summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel
Commit message (Collapse)AuthorAgeFilesLines
...
| * | i40e: fix misleading message about promisc setting on un-trusted VFHarshitha Ramamurthy2019-05-031-12/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A refactor of the i40e_vc_config_promiscuous_mode_msg function moved the check for un-trusted VF into another function. We have to lie to an un-trusted VF that its request to set promiscuous mode is successful even when it is not because we don't want the VF to find out its trust status this way. With the refactor, we were running into a case where even though we were not setting promiscuous mode for an un-trusted VF, we still printed a misleading message that it was successful. This patch fixes that by ensuring that a success message is printed on the host side only when the promiscuous mode change has been successful. Signed-off-by: Harshitha Ramamurthy <harshitha.ramamurthy@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | i40e: update version numberAlice Michael2019-05-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Just bumping the version number appropriately. Signed-off-by: Alice Michael <alice.michael@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | i40e: remove out-of-range comparisons in i40e_validate_cloud_filterJacob Keller2019-05-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function i40e_validate_cloud_filter checks that the destination and source port numbers are valid by attempting to ensure that the number is non-zero and no larger than 0xFFFF. However, the types for the dst_port and src_port variable are __be16 which by definition cannot be larger than 0xFFFF Since these values cannot be larger than 2 bytes, the check to see if they exceed 0xFFFF is meaningless. One might consider these checks as some sort of defensive coding, in case the type was later changed. However, these checks also byte-swap the value before comparison using be16_to_cpu, which will truncate the values to 16bits anyways. Additionally, changing the type would require updating the opcodes to support new data layout of these virtchnl commands. Remove the check to silence the -Wtype-limits warning that was added to GCC 8. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | i40e: Further implementation of LLDPAleksandr Loktionov2019-05-038-13/+93
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This code implements driver code changes necessary for LLDP Agent support. Modified i40e_aq_start_lldp() and i40e_aq_stop_lldp() adding false parameter whether LLDP state should be persistent across power cycles. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | i40e: Report advertised link modes on 40GBase_LR4, CR4 and fibreAdam Ludkiewicz2019-05-031-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | Add assignments for advertising 40GBase_LR4, 40GBase_CR4 and fibre Signed-off-by: Adam Ludkiewicz <adam.ludkiewicz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | i40e: ShadowRAM checksum calculation changeMaciej Paczkowski2019-05-031-4/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to changes in FW the SW is required to perform double SR dump in some cases. Implementation adds two new steps to update nvm checksum function: * recalculate checksum and check if checksum in NVM is correct * if checksum in NVM is not correct then update it again Signed-off-by: Maciej Paczkowski <maciej.paczkowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | i40e: remove error msg when vf with port vlan tries to remove vlan 0Aleksandr Loktionov2019-05-031-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | VF's attempt to delete vlan 0 when a port vlan is configured is harmless in this case pf driver just does nothing. If vf will try to remove other vlans when a port vlan is configured it will still produce error as before. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | i40e: change behavior on PF in response to MDD eventCarolyn Wyborny2019-05-031-10/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TX MDD events reported on the PF are the result of the PF misconfiguring a descriptor and not because of "bad actions" by anything else. No need to reset now because if it results in a Tx hang, the Tx hang check will take care of it. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | i40e: Fix for allowing too many MDD events on VFCarolyn Wyborny2019-05-031-5/+3
| |/ | | | | | | | | | | | | | | | | | | | | This patch changes the driver behavior when detecting a VF MDD event. It now disables the VF after one event, which indicates a hw detected problem in the VF. Before this change, the PF would allow a couple of events before doing the reset. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * net: pass net_device argument to the eth_get_headlenStanislav Fomichev2019-04-238-8/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update all users of eth_get_headlen to pass network device, fetch network namespace from it and pass it down to the flow dissector. This commit is a noop until administrator inserts BPF flow dissector program. Cc: Maxim Krasnyansky <maxk@qti.qualcomm.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: intel-wired-lan@lists.osuosl.org Cc: Yisen Zhuang <yisen.zhuang@huawei.com> Cc: Salil Mehta <salil.mehta@huawei.com> Cc: Michael Chan <michael.chan@broadcom.com> Cc: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| * ice: Calculate ITR increment based on direct calculationBrett Creeley2019-04-181-72/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently when calculating how much to increment ITR by inside of ice_update_itr() we do some estimations and intermediate calculations. Instead of doing estimations, just do the calculation directly. This allows for a more accurate value and it makes it easier for the next person to understand and update. Also, remove the dividing the ITR value by 2 when latency driven because the ITR values are already so low for 100Gbps speed. This should help get to the desired ITR value faster. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * ice: Bump driver versionAnirudh Venkataramanan2019-04-181-1/+1
