summaryrefslogtreecommitdiffstats
path: root/drivers/net
Commit message (Collapse)AuthorAgeFilesLines
* igb: Explicitly select page 0 at initializationMatwey V Kornilov2017-07-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 440aeca4b9858248d8f16d724d9fa87a4f65fa33 upstream. The functions igb_read_phy_reg_gs40g/igb_write_phy_reg_gs40g (which were removed in 2a3cdea) explicitly selected the required page at every phy_reg access. Currently, igb_get_phy_id_82575 relays on the fact that page 0 is already selected. The assumption is not fulfilled for my Lex 3I380CW motherboard with integrated dual i211 based gigabit ethernet. This leads to igb initialization failure and network interfaces are not working: igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k igb: Copyright (c) 2007-2014 Intel Corporation. igb: probe of 0000:01:00.0 failed with error -2 igb: probe of 0000:02:00.0 failed with error -2 In order to fix it, we explicitly select page 0 before first access to phy registers. See also: https://bugzilla.suse.com/show_bug.cgi?id=1009911 See also: http://www.lex.com.tw/products/pdf/3I380A&3I380CW.pdf Fixes: 2a3cdea ("igb: Remove GS40G specific defines/functions") Signed-off-by: Matwey V Kornilov <matwey@sai.msu.ru> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mwifiex: fixup error cases in mwifiex_add_virtual_intf()Brian Norris2017-07-271-36/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 8535107aa4ef92520cbb9a4739563b389c5f8e2c upstream. If we fail to add an interface in mwifiex_add_virtual_intf(), we might hit a BUG_ON() in the networking code, because we didn't tear things down properly. Among the problems: (a) when failing to allocate workqueues, we fail to unregister the netdev before calling free_netdev() (b) even if we do try to unregister the netdev, we're still holding the rtnl lock, so the device never properly unregistered; we'll be at state NETREG_UNREGISTERING, and then hit free_netdev()'s: BUG_ON(dev->reg_state != NETREG_UNREGISTERED); (c) we're allocating some dependent resources (e.g., DFS workqueues) after we've registered the interface; this may or may not cause problems, but it's good practice to allocate these before registering (d) we're not even trying to unwind anything when mwifiex_send_cmd() or mwifiex_sta_init_cmd() fail To fix these issues, let's: * add a stacked set of error handling labels, to keep error handling consistent and properly ordered (resolving (a) and (d)) * move the workqueue allocations before the registration (to resolve (c); also resolves (b) by avoiding error cases where we have to unregister) [Incidentally, it's pretty easy to interrupt the alloc_workqueue() in, e.g., the following: iw phy phy0 interface add mlan0 type station by sending it SIGTERM.] This bugfix covers commits like commit 7d652034d1a0 ("mwifiex: channel switch support for mwifiex"), but parts of this bug exist all the way back to the introduction of dynamic interface handling in commit 93a1df48d224 ("mwifiex: add cfg80211 handlers add/del_virtual_intf"). Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* wlcore: fix 64K page supportArnd Bergmann2017-07-271-3/+3
| | | | | | | | | | | | | | | | | | | | | | commit 4a4274bf2dbbd1c7a45be0c89a1687c9d2eef4a0 upstream. In the stable linux-3.16 branch, I ran into a warning in the wlcore driver: drivers/net/wireless/ti/wlcore/spi.c: In function 'wl12xx_spi_raw_write': drivers/net/wireless/ti/wlcore/spi.c:315:1: error: the frame size of 12848 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] Newer kernels no longer show the warning, but the bug is still there, as the allocation is based on the CPU page size rather than the actual capabilities of the hardware. This replaces the PAGE_SIZE macro with the SZ_4K macro, i.e. 4096 bytes per buffer. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: mvm: fix the recovery flow while connectingEmmanuel Grumbach2017-07-271-7/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 6b28f9784c394f0692e160f81b07c82cb64af160 upstream. In BSS mode in the disconnection flow, mac80211 removes the AP station before the vif is set to unassociated. Our firmware wants it the other way around: first set the vif as unassociated, and then remove the AP station. In order to bridge between those two different behaviors, iwlmvm doesn't remove the station from the firmware when mac80211 removes it, but only after the vif is set to unassociated. The implementation is in iwl_mvm_bss_info_changed_station: if (assoc state was modified && mvmvif->ap_sta_id is VALID && assoc state is now UNASSC) remove_the_station_from_the_firmware() During the recovery flow, mac80211 re-adds the AP station and then reconfigures the vif. Since the vif is not associated, and then, we enter the if above (which was intended to be taken in the disconnection flow only) and remove the station we just added. This defeats the recovery flow. Fix this by not removing the AP station in this flow if we are in recovery flow. