summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath/ath9k/hw.h
Commit message (Collapse)AuthorAgeFilesLines
* ath9k: make PA linearization optional, disabled by default and fix checksFelix Fietkau2012-09-101-2/+1
| | | | | | | | | | | | | Some checks for PA linearization support checked ATH9K_HW_CAP_PAPRD and some used the EEPROM ops, leading to issues in tx power handling, since those two can be out of sync. Disable the feature by default, since it has been reported that it can cause damage to the rx path under some circumstances. It can now be enabled for testing via debugfs. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: fix PA linearization calibration related crashFelix Fietkau2012-09-051-0/+1
| | | | | | | | | | | Before PAPRD training can run, the card needs to have sent a packet for thermal calibration. Sending a dummy packet with the PAPRD training flag set causes a crash under some circumstance. Fix the code by replacing the dummy tx with a delay that waits for a real packet tx to have occurred. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Add PID/VID support for AR1111Mohammed Shafi Shajakhan2012-08-031-0/+1
| | | | | | | | | | | | | | | | AR1111 is same as AR9485. The h/w difference between them is quite insignificant, Felix suggests only very few baseband features may not be available in AR1111. The h/w code for AR9485 is already present, so AR1111 should work fine with the addition of its PID/VID. Cc: stable@vger.kernel.org [2.6.39+] Cc: Felix Bitterli <felixb@qca.qualcomm.com> Reported-by: Tim Bentley <Tim.Bentley@Gmail.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Tested-by: Tim Bentley <Tim.Bentley@Gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: Cleanup ath9k_hw_set_tsfadjustSujith Manoharan2012-07-171-1/+1
| | | | | Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: Add hardware code for WoWMohammed Shafi Shajakhan2012-07-121-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | add a new file wow.c which takes care of the hardware code for WoW. *program the descriptors and data words to periodically send Keep Alive Frames. *program the user defined patterns/masks and pattern length in the hardware registers. *'ath9k_hw_wow_enable' is called during the drivers suspend callback which takes care of the following - tracking wow event mask (to suppress spurious wow events) - properly configure suspend/resume WAR registers - configure PCIE PM control register - configure MAC WoW registers and their timeouts - enabling wow configuration like magic packet, user patterns based on users configuration - configuring timeouts for KAL, beacon miss, aifs, slot time, backoff - create Keep Alive Pattern ('KAL') *'ath9k_hw_wow_wakeup' is called during the drivers resume callback which takes care of the following - primary task is to find the reason for wakeup from the wow status register - configure/restore AR_PCIE_PM_CTRL register - clear all WoW events - configure/restore suspend/resume WAR registers Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Cc: vadivel@qca.qualcomm.com Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: INI changes for WoW for AR9002 chipsetsMohammed Shafi Shajakhan2012-07-121-0/+3
| | | | | | | | | | | | | | for AR9002 family of chipsets and for WoW sleep, we reprogram the SerDes so that the PLL and CHK REQ are both enabled. this uses more power but in certain cases this is required as otherwise WoW sleep is unstable and chip may disappear. Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Cc: vadivel@qca.qualcomm.com Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: Add WoW hardware capability flagsMohammed Shafi Shajakhan2012-07-121-0/+14
| | | | | | | | | | | | | | | | have seperate wow capability flags for *basic wow support *device capable of matching exact user defined pattern or de-authentication/disassoc pattern *device such AR9280 requires first four bytes for all sort of patterns Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Cc: vadivel@qca.qualcomm.com Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Add definitions and structures to support WoWMohammed Shafi Shajakhan2012-07-121-0/+34
| | | | | | | | | | | | | | | | | | | *add structures, macros and variables for WoW, so that the driver can make use of it. *maintain a list for user enabled patterns and masks *track pattern slots for the hardware limitation on the maximum number of patterns that can be stored. *track interrupts enabled before WoW suspend, so that can be reconfigured after resume *have macros to parse user defined wow configurations to hardware code Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Cc: vadivel@qca.qualcomm.com Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: add mode register initialization code for AR9550Gabor Juhos2012-07-091-0/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: define DEVID for QCA955xGabor Juhos2012-07-091-0/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: fix mci_is_enabled utilityRajkumar Manoharan2012-06-201-1/+2
| | | | | | | | | During driver stop, btcoex is disabled and also btcoex_hw.enabled is set to false. Afterwards mci_is_enabled returns false so that BT is not gaining SPDT control on WLAN sleep. Fix that. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: remove MIB interrupt supportFelix Fietkau2012-06-201-1/+0
| | | | | | | The new ANI implementation does not need it Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: remove the old ANI implementationFelix Fietkau2012-06-201-8/+1
| | | | | | | | | | It was found to be buggy on a variety of chipsets from AR913x to AR928x. The new version (which was introduced along with AR93xx support) is more reliable in preventing connectivity dropouts and also fixes MIB interrupt storm issues. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: configure ar9462 switching regulatorRajkumar Manoharan2012-06-061-1/+0
