summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath/ath9k/htc.h
Commit message (Collapse)AuthorAgeFilesLines
...
* ath9k_htc: Add a debugfs file to dump TX slot informationSujith Manoharan2011-04-131-0/+1
| | | | | | | Location: ath9k_htc/phy#/slot Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Add support for TX completionSujith Manoharan2011-04-131-3/+11
| | | | | | | | Now that the infrastructure is in place, process WMI TX status events and complete packets. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Drain packets on station removalSujith Manoharan2011-04-131-0/+1
| | | | | | | | | | When a station entry is removed, there could still be pending packets destined for that station in the HIF layer. Sending these to the target is not necessary, so drain them in the driver itself. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Drain pending TX frames properlySujith Manoharan2011-04-131-2/+4
| | | | | | | | | | | | | | | | | When doing a channel set or a reset operation the pending frames queued up for transmission have to be flushed and sent to mac80211. Fixing this has to be done in two separate steps: * Flush queued frames and kill the URB TX completion handler. * Complete all the frames that in the TX pending queue. This patch adds proper support for draining and all the callsites namely, channel change/reset/idle/stop are fixed. A separate queue is used for handling failed frames. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Add TX slotsSujith Manoharan2011-04-131-1/+4
| | | | | | | | | | Maintain a bitmap of slots for transmission and update the cookie field for every packet with the slot value. This value would be used for matching packets when TX completion processing is added. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Move endpoint header parsing to TX taskletSujith Manoharan2011-04-131-0/+1
| | | | | | | | | There is no need to do endpoint header removal in the ISR. Also, this is needed when TX slot management is added later on. Use a helper function to strip the driver header. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Introduce new HTC APISujith Manoharan2011-04-131-0/+1
| | | | | | | | | | | | | | A new routine that takes an endpoint explicitly is introduced. The normal htc_send() now retrieves the endpoint from the packet's private data. This would be useful in TX completion when the endpoint ID would be required. While at it, use a helper function to map the queue to endpoint. Data/mgmt/beacon packets use htc_send(), while WMI comamnds pass the endpoint to HTC. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Fix TX queue managementSujith Manoharan2011-04-131-3/+10
| | | | | | | | | | | Handle queue start/stop properly by maintaining a counter to check if the pending frame count has exceeded the threshold. Otherwise, packets would be dropped needlessly. While at it, use a simple flag to track queue status and use helper functions too. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Sync MGMT/DATA packet headers with firmwareSujith Manoharan2011-04-131-2/+4
| | | | | | | | | Add a new cookie field that would be filled by the host. This can be used to match the TX status WMI event with the appropriate packet. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Move TX specific stuff to a separate structureSujith Manoharan2011-04-131-7/+12
| | | | | Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Sync struct ath9k_htc_cap_target with FWSujith Manoharan2011-04-131-0/+1
| | | | | Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Sync struct ath9k_htc_target_vif with FWSujith Manoharan2011-04-131-9/+3
| | | | | Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Sync struct ath9k_htc_target_sta with FWSujith Manoharan2011-04-131-26/+4
| | | | | Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Use SKB's private area for TX parametersSujith Manoharan2011-04-131-1/+13
| | | | | | | | | | | | | | For all packets sent through the USB_WLAN_TX_PIPE endpoint, the private area of the SKB's tx_info can be used to store driver-specific information. For packets sent through USB_REG_OUT_PIPE, this will not make a difference since they are routed through a separate routine that doesn't access the private region. This would help in situations where TX information is required in the URB callback. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Add RX error statisticsSujith Manoharan2011-04-131-0/+16
| | | | | Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Queue WMI eventsSujith Manoharan2011-04-131-1/+2
| | | | | | | | | | | | Use a queue to handle WMI events and schedule a tasklet to process the events. This fixes the race between the WMI event ISR and the SWBA tasklet when the arrival of WMI events in quick succession could overwrite the SWBA data before the tasklet from a previous iteration could have been scheduled. Also, drain the WMI queue properly. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Fix beacon miss under heavy loadSujith Manoharan2011-04-131-0/+7