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ath9k: fix an invalid pointer dereference in ath9k_rng_stop()Miaoqing Pan2017-07-271-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 07246c115801c27652700e3679bb58661ef7ed65 upstream. The bug was triggered when do suspend/resuming continuously on Dell XPS L322X/0PJHXN version 9333 (2013) with kernel 4.12.0-041200rc4-generic. But can't reproduce on DELL E5440 + AR9300 PCIE chips. The warning is caused by accessing invalid pointer sc->rng_task. sc->rng_task is not be cleared after kthread_stop(sc->rng_task) be called in ath9k_rng_stop(). Because the kthread is stopped before ath9k_rng_kthread() be scheduled. So set sc->rng_task to null after kthread_stop(sc->rng_task) to resolve this issue. WARNING: CPU: 0 PID: 984 at linux/kernel/kthread.c:71 kthread_stop+0xf1/0x100 CPU: 0 PID: 984 Comm: NetworkManager Not tainted 4.12.0-041200rc4-generic #201706042031 Hardware name: Dell Inc. Dell System XPS L322X/0PJHXN, BIOS A09 05/15/2013 task: ffff950170fdda00 task.stack: ffffa22c01538000 RIP: 0010:kthread_stop+0xf1/0x100 RSP: 0018:ffffa22c0153b5b0 EFLAGS: 00010246 RAX: ffffffffa6257800 RBX: ffff950171b79560 RCX: 0000000000000000 RDX: 0000000080000000 RSI: 000000007fffffff RDI: ffff9500ac9a9680 RBP: ffffa22c0153b5c8 R08: 0000000000000000 R09: 0000000000000000 R10: ffffa22c0153b648 R11: ffff9501768004b8 R12: ffff9500ac9a9680 R13: ffff950171b79f70 R14: ffff950171b78780 R15: ffff9501749dc018 FS: 00007f0d6bfd5540(0000) GS:ffff95017f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc190161a08 CR3: 0000000232906000 CR4: 00000000001406f0 Call Trace: ath9k_rng_stop+0x1a/0x20 [ath9k] ath9k_stop+0x3b/0x1d0 [ath9k] drv_stop+0x33/0xf0 [mac80211] ieee80211_stop_device+0x43/0x50 [mac80211] ieee80211_do_stop+0x4f2/0x810 [mac80211] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196043 Reported-by: Giulio Genovese <giulio.genovese@gmail.com> Tested-by: Giulio Genovese <giulio.genovese@gmail.com> Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ath9k: fix tx99 bus errorMiaoqing Pan2017-07-271-2/+0
| | | | | | | | | | | | commit bde717ab473668377fc65872398a102d40cb2d58 upstream. The hard coded register 0x9864 and 0x9924 are invalid for ar9300 chips. Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ath9k: fix tx99 use after freeMiaoqing Pan2017-07-271-4/+9
| | | | | | | | | | | | | | | | | | | | commit cf8ce1ea61b75712a154c93e40f2a5af2e4dd997 upstream. One scenario that could lead to UAF is two threads writing simultaneously to the "tx99" debug file. One of them would set the "start" value to true and follow to ath9k_tx99_init(). Inside the function it would set the sc->tx99_state to true after allocating sc->tx99skb. Then, the other thread would execute write_file_tx99() and call ath9k_tx99_deinit(). sc->tx99_state would be freed. After that, the first thread would continue inside ath9k_tx99_init() and call r = ath9k_tx99_send(sc, sc->tx99_skb, &txctl); that would make use of the freed sc->tx99_skb memory. Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* brcmfmac: Fix glom_skb leak in brcmf_sdiod_recv_chainPeter S. Housel2017-07-211-4/+3
| | | | | | | | | | | | | | | | | | | commit 5ea59db8a375216e6c915c5586f556766673b5a7 upstream. An earlier change to this function (3bdae810721b) fixed a leak in the case of an unsuccessful call to brcmf_sdiod_buffrw(). However, the glom_skb buffer, used for emulating a scattering read, is never used or referenced after its contents are copied into the destination buffers, and therefore always needs to be freed by the end of the function. Fixes: 3bdae810721b ("brcmfmac: Fix glob_skb leak in brcmf_sdiod_recv_chain") Fixes: a413e39a38573 ("brcmfmac: fix brcmf_sdcard_recv_chain() for host without sg support") Signed-off-by: Peter S. Housel <housel@acm.org> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* brcmfmac: Fix a memory leak in error handling path in 'brcmf_cfg80211_attach'Christophe Jaillet2017-07-211-1/+2
| | | | | | | | | | | | | commit 57c00f2fac512837f8de73474ec1f54020015bae upstream. If 'wiphy_new()' fails, we leak 'ops'. Add a new label in the error handling path to free it in such a case. Fixes: 5c22fb85102a7 ("brcmfmac: add wowl gtk rekeying offload support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sfc: don't read beyond unicast address listBert Kenward2017-07-211-5/+3
| | | | | | | | | | | | | | | | [ Upstream commit c70d68150f71b84cea6997a53493e17bf18a54db ] If we have more than 32 unicast MAC addresses assigned to an interface we will read beyond the end of the address table in the driver when adding filters. The next 256 entries store multicast addresses, so we will end up attempting to insert duplicate filters, which is mostly harmless. If we add more than 288 unicast addresses we will then read past the multicast address table, which is likely to be more exciting. Fixes: 12fb0da45c9a ("sfc: clean fallbacks between promisc/normal in efx_ef10_filter_sync_rx_mode") Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* brcmfmac: fix possible buffer overflow in brcmf_cfg80211_mgmt_tx()Arend van Spriel2017-07-211-0/+5
| | | | | | | | | | | | | | | | | | | | [ Upstream commit 8f44c9a41386729fea410e688959ddaa9d51be7c ] The lower level nl80211 code in cfg80211 ensures that "len" is between 25 and NL80211_ATTR_FRAME (2304). We subtract DOT11_MGMT_HDR_LEN (24) from "len" so thats's max of 2280. However, the action_frame->data[] buffer is only BRCMF_FIL_ACTION_FRAME_SIZE (1800) bytes long so this memcpy() can overflow. memcpy(action_frame->data, &buf[DOT11_MGMT_HDR_LEN], le16_to_cpu(action_frame->len)); Cc: stable@vger.kernel.org # 3.9.x Fixes: 18e2f61db3b70 ("brcmfmac: P2P action frame tx.") Reported-by: "freenerguo(郭大兴)" <freenerguo@tencent.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tap: convert a mutex to a spinlockWANG Cong2017-07-211-9/+9
