summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
Commit message (Collapse)AuthorAgeFilesLines
...
* {NET, IB}/mlx4: Add device managed flow steering firmware APIHadar Hen Zion2012-07-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver is modified to support three operation modes. If supported by firmware use the device managed flow steering API, that which we call device managed steering mode. Else, if the firmware supports the B0 steering mode use it, and finally, if none of the above, use the A0 steering mode. When the steering mode is device managed, the code is modified such that L2 based rules set by the mlx4_en driver for Ethernet unicast and multicast, and the IB stack multicast attach calls done through the mlx4_ib driver are all routed to use the device managed API. When attaching rule using device managed flow steering API, the firmware returns a 64 bit registration id, which is to be provided during detach. Currently the firmware is always programmed during HCA initialization to use standard L2 hashing. Future work should be done to allow configuring the flow-steering hash function with common, non proprietary means. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_en: Re-design multicast attachments flowYevgeny Petrilin2012-07-071-2/+14
| | | | | | | | | | | | | | | | | | | Currently, for every change in the net device multicast list, the driver detaches all the addresses from the HW device, and then attaches the updated list. This behavior is wrong from two aspects: first, it causes a load of firmware commands and second, there is period of time where the correct addresses are not attached, which turned into packet loss. To improve - a copy of the multicast list is saved by the driver. For every change in the multicast list, the multicast list copy is used to find the delta between those two lists and add or remove multicast addresses as needed. Reported-by: Shawn Bohrer <sbohrer@rgmadvisors.com> Cc: Shawn Bohrer <sbohrer@rgmadvisors.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_en: Release QP range in free_resourcesYevgeny Petrilin2012-06-251-0/+1
| | | | | | | | | Add a missing resource release in ring cleanup. Not doing this leaves a range of QPs that are being reserved, and no one can use them. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_en: num cores tx rings for every UPAmir Vadai2012-05-171-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | Change the TX ring scheme such that the number of rings for untagged packets and for tagged packets (per each of the vlan priorities) is the same, unlike the current situation where for tagged traffic there's one ring per priority and for untagged rings as the number of core. Queue selection is done as follows: If the mqprio qdisc is operates on the interface, such that the core networking code invoked the device setup_tc ndo callback, a mapping of skb->priority => queue set is forced - for both, tagged and untagged traffic. Else, the egress map skb->priority => User priority is used for tagged traffic, and all untagged traffic is sent through tx rings of UP 0. The patch follows the convergence of discussing that issue with John Fastabend over this thread http://comments.gmane.org/gmane.linux.network/229877 Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Liran Liss <liranl@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx4_en: Byte Queue Limit supportYevgeny Petrilin2012-04-231-0/+2
| | | | | Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx4_en: Moving to Interrupts for TX completionsYevgeny Petrilin2012-04-231-5/+1
| | | | | | | | | | | | | | Moving to interrupts instead of polling fpr TX completions Avoiding situations where skb can be held in by the driver for a long time (till timer expires). The change is also necessary for supporting BQL. Removing comp_lock that was required because we could handle TX completions from several contexts: Interrupts, timer, polling. Now there is only interrupts Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2012-04-101-2/+3
|\