| | | | | | | | | | | | Transmission of beacons becomes erratic when TX load is high, since the latency involved in the generation of a SWBA interrupt on the target to the actual sending of a beacon is quite high for USB devices. Fix this by adjusting the beacon response time. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Handle buffered frames in AP modeSujith Manoharan2011-04-131-1/+5
| | | | | | | | Use the CAB endpoint to send buffered multicast or broadcast frames after each SWBA event. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Add TSF adjust capabilitySujith Manoharan2011-04-131-0/+3
| | | | | | | | | | In multi-interface mode, beacons/probe responses that are sent out must have their timestamp field updated. Calculate the TSF adjustment value for each beaconing interface and set it in the frame properly. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Add beacon slotsSujith Manoharan2011-04-131-3/+10
| | | | | | | | Beacon transmission is now handled through a slot mechanism. This allows multiple beaconing interfaces to be be present. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Fix WMI and beacon headerSujith Manoharan2011-04-131-1/+1
| | | | | | | | | Match the beacon header with that of the firmware. Also, the firmware reports the TSF for an SWBA, so store it. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Add a WMI command to get the firmware versionSujith Manoharan2011-04-131-0/+3
| | | | | | | | Also, update the wiphy information and use the correct device pointer when registering. This would fix ethtool. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Fix LED pin for AR9287 HTC deviceRajkumar Manoharan2011-03-301-1/+1
| | | | | Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Handle BSSID/AID for multiple interfacesSujith Manoharan2011-03-011-0/+1
| | | | | | | | | | | The AID and BSSID should be set in the HW only for the first station interface or adhoc interface. Also, cancel the ANI timer in stop() for multi-STA scenario. And finally configure the HW beacon timers only for the first station interface. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Configure beacon timers in AP modeSujith Manoharan2011-02-231-2/+1
| | | | | | | | Handle multi-interface situations by checking if AP interfaces are already present. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Add ANI for AP modeSujith Manoharan2011-02-231-3/+6
| | | | | | | | The time granularity for the ANI task is different for AP and station mode. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Allow AP interface to be createdSujith Manoharan2011-02-231-0/+8
| | | | | Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Maintain individual counters for interfacesSujith Manoharan2011-02-231-0/+28
| | | | | | | | This is required for allowing only one IBSS interface to be configured. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Make sequence number calculation per-VIFSujith Manoharan2011-02-231-1/+1
| | | | | Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Set the BSSID mask for multiple interfacesSujith Manoharan2011-02-231-0/+5
| | | | | Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Remove OP_ASSOCIATED variableSujith Manoharan2011-02-231-6/+8
| | | | | | | | | | | | | | | | mac80211 stores the association state in ieee80211_bss_conf. Use this and remove the local state, which is incorrect anyway since it is stored globally and not on a per-VIF basis. Restarting ANI and reconfiguration of HW beacon timers when a scan run ends requires more work. This is handled by iterating over the active interfaces. Finally, remove the useless check for associated status in RX processing. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Remove OP_PROTECT_ENABLESujith Manoharan2011-02-231-6/+5
| | | | | | | CTS protection can be obtained from mac80211 directly. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Remove OP_PREAMBLE_SHORTSujith Manoharan2011-02-231-7/+6
| | | | | | | mac80211's BSS info can be used for this. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Allow upto two simultaneous interfacesSujith Manoharan2011-02-231-0/+7
| | | | | | | | | | | Multiple interfaces can be configured if a slot is free on the target. Monitor mode also requires a slot. The maximum number of stations that can be handled in the firmware is 8, manage the station slots accordingly. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: make use common of function to update txpowerRajkumar Manoharan2011-02-031-1/+0
| | | | | Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'master' of ↵John W. Linville2011-01-281-1/+1
