summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
Commit message (Collapse)AuthorAgeFilesLines
...
* iwlwifi: fix devices with PCI Device ID 0x34F0 and 11ac RF modulesLuca Coelho2018-08-311-28/+27
| | | | | | | | | | | | | | The devices with PCI device ID 0x34F0 are part of the SoC and can be combined with some different external RF modules. The configuration for these devices should reflect that, but are currently mixed up. To avoid confusion with discrete devices, add part of the firmware to be used and the official name of the device to the cfg structs. This is least reorganization possible (without messing things even more) that could be done as a bugfix for this SoC. Further reorganization of this code will be done separately. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* iwlwifi: remove all occurrences of the FSF address paragraphLuca Coelho2018-08-311-5/+0
| | | | | | | | The Free Software Foundation address is superfluous and causes checkpatch to issue a warning when present. Remove all paragraphs with FSF's address to prevent that. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* Merge tag 'pci-v4.19-changes' of ↵Linus Torvalds2018-08-161-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: - Decode AER errors with names similar to "lspci" (Tyler Baicar) - Expose AER statistics in sysfs (Rajat Jain) - Clear AER status bits selectively based on the type of recovery (Oza Pawandeep) - Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST (Alexandru Gagniuc) - Don't clear AER status bits if we're using the "Firmware-First" strategy where firmware owns the registers (Alexandru Gagniuc) - Use sysfs_match_string() to simplify ASPM sysfs parsing (Andy Shevchenko) - Remove unnecessary includes of <linux/pci-aspm.h> (Bjorn Helgaas) - Defer DPC event handling to work queue (Keith Busch) - Use threaded IRQ for DPC bottom half (Keith Busch) - Print AER status while handling DPC events (Keith Busch) - Work around IDT switch ACS Source Validation erratum (James Puthukattukaran) - Emit diagnostics for all cases of PCIe Link downtraining (Links operating slower than they're capable of) (Alexandru Gagniuc) - Skip VFs when configuring Max Payload Size (Myron Stowe) - Reduce Root Port Max Payload Size if necessary when hot-adding a device below it (Myron Stowe) - Simplify SHPC existence/permission checks (Bjorn Helgaas) - Remove hotplug sample skeleton driver (Lukas Wunner) - Convert pciehp to threaded IRQ handling (Lukas Wunner) - Improve pciehp tolerance of missed events and initially unstable links (Lukas Wunner) - Clear spurious pciehp events on resume (Lukas Wunner) - Add pciehp runtime PM support, including for Thunderbolt controllers (Lukas Wunner) - Support interrupts from pciehp bridges in D3hot (Lukas Wunner) - Mark fall-through switch cases before enabling -Wimplicit-fallthrough (Gustavo A. R. Silva) - Move DMA-debug PCI init from arch code to PCI core (Christoph Hellwig) - Fix pci_request_irq() usage of IRQF_ONESHOT when no handler is supplied (Heiner Kallweit) - Unify PCI and DMA direction #defines (Shunyong Yang) - Add PCI_DEVICE_DATA() macro (Andy Shevchenko) - Check for VPD completion before checking for timeout (Bert Kenward) - Limit Netronome NFP5000 config space size to work around erratum (Jakub Kicinski) - Set IRQCHIP_ONESHOT_SAFE for PCI MSI irqchips (Heiner Kallweit) - Document ACPI description of PCI host bridges (Bjorn Helgaas) - Add "pci=disable_acs_redir=" parameter to disable ACS redirection for peer-to-peer DMA support (we don't have the peer-to-peer support yet; this is just one piece) (Logan Gunthorpe) - Clean up devm_of_pci_get_host_bridge_resources() resource allocation (Jan Kiszka) - Fixup resizable BARs after suspend/resume (Christian König) - Make "pci=earlydump" generic (Sinan Kaya) - Fix ROM BAR access routines to stay in bounds and check for signature correctly (Rex Zhu) - Add DMA alias quirk for Microsemi Switchtec NTB (Doug Meyer) - Expand documentation for pci_add_dma_alias() (Logan Gunthorpe) - To avoid bus errors, enable PASID only if entire path supports End-End TLP prefixes (Sinan Kaya) - Unify slot and bus reset functions and remove hotplug knowledge from callers (Sinan Kaya) - Add Function-Level Reset quirks for Intel and Samsung NVMe devices to fix guest reboot issues (Alex Williamson) - Add function 1 DMA alias quirk for Marvell 88SS9183 PCIe SSD Controller (Bjorn Helgaas) - Remove Xilinx AXI-PCIe host bridge arch dependency (Palmer Dabbelt) - Remove Aardvark outbound window configuration (Evan Wang) - Fix Aardvark bridge window sizing issue (Zachary Zhang) - Convert Aardvark to use pci_host_probe() to reduce code duplication (Thomas Petazzoni) - Correct the Cadence cdns_pcie_writel() signature (Alan Douglas) - Add Cadence support for optional generic PHYs (Alan Douglas) - Add Cadence power management ops (Alan Douglas) - Remove redundant variable from Cadence driver (Colin Ian King) - Add Kirin MSI support (Xiaowei Song) - Drop unnecessary root_bus_nr setting from exynos, imx6, keystone, armada8k, artpec6, designware-plat, histb, qcom, spear13xx (Shawn Guo) - Move link notification settings from DesignWare core to individual drivers (Gustavo Pimentel) - Add endpoint library MSI-X interfaces (Gustavo Pimentel) - Correct signature of endpoint library IRQ interfaces (Gustavo Pimentel) - Add DesignWare endpoint library MSI-X callbacks (Gustavo Pimentel) - Add endpoint library MSI-X test support (Gustavo Pimentel) - Remove unnecessary GFP_ATOMIC from Hyper-V "new child" allocation (Jia-Ju Bai) - Add more devices to Broadcom PAXC quirk (Ray Jui) - Work around corrupted Broadcom PAXC config space to enable SMMU and GICv3 ITS (Ray Jui) - Disable MSI parsing to work around broken Broadcom PAXC logic in some devices (Ray Jui) - Hide unconfigured functions to work around a Broadcom PAXC defect (Ray Jui) - Lower iproc log level to reduce console output during boot (Ray Jui) - Fix mobiveil iomem/phys_addr_t type usage (Lorenzo Pieralisi) - Fix mobiveil missing include file (Lorenzo Pieralisi) - Add mobiveil Kconfig/Makefile support (Lorenzo Pieralisi) - Fix mvebu I/O space remapping issues (Thomas Petazzoni) - Use generic pci_host_bridge in mvebu instead of ARM-specific API (Thomas Petazzoni) - Whitelist VMD devices with fast interrupt handlers to avoid sharing vectors with slow handlers (Keith Busch) * tag 'pci-v4.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (153 commits) PCI/AER: Don't clear AER bits if error handling is Firmware-First PCI: Limit config space size for Netronome NFP5000 PCI/MSI: Set IRQCHIP_ONESHOT_SAFE for PCI-MSI irqchips PCI/VPD: Check for VPD access completion before checking for timeout PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entry PCI: Match Root Port's MPS to endpoint's MPSS as necessary PCI: Skip MPS logic for Virtual Functions (VFs) PCI: Add function 1 DMA alias quirk for Marvell 88SS9183 PCI: Check for PCIe Link downtraining PCI: Add ACS Redirect disable quirk for Intel Sunrise Point PCI: Add device-specific ACS Redirect disable infrastructure PCI: Convert device-specific ACS quirks from NULL termination to ARRAY_SIZE PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer support PCI: Allow specifying devices using a base bus and path of devfns PCI: Make specifying PCI devices in kernel parameters reusable PCI: Hide ACS quirk declarations inside PCI core PCI: Delay after FLR of Intel DC P3700 NVMe PCI: Disable Samsung SM961/PM961 NVMe before FLR PCI: Export pcie_has_flr() PCI: mvebu: Drop bogus comment above mvebu_pcie_map_registers() ...
