summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath/ath9k/ath9k.h
Commit message (Collapse)AuthorAgeFilesLines
...
* ath9k: Implement op_flush()Vasanthakumar Thiagarajan2011-02-211-0/+1
| | | | | | | | | | When op_flush() is called with no drop (drop=false), the driver tries to tx as many frames as possible in about 100ms on every hw queue. During this time period frames from sw queue are also scheduled on to respective hw queue. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6John W. Linville2011-02-181-7/+1
|\ | | | | | | | | | | Conflicts: drivers/bluetooth/ath3k.c drivers/bluetooth/btusb.c
| * ath9k: Fix ath9k prevents CPU to enter C3 statesMohammed Shafi Shajakhan2011-02-151-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DMA latency issue is observed only in Intel pinetrail platforms but in the driver we had a default PM-QOS value of 55. This caused unnecessary power consumption and battery drain in other platforms. Remove the pm-qos thing in the driver code and address the throughput issue in Intel pinetrail platfroms in user space using any one of the scripts in below links: http://www.kernel.org/pub/linux/kernel/people/mcgrof/scripts/cpudmalatency.c http://johannes.sipsolutions.net/files/netlatency.c.txt More details can be found in the following bugzilla link: https://bugzilla.kernel.org/show_bug.cgi?id=27532 This reverts the following commits: 98c316e348bedffa730e6f1e4baeb8a3c3e0f28b 4dc3530df7c0428b41c00399a7ee8c929406d181 10598c124ecabbbfd7522f74de19b8f7d52a1bee Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: Fix possible double free of PAPRD skb'sMohammed Shafi Shajakhan2011-02-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch reverts the following commit ath9k: remove bfs_paprd_timestamp from struct ath_buf_state Under high interference/noisy environment conditions where PAPRD frames fails heavily introduces a possibility of double freeing skb's and causes kernel panic after some time.This patch reverts back to the original approach of using paprd_timestamp before freeing the PAPRD frame skb's [ 194.193705] Pid: 0, comm: swapper Tainted: G D WC 2.6.35-22-generic #33-Ubuntu [ 194.193712] Call Trace: [ 194.193722] [<c05c6468>] ? printk+0x2d/0x35 [ 194.193732] [<c05c63c3>] panic+0x5a/0xd2 [ 194.193741] [<c05ca3ed>] oops_end+0xcd/0xd0 [ 194.193750] [<c0105f74>] die+0x54/0x80 [ 194.193758] [<c05c9a16>] do_trap+0x96/0xc0 [ 194.193837] [<c0103fb0>] ? do_invalid_op+0x0/0xa0 [ 194.193846] [<c010403b>] do_invalid_op+0x8b/0xa0 [ 194.193856] [<c020bd4c>] ? kfree+0xec/0xf0 [ 194.193866] [<c012ce18>] ? default_spin_lock_flags+0x8/0x10 [ 194.193877] [<c01de47a>] ? free_one_page+0x12a/0x2d0 [ 194.193888] [<c01e04dc>] ? __free_pages+0x1c/0x40 [ 194.193897] [<c05c97a7>] error_code+0x73/0x78 [ 194.193906] [<c020bd4c>] ? kfree+0xec/0xf0 [ 194.193915] [<c04ecdd0>] ? skb_release_data+0x70/0xa0 [ 194.193924] [<c04ecdd0>] skb_release_data+0x70/0xa0 [ 194.193933] [<c04ec997>] __kfree_skb+0x17/0x90 [ 194.193941] [<c04eca31>] consume_skb+0x21/0x40 [ 194.193964] [<f85e0b70>] ieee80211_tx_status+0x760/0x860 [mac80211] [ 194.193979] [<f85caddf>] ath_tx_complete_buf+0x1bf/0x2c0 [ath9k] [ 194.193988] [<c05c8b9f>] ? _raw_spin_lock_irqsave+0x2f/0x50 [ 194.193997] [<c04ec40e>] ? skb_queue_tail+0x3e/0x50 [ 194.194010] [<f85cc803>] ath_tx_complete_aggr+0x823/0x940 [ath9k] [ 194.194021] [<c0108a28>] ? sched_clock+0x8/0x10 [ 194.194030] [<c016bf14>] ? sched_clock_local+0xa4/0x180 [ 194.194040] [<c0139f57>] ? enqueue_sleeper+0x1e7/0x2b0 [ 194.194051] [<c013a194>] ? enqueue_entity+0x174/0x200 [ 194.194064] [<f85ce83d>] ath_tx_edma_tasklet+0x2bd/0x3b0 [ath9k] [ 194.194074] [<c05c8b9f>] ? _raw_spin_lock_irqsave+0x2f/0x50 [ 194.194088] [<f85c7b9f>] ath9k_tasklet+0x9f/0x190 [ath9k] [ 194.194097] [<c01505d7>] tasklet_action+0xa7/0xb0 [ 194.194107] [<c015127c>] __do_softirq+0x9c/0x1b0 [ 194.194117] [<c01a7f64>] ? irq_to_desc+0x14/0x20 [ 194.194126] [<c0124fc4>] ? ack_apic_level+0x64/0x1f0 [ 194.194136] [<c01513d5>] do_softirq+0x45/0x50 [ 194.194145] [<c0151545>] irq_exit+0x65/0x70 [ 194.194153] [<c05cf665>] do_IRQ+0x55/0xc0 [ 194.194162] [<c016a6c7>] ? hrtimer_start+0x27/0x30 [ 194.194171] [<c0103630>] common_interrupt+0x30/0x38 [ 194.194181] [<c012c21a>] ? native_safe_halt+0xa/0x10 [ 194.194268] [<c010a2f9>] default_idle+0x49/0xb0 [ 194.194277] [<c0101fcc>] cpu_idle+0x8c/0xd0 [ 194.194286] [<c05b2431>] rest_init+0x71/0x80 [ 194.194295] [<c081981a>] start_kernel+0x36e/0x374 [ 194.194305] [<c08199dd>] ? pass_all_bootoptions+0x0/0xa [ 194.194314] [<c08190d7>] i386_start_kernel+0xd7/0xdf [ 194.194364] panic occurred, switching back to text console Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: disable beaconing before stopping beacon queueRajkumar Manoharan2011-02-141-0/+2