| * mlx4: allocate just enough pages instead of always 4 pagesThadeu Lima de Souza Cascardo2012-04-041-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver uses a 2-order allocation, which is too much on architectures like ppc64, which has a 64KiB page. This particular allocation is used for large packet fragments that may have a size of 512, 1024, 4096 or fill the whole allocation. So, a minimum size of 16384 is good enough and will be the same size that is used in architectures of 4KiB sized pages. This will avoid allocation failures that we see when the system is under stress, but still has plenty of memory, like the one below. This will also allow us to set the interface MTU to higher values like 9000, which was not possible on ppc64 without this patch. Node 1 DMA: 737*64kB 37*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB 0*8192kB 0*16384kB = 51904kB 83137 total pagecache pages 0 pages in swap cache Swap cache stats: add 0, delete 0, find 0/0 Free swap = 10420096kB Total swap = 10420096kB 107776 pages RAM 1184 pages reserved 147343 pages shared 28152 pages non-shared netstat: page allocation failure. order:2, mode:0x4020 Call Trace: [c0000001a4fa3770] [c000000000012f04] .show_stack+0x74/0x1c0 (unreliable) [c0000001a4fa3820] [c00000000016af38] .__alloc_pages_nodemask+0x618/0x930 [c0000001a4fa39a0] [c0000000001a71a0] .alloc_pages_current+0xb0/0x170 [c0000001a4fa3a40] [d00000000dcc3e00] .mlx4_en_alloc_frag+0x200/0x240 [mlx4_en] [c0000001a4fa3b10] [d00000000dcc3f8c] .mlx4_en_complete_rx_desc+0x14c/0x250 [mlx4_en] [c0000001a4fa3be0] [d00000000dcc4eec] .mlx4_en_process_rx_cq+0x62c/0x850 [mlx4_en] [c0000001a4fa3d20] [d00000000dcc5150] .mlx4_en_poll_rx_cq+0x40/0x90 [mlx4_en] [c0000001a4fa3dc0] [c0000000004e2bb8] .net_rx_action+0x178/0x450 [c0000001a4fa3eb0] [c00000000009c9b8] .__do_softirq+0x118/0x290 [c0000001a4fa3f90] [c000000000031df8] .call_do_softirq+0x14/0x24 [c000000184c3b520] [c00000000000e700] .do_softirq+0xf0/0x110 [c000000184c3b5c0] [c00000000009c6d4] .irq_exit+0xb4/0xc0 [c000000184c3b640] [c00000000000e964] .do_IRQ+0x144/0x230 Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Tested-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx4_en: Set max rate-limit for a TCAmir Vadai2012-04-051-0/+1
| | | | | | | | | | | | | | | | This patch is using the DCB netlink to set rate limit per ETS TC Values are accepted in Kbps and rounded up to the nearest multiply of 100Mbps. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx4_en: DCB QoS supportAmir Vadai2012-04-051-0/+21
| | | | | | | | | | | | | | Set TSA, promised BW and PFC using IEEE 802.1qaz netlink commands. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx4_en: Force user priority by QP attributeAmir Vadai2012-04-051-3/+3
|/ | | | | | | | | | | | | | | | | | | Instead of relying on HW to change schedule queue by UP, schedule queue is fixed for a tx_ring, and UP in WQE is ignored in this aspect. This resolves two issues with untagged traffic: 1. untagged traffic has no UP in packet which is needed for QoS. The change above allows setting the schedule queue (and by that the UP) of such a stream. 2. BlueFlame uses the same field used by vlan tag. So forcing UP from QPC allows using BF for untagged but prioritized traffic. In old firmware that force UP is not supported, untagged traffic will not subject to QoS. Because UP is set by QP, need to always have a tx ring per UP, even if pfcrx module paramter is false. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4: fixing sparse warnings for not declared, functionsYevgeny Petrilin2012-03-061-4/+0
| | | | | | | | | | The SET_PORT functions are implemented in port.c, which is part of mlx4_core, these functions are exported. The functions are in use by the mlx4_en module (were originally part of mlx4_en). Their declaration remained in mlx4_en module, moving the declaration to the right location. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4: fix sparse warnings on TX control flags, endianessOr Gerlitz2012-03-061-1/+1
| | | | | | | | | Fix sparse warnings on incompatibility between the endianess of the ctrl_flags field of struct mlx4_en_priv to the srcrb_flags field of struct mlx4_wqe_ctrl_seg by changing the former to be __be32 instead of u32. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_en: Saving mem access on data pathYevgeny Petrilin2012-03-061-0/+1
| | | | | | | | | | | | | | Localized the pdev->dev, and using dma_map instead of pci_map There are multiple map/unmap operations on data path, optimizing those by saving redundant pointer access. Those places were identified as hot-spots when running kernel profiling during some benchmarks. The fixes had most impact when testing packet rate with small packets, reducing several % from CPU load, and in some case being the difference between reaching wire speed or being CPU bound. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx4: allow device removal by fixing dma unmap sizeThadeu Lima de Souza Cascardo2012-02-061-1/+2
| | | | | | | | | | | | | | | | | After opening the network interface, Mellanox ConnectX device cannot be removed by hotplug because it has not properly unmapped all DMA memory. It happens that mlx4_en_activate_rx_rings overrides the variable that keeps the size of the memory mapped. This is fixed by passing to mlx4_en_destroy_rx_ring the same size that is given to mlx4_en_create_rx_ring. After applying this patch, hot unplugging the device works after opening the interface. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx4_en: eth statistics modificationEugenia Emantayev2012-01-221-0/+1