| * iwlwifi: Remove unnecessary include of <linux/pci-aspm.h>Bjorn Helgaas2018-08-061-1/+0
| | | | | | | | | | | | | | | | This part of the iwlwifi driver doesn't need anything provided by pci-aspm.h, so remove the unnecessary include of it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sinan Kaya <okaya@kernel.org> Acked-by: Luca Coelho <luciano.coelho@intel.com>
* | Merge tag 'wireless-drivers-next-for-davem-2018-08-05' of ↵David S. Miller2018-08-051-5/+22
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.19 This time a bigger pull request as we have two new Mediatek drivers MT76x2u (CONFIG_MT76x2U) and MT76x0U (CONFIG_MT76x0U). Also iwlwifi got support for the new IEEE 802.11ax standard, the successor for 802.11ac. And naturally smaller new features and bugfixes all over. Major changes: wcn36xx * fix WEP in client mode wil6210 * add support for Talyn-MB (Talyn ver 2.0) device * add support for enhanced DMA firmware feature iwlwifi * implement 802.11ax D2.0 * support for the new 22560 device family * new PCI IDs for 22000 and 22560 qtnfmac * implement cfg80211 power management callback * enable multiple SSIDs scan support * qtnfmac: implement basic WoWLAN support mt7601u * fall back to software encryption for hw unsupported ciphers * enable 802.11 Management Frame Protection (MFP) mt76 * support setting RTS threshold * add USB support * add support for MT76x2u devices * add support for MT76x0U devices mwifiex * allow user space to set all other IEs except WMM IE rsi * add firmware support for AP+BT dual mode ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * | iwlwifi: pcie: don't access periphery registers when not availableEmmanuel Grumbach2018-08-021-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The periphery can't be accessed before we set the INIT_DONE bit which initializes the device. A previous patch added a reconfiguration of the MSI-X tables upon resume, but at that point in the flow, INIT_DONE wasn't set. Since the reconfiguration of the MSI-X tables require periphery access, it failed. The difference between WoWLAN and without WoWLAN is that in WoWLAN, iwl_trans_pcie_d3_suspend clears the INIT_DONE without clearing the STATUS_DEVICE_ENABLED bit in the software status. Because of that, the resume code thinks that the device is enabled, but the INIT_DONE bit has been cleared. To fix this, don't reconfigure the MSI-X tables in case WoWLAN is enabled. It will be done in iwl_trans_pcie_d3_resume anyway. Fixes: 52848a79b9d2 ("iwlwifi: pcie: reconfigure MSI-X HW on resume") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
| * | iwlwifi: pcie: add a bunch of PCI IDs for 22000 and 22560Luca Coelho2018-08-021-3/+18
| | | | | | | | | | | | | | | | | | Add some missing PCI IDs for 22000 and 22560 devices. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
| * | iwlwifi: add support for 22560 devicesLuca Coelho2018-07-261-2/+0
| |/ | | | | | | | | | | | | | | Add support for the new 22560 family of devices and, while at it, reorganize the 22000 family so it fits better with the new one. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* / iwlwifi: add more card IDs for 9000 seriesEmmanuel Grumbach2018-07-251-0/+22
|/ | | | | | | | Add new device IDs for the 9000 series. Cc: stable@vger.kernel.org # 4.14 Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* iwlwifi: add csr configuration for 6300 devicesGolan Ben Ami2018-05-291-0/+3
| | | | | | | | | | | | | | | | | Recently we have switched the csr addresses and values configuration from a single configuration to all devices to a per-device configuration. Doing that, the configuration for 6300 devices wasn't set. This missing definition introduced a kernel panic once trying to access the csr's. Add the missing 6300 csr configuration. While at it, add a checker that the csr values were indeed configured, and bail out more gracefully if not. Fixes: a8cbb46f831d ("iwlwifi: allow different csr flags for different device families") Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* iwlwifi: add a bunch of new 9000 PCI IDsLuca Coelho2018-03-281-2/+155
| | | | | | | | A lot of new PCI IDs were added for the 9000 series. Add them to the list of supported PCI IDs. Cc: stable@vger.kernel.org # 4.13+ Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* iwlwifi: add shared clock PHY config flag for some devicesLuca Coelho2018-03-161-19/+19
| | | | | | | | | | | | | Some devices use a shared clock which is very sensitive to variations and cause trouble in some situations. We need to set a bit in the phy configuration to indicate that to the FW. To make this generic, add a extra_phy_config_flags element to the device configuration and OR it into the phy_cfg before sending it to the firmware. And also create a set of configurations for devices that use shared clocks and need this extra bit to be set. Fixes: c62446d2b028 ("iwlwifi: add new 9460 series PCI IDs") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* Merge tag 'wireless-drivers-next-for-davem-2017-12-18' of ↵David S. Miller2017-12-191-19/+19