| | | | | | | | | | | | | | | | [ Upstream commit ffa423fb3251f8737303ffc3b0659e86e501808e ] We are not allowed to block on the RCU reader side, so can't just hold the mutex as before. As a quick fix, convert it to a spinlock. Fixes: d9f1f61c0801 ("tap: Extending tap device create/destroy APIs") Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Sainath Grandhi <sainath.grandhi@intel.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cxgb4: fix BUG() on interrupt deallocating path of ULDGuilherme G. Piccoli2017-07-212-22/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 6a146f3a5894b751cef16feb3d7903e45e3c445c ] Since the introduction of ULD (Upper-Layer Drivers), the MSI-X deallocating path changed in cxgb4: the driver frees the interrupts of ULD when unregistering it or on shutdown PCI handler. Problem is that if a MSI-X is not freed before deallocated in the PCI layer, it will trigger a BUG() due to still "alive" interrupt being tentatively quiesced. The below trace was observed when doing a simple unbind of Chelsio's adapter PCI function, like: "echo 001e:80:00.4 > /sys/bus/pci/drivers/cxgb4/unbind" Trace: kernel BUG at drivers/pci/msi.c:352! Oops: Exception in kernel mode, sig: 5 [#1] ... NIP [c0000000005a5e60] free_msi_irqs+0xa0/0x250 LR [c0000000005a5e50] free_msi_irqs+0x90/0x250 Call Trace: [c0000000005a5e50] free_msi_irqs+0x90/0x250 (unreliable) [c0000000005a72c4] pci_disable_msix+0x124/0x180 [d000000011e06708] disable_msi+0x88/0xb0 [cxgb4] [d000000011e06948] free_some_resources+0xa8/0x160 [cxgb4] [d000000011e06d60] remove_one+0x170/0x3c0 [cxgb4] [c00000000058a910] pci_device_remove+0x70/0x110 [c00000000064ef04] device_release_driver_internal+0x1f4/0x2c0 ... This patch fixes the issue by refactoring the shutdown path of ULD on cxgb4 driver, by properly freeing and disabling interrupts on PCI remove handler too. Fixes: 0fbc81b3ad51 ("Allocate resources dynamically for all cxgb4 ULD's") Reported-by: Harsha Thyagaraja <hathyaga@in.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/mlx5e: Initialize CEE's getpermhwaddr address buffer to 0xffHuy Nguyen2017-07-211-0/+2
| | | | | | | | | | | | | | | | | | | | [ Upstream commit d968f0f2e4404152f37ed2384b4a2269dd2dae5a ] Latest change in open-lldp code uses bytes 6-11 of perm_addr buffer as the Ethernet source address for the host TLV packet. Since our driver does not fill these bytes, they stay at zero and the open-lldp code ends up sending the TLV packet with zero source address and the switch drops this packet. The fix is to initialize these bytes to 0xff. The open-lldp code considers 0xff:ff:ff:ff:ff:ff as the invalid address and falls back to use the host's mac address as the Ethernet source address. Fixes: 3a6a931dfb8e ("net/mlx5e: Support DCBX CEE API") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* virtio-net: fix leaking of ctx arrayJason Wang2017-07-211-0/+1
| | | | | | | | | | [ Upstream commit 55281621b6047d2ffb934a0b984ab0cdb1ad1d76 ] Fixes: commit d45b897b11ea ("virtio_net: allow specifying context for rx") Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* vrf: fix bug_on triggered by rx when destroying a vrfNikolay Aleksandrov2017-07-211-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit f630c38ef0d785101363a8992bbd4f302180f86f ] When destroying a VRF device we cleanup the slaves in its ndo_uninit() function, but that causes packets to be switched (skb->dev == vrf being destroyed) even though we're pass the point where the VRF should be receiving any packets while it is being dismantled. This causes a BUG_ON to trigger if we have raw sockets (trace below). The reason is that the inetdev of the VRF has been destroyed but we're still sending packets up the stack with it, so let's free the slaves in the dellink callback as David Ahern suggested. Note that this fix doesn't prevent packets from going up when the VRF device is admin down. [ 35.631371] ------------[ cut here ]------------ [ 35.631603] kernel BUG at net/ipv4/fib_frontend.c:285! [ 35.631854] invalid opcode: 0000 [#1] SMP [ 35.631977] Modules linked in: [ 35.632081] CPU: 2 PID: 22 Comm: ksoftirqd/2 Not tainted 4.12.0-rc7+ #45 [ 35.632247] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 35.632477] task: ffff88005ad68000 task.stack: ffff88005ad64000 [ 35.632632] RIP: 0010:fib_compute_spec_dst+0xfc/0x1ee [ 35.632769] RSP: 0018:ffff88005ad67978 EFLAGS: 00010202 [ 35.632910] RAX: 0000000000000001 RBX: ffff880059a7f200 RCX: 0000000000000000 [ 35.633084] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffff82274af0 [ 35.633256] RBP: ffff88005ad679f8 R08: 000000000001ef70 R09: 0000000000000046 [ 35.633430] R10: ffff88005ad679f8 R11: ffff880037731cb0 R12: 0000000000000001 [ 35.633603] R13: ffff8800599e3000 R14: 0000000000000000 R15: ffff8800599cb852 [ 35.634114] FS: 0000000000000000(0000) GS:ffff88005d900000(0000) knlGS:0000000000000000 [ 35.634306] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 35.634456] CR2: 00007f3563227095 CR3: 000000000201d000 CR4: 00000000000406e0 [ 35.634632] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 35.634865] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 35.635055] Call Trace: [ 35.635271] ? __lock_acquire+0xf0d/0x1117 [ 35.635522] ipv4_pktinfo_prepare+0x82/0x151 [ 35.635831] raw_rcv_skb+0x17/0x3c [ 35.636062] raw_rcv+0xe5/0xf7 [ 35.636287] raw_local_deliver+0x169/0x1d9 [ 35.636534] ip_local_deliver_finish+0x87/0x1c4 [ 35.636820] ip_local_deliver+0x63/0x7f [ 35.637058] ip_rcv_finish+0x340/0x3a1 [ 35.637295] ip_rcv+0x314/0x34a [ 35.637525] __netif_receive_skb_core+0x49f/0x7c5 [ 35.637780] ? lock_acquire+0x13f/0x1d7 [ 35.638018] ? lock_acquire+0x15e/0x1d7 [ 35.638259] __netif_receive_skb+0x1e/0x94 [ 35.638502] ? __netif_receive_skb+0x1e/0x94 [ 35.638748] netif_receive_skb_internal+0x74/0x300 [ 35.639002] ? dev_gro_receive+0x2ed/0x411 [ 35.639246] ? lock_is_held_type+0xc4/0xd2 [ 35.639491] napi_gro_receive+0x105/0x1a0 [ 35.639736] receive_buf+0xc32/0xc74 [ 35.639965] ? detach_buf+0x67/0x153 [ 35.640201] ? virtqueue_get_buf_ctx+0x120/0x176 [ 35.640453] virtnet_poll+0x128/0x1c5 [ 35.640690] net_rx_action+0x103/0x343 [ 35.640932] __do_softirq+0x1c7/0x4b7 [ 35.641171] run_ksoftirqd+0x23/0x5c [ 35.641403] smpboot_thread_fn+0x24f/0x26d [ 35.641646] ? sort_range+0x22/0x22 [ 35.641878] kthread+0x129/0x131 [ 35.642104] ? __list_add+0x31/0x31 [ 35.642335] ? __list_add+0x31/0x31 [ 35.642568] ret_from_fork+0x2a/0x40 [ 35.642804] Code: 05 bd 87 a3 00 01 e8 1f ef 98 ff 4d 85 f6 48 c7 c7 f0 4a 27 82 41 0f 94 c4 31 c9 31 d2 41 0f b6 f4 e8 04 71 a1 ff 45 84 e4 74 02 <0f> 0b 0f b7 93 c4 00 00 00 4d 8b a5 80 05 00 00 48 03 93 d0 00 [ 35.644342] RIP: fib_compute_spec_dst+0xfc/0x1ee RSP: ffff88005ad67978 Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Reported-by: Chris Cormier <chriscormier@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* liquidio: fix bug in soft reset failure detectionDerek Chickles2017-07-212-2/+2