|\ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: drivers/net/wireless/ath/ath9k/init.c
| * ath9k_htc: Fix endian issue in tx headerRajkumar Manoharan2011-01-171-1/+1
| | | | | | | | | | Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k_htc: keep calibrated noise floor value for oper channelRajkumar Manoharan2011-01-191-1/+1
|/ | | | | | | | | | | | The ath9k_hw assumes that caldata is valid only for oper channel. But with ath9k_htc case, the caldata is passed for all channels on hw_reset though we are not doing calibration on that channel. So the oper channel's nf history got cleared to default due to mismatch in channel flags. This patch also saves some space. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Really fix packet injectionSujith Manoharan2011-01-101-0/+1
| | | | | | | | | | The chainmask value along with other configuration has to be set on the target for packet injection. Fix this and also move the monitor interface addition before the channel set segment to ensure that the opmode is updated properly. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Move LED/RFKILL code to htc_drv_gpio.cSujith Manoharan2011-01-041-0/+5
| | | | | | | And add the copyright/license header. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Fix fast channel changeSujith Manoharan2011-01-041-10/+9
| | | | | | | | | | | When returning to the operating channel, a full HW reset has to be done instead of a fast channel change. Since sw_scan_complete() is called after the config() call for the home channel, we end up doing a FCC. Fix this issue by checking the OFFCHANNEL flag to determine FCC. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Handle FATAL eventsSujith Manoharan2011-01-041-1/+5
| | | | | | | | The device has to be reset when a FATAL event is received. Not doing so would leave the card in a non-working state. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Fix warning on device removalSujith Manoharan2010-12-221-3/+2
| | | | | | | | | | | | | The commit "ath9k_hw: warn if we cannot change the power to the chip" introduced a new warning to indicate chip powerup failures, but this is not required for devices that have been removed. Handle USB device removal properly by checking for unplugged status. For PCI devices, this warning will still be seen when the card is pulled out, not sure how to check for card removal. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'master' of ↵John W. Linville2010-12-081-0/+3
|\ | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: drivers/net/wireless/ath/ath9k/ath9k.h drivers/net/wireless/ath/ath9k/main.c drivers/net/wireless/ath/ath9k/xmit.c
| * ath9k_htc: Fix suspend/resumeSujith Manoharan2010-12-081-0/+3
| | | | | | | | | | | | | | | | | | The HW has to be set to FULLSLEEP mode during suspend, when no interface has been brought up. Not doing this would break resume, as the chip won't be powered up at all. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k_htc: Identify devices using driver_infoRajkumar Manoharan2010-11-241-1/+1
| | | | | | | | | | | | | | | | | | Categorize AR7010 & AR9287 devices based on driver_info of usb_device_id, instead of PIDs. This avoids per-device cases and minimize code changes for new device addition. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k_htc: Use macro for caldata array sizeMohammed Shafi Shajakhan2010-11-161-1/+1
|/ | | | | | | | The calibration data variable size is based on the number of channels available in the ath9k driver. Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Add support for bluetooth coexistence.Vivek Natarajan2010-08-241-12/+30
| | | | | Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: clean up per-channel calibration dataFelix Fietkau2010-08-041-0/+2
| | | | | | | | | | | | | | | | | | | | | | | The noise floor history buffer is currently not kept per channel, which can lead to problems when changing channels from a clean channel to a noisy one. Also when switching from HT20 to HT40, the noise floor history buffer is full of measurements, but none of them contain data for the extension channel, which it needs quite a bit of time to recover from. This patch puts all the per-channel calibration data into a single data structure, and gives the the driver control over whether that is used per-channel or even not used for some channels. For ath9k_htc, I decided to keep this per-channel in order to avoid creating regressions. For ath9k, the data is kept only for the operating channel, which saves some space. ath9k_hw takes care of wiping old data when the operating channel or its channel flags change. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Add LED support for AR7010Sujith2010-06-301-0/+1
| | | | | Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
OpenPOWER on IntegriCloud