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next The drivers/net/wireless/intel/iwlwifi/pcie/drv.c conflict was resolved using a diff provided by Kalle in his pull request. Kalle Valo says: ==================== wireless-drivers-next patches for 4.16 A bigger pull request this time, the most visible change being the new driver mt76. But there's also Kconfig refactoring in ath9k and ath10k, work beginning in iwlwifi to have rate scaling in firmware/hardware, wcn3990 support getting closer in ath10k and lots of smaller changes. mt76 * a new driver for MT76x2e, a 2x2 PCIe 802.11ac chipset by MediaTek ath10k * enable multiqueue support for all hw using mac80211 wake_tx_queue op * new Kconfig option ATH10K_SPECTRAL to save RAM * show tx stats on QCA9880 * new qcom,ath10k-calibration-variant DT entry * WMI layer support for wcn3990 ath9k * new Kconfig option ATH9K_COMMON_SPECTRAL to save RAM wcn36xx * hardware scan offload support wil6210 * run-time PM support when interface is down iwlwifi * initial work for rate-scaling offload * Support for new FW API version 36 * Rename the temporary hw name A000 to 22000 ssb * make SSB a menuconfig to ease disabling it all mwl8k * enable non-DFS 5G channels 149-165 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge tag 'iwlwifi-next-for-kalle-2017-11-29' of ↵Kalle Valo2017-12-021-18/+18
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next First batch of iwlwifi updates for v4.16 * Rename the temporary name A000 to 22000; * Change in the way we print the firmware version; * Remove some unused code; * Other small improvements; kvalo: There were conflicts, I fixed them with taking into account commit c2c48ddfc8b0 ("iwlwifi: fix firmware names for 9000 and A000 series hw"): CONFLICT (content): Merge conflict in drivers/net/wireless/intel/iwlwifi/iwl-config.h CONFLICT (modify/delete): drivers/net/wireless/intel/iwlwifi/cfg/a000.c deleted in ca495785063c428641cc6df8888afd2587ca6677 and modified in HEAD. Version HEAD of drivers/net/wireless/intel/iwlwifi/cfg/a000.c left in tree.
| | * iwlwifi: rename the temporary name of A000 to the official 22000Luca Coelho2017-11-281-18/+18
| | | | | | | | | | | | | | | | | | | | | | | | The family name A000 was just a place-holder when we didn't know what the official name would be yet. Now we know that the family name is 22000, so rename all occurrences accordingly. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* | | iwlwifi: add new cards for 9260 and 22000 seriesIhab Zhaika2017-12-051-0/+2
|/ / | | | | | | | | | | | | | | add 1 PCI ID for 9260 series and 1 for 22000 series. Cc: stable@vger.kernel.org Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* / iwlwifi: fix PCI IDs and configuration mapping for 9000 seriesLuca Coelho2017-11-161-29/+103
|/ | | | | | | | | | | | | | | A lot of PCI IDs were missing and there were some problems with the configuration and firmware selection for devices on the 9000 series. Fix the firmware selection by adding files for the B-steps; add configuration for some integrated devices; and add a bunch of PCI IDs (mostly for integrated devices) that were missing from the driver's list. Without this patch, a lot of devices will not be recognized or will try to load the wrong firmware file. Cc: stable@vger.kernel.org # 4.13 Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* iwlwifi: add new cards for a000 seriesIhab Zhaika2017-11-031-0/+5
| | | | | | | add four new PCI ID'S for a000 series Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* iwlwifi: add new cards for 8265 seriesIhab Zhaika2017-11-031-0/+2
| | | | | | | add two new PCI ID'S for 8265 series Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* iwlwifi: add new cards for 8260 seriesIhab Zhaika2017-11-031-0/+3
| | | | | | | add three new PCI ID'S for 8260 series Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* iwlwifi: pcie: sort IDs for the 9000 series for easier comparisonsLuca Coelho2017-10-181-42/+42
| | | | | | | | It's hard to find values that are missing in the list, so sorting the values and comparing them makes it much easier. To simplify this task, sort the devices in the list. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* iwlwifi: remove dflt_pwr_limit from the transportLuca Coelho2017-10-061-3/+0
| | | | | | | | | | | | | The default power limit read from the SPLC method in ACPI doesn't have anything to do with the transport and is only used in the opmode, so we can remove it from the trans. Additionally, this value is only user when the opmode is starting, so we don't need to store it anywhere. Remove the dflt_pwr_limit element from the trans and move call to iwl_acpi_get_pwr_limit() call to mvm. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* iwlwifi: acpi: move code that reads SPLC to acpiLuca Coelho2017-10-061-23/+2
| | | | | | | | Move most of the set_dflt_pwr_limit() function to acpi.c and make it return the pwr_limit value instead of setting directly. Also rename it to iwl_acpi_get_pwr_limit(). Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* iwlwifi: acpi: remove a couple of unnecessary ifdefsLuca Coelho2017-10-061-6/+0