| | | | | | | | | | | | | | | | | | | | Beaconing should be disabled before stopping beacon queue. Not doing so could queue up beacons in hw that causes failure to stop Tx DMA, due to pending frames in hw and also unnecessary beacon tasklet schedule. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: Remove redundant beacon_intervalSteve Brown2011-02-091-3/+1
| | | | | | | | | | | | | | | | | | | | The variable appears in both ath_softc and ath_beacon_config. The struct ath_beacon_config is embedded in ath_softc. The redundant variable was added by commit id 57c4d7b4c4986037be51476b8e3025d5ba18d8b8. Signed-off-by: Steve Brown <sbrown@cortland.com> Reviewed-by: Mohammed Shafi <shafi.ath9k@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: add additional checks for the baseband hang detectionFelix Fietkau2011-02-041-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Since even with the latest changes the false positive issue of the baseband hang check is not fully solved yet, additional checks are needed. If the baseband hang occurs, the rx_clear signal will be stuck to high, so we can use the cycle counters to confirm it. With this patch, a hardware reset is only triggered if the baseband hang check returned true three times in a row, with a beacon interval between each check and if the busy time was also 99% or more during the check intervals. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: use common API to avoid code duplicationRajkumar Manoharan2011-01-281-2/+0
| | | | | | | | | | Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: Fix a PLL hang issue observed with AR9485.Vivek Natarajan2011-01-281-0/+1
| | | | | | | | | | | | | | | | | | | | When this PLL hang issue is seen, both Rx and Tx fail to work. The sqsum_dvc needs to be below 2000 for a good chip. During this issue the sqsum_dvc value is beyond 80000 and only a full reset can solve this problem. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: use split rx buffers to get rid of order-1 skb allocationsFelix Fietkau2011-01-281-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | With this change, less CPU time is spent trying to look for consecutive pages for rx skbs. This also reduces the socket memory required for IP/UDP reassembly. Only two buffers per frame are supported. Frames spanning more buffers will be dropped, but the buffer size is enough to handle the required AMSDU size. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: Remove unused IEEE80211_WEP_NKIDBruno Randolf2011-01-281-1/+0
| | | | | | | | | | | | | | | | IEEE80211_WEP_NKID is not used in ath9k any more since the key handling code has been moved to ath/. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: fold struct ath_wiphy into struct ath_softcFelix Fietkau2011-01-281-9/+4
| | | | | | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: remove the bf->aphy fieldFelix Fietkau2011-01-281-2/+1
| | | | | | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: remove support for virtual wiphysFelix Fietkau2011-01-281-41/+0
| | | | | | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: clean up enums and unused macrosMohammed Shafi Shajakhan2011-01-261-4/+3
| | | | | | | | | | | | | | Remove unused macros and cleanup buffer_type enumeration Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: Restart xmit logic in xmit watchdog.Ben Greear2011-01-211-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The system can get into a state where the xmit queue is stopped, but there are no packets pending, so the queue will not be restarted. Add logic to the xmit watchdog to attempt to restart the xmit logic if this situation is detected. Example 'dmesg' output: ath: txq: f4e723e0 axq_qnum: 2, mac80211_qnum: 2 axq_link: f4e996c8 pending frames: 1 axq_acq empty: 1 stopped: 0 axq_depth: 0 Attempting to restart tx logic. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: Keep track of stations for debugfs.Ben Greear2011-01-211-1/+6
| | | | | | | | | | | | | | | | | | | | The stations hold the ath_node, which holds the tid and other xmit logic structures. In order to debug stuck xmit logic, we need a way to print out the tid state for the stations. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: Remove un-used member from ath_node.Ben Greear2011-01-211-1/+0
| | | | | | | | | | Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: Fix up hardware mode and beacons with multiple vifs.Ben Greear2011-01-191-2/+21