| | | | | | | | | | | | | | | | | | | [ Upstream commit 05a6b4cae8c0cc1680c9dd33a97a49a13c0f01bc ] The code that detects a failed soft reset of Octeon is comparing the wrong value against the reset value of the Octeon SLI_SCRATCH_1 register, resulting in an inability to detect a soft reset failure. Fix it by using the correct value in the comparison, which is any non-zero value. Fixes: f21fb3ed364b ("Add support of Cavium Liquidio ethernet adapters") Fixes: c0eab5b3580a ("liquidio: CN23XX firmware download") Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Satanand Burla <satananda.burla@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* geneve: fix hlist corruptionJiri Benc2017-07-211-16/+32
| | | | | | | | | | | | | [ Upstream commit 4b4c21fad6ae6bd58ff1566f23b0f4f70fdc9a30 ] It's not a good idea to add the same hlist_node to two different hash lists. This leads to various hard to debug memory corruptions. Fixes: 8ed66f0e8235 ("geneve: implement support for IPv6-based tunnels") Cc: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* vxlan: fix hlist corruptionJiri Benc2017-07-211-10/+20
| | | | | | | | | | | | [ Upstream commit 69e766612c4bcb79e19cebed9eed61d4222c1d47 ] It's not a good idea to add the same hlist_node to two different hash lists. This leads to various hard to debug memory corruptions. Fixes: b1be00a6c39f ("vxlan: support both IPv4 and IPv6 sockets in a single vxlan device") Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/mlx5e: Fix TX carrier errors report in get stats ndoGal Pressman2017-07-211-2/+0
| | | | | | | | | | | | [ Upstream commit 8ff93de7668bd81bc8efa819d1184ebd48fae72d ] Symbol error during carrier counter from PPCNT was mistakenly reported as TX carrier errors in get_stats ndo, although it's an RX counter. Fixes: 269e6b3af3bf ("net/mlx5e: Report additional error statistics in get stats ndo") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/mlx5: Cancel delayed recovery work when unloading the driverMohamad Haj Yahia2017-07-212-2/+15
| | | | | | | | | | | | | | | [ Upstream commit 2a0165a034ac024b60cca49c61e46f4afa2e4d98 ] Draining the health workqueue will ignore future health works including the one that report hardware failure and thus we can't enter error state Instead cancel the recovery flow and make sure only recovery flow won't be scheduled. Fixes: 5e44fca50470 ('net/mlx5: Only cancel recovery work when cleaning up device') Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/mlx5: Fix driver load error flow when firmware is stuckGal Pressman2017-07-211-1/+1
| | | | | | | | | | | | [ Upstream commit 8ce59b16b4b6eacedaec1f7b652b4781cdbfe15f ] When wait for firmware init fails, previous code would mistakenly return success and cause inconsistency in the driver state. Fixes: 6c780a0267b8 ("net/mlx5: Wait for FW readiness before initializing command interface") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sfc: fix attempt to translate invalid filter IDEdward Cree2017-06-291-3/+4
| | | | | | | | | | | When filter insertion fails with no rollback, we were trying to convert EFX_EF10_FILTER_ID_INVALID to an id to store in 'ids' (which is either vlan->uc or vlan->mc). This would WARN_ON_ONCE and then record a bogus filter ID of 0x1fff, neither of which is a good thing. Fixes: 0ccb998bf46d ("sfc: fix filter_id misinterpretation in edge case") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* arcnet: com20020-pci: add missing pdev setup in netdev structureMichael Grzeschik2017-06-291-0/+1
| | | | | | | | We add the pdev data to the pci devices netdev structure. This way the interface get consistent device names in the userspace (udev). Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* arcnet: com20020-pci: fix dev_id calculationMichael Grzeschik2017-06-291-2/+3
| | | | | | | | The dev_id was miscalculated. Only the two bits 4-5 are relevant for the MA1 card. PCIARC1 and PCIFB2 use the four bits 4-7 for id selection. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* arcnet: com20020: remove needless base_addr assignmentMichael Grzeschik2017-06-291-2/+0
| | | | | | | The assignment is superfluous. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* Trivial fix to spelling mistake in arc_printk messageColin Ian King2017-06-291-1/+1
| | | | | | Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* arcnet: change irq handler to lock irqsaveMichael Grzeschik2017-06-291-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch prevents the arcnet driver from the following deadlock. [ 41.273910] ====================================================== [ 41.280397] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] [ 41.287433] 4.4.0-00034-gc0ae784 #536 Not tainted [ 41.292366] ------------------------------------------------------ [ 41.298863] arcecho/233 [HC0[0]:SC0[2]:HE0:SE0] is trying to acquire: [ 41.305628] (&(&lp->lock)->rlock){+.+...}, at: [<bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet] [ 41.315199] [ 41.315199] and this task is already holding: [ 41.321324] (_xmit_ARCNET#2){+.-...}, at: [<c06b934c>] packet_direct_xmit+0xfc/0x1c8 [ 41.329593] which would create a new lock dependency: [ 41.334893] (_xmit_ARCNET#2){+.-...} -> (&(&lp->lock)->rlock){+.+...} [ 41.341801] [ 41.341801] but this new dependency connects a SOFTIRQ-irq-safe lock: [ 41.350108] (_xmit_ARCNET#2){+.-...} ... which became SOFTIRQ-irq-safe at: [ 41.357539] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.362677] [<c063ab8c>] dev_watchdog+0x5c/0x264 [ 41.367723] [<c0094edc>] call_timer_fn+0x6c/0xf4 [ 41.372759] [<c00950b8>] run_timer_softirq+0x154/0x210 [ 41.378340] [<c0036b30>] __do_softirq+0x144/0x298 [ 41.383469] [<c0036fb4>] irq_exit+0xcc/0x130 [ 41.388138] [<c0085c50>] __handle_domain_irq+0x60/0xb4 [ 41.393728] [<c0014578>] __irq_svc+0x58/0x78 [ 41.398402] [<c0010274>] arch_cpu_idle+0x24/0x3c [ 41.403443] [<c007127c>] cpu_startup_entry+0x1f8/0x25c [ 41.409029] [<c09adc90>] start_kernel+0x3c0/0x3cc [ 41.414170] [ 41.414170] to a SOFTIRQ-irq-unsafe lock: [ 41.419931] (&(&lp->lock)->rlock){+.+...} ... which became SOFTIRQ-irq-unsafe at: [ 41.427996] ... [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.433409] [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet] [ 41.439646] [<c0089120>] handle_nested_irq+0x8c/0xec [ 41.445063] [<c03c1170>] regmap_irq_thread+0x190/0x314 [ 41.450661] [<c0087244>] irq_thread_fn+0x1c/0x34 [ 41.455700] [<c0087548>] irq_thread+0x13c/0x1dc [ 41.460649] [<c0050f10>] kthread+0xe4/0xf8 [ 41.465158] [<c000f810>] ret_from_fork+0x14/0x24 [ 41.470207] [ 41.470207] other info that might help us debug this: [ 41.470207] [ 41.478627] Possible interrupt unsafe locking scenario: [ 41.478627] [ 41.485763] CPU0 CPU1 [ 41.490521] ---- ---- [ 41.495279] lock(&(&lp->lock)->rlock); [ 41.499414] local_irq_disable(); [ 41.505636] lock(_xmit_ARCNET#2); [ 41.511967] lock(&(&lp->lock)->rlock); [ 41.518741] <Interrupt> [ 41.521490] lock(_xmit_ARCNET#2); [ 41.525356] [ 41.525356] *** DEADLOCK *** [ 41.525356] [ 41.531587] 1 lock held by arcecho/233: [ 41.535617] #0: (_xmit_ARCNET#2){+.-...}, at: [<c06b934c>] packet_direct_xmit+0xfc/0x1c8 [ 41.544355] the dependencies between SOFTIRQ-irq-safe lock and the holding lock: [ 41.552362] -> (_xmit_ARCNET#2){+.-...} ops: 27 { [ 41.557357] HARDIRQ-ON-W at: [ 41.560664] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.567445] [<c063ba28>] dev_deactivate_many+0x114/0x304 [ 41.574866] [<c063bc3c>] dev_deactivate+0x24/0x38 [ 41.581646] [<c0630374>] linkwatch_do_dev+0x40/0x74 [ 41.588613] [<c06305d8>] __linkwatch_run_queue+0xec/0x140 [ 41.596120] [<c0630658>] linkwatch_event+0x2c/0x34 [ 41.602991] [<c004af30>] process_one_work+0x188/0x40c [ 41.610131] [<c004b200>] worker_thread+0x4c/0x480 [ 41.616912] [<c0050f10>] kthread+0xe4/0xf8 [ 41.623048] [<c000f810>] ret_from_fork+0x14/0x24 [ 41.629735] IN-SOFTIRQ-W at: [ 41.633039] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.639820] [<c063ab8c>] dev_watchdog+0x5c/0x264 [ 41.646508] [<c0094edc>] call_timer_fn+0x6c/0xf4 [ 41.653190] [<c00950b8>] run_timer_softirq+0x154/0x210 [ 41.660425] [<c0036b30>] __do_softirq+0x144/0x298 [ 41.667201] [<c0036fb4>] irq_exit+0xcc/0x130 [ 41.673518] [<c0085c50>] __handle_domain_irq+0x60/0xb4 [ 41.680754] [<c0014578>] __irq_svc+0x58/0x78 [ 41.687077] [<c0010274>] arch_cpu_idle+0x24/0x3c [ 41.693769] [<c007127c>] cpu_startup_entry+0x1f8/0x25c [ 41.701006] [<c09adc90>] start_kernel+0x3c0/0x3cc [ 41.707791] INITIAL USE at: [ 41.711003] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.717696] [<c063ba28>] dev_deactivate_many+0x114/0x304 [ 41.725026] [<c063bc3c>] dev_deactivate+0x24/0x38 [ 41.731718] [<c0630374>] linkwatch_do_dev+0x40/0x74 [ 41.738593] [<c06305d8>] __linkwatch_run_queue+0xec/0x140 [ 41.746011] [<c0630658>] linkwatch_event+0x2c/0x34 [ 41.752789] [<c004af30>] process_one_work+0x188/0x40c [ 41.759847] [<c004b200>] worker_thread+0x4c/0x480 [ 41.766541] [<c0050f10>] kthread+0xe4/0xf8 [ 41.772596] [<c000f810>] ret_from_fork+0x14/0x24 [ 41.779198] } [ 41.780945] ... key at: [<c124d620>] netdev_xmit_lock_key+0x38/0x1c8 [ 41.788192] ... acquired at: [ 41.791309] [<c007bed8>] lock_acquire+0x70/0x90 [ 41.796361] [<c06f9140>] _raw_spin_lock_irqsave+0x40/0x54 [ 41.802324] [<bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet] [ 41.808844] [<c06b9380>] packet_direct_xmit+0x130/0x1c8 [ 41.814622] [<c06bc7e4>] packet_sendmsg+0x3b8/0x680 [ 41.820034] [<c05fe8b0>] sock_sendmsg+0x14/0x24 [ 41.825091] [<c05ffd68>] SyS_sendto+0xb8/0xe0 [ 41.829956] [<c05ffda8>] SyS_send+0x18/0x20 [ 41.834638] [<c000f780>] ret_fast_syscall+0x0/0x1c [ 41.839954] [ 41.841514] the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock: [ 41.850302] -> (&(&lp->lock)->rlock){+.+...} ops: 5 { [ 41.855644] HARDIRQ-ON-W at: [ 41.858945] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.865726] [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet] [ 41.873607] [<c0089120>] handle_nested_irq+0x8c/0xec [ 41.880666] [<c03c1170>] regmap_irq_thread+0x190/0x314 [ 41.887901] [<c0087244>] irq_thread_fn+0x1c/0x34 [ 41.894593] [<c0087548>] irq_thread+0x13c/0x1dc [ 41.901195] [<c0050f10>] kthread+0xe4/0xf8 [ 41.907338] [<c000f810>] ret_from_fork+0x14/0x24 [ 41.914025] SOFTIRQ-ON-W at: [ 41.917328] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.924106] [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet] [ 41.931981] [<c0089120>] handle_nested_irq+0x8c/0xec [ 41.939028] [<c03c1170>] regmap_irq_thread+0x190/0x314 [ 41.946264] [<c0087244>] irq_thread_fn+0x1c/0x34 [ 41.952954] [<c0087548>] irq_thread+0x13c/0x1dc [ 41.959548] [<c0050f10>] kthread+0xe4/0xf8 [ 41.965689] [<c000f810>] ret_from_fork+0x14/0x24 [ 41.972379] INITIAL USE at: [ 41.975595] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.982283] [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet] [ 