| | | | | | | Some of the #ifdef CONFIG_ACPI are not needed anymore, so they can be removed. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* iwlwifi: acpi: use iwl_acpi_get_wifi_pkg when reading reading SPLCLuca Coelho2017-10-061-51/+10
| | | | | | | | Instead of finding the wifi package with its own code, we can reuse the new iwl_acpi_get_wifi_pkg() function when reading the default power limit from SPLC. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* iwlwifi: acpi: move ACPI method definitions to acpi.hLuca Coelho2017-10-061-4/+1
| | | | | | | | Instead of defining each method where they are used and re-defining WIFI_DOMAIN in each one of them, move all the definitions to a central place and define the domain only a single time. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* iwlwifi: acpi: add common code to read from ACPILuca Coelho2017-10-061-26/+7
| | | | | | | | | | | | | There are many places where the same process of invoking a method from ACPI is used, causing a lot of duplicate code. To improve this, introduce a new function to get an ACPI object by invoking an ACPI method that can be reused. Additionally, since this function needs to be called when we only have the trans, the opmode or the device, introduce a new debug macro that gets the device as a parameter so it can be used in the new function. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* iwlwifi: add a new a000 deviceOren Givon2017-10-061-0/+1
| | | | | | | Add a new a000 device with PCI ID (0x2720, 0x0030). Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* iwlwifi: fix wrong struct for a000 deviceOren Givon2017-10-061-1/+1
| | | | | | | | | The PCI ID (0x2720, 0x0070) was set with the config struct iwla000_2ax_cfg_hr instead of iwla000_2ac_cfg_hr_cdb. Fixes: 175b87c69253 ("iwlwifi: add the new a000_2ax series") Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers.gitKalle Valo2017-08-241-0/+20
|\ | | | | | | | | | | Stephen Rothwell reported quite a few conflicts in iwlwifi between wireless-drivers and wireless-drivers-next. To avoid any problems later in other trees merge w-d to w-d-next to fix those conflicts early.
| * iwlwifi: add the new 9000 series PCI IDsTzipi Peres2017-08-011-0/+20
| | | | | | | | | | | | | | | | | | | | | | Add two PCI IDs for the 9160 series. Add five PCI IDs for the 9260 series. Add one PCI IDs for the 9270 series. Add seven PCI IDs for the 9460 series. Add five PCI IDs for the 9560 series. Signed-off-by: Tzipi Peres <tzipi.peres@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* | iwlwifi: pci: add new PCI ID for 7265DLuca Coelho2017-08-181-0/+1
| | | | | | | | | | | | | | We have a new PCI subsystem ID for 7265D. Add it to the list. Cc: stable@vger.kernel.org Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* | iwlwifi: distinguish different RF modules in A000 devicesTzipi Peres2017-08-181-6/+17
| | | | | | | | | | | | | | | | | | | | Newer versions of A000 devices come with two diffenent RF modules. The PCI_ID, the subsystem ID and the RF ID are identical in these two cases, so we need to differentiate them by using the CSR_HW_RF_ID register- in order to load the appropriate firmware. Signed-off-by: Tzipi Peres <tzipi.peres@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* | iwlwifi: pcie: rename iwl_trans_check_hw_rf_kill() to pcieJohannes Berg2017-08-011-2/+2
|/ | | | | | | | | Rename this function to the more appropriate iwl_pcie_check_hw_rf_kill() since it's only a function in the pcie code and cannot be called from any other place. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* iwlwifi: pcie: reconfigure MSI-X HW on resumeJohannes Berg2017-06-291-0/+3
| | | | | | | | | | | | | When going into suspend, the HW configuration for MSI-X will likely be lost. As a consequence, after waking up, all IRQ causes will be mapped to interrupt 0, and as a consequence we don't notice the interrupt because in most cases this is an interrupt for a queue, and getting it doesn't read the other cause registers. Fixes: 2e5d4a8f61dc ("iwlwifi: pcie: Add new configuration to enable MSIX") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* iwlwifi: unify external & internal modparam namesJohannes Berg2017-06-291-1/+1
| | | | | | | | | Where possible (all except for "11n_disable", which isn't valid in C) rename the internal names for module parameters to be the same as the externally visible names, to aid finding their use etc. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* iwlwifi: add twelve new 9560 series PCI IDsTzipi Peres2017-06-291-1/+14
| | | | | | | Add twelve new PCI IDs for the 9560 series. Signed-off-by: Tzipi Peres <tzipi.peres@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* iwlwifi: add the new a000_2ax seriesTzipi Peres2017-06-291-0/+5