|/ | | | | | | | | | | | | | | | | | When using a mixture of AP and Station interfaces, the hardware mode was using the type of the last VIF registered. Instead, we should keep track of the number of different types of vifs and set the mode accordingly. In addtion, use the vif type instead of hardware opmode when dealing with beacons. Attempt to move some of the common setup code into smaller methods so we can re-use it when changing vif mode as well as adding/deleting vifs. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: qualify global modparam_nohwcrypt variableJohn W. Linville2011-01-051-1/+1
| | | | Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Reset keycache on resumeMohammed Shafi Shajakhan2010-12-221-0/+1
| | | | | | | | | | | | | | It looks like some hardware registers are left into undefined state after suspend/resume. At minimum, this can cause odd issues related to key cache and hardware trying to encrypt/decrypt frames unexpectedly. This seems to happen even when there is no keys configured, i.e., hardware can end up touching TX frames just based of invalid key cache context even if the driver is not asking a specific entry to be used. In addition, RX can likely be affected. This patch fixes this issue. Signed-off-by: Jouni Malinen <Jouni.Malinen@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Fix warnings on card removalRajkumar Manoharan2010-12-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The recently added warning message on power change failure is not needed on device removal. ath: Failed to wakeup in 500us ------------[ cut here ]------------ WARNING: at drivers/net/wireless/ath/ath9k/hw.c:1618 ath9k_hw_setpower+0x61f/0x630 [ath9k_hw]() Hardware name: 64756D6 Pid: 540, comm: kworker/u:3 Not tainted 2.6.37-rc6-wl #37 Call Trace: [<ffffffff810501aa>] warn_slowpath_common+0x7a/0xb0 [<ffffffffa056e280>] ? ath9k_iowrite32+0x0/0x90 [ath9k] [<ffffffff810501f5>] warn_slowpath_null+0x15/0x20 [<ffffffffa05226ef>] ath9k_hw_setpower+0x61f/0x630 [ath9k_hw] [<ffffffffa05700e5>] ath9k_ps_wakeup+0x85/0xd0 [ath9k] [<ffffffffa0570685>] ath9k_configure_filter+0x25/0x80 [ath9k] [<ffffffffa04dde43>] ieee80211_configure_filter+0x133/0x190 [mac80211] [<ffffffffa04ee502>] ieee80211_do_stop+0x132/0x540 [mac80211] [<ffffffff813466ff>] ? _raw_spin_unlock_bh+0x1f/0x30 [<ffffffff812b6923>] ? dev_deactivate+0x1c3/0x1e0 [<ffffffffa04ee925>] ieee80211_stop+0x15/0x20 [mac80211] [<ffffffff8129d1b6>] __dev_close+0x56/0x90 Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: do not limit the chainmask to 1 for legacy modeFelix Fietkau2010-12-201-1/+0
| | | | | | | | | | Restricting the chainmask to 1 for legacy mode disables useful features such as MRC, and it reduces the available transmit power. I can't think of a good reason to do this in legacy mode, so let's just get rid of that code. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: fix queue depth check for forming new aggregatesFelix Fietkau2010-12-201-0/+1
| | | | | | | | | | | | | | To improve aggregation length, there should not be more than two fully formed A-MPDU frames in the hardware queue. To ensure this, the code checks the tx queue length before forming new A-MPDUs. This can reduce the throughput (or maybe even starve out A-MPDU traffic) when too many non-aggregated frames are in the queue. Fix this by keeping track of pending A-MPDU frames (even when they're sent out as single frames), but exclude rate control probing frames to improve performance. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Make PM-QOS value as user configurableMohammed Shafi Shajakhan2010-12-151-0/+3
| | | | | | | | | | | | | | | This patch allows the pm-qos value to be user configurable by making it as a module parameter.This will help our customers to configure the pm-qos value according to the effect in throughput due to the DMA latency problem which was observed in Intel Pinetrail platforms. The tested value of '55' will be filled as the default pm-qos-value incase the user does not specifies pm-qos value as a module parameter. example usage: sudo modprobe ath9k pmqos=65 Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'master' of ↵John W. Linville2010-12-081-1/+1
|\ | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: drivers/net/wireless/ath/ath9k/ath9k.h drivers/net/wireless/ath/ath9k/main.c drivers/net/wireless/ath/ath9k/xmit.c
| * ath9k: fix a DMA related race condition on resetFelix Fietkau2010-12-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | When ath_drain_all_txq fails to stop DMA, it issues a hw reset. This reset happens at a very problematic point in time, when the hardware rx path has not been stopped yet. This could lead to memory corruption, hardware hangs or other issues. To fix these issues, simply remove the reset entirely and check the tx DMA stop status to prevent problems with fast channel changes. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | Merge branch 'master' of ↵John W. Linville2010-12-021-1/+3