| | | | | | | | Enable WLAN and BT mode for switching regulator discontinuous orverride for AR9462 chips. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: Fix MCI usageSujith Manoharan2012-06-061-0/+9
| | | | | | | | | MCI has to be handled only when BTCOEX is actually enabled. Check for this condition before calling MCI related functions from various reset/calibration call-sites. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: Fix RTT calibrationSujith Manoharan2012-05-151-7/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes multiple issues with the current RTT implementation in ath9k. * The data that is obtained from the RTT interface registers are stored in 31:5 - mask out the extra bits when reading them. * A history buffer is maintained which is not needed at all. Remove this array and just store the baseband data for each chain (or bank). * A 'num_readings' variable was being used to handle the last entry. But it was being used in an improper manner, with the result that the RTT values were never being written to the RTT Interface registers. Fix this by using a simple flag. * Stop baseband operations before programming the calibration values to the HW. * Do not restore RX gain settings as part of RTT. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2012-05-071-1/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/intel/e1000e/param.c drivers/net/wireless/iwlwifi/iwl-agn-rx.c drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c drivers/net/wireless/iwlwifi/iwl-trans.h Resolved the iwlwifi conflict with mainline using 3-way diff posted by John Linville and Stephen Rothwell. In 'net' we added a bug fix to make iwlwifi report a more accurate skb->truesize but this conflicted with RX path changes that happened meanwhile in net-next. In e1000e a conflict arose in the validation code for settings of adapter->itr. 'net-next' had more sophisticated logic so that logic was used. Signed-off-by: David S. Miller <davem@davemloft.net>
| * ath9k: add an extra boolean parameter to ath9k_hw_apply_txpowerGabor Juhos2012-04-231-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to unifying regulatory limit handling commit ca2c68cc7bc80fc4504fb420df04cce99c9ee6ec (ath9k_hw: clean up tx power handling) introduced a new helper function 'ath9k_hw_apply_txpower', and the direct calls of 'ah->eep_ops->set_txpower' has been replaced by a call of the helper function. This caused a change in the behaviour of the 'ath9k_hw_set_txpowerlimit' function. The purpose of that function is to calculate and store the rate txpower table and the regulatory limit without touching the hardware registers. Before the commit, the 'test' parameter of the function was passed to the 'ah->eep_ops->set_txpower'. Now the calling of the 'set_txpower' function happens indirectly through 'ath9k_hw_apply_txpower', so the 'test' argument of the 'set_txpower' is always 'false'. This patch restores the original behaviour of 'ath9k_hw_set_txpowerlimit' by adding a new argument to 'ath9k_hw_apply_txpower.' Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k_hw: fix and clean up PHY activation delayFelix Fietkau2012-04-231-0/+2
| | | | | | | | | | | | | | | | | | The delay calculation is the same for all chips, however some parts of the code missed the extra delay factor for half/quarter. Clean up the code and move the delay calculation to a common place. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: Fix compile warnings when DEBUGFS is disabled.Ben Greear2012-04-231-1/+2
| | | | | | | | | | | | | | | | | | This fixes two compile warnings, and removes a useless cast when assigning the 'sc' variable. Reported-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: Gather and report IRQ sync_cause errors.Ben Greear2012-04-161-0/+6
| | | | | | | | | | | | | | | | | | | | | | Report all defined sync_cause errors in debugfs to aid with debugging. Use a macro to print out the interrupts file contents to decrease code duplication. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: remove dead codeZefir Kurtisi2012-04-121-10/+0
|/ | | | | | | | | Clean up some orphaned code lines containing * unused variables (not referenced / write-only) * non-implemented function prototypes Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: inline AR9271 1.0 INI overridesFelix Fietkau2012-03-151-1/+0
| | | | | | | Makes them more readable and reduces code size Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: remove iniModes_*_tx_gain_9271Felix Fietkau2012-03-151-2/+0
| | | | | | | Program tx gain through iniModesTxGain like on AR9287 Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: clean up iniModesAdditionalFelix Fietkau2012-03-151-2/+2
| | | | | | | | use iniModesFastClock for 5 ghz fast clock specific settings, and iniAdditional for clock/chip specific initval overrides Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: fold ar9002_hw_cck_chan14_spread into mode regs initializationFelix Fietkau2012-03-151-1/+0
| | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: remove iniCommon_*_cck_fir_coeff_9271Felix Fietkau2012-03-151-2/+0
| | | | | | | These arrays are unused Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: remove ath9k_hw_getdefantennaFelix Fietkau2012-03-151-1/+0
| | | | | | | The default antenna (as programmed by the INI file) is always 0 anyway. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: remove ath9k_hw_htc_resetinitFelix Fietkau2012-03-151-3/+0
| | | | | | | Automatically set the ah->htc_reset_init on init and after PHY disable. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: Cleanup FastChannelChangeSujith Manoharan2012-03-151-1/+1
| | | | | | | | | The logic to determine whether to use FCC is a bit convoluted. Use a small helper function to decide whether FCC is to be used. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'master' of ↵John W. Linville2012-02-291-1/+0