| | | | | | | | | | | In native mode display all available staticstics. In SRIOV mode on VF display only SW counters statistics, in SRIOV mode on hypervisor display SW counters and errors (got from FW) statistics. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Reviewed-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx4_en: set number of rx rings used by RSS using ethtoolYevgeny Petrilin2012-01-181-1/+1
| | | | | | | | | Value must be a power of 2 due to HW limitation. Driver supports only 'equal' mode in ethtool and can't be set by using weights. Signed-off-by: Amir Vadai <amirv@mellanox.co.il> Reviewed-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx4_en: updated driver version to 2.0Yevgeny Petrilin2011-12-131-2/+2
| | | | | Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_en: adding loopback supportAmir Vadai2011-11-271-0/+1
| | | | | | | | Device must be in promiscuous mode or DMAC must be same as the host MAC, or else packet will be dropped by the HW rx filtering. Signed-off-by: Amir Vadai <amirv@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_en: fix sparse warning on a cast which truncates bits from constant ↵Or Gerlitz2011-11-271-1/+1
| | | | | | | | | | | | value the MLX4_EN_WOL_DO_MODIFY flag which is defined through enum targets bit 63, this triggers a "cast truncate bits from constant value (8000000000000000 becomes 0)" warning from sparse, fix that by using define instead of enum. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4: move RSS related definitions to be globalOr Gerlitz2011-11-271-10/+0
| | | | | | | | | | Towards adding RSS support for IB drivers/application who use the mlx4 HW, make the RSS related definitions global and change the mlx4_en driver to use them. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx4_en: Remove FCS bytes from packet length.Yevgeny Petrilin2011-11-141-0/+1
| | | | | | | | When HW doesn't remove FCS bytes they are reported in the completion byte count, we don't need to take them to skb. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* treewide: use __printf not __attribute__((format(printf,...)))Joe Perches2011-10-311-1/+2
| | | | | | | | | | | | | | | | | Standardize the style for compiler based printf format verification. Standardized the location of __printf too. Done via script and a little typing. $ grep -rPl --include=*.[ch] -w "__attribute__" * | \ grep -vP "^(tools|scripts|include/linux/compiler-gcc.h)" | \ xargs perl -n -i -e 'local $/; while (<>) { s/\b__attribute__\s*\(\s*\(\s*format\s*\(\s*printf\s*,\s*(.+)\s*,\s*(.+)\s*\)\s*\)\s*\)/__printf($1, $2)/g ; print; }' [akpm@linux-foundation.org: revert arch bits] Signed-off-by: Joe Perches <joe@perches.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mlx4_en: Updating driver versionYevgeny Petrilin2011-10-191-2/+2
| | | | | | | Driver version updated to 1.5.4.2 Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx4_en: Checksum counters per ringYevgeny Petrilin2011-10-191-0/+3
| | | | | | | | Not updating common counters from data path. The checksum counters are per ring, summarizing them when collecting statistics. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx4_en: Adjusting moderation per each ringAlexander Guller2011-10-091-3/+3
| | | | | | | | | Moderation is now done per ring and coalescing is enabled by set_ring_param in ethtool. Signed-off-by: Alexander Guller <alexg@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx4_en: Removing reserve vectorsAlexander Guller2011-10-091-3/+2
| | | | | | | | | Fixed a bug where ring size change caused insufficient memory upon driver restart due to unreleased EQs. Signed-off-by: Alexander Guller <alexg@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx4_en: Assigning TX irq per ringAlexander Guller2011-10-091-2/+2
| | | | | | | | | | | | | Until now only RX rings used irq per ring and TX used only one per port. >From now on, both of them will use the irq per ring while RX & TX ring[i] will use the same irq. Signed-off-by: Alexander Guller <alexg@mellanox.co.il> Signed-off-by: Sharon Cohen <sharonc@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx4: Move the Mellanox driverJeff Kirsher2011-08-111-0/+607
Moves the Mellanox driver into drivers/net/ethernet/mellanox/ and make the necessary Kconfig and Makefile changes. CC: Roland Dreier <roland@kernel.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
OpenPOWER on IntegriCloud