum on Header Splitting ixgbe: fix variable set but not used warnings by gcc 4.6 e1000: add support for Marvell Alaska M88E1118R PHY ...
| * | virtio_net: Add schedule check to napi_enable callBruce Rogers2011-02-101-11/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Under harsh testing conditions, including low memory, the guest would stop receiving packets. With this patch applied we no longer see any problems in the driver while performing these tests for extended periods of time. Make sure napi is scheduled subsequent to each napi_enable. Signed-off-by: Bruce Rogers <brogers@novell.com> Signed-off-by: Olaf Kirch <okir@suse.de> Cc: stable@kernel.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | pch_can: fix tseg1/tseg2 setting issueTomoya MORINAGA2011-02-091-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Previous patch "[PATCH 1/3] pch_can: fix 800k comms issue" is wrong. I should have modified tseg1_min not tseg2_min. This patch reverts tseg2_min to 1 and set tseg1_min to 2. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | can: softing_cs needs slab.hRandy Dunlap2011-02-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From: Randy Dunlap <randy.dunlap@oracle.com> softing_cs.c uses kzalloc & kfree, so it needs to include linux/slab.h. drivers/net/can/softing/softing_cs.c:234: error: implicit declaration of function 'kfree' drivers/net/can/softing/softing_cs.c:271: error: implicit declaration of function 'kzalloc' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | pch_gbe: Fix the issue which a driver locks when rx offload is set by ethtoolToshiharu Okada2011-02-091-8/+4
| | | | | | | | | | | | | | | | | | | | | | | | This driver will be in a deadlock, When the rx offload is set by ethtool. The pch_gbe_reinit_locked function was modified. Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | pch_can: fix module reload issue with MSITomoya2011-02-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, in case reload pch_can, pch_can not to be able to catch interrupt. The cause is bus-master is not set in pch_can. Thus, add enabling bus-master processing. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | pch_can: fix rmmod issueTomoya2011-02-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, when rmmod pch_can, kernel failure occurs. The cause is pci_iounmap executed before pch_can_reset. Thus pci_iounmap moves after pch_can_reset. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | pch_can: fix 800k comms issueTomoya2011-02-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, 800k comms fails since prop_seg set zero. (EG20T PCH CAN register of prop_seg must be set more than 1) To prevent prop_seg set to zero, change tseg2_min 1 to 2. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | USB CDC NCM errata updates for cdc_ncm host driverAlexey Orishko2011-02-081-80/+147
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specification links: - CDC NCM errata link: http://www.usb.org/developers/devclass_docs/NCM10_012011.zip - CDC and WMC errata link: http://www.usb.org/developers/devclass_docs/CDC1.2_WMC1.1_012011.zip Changes: - driver updated to match cdc.h header with errata changes - added support for USB_CDC_SET_NTB_INPUT_SIZE control request with 8 byte length - fixes to comply with specification: send only control requests supported by device, set number of datagrams for IN direction, connection speed structure update, etc. - packet loss fixed for tx direction; misleading flag renamed. - adjusted hard_mtu value. Signed-off-by: Alexey Orishko <alexey.orishko@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Merge branch 'master' of ↵David S. Miller2011-02-088-14/+21
| |\ \ | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-2.6
| | * | ixgbe: update version stringDon Skidmore2011-02-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This will synchronize the version string with that of the latest source forge driver which shares its functionality. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
OpenPOWER on IntegriCloud