summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath
Commit message (Collapse)AuthorAgeFilesLines
* ath5k: don't use PCI ID to find the chip revisionPavel Roskin2009-08-283-25/+29
| | | | | | | | | | | | | | AR5K_SREV is available even if the chip has been put to sleep. Relying on the chip register allows binding non-standard PCI IDs by echo VENDOR_ID PRODUCT_ID >/sys/bus/pci/drivers/ath5k/new_id without having to specify the driver data as well. Signed-off-by: Pavel Roskin <proski@gnu.org> Acked-by: Bob Copeland <me@bobcopeland.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: fix uninitialized value use in ath5k_eeprom_read_turbo_modes()Pavel Roskin2009-08-281-24/+5
| | | | | | | | | | | | | | | | | | | | | | | | | The `val' variable in ath5k_eeprom_read_turbo_modes() is used uninitialized. gcc 4.4.1 with -fno-inline-functions-called-once reports it: eeprom.c: In function 'ath5k_eeprom_read_turbo_modes': eeprom.c:441: warning: 'val' may be used uninitialized in this function Comparing the code to the Atheros HAL, it's clear that the split between ath5k_eeprom_read_modes() and ath5k_eeprom_read_turbo_modes() was incorrect. The Atheros HAL reads both turbo and non-turbo data from EEPROM in one function. Some turbo mode parameters are derived from the same EEPROM values as non-turbo parameters, just from different bits. Merge ath5k_eeprom_read_turbo_modes() into ath5k_eeprom_read_modes() to fix the warning. The actual values and offsets have been cross-checked against Atheros HAL. Signed-off-by: Pavel Roskin <proski@gnu.org> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: clarify srev comparison for CCMP checkBob Copeland2009-08-282-5/+3
| | | | | | | | | | As Pavel Roskin noted, the check for mac version as copied from legacy_hal made no sense. This replaces it with the equivalent and makes up a suitable #define for the mac version legacy_hal checked. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Add Bluetooth Coexistence 3-wire supportVasanthakumar Thiagarajan2009-08-289-27/+423
| | | | | | | | This patch adds 3-wire bluetooth coex support for AR9285. This support can be enabled through btcoex_enable modparam. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Add infrastructure for generic hw timersVasanthakumar Thiagarajan2009-08-284-2/+278
| | | | | Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Remove hw capability bit meant for btcoexVasanthakumar Thiagarajan2009-08-283-7/+3
| | | | | | | | We don't need a hw cap bit for btcoex anymore as btcoex scheme type is enough to do this. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Determine btcoex scheme type based on chip versionVasanthakumar Thiagarajan2009-08-283-3/+20
| | | | | Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Move btcoex related data to a separate structVasanthakumar Thiagarajan2009-08-285-9/+22
| | | | | | | Also define macros for wlanactive and btactive (5 & 6) gpios. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Configure btcoex register during every resetVasanthakumar Thiagarajan2009-08-281-0/+3
| | | | | | | | | Make sure btcoex register configured with appropriate values after it is initialized with the default values from initvals.h during reset. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Move btcoex stuff from hw.[ch] to new btcoex.[ch]Vasanthakumar Thiagarajan2009-08-286-47/+82
| | | | | Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Split ath9k_hw_btcoex_enable() into two logical piecesVasanthakumar Thiagarajan2009-08-284-3/+28
| | | | | | | | | | | This function currently does initialization + enable the btcoex support. Split it into two logical functions which does the above operations separately. Btcoex initialization is done during attach time and enabling this feature is done in start(). Also, add code to disable btcoex support in stop(). Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Wrap DMA dump function with PS wakeup/restoreSujith2009-08-281-0/+4
| | | | | | | When dumping register contents, HW has to be awake. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Update INITVALs for AR9285Sujith2009-08-281-5/+5
| | | | | Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Handle PA cal usage properlySujith2009-08-281-0/+5
| | | | | | | PA Calibration is not needed for high power solutions. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Fix bugs in programming registers during PA CALSujith2009-08-281-3/+2
| | | | | | | | | | * First PA driver (PDPADRV1) was not powered down properly. * Compensation capacitor for dynamic PA was programmed incorrectly. Also, remove a stray REG_READ. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Reduce the frequency of PA offset calibrationSujith2009-08-283-4/+29
| | | | | | | | | PA calibration need not be done if the offset is not varying. The current logic does PA calibration even if the offset is the same. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Fix read buffer overflowRoel Kluin2009-08-281-8/+8
| | | | | | | Prevent a read of powInfo[-1] in the first iteration. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: add hardware CCMP encyption supportBob Copeland2009-08-283-0/+14
| | | | | | | | Recent ath5k hardware is capable of doing CCMP acceleration. Enable it for the cards that support it. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: use the skb->cb directly for RX statusBob Copeland2009-08-281-20/+21