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
| * ath9k_hw: prevent writes to const data on AR9160Felix Fietkau2012-02-211-1/+0
| | | | | | | | | | | | | | | | | | | | | | Duplicate the data for iniAddac early on, to avoid having to do redundant memcpy calls later. While we're at it, make AR5416 < v2.2 use the same codepath. Fixes a reported crash on x86. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Magnus Määttä <magnus.maatta@logica.com> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: Remove ATH9K_HW_CAP_MCI checksSujith Manoharan2012-02-271-4/+0
| | | | | | | | | | | | | | | | With the ability to remove BTCOEX support at compile time, these checks are no longer needed. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: Remove ATH_BTCOEX_CFG_NONE checksSujith Manoharan2012-02-271-1/+1
| | | | | | | | | | | | | | | | Since BTCOEX code can be compiled out cleanly now, remove these checks. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k_hw: Use CONFIG_ATH9K_BTCOEX_SUPPORTSujith Manoharan2012-02-271-2/+19
| | | | | | | | | | | | | | | | | | Make use of CONFIG_ATH9K_BTCOEX_SUPPORT in ath9k_hw to provide a clean way of compilation without BTCOEX support. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k_hw: Cleanup MCI bits from hw.hSujith Manoharan2012-02-271-195/+0
| | | | | | | | | | | | | | | | This patch moves all the MCI-specific declarations that have been dumped unceremoniously in hw.h to ar9003_mci.h Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k_hw: Cleanup MCI bits from ath9k_hw_reset()Sujith Manoharan2012-02-271-0/+10
| | | | | | | | | | | | | | | | This patch moves all the MCI-specific code in the main reset function to helper functions. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k_hw: Setup MCI calibration using a helperSujith Manoharan2012-02-271-0/+2
| | | | | | | | | | Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k_hw: Handle MCI power state using a helperSujith Manoharan2012-02-271-0/+1
| | | | | | | | | | Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k_hw: Use a helper function to get MCI ISRSujith Manoharan2012-02-271-0/+1
|/ | | | | Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: increase tx status ring buffer sizeRajkumar Manoharan2012-01-041-1/+1
| | | | | | | | | | | | | AR9003 chips read tx status from ring buffer whose max number of status descriptor is mininal compared to max number of tx buffers. On a stress condition, it can be easily overflown which might cause false tx hung detection. Though increasing number of max status descriptors consumes more memory, it helps to avoid false positive chip resets. Cc: Paul Stewart <pstew@google.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: make bluetooth coexistence support optional at compile timeFelix Fietkau2011-12-191-0/+14
| | | | | | | | | | | | | | | | Many systems (e.g. embedded systems) do not have wifi modules connected to bluetooth modules, so bluetooth coexistence is irrelevant there. With the addition of MCI support, ath9k picked up quite a bit of extra code that can be compiled out this way. This patch redefines ATH9K_HW_CAP_MCI and adds an inline wrapper for querying the bluetooth coexistence scheme, allowing the compiler to eliminate code that uses it, with only very little use of #ifdef. On MIPS this reduces the total size for the modules by about 20k. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: remove ATH9K_HW_CAP_CSTMohammed Shafi Shajakhan2011-12-161-16/+15
| | | | | | | its not used anywhere in the current code Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: add DFS testing checkZefir Kurtisi2011-12-151-0/+1
| | | | | | | | | | | | In order to enable DFS upstream we want to be sure DFS has been tested for each chipset. Push for public documentation of the requirements we want in place and allow for enabling each chipset through a single upstream commit. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: sync to latest AR9462 INIMohammed Shafi Shajakhan2011-12-061-1/+0
| | | | | | | | | | | based on systems change to improve rx dynamic range, and enables heavy clip for 5G HT40 MCS0 to improve spectral mask power. also remove an unused function declaration Cc: Wilson Tsao <wtsao@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: Add MCI h/w code and state machineMohammed Shafi Shajakhan2011-11-301-0/+26
| | | | | | | | Cc: Wilson Tsao <wtsao@qca.qualcomm.com> Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: add GPIO output MUX related macrosMohammed Shafi Shajakhan2011-11-301-0/+10
| | | | | | | | Cc: Wilson Tsao <wtsao@qca.qualcomm.com> Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: add definitions to support MCI h/w codeMohammed Shafi Shajakhan2011-11-301-0/+146
| | | | | | | | | | | these definitions will be used by MCI state machine and the corresponding hardware code Cc: Wilson Tsao <wtsao@qca.qualcomm.com> Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: Cleanup btcoex wlan weightsRajkumar Manoharan2011-11-171-5/+0
| | | | | | | | | Remove all wlan weight macros and group it together for better understanding & readability. It makes the code reusable for AR9462 wlan weights. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Add btcoex profile management support for AR9462Rajkumar Manoharan2011-11-081-0/+11
| | | | | | | | | | | | | AR9462 chips have the capabilities to provoide bluetooth profile information. For non-AR9462 btcoex chips, the BT priority traffic was identified by periodically polling the respective registers and updated dutycycle, stomptype, etc. As AR9462 chip offers the BT profile informations, let us make use of that to update aggregation limit, dutycycle, stomptype and wieghtages. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
OpenPOWER on IntegriCloud