| | | | | | | | Add a new config struct for the new a000 2ax series and add the five PCI ID for it. Signed-off-by: Tzipi Peres <tzipi.peres@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* iwlwifi: pcie: don't report RF-kill enabled while shutting downJohannes Berg2017-06-231-8/+4
| | | | | | | | | | | | | | | | | | | | | | When toggling the RF-kill pin quickly in succession, the driver can get rather confused because it might be in the process of shutting down, expecting all commands to go through quickly due to rfkill, but the transport already thinks the device is accessible again, even though it previously shut it down. This leads to bugs, and I even observed a kernel panic. Avoid this by making the PCIe code only report that the radio is enabled again after the higher layers actually decided to shut it off. This also pulls out this common RF-kill checking code into a common function called by both transport generations and also moves it to the direct method - in the internal helper we don't really care about the RF-kill status anymore since we won't report it up until the stop anyway. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* iwlwifi: update device ID for a000 familySara Sharon2017-06-021-5/+7
| | | | | | | | Three configurations will share device ID 2720, and will be differentiated by RF ID. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* iwlwifi: support a000 CDB productSara Sharon2017-04-191-3/+4
| | | | | | | Identify and load FW for a000 CDB product. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* iwlwifi: add four new 8265 and 8275 series PCI IDsTzipi Peres2017-04-191-0/+4
| | | | | | | | Add one new PCI ID for the 8265 series. Add three new PCI ID for the 8275 series. Signed-off-by: Tzipi Peres <tzipi.peres@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* iwlwifi: remove support for deprecated RFLuca Coelho2017-04-111-12/+5
| | | | | | | One of the RF modules we support has been deprecated and never released publicly. Remove support for this module. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* iwlwifi: pcie: fix another RF-kill raceJohannes Berg2017-02-061-3/+4
| | | | | | | | | | | | | | | | | | | | | | When resuming, it's possible for the following scenario to occur: * iwl_pci_resume() enables the RF-kill interrupt * iwl_pci_resume() reads the RF-kill state (e.g. to 'radio enabled') * RF_KILL interrupt triggers, and iwl_pcie_irq_handler() reads the state, now 'radio disabled', and acquires the &trans_pcie->mutex. * iwl_pcie_irq_handler() further calls iwl_trans_pcie_rf_kill() to indicate to the higher layers that the radio is now disabled (and stops the device while at it) * iwl_pcie_irq_handler() drops the mutex * iwl_pci_resume() continues, acquires the mutex and calls the higher layers to indicate that the radio is enabled. At this point, the device is stopped but the higher layers think it's available, and can call deeply into the driver to try to enable it. However, this will fail since the device is actually disabled. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* iwlwifi: support two phys for a000 devicesSara Sharon2017-02-061-1/+7
| | | | | | | | | | Support differentiating between two phys for a000 devices in order to load the correct firmware. Eventually when moving completely to the new phy we will be able to remove this. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* iwlwifi: remove unnecessary argument to iwl_drv_start()Luca Coelho2017-02-061-1/+1
| | | | | | | | | When iwl_drv_start() is called, trans->cfg must already be set, so there's no need to pass cfg separately, since it can be accessed directly from trans->cfg. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* iwlwifi: pcie: fix SPLC structure parsingLuca Coelho2016-10-191-31/+48
| | | | | | | | | | | | | | | | | | | The SPLC data parsing is too restrictive and was not trying find the correct element for WiFi. This causes problems with some BIOSes where the SPLC method exists, but doesn't have a WiFi entry on the first element of the list. The domain type values are also incorrect according to the specification. Fix this by complying with the actual specification. Additionally, replace all occurrences of SPLX to SPLC, since SPLX is only a structure internal to the ACPI tables, and may not even exist. Fixes: bcb079a14d75 ("iwlwifi: pcie: retrieve and parse ACPI power limitations") Reported-by: Chris Rorvick <chris@rorvick.com> Tested-by: Paul Bolle <pebolle@tiscali.nl> Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* iwlwifi: add two new 9560 series PCI IDsOren Givon2016-09-221-0/+2
| | | | | | | Add two new PCI IDs for the 9560 series. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* iwlwifi: add new 8265 series PCI IDOren Givon2016-09-191-0/+1
| | | | | | | Add a new PCI ID for the 8265 series. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
* iwlwifi: add the new 8275 seriesOren Givon2016-09-161-0/+1
| | | | | | | | Add a new config struct for the new 8275 series and add the first PCI ID for it. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
OpenPOWER on IntegriCloud