41.990063] [<c0089120>] handle_nested_irq+0x8c/0xec [ 41.997027] [<c03c1170>] regmap_irq_thread+0x190/0x314 [ 42.004172] [<c0087244>] irq_thread_fn+0x1c/0x34 [ 42.010766] [<c0087548>] irq_thread+0x13c/0x1dc [ 42.017267] [<c0050f10>] kthread+0xe4/0xf8 [ 42.023314] [<c000f810>] ret_from_fork+0x14/0x24 [ 42.029903] } [ 42.031648] ... key at: [<bf0854cc>] __key.42091+0x0/0xfffff0f8 [arcnet] [ 42.039255] ... acquired at: [ 42.042372] [<c007bed8>] lock_acquire+0x70/0x90 [ 42.047413] [<c06f9140>] _raw_spin_lock_irqsave+0x40/0x54 [ 42.053364] [<bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet] [ 42.059872] [<c06b9380>] packet_direct_xmit+0x130/0x1c8 [ 42.065634] [<c06bc7e4>] packet_sendmsg+0x3b8/0x680 [ 42.071030] [<c05fe8b0>] sock_sendmsg+0x14/0x24 [ 42.076069] [<c05ffd68>] SyS_sendto+0xb8/0xe0 [ 42.080926] [<c05ffda8>] SyS_send+0x18/0x20 [ 42.085601] [<c000f780>] ret_fast_syscall+0x0/0x1c [ 42.090918] [ 42.092481] [ 42.092481] stack backtrace: [ 42.097065] CPU: 0 PID: 233 Comm: arcecho Not tainted 4.4.0-00034-gc0ae784 #536 [ 42.104751] Hardware name: Generic AM33XX (Flattened Device Tree) [ 42.111183] [<c0017ec8>] (unwind_backtrace) from [<c00139d0>] (show_stack+0x10/0x14) [ 42.119337] [<c00139d0>] (show_stack) from [<c02a82c4>] (dump_stack+0x8c/0x9c) [ 42.126937] [<c02a82c4>] (dump_stack) from [<c0078260>] (check_usage+0x4bc/0x63c) [ 42.134815] [<c0078260>] (check_usage) from [<c0078438>] (check_irq_usage+0x58/0xb0) [ 42.142964] [<c0078438>] (check_irq_usage) from [<c007aaa0>] (__lock_acquire+0x1524/0x20b0) [ 42.151740] [<c007aaa0>] (__lock_acquire) from [<c007bed8>] (lock_acquire+0x70/0x90) [ 42.159886] [<c007bed8>] (lock_acquire) from [<c06f9140>] (_raw_spin_lock_irqsave+0x40/0x54) [ 42.168768] [<c06f9140>] (_raw_spin_lock_irqsave) from [<bf083bc8>] (arcnet_send_packet+0x60/0x1c0 [arcnet]) [ 42.179115] [<bf083bc8>] (arcnet_send_packet [arcnet]) from [<c06b9380>] (packet_direct_xmit+0x130/0x1c8) [ 42.189182] [<c06b9380>] (packet_direct_xmit) from [<c06bc7e4>] (packet_sendmsg+0x3b8/0x680) [ 42.198059] [<c06bc7e4>] (packet_sendmsg) from [<c05fe8b0>] (sock_sendmsg+0x14/0x24) [ 42.206199] [<c05fe8b0>] (sock_sendmsg) from [<c05ffd68>] (SyS_sendto+0xb8/0xe0) [ 42.213978] [<c05ffd68>] (SyS_sendto) from [<c05ffda8>] (SyS_send+0x18/0x20) [ 42.221388] [<c05ffda8>] (SyS_send) from [<c000f780>] (ret_fast_syscall+0x0/0x1c) Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> --- v1 -> v2: removed unneeded zero assignment of flags Signed-off-by: David S. Miller <davem@davemloft.net>
* rocker: move dereference before freeDan Carpenter2017-06-291-1/+1
| | | | | | | | | My static checker complains that ofdpa_neigh_del() can sometimes free "found". It just makes sense to use it first before deleting it. Fixes: ecf244f753e0 ("rocker: fix maybe-uninitialized warning") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlxsw: spectrum_router: Fix NULL pointer dereferenceIdo Schimmel2017-06-291-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case a VLAN device is enslaved to a bridge we shouldn't create a router interface (RIF) for it when it's configured with an IP address. This is already handled by the driver for other types of netdevs, such as physical ports and LAG devices. If this IP address is then removed and the interface is subsequently unlinked from the bridge, a NULL pointer dereference can happen, as the original 802.1d FID was replaced with an rFID which was then deleted. To reproduce: $ ip link set dev enp3s0np9 up $ ip link add name enp3s0np9.111 link enp3s0np9 type vlan id 111 $ ip link set dev enp3s0np9.111 up $ ip link add name br0 type bridge $ ip link set dev br0 up $ ip link set enp3s0np9.111 master br0 $ ip address add dev enp3s0np9.111 192.168.0.1/24 $ ip address del dev enp3s0np9.111 192.168.0.1/24 $ ip link set dev enp3s0np9.111 nomaster Fixes: 99724c18fc66 ("mlxsw: spectrum: Introduce support for router interfaces") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Petr Machata <petrm@mellanox.com> Tested-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* virtio-net: serialize tx routine during resetJason Wang2017-06-291-0/+1
| | | | | | | | | | | | | | | | | We don't hold any tx lock when trying to disable TX during reset, this would lead a use after free since ndo_start_xmit() tries to access the virtqueue which has already been freed. Fix this by using netif_tx_disable() before freeing the vqs, this could make sure no tx after vq freeing. Reported-by: Jean-Philippe Menil <jpmenil@gmail.com> Tested-by: Jean-Philippe Menil <jpmenil@gmail.com> Fixes commit f600b6905015 ("virtio_net: Add XDP support") Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Robert McCabe <robert.mccabe@rockwellcollins.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: usb: asix88179_178a: Add support for the Belkin B2B128Andrew F. Davis2017-06-271-0/+16
| | | | | | | | | | | | | The Belkin B2B128 is a USB 3.0 Hub + Gigabit Ethernet Adapter, the Ethernet adapter uses the ASIX AX88179 USB 3.0 to Gigabit Ethernet chip supported by this driver, add the USB ID for the same. This patch is based on work by Geoffrey Tran <geoffrey.tran@gmail.com> who has indicated they would like this upstreamed by someone more familiar with the upstreaming process. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* fsl/fman: add dependency on HAS_DMAMadalin Bucur2017-06-271-0/+1
| | | | | | | | A previous commit (5567e989198b5a8d) inserted a dependency on DMA API that requires HAS_DMA to be added in Kconfig. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Don't log mc removal needlesslyMintz, Yuval2017-06-251-1/+1