|\| | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
| * ath9k: use per-device struct for pm_qos_* operationsGabor Juhos2010-11-291-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ath9k driver uses a shared pm_qos_request_list structure for all devices. This causes the following warning if more than one device is present in the system: WARNING: at kernel/pm_qos_params.c:234 ath9k_init_device+0x5e8/0x6b0() pm_qos_add_request() called for already added request Modules linked in: Call Trace: [<802b1cdc>] dump_stack+0x8/0x34 [<8007dd90>] warn_slowpath_common+0x78/0xa4 [<8007de44>] warn_slowpath_fmt+0x2c/0x38 [<801b0828>] ath9k_init_device+0x5e8/0x6b0 [<801bc508>] ath_pci_probe+0x2dc/0x39c [<80176254>] pci_device_probe+0x64/0xa4 [<8019471c>] driver_probe_device+0xbc/0x188 [<80194854>] __driver_attach+0x6c/0xa4 [<80193e20>] bus_for_each_dev+0x60/0xb0 [<80193580>] bus_add_driver+0xcc/0x268 [<80194c08>] driver_register+0xe0/0x198 [<801764e0>] __pci_register_driver+0x50/0xe0 [<80365f48>] ath9k_init+0x3c/0x6c [<8006050c>] do_one_initcall+0xfc/0x1d8 [<80355340>] kernel_init+0xd4/0x174 [<800639a4>] kernel_thread_helper+0x10/0x18 ---[ end trace 5345fc6f870564a6 ]--- This patch fixes that warning by using a separate pm_qos_request_list sructure for each device. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: Add support for Adaptive Power ManagementMohammed Shafi Shajakhan2010-11-301-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This feature is to mitigate the problem of certain 3 stream chips that exceed the PCIe power requirements.An EEPROM flag controls which chips have APM enabled which is basically read from miscellaneous configuration element of the EEPROM header. This workaround will reduce power consumption by using 2 Tx chains for Single and Double stream rates (5 GHz only).All self generated frames (regardless of rate) are sent on 2 chains when this feature is enabled(Chip Limitation). Cc: Paul Shaw <paul.shaw@atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Tested-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | Merge branch 'master' of ↵John W. Linville2010-11-241-0/+1
|\| | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
| * ath9k: Fix a DMA latency issue for Intel Pinetrail platforms.Vivek Natarajan2010-11-081-0/+1
| | | | | | | | | | | | | | | | | | | | Throughput was severely affected in Intel Pinetrail platforms because of a DMA problem in C3 state. This patch fixes this issue. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> CC: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: store frame information used by aggregation inside the skb tx infoFelix Fietkau2010-11-171-6/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the pointers after the rates in the tx info cannot be used anymore after frames have been queued, this area can be used to store information that was previously stored in the ath_buf. With these changes, we can delay the ath_buf assignment in the aggregation code until aggregates are formed. That will not only make it possible to simplify DMA descriptor setup to do less rewriting of uncached memory, but will also make it easier to move aggregation out of the core of the ath9k tx path. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: more tx setup cleanupsFelix Fietkau2010-11-171-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | - remove the BUF_HT flag, and instead check for IEEE80211_TX_CTL_AMPDU before calling ath_tx_send_ampdu. - remove a few unused variables - calculate frame length before adding the frame padding - merge the misnamed ath_tx_start_dma function into ath_tx_start - remove an unused argument for assign_aggr_tid_seqno Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: clean up code duplication around ath_tx_startFelix Fietkau2010-11-171-1/+0
| | | | | | | | | | | | | | | | Merge initial processing for the CAB queue and regular tx. Also move ath_tx_cabq() to beacon.c and make it static. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: remove bf_tx_aborted from struct ath_bufFelix Fietkau2010-11-171-1/+0
| | | | | | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: remove bfs_frmlen from struct ath_buf_stateFelix Fietkau2010-11-171-2/+0
| | | | | | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: remove bfs_nframes from struct ath_buf_stateFelix Fietkau2010-11-171-2/+0
| | | | | | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: remove bfs_al from struct ath_buf_stateFelix Fietkau2010-11-171-3/+1
| | | | | | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: remove bfs_keyix from struct ath_buf_stateFelix Fietkau2010-11-171-2/+0
| | | | | | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: remove bfs_paprd_timestamp from struct ath_buf_stateFelix Fietkau2010-11-171-1/+1
| | | | | | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: remove bfs_keytype from struct ath_buf_stateFelix Fietkau2010-11-171-2/+0
| | | | | | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: remove bfs_tidno from struct ath_buf_stateFelix Fietkau2010-11-171-2/+0
| | | | | | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: remove bfs_seqno from struct ath_buf_stateFelix Fietkau2010-11-171-2/+0
| | | | | | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: remove the tx info padding byte abuseFelix Fietkau2010-11-161-1/+2
| | | | | | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: Fix bug in delimiter padding computationVasanthakumar Thiagarajan2010-11-161-2/+2
| | | | | | | | | | | | | | | | | | | | There is a roundng error in delimiter padding computation which causes severe throughput drop with some of AR9003. signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Cc:stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: rework tx queue selection and fix queue stopping/wakingFelix Fietkau2010-11-151-6/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current ath9k tx queue handling code showed a few issues that could lead to locking issues, tx stalls due to stopped queues, and maybe even DMA issues. The main source of these issues is that in some places the queue is selected via skb queue mapping in places where this mapping may no longer be valid. One such place is when data frames are transmitted via the CAB queue (for powersave buffered frames). This is made even worse by a lookup WMM AC values from the assigned tx queue (which is undefined for the CAB queue). This messed up the pending frame counting, which in turn caused issues with queues getting stopped, but not woken again. To fix these issues, this patch removes an unnecessary abstraction separating a driver internal queue number from the skb queue number (not to be confused with the hardware queue number). It seems that this abstraction may have been necessary because of tx queue preinitialization from the initvals. This patch avoids breakage here by pushing the software <-> hardware queue mapping to the function that assigns the tx queues and redefining the WMM AC definitions to match the numbers used by mac80211 (also affects ath9k_htc). To ensure consistency wrt. pending frame count tracking, these counters are moved to the ath_txq struct, updated with the txq lock held, but only where the tx queue selected by the skb queue map actually matches the tx queue used by the driver for the frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: move the PCU lock to the sc structureLuis R. Rodriguez2010-11-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PCU lock should be used to contend TX DMA as well, this will be done next. This is part of a series of patches which fix stopping TX DMA completley when requested on the driver. For more details about this issue refer to this thread: http://marc.info/?l=linux-wireless&m=128629803703756&w=2 Tested-by: Ben Greear <greearb@candelatech.com> Cc: Kyungwan Nam <kyungwan.nam@atheros.com> Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: simplify hw reset lockingLuis R. Rodriguez2010-11-151-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The new PCU lock is better placed so we can just contend against that when trying to reset hardware. This is part of a series of patches which fix stopping TX DMA completley when requested on the driver. For more details about this issue refer to this thread: http://marc.info/?l=linux-wireless&m=128629803703756&w=2 Tested-by: Ben Greear <greearb@candelatech.com> Cc: Kyungwan Nam <kyungwan.nam@atheros.com> Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: optimize/fix ANI RSSI processingFelix Fietkau2010-11-091-1/+1
|/ | | | | | | | | | | | ANI needs the RSSI average only in station mode, and only for tracking the signal strength of beacons of the AP that it is connected to. Adjust the code to track on the beacon RSSI, and store the average of that in the ath_wiphy struct. With these changes, we can get rid of this extra station lookup in the rx path, which saves precious CPU cycles. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
OpenPOWER on IntegriCloud