| | | | | | | | Save a memcpy by just storing updates directly in the skb control block. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: add led pin configuration for compaq c700 laptopMarcos Chaparro2009-08-281-0/+2
| | | | | | | | | | | With this patch, a compaq c700 can turn on the wifi led. The array of compatible devices now includes the hardware present in this computer, as well as the led pin and polarity. Signed-off-by: Marcos Chaparro <nitrousnrg@gmail.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: clean up filter flags settingBob Copeland2009-08-281-16/+23
| | | | | | | | | | | | | | The maze of if() statements in configure_filter is confusing. Reorganizing it as a switch statement makes it more apparent what is going on and reveals several suspicious settings. This has no functional changes, though it does remove some redundant flags that are set earlier. Also now that we can sleep, protect sc->filter_flags with the sc lock. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ar9170: remove unnecessary call to ar9170_set_beacon_timersJoerg Albert2009-08-281-6/+0
| | | | | | Signed-off-by: Joerg Albert <jal2@gmx.de> Acked-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ar9170: cleanup of bss_info_changed and beacon configJoerg Albert2009-08-283-18/+21
| | | | | | | | | Add beacon control by BSS_CHANGED_BEACON_ENABLED and bss_conf->enable_beacon from mac80211. Signed-off-by: Joerg Albert <jal2@gmx.de> Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Fix chainmask selection during scanningSujith2009-08-281-1/+6
| | | | | | | | | | | | The TX/RX chainmasks were set to 1x1 during scanning. Configure them properly with the values retrieved from the EEPROM. Also, this requires scan_start/scan_end callbacks to be locked with sc->mutex. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Add support FIF_OTHER_BSS filtering mode.Javier Cardona2009-08-281-3/+4
| | | | | | | | | Support for FIF_OTHER_BSS was missing. This patch adds support for this filtering mode which in turn resolves a problem where mesh interfaces would not receive broadcast traffic. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Nuke struct ath9k_node_statsVasanthakumar Thiagarajan2009-08-205-25/+8
| | | | | | | | | | Other than ns_avgbrssi (Average beacon rssi) no data of ath9k_node_stats is being used anywhere. Nuke this structure and move its only useful member to ar5416Anistate. Also cleanup this redundant data in ath_softc. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Fix bug in retrieving average beacon rssiVasanthakumar Thiagarajan2009-08-201-6/+1
| | | | | | | | | | | | Currently the beacon rssi that LPF gives is divided and rounded up by ATH_RSSI_EP_MULTIPLIER twice. This will leave the incorrect rssi in ANI. Having correct rssi in ANI fixes the connection stability at < 30dB rssi range. This patch removes the unncessary computation of average rssi over already valid average rssi. Also removes the redundant macros to find average rssi. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ar9170: refactor configure_filterChristian Lamparter2009-08-203-84/+27
| | | | | | | | Thanks to "mac80211: allow configure_filter callback to sleep", we no longer have to defer the work to the workqueue. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath: move regulatory info into shared common structureLuis R. Rodriguez2009-08-2015-79/+116
| | | | | | | | | This moves the shared regulatory structure into the common structure. We will use this ongoing for common data. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Fix TX poll cancellingSujith2009-08-201-4/+3
| | | | | | | | | In ath9k_stop(), tx_complete_work was being cancelled twice. This patch fixes it. Also, locking sc->mutex should be done at the beginning. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: allow configure_filter callback to sleepJohannes Berg2009-08-203-45/+65
| | | | | | | | | | | | | | | | | | | | | Over time, a whole bunch of drivers have come up with their own scheme to delay the configure_filter operation to a workqueue. To be able to simplify things, allow configure_filter to sleep, and add a new prepare_multicast callback that drivers that need the multicast address list implement. This new callback must be atomic, but most drivers either don't care or just calculate a hash which can be done atomically and then uploaded to the hardware non-atomically. A cursory look suggests that at76c50x-usb, ar9170, mwl8k (which is actually very broken now), rt2x00, wl1251, wl1271 and zd1211 should make use of this new capability. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Updates for AR9287_12 version of chipset.Vivek Natarajan2009-08-202-4/+11
| | | | | | | Enable AsyncFIFO and AGGWEP for AR9287_12 and later revisions only. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Fix ref power interpolation logic for AR9287 chipsets.Vivek Natarajan2009-08-201-9/+3
| | | | | Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Enable LEDs for AR9287 chipsets.Vivek Natarajan2009-08-204-15/+22
| | | | | Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Set AR_WA for AR9287 as it improves consistency in throughput.Vivek Natarajan2009-08-201-1/+1
| | | | | Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Add open loop power control support for AR9287.Vivek Natarajan2009-08-203-19/+52
| | | | | Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Set HW state properlySujith2009-08-141-0/+1
| | | | | | | | | | This patch fixes a bug in ath9k_stop() where the HW was not put into FULL_SLEEP state. Not doing so will cause issues in suspend-resume and the HW will not respond to chip resets. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Fix bug in PCI resumeSujith2009-08-141-1/+3
| | | | | | | | This patch fixes a bug where the device was enabled before restoring the PCI state. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Remove duplicate variablesSujith2009-08-143-21/+14
| | | | | | | | | diversity_control and antenna_switch_swap are already present in ath9k_ops_config. Remove duplicate occurrences in ath_hw. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Remove has_hw_phycountersSujith2009-08-144-112/+88
| | | | | | | | PHY counters are available in all chipsets supported by ath9k. Remove the check. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: update kconfig to indicate support for AR9002 familyLuis R. Rodriguez2009-08-141-1/+7
| | | | | | | | | | | | | | ath9k supports the AR9002 family of chipsets. This includes the AR9285 and the miniPCI AR9223 and AR9220 (which themselves have AR9280+AR5133). We now refer people to the wiki page as it seems this is not as popular as we would have hoped. Reported-by: JD <jd1008@gmail.com> Cc: Dakota Lee <Dakota.Lee@Atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: use bit shift operators for cache line sizeLuis R. Rodriguez2009-08-141-2/+2
| | | | | | | This matches ath9k, providing consistency when reading both drivers. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: use common ath.ko ath_rxbuf_alloc()Luis R. Rodriguez2009-08-142-15/+9
| | | | | | | Now that its shared we can remove ath5k's own implementation. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath: add common ath_rxbuf_alloc() and make ath9k use itLuis R. Rodriguez2009-08-146-41/+75
| | | | | | | | | | | | | | | | Turns out ath5k and ath9k can share the same helper to allocates RX skbs. We allocate skbs aligned to the cache line size. This requirement seems to have come from AR5210; when this was not done it seems sometimes we'd get bogus data. I'm also told it may have been a performance enhancement consideration. In the end I can't be sure we can remove this on new hardware so just keep this and start sharing it through ath.ko. Make ath9k start using this, ath5k is next. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: Use SWI to trigger calibrationNick Kossifidis2009-08-144-11/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | * Get rid of calibration timer, instead use a software interrupt to schedule the calibration tasklet. a) We don't need a timer for this, there is no need for accuracy even with round_jiffies i think this is a waste of resources. Also we don't need to run calibration if we are idle (no interrupts). b) When we add ANI support we 'll just extend the poll function and calibration tasklet and handle all periodic phy calibration on one place (much cleaner). c) Having calibration on a tasklet is better since during calibration we can't transmit or receive (antennas are detached to measure noise floor), previously calibration could run in parallel with tx/rx and interfere (packet loss). v2: kill tasklet on stop_hw, stop/wake queues v3: use time_is_before_eq_jiffies to compare timestamp with current time Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: Preserve pcicfg bits during attachNick Kossifidis2009-08-141-1/+1
| | | | | | | | * During attach preserve pcicfg bits when enabling pci core sw retry fix. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: Wakeup fixesNick Kossifidis2009-08-144-62/+140
| | | | | | | | | | | | | * Don't put chip to full sleep because there are problems during wakeup. Instead hold MAC/Baseband on warm reset state via a new function ath5k_hw_on_hold. * Minor cleanups Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Tested-by: Ben Greear <greearb@candelatech.com> Tested-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: Linear PCDAC code fixesNick Kossifidis2009-08-141-7/+17
| | | | | | | | | | | | | | * Set correct xpd curve indices for high/low gain curves during rfbuffer setup on RF5112B with both calibration curves available. * Don't return zero min power when we have the same pcdac value twice because it breaks interpolation. Instead return the right x barrier as we do when we have equal power levels for 2 different pcdac values. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: Check EEPROM before tweaking SERDESNick Kossifidis2009-08-143-22/+48
| | | | | | | | | | | * Read PCI-E infos offset from EEPROM and if it points to serdes section (0x40), enable serdes programming (further tweaking of serdes values during attach). This follows Legacy and Sam's HAL sources. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Fix regression on receiving PS poll framesLuis R. Rodriguez2009-08-141-0/+1
| | | | | | | | | | | | | | In the the patch: ath9k: use new FIF_PSPOLL configure filter I forgot to add the new FIF_PSPOLL to the supported mask. Without this we mask out the FIF_PSPOLL flag therefore we'd ignore it from mac80211. Cc: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
OpenPOWER on IntegriCloud