| | | | | | | | | | | | | | When mc configuration changes bnx2x_config_mcast() can return 0 for success, negative for failure and positive for benign reason preventing its immediate work, e.g., when the command awaits the completion of a previously sent command. When removing all configured macs on a 578xx adapter, if a positive value would be returned driver would errneously log it as an error. Fixes: c7b7b483ccc9 ("bnx2x: Don't flush multicast MACs") Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnxt_en: Fix netpoll handling.Michael Chan2017-06-231-6/+48
| | | | | | | | | | | | | | | | | | | | | To handle netpoll properly, the driver must only handle TX packets during NAPI. Handling RX events cause warnings and errors in netpoll mode. The ndo_poll_controller() method should call napi_schedule() directly so that a NAPI weight of zero will be used during netpoll mode. The bnxt_en driver supports 2 ring modes: combined, and separate rx/tx. In separate rx/tx mode, the ndo_poll_controller() method will only process the tx rings. In combined mode, the rx and tx completion entries are mixed in the completion ring and we need to drop the rx entries and recycle the rx buffers. Add a function bnxt_force_rx_discard() to handle this in netpoll mode when we see rx entries in combined ring mode. Reported-by: Calvin Owens <calvinowens@fb.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnxt_en: Add missing logic to handle TPA end error conditions.Michael Chan2017-06-232-4/+9
| | | | | | | | | | When we get a TPA_END completion to handle a completed LRO packet, it is possible that hardware would indicate errors. The current code is not checking for the error condition. Define the proper error bits and the macro to check for this error and abort properly. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dp83640: Avoid NULL pointer dereference.Richard Cochran2017-06-231-1/+1
| | | | | | | | | | | | | | | | | | | | The function, skb_complete_tx_timestamp(), used to allow passing in a NULL pointer for the time stamps, but that was changed in commit 62bccb8cdb69051b95a55ab0c489e3cab261c8ef ("net-timestamp: Make the clone operation stand-alone from phy timestamping"), and the existing call sites, all of which are in the dp83640 driver, were fixed up. Even though the kernel-doc was subsequently updated in commit 7a76a021cd5a292be875fbc616daf03eab1e6996 ("net-timestamp: Update skb_complete_tx_timestamp comment"), still a bug fix from Manfred Rudigier came into the driver using the old semantics. Probably Manfred derived that patch from an older kernel version. This fix should be applied to the stable trees as well. Fixes: 81e8f2e930fe ("net: dp83640: Fix tx timestamp overflow handling.") Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Fix MCDI command size for filter operationsMartin Habets2017-06-221-4/+4
| | | | | | | | | | | | | | The 8000 series adapters uses catch-all filters for encapsulated traffic to support filtering VXLAN, NVGRE and GENEVE traffic. This new filter functionality requires a longer MCDI command. This patch increases the size of buffers on stack that were missed, which fixes a kernel panic from the stack protector. Fixes: 9b41080125176 ("sfc: insert catch-all filters for encapsulated traffic") Signed-off-by: Martin Habets <mhabets@solarflare.com> Acked-by: Edward Cree <ecree@solarflare.com> Acked-by: Bert Kenward bkenward@solarflare.com Signed-off-by: David S. Miller <davem@davemloft.net>
* netvsc: don't access netdev->num_rx_queues directlyArnd Bergmann2017-06-221-2/+2
| | | | | | | | | | | | | | | | | | | | This structure member is hidden behind CONFIG_SYSFS, and we get a build error when that is disabled: drivers/net/hyperv/netvsc_drv.c: In function 'netvsc_set_channels': drivers/net/hyperv/netvsc_drv.c:754:49: error: 'struct net_device' has no member named 'num_rx_queues'; did you mean 'num_tx_queues'? drivers/net/hyperv/netvsc_drv.c: In function 'netvsc_set_rxfh': drivers/net/hyperv/netvsc_drv.c:1181:25: error: 'struct net_device' has no member named 'num_rx_queues'; did you mean 'num_tx_queues'? As the value is only set once to the argument of alloc_netdev_mq(), we can compare against that constant directly. Fixes: ff4a44199012 ("netvsc: allow get/set of RSS indirection table") Fixes: 2b01888d1b45 ("netvsc: allow more flexible setting of number of channels") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* macvlan: Let passthru macvlan correctly restore lower mac addressVlad Yasevich2017-06-221-3/+44
| | | | | | | | | | | | | | | | | | | | Passthru macvlans directly change the mac address of the lower level device. That's OK, but after the macvlan is deleted, the lower device is left with changed address and one needs to reboot to bring back the origina HW addresses. This scenario is actually quite common with passthru macvtap devices. This patch attempts to solve this, by storing the mac address of the lower device in macvlan_port structure and keeping track of it through the changes. After this patch, any changes to the lower device mac address done trough the macvlan device, will be reverted back. Any changs done directly to the lower device mac address will be kept. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* macvlan: convert port passthru to flags.Vlad Yasevich2017-06-221-13/+24
| | | | | | | Convert the port passthru boolean into flags with accesor functions. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* macvlan: Fix passthru macvlan mac address inheritanceVlad Yasevich2017-06-221-1/+2
| | | | | | | | | | | | | | | | | | | | When a lower device of the passthru macvlan changes it's address, passthru macvlan is supposed to change it's own address as well. However, that doesn't happen correctly because the check in macvlan_addr_busy() will catch the fact that the lower level (port) mac address is the same as the address we are trying to assign to the macvlan, and return an error. As a reasult, the address of the passthru macvlan device is never changed. The same thing happens when the user attempts to change the mac address of the passthru macvlan. The simple solution appers to be to not check against the lower device in case of passthru macvlan device, since the 2 addresses are _supposed_ to be the same. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* macvlan: Do not return error when setting the same mac addressVlad Yasevich2017-06-221-0/+4
| | | | | | | | | | | The user currently gets an EBUSY error when attempting to set the mac address on a macvlan device to the same value. This should really be a no-op as nothing changes. Catch the condition and return early. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* xen-netback: correctly schedule rate-limited queuesWei Liu2017-06-223-2/+11
| | | | | | | | | | | | | Add a flag to indicate if a queue is rate-limited. Test the flag in NAPI poll handler and avoid rescheduling the queue if true, otherwise we risk locking up the host. The rescheduling will be done in the timer callback function. Reported-by: Jean-Louis Dupond <jean-louis@dupond.be> Signed-off-by: Wei Liu <wei.liu2@citrix.com> Tested-by: Jean-Louis Dupond <jean-louis@dupond.be> Reviewed-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* veth: Be more robust on network device creation when no attributesSerhey Popovych2017-06-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are number of problems with configuration peer network device in absence of IFLA_VETH_PEER attributes where attributes for main network device shared with peer. First it is not feasible to configure both network devices with same MAC address since this makes communication in such configuration problematic. This case can be reproduced with following sequence: # ip link add address 02:11:22:33:44:55 type veth # ip li sh ... 26: veth0@veth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc \ noop state DOWN mode DEFAULT qlen 1000 link/ether 00:11:22:33:44:55 brd ff:ff:ff:ff:ff:ff 27: veth1@veth0: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc \ noop state DOWN mode DEFAULT qlen 1000 link/ether 00:11:22:33:44:55 brd ff:ff:ff:ff:ff:ff Second it is not possible to register both main and peer network devices with same name, that happens when name for main interface is given with IFLA_IFNAME and same attribute reused for peer. This case can be reproduced with following sequence: # ip link add dev veth1a type veth RTNETLINK answers: File exists To fix both of the cases check if corresponding netlink attributes are taken from peer_tb when valid or name based on rtnl ops kind and random address is used. Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers: net: cpsw-common: Fix reading of mac address for am43 SoCsLokesh Vutla2017-06-221-1/+1
| | | | | | | | | | | cpsw driver tries to get macid for am43xx SoCs using the compatible ti,am4372. But not all variants of am43x uses this complatible like epos evm uses ti,am438x. So use a generic compatible ti,am43 to get macid for all am43 based platforms. Reviewed-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/phy: micrel: configure intterupts after autoneg workaroundZach Brown2017-06-221-0/+2
| | | | | | | | | | | | | | | The commit ("net/phy: micrel: Add workaround for bad autoneg") fixes an autoneg failure case by resetting the hardware. This turns off intterupts. Things will work themselves out if the phy polls, as it will figure out it's state during a poll. However if the phy uses only intterupts, the phy will stall, since interrupts are off. This patch fixes the issue by calling config_intr after resetting the phy. Fixes: d2fd719bcb0e ("net/phy: micrel: Add workaround for bad autoneg ") Signed-off-by: Zach Brown <zach.brown@ni.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'wireless-drivers-for-davem-2017-06-20' of ↵David S. Miller2017-06-206-36/+49
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.12 Two important fixes for brcmfmac. The rest of the brcmfmac patches are either code preparation and fixing a new build warning. brcmfmac * fix a NULL pointer dereference during resume * fix a NULL pointer dereference with USB devices, a regression from v4.12-rc1 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * brcmfmac: fix uninitialized warning in brcmf_usb_probe_phase2()Arend Van Spriel2017-06-161-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes the following warning: drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c: In function 'brcmf_usb_probe_phase2': drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c:1198:2: warning: 'devinfo' may be used uninitialized in this function [-Wmaybe-uninitialized] mutex_unlock(&devinfo->dev_init_lock); Fixes: 6d0507a777fb ("brcmfmac: add parameter to pass error code in firmware callback") Cc: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| * brcmfmac: fix brcmf_fws_add_interface() for USB devicesArend Van Spriel2017-06-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | USB devices rely on queuing functionality provided by the fwsignal module regardless the mode fwsignal is operating in. For this some data structure needs to be reserved which is tied to the interface, which is done by brcmf_fws_add_interface(). However, it checks the mode. Replace that by checking result from brcmf_fws_queue_skbs(). Otherwise the driver will crash in a null pointer dereference when data is transmitted on the interface. Fixes: fc0471e3e884 ("brcmfmac: ignore interfaces when fwsignal is disabled") Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
OpenPOWER on IntegriCloud