| | | | | | | | | | | | | | | | Update driver version to 0.7.4 Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * ice: Add code to control FW LLDP and DCBXAnirudh Venkataramanan2019-04-185-2/+159
| | | | | | | | | | | | | | | | | | This patch adds code to start or stop LLDP and DCBX in firmware through use of ethtool private flags. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * ice: Add code for DCB rebuildAnirudh Venkataramanan2019-04-183-0/+85
| | | | | | | | | | | | | | | | | | This patch introduces a new function ice_dcb_rebuild which reinitializes DCB after a reset. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * ice: Add code to get DCB related statisticsAnirudh Venkataramanan2019-04-186-2/+86
| | | | | | | | | | | | | | | | | | This patch adds a new function ice_update_dcb_stats to get DCB stats from the hardware and ethtool support for displaying these stats. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * ice: Add priority information into VLAN headerAnirudh Venkataramanan2019-04-184-3/+54
| | | | | | | | | | | | | | | | | | This patch introduces a new function ice_tx_prepare_vlan_flags_dcb to insert 802.1p priority information into the VLAN header Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * ice: Update rings based on TC informationAnirudh Venkataramanan2019-04-185-0/+52
| | | | | | | | | | | | | | | | | | This patch adds a new function ice_vsi_cfg_dcb_rings which updates a VSI's rings based on DCB traffic class information. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * ice: Add code to process LLDP MIB change eventsAnirudh Venkataramanan2019-04-185-3/+47
| | | | | | | | | | | | | | | | | | This patch adds support to process LLDP MIB change notifications sent by the firmware. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * ice: Add code for DCB initialization part 4/4Anirudh Venkataramanan2019-04-182-2/+81
| | | | | | | | | | | | | | | | | | When the firmware doesn't support LLDP or DCBX, the driver should switch to "software LLDP mode". This patch adds support for the same. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * ice: Add code for DCB initialization part 3/4Anirudh Venkataramanan2019-04-1814-82/+997
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a new function ice_pf_dcb_cfg (and related helpers) which applies the DCB configuration obtained from the firmware. As part of this, VSIs/netdevs are updated with traffic class information. This patch requires a bit of a refactor of existing code. 1. For a MIB change event, the associated VSI is closed and brought up again. The gap between closing and opening the VSI can cause a race condition. Fix this by grabbing the rtnl_lock prior to closing the VSI and then only free it after re-opening the VSI during a MIB change event. 2. ice_sched_query_elem is used in ice_sched.c and with this patch, in ice_dcb.c as well. However, ice_dcb.c is not built when CONFIG_DCB is unset. This results in namespace warnings (ice_sched.o: Externally defined symbols with no external references) when CONFIG_DCB is unset. To avoid this move ice_sched_query_elem from ice_sched.c to ice_common.c. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * ice: Add code for DCB initialization part 2/4Anirudh Venkataramanan2019-04-186-1/+1057
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces a new top level function ice_init_dcb (and related lower level helper functions) which continues the DCB init flow. This function uses ice_get_dcb_cfg to get, parse and store the DCB configuration. Once this is done, it sets itself up to be notified by the firmware on LLDP MIB change events. Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * ice: Add code for DCB initialization part 1/4Anirudh Venkataramanan2019-04-1810-0/+230
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces a skeleton for ice_init_pf_dcb, the top level function for DCB initialization. Subsequent patches will add to this DCB init flow. In this patch, ice_init_pf_dcb checks if DCB is a supported capability. If so, an admin queue call to start the LLDP and DCBx in firmware is issued. If not, an error is reported. Note that we don't fail the driver init if DCB init fails. Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * ice: Bump versionAnirudh Venkataramanan2019-04-181-1/+1
| | | | | | | | | | | | | | | | Bump driver version to 0.7.3 Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * ice: Fix incorrect use of abbreviationsAnirudh Venkataramanan2019-04-1816-294/+294
| | | | | | | | | | | | | | | | | | Capitalize abbreviations and spell out some that aren't obvious. Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * ice: Fix typos in code commentsAnirudh Venkataramanan2019-04-184-6/+6
| | | | | | | | | | | | | | | | | | This patch fixes typos in code comments. Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * i40e: Fix misleading error messageCarolyn Wyborny2019-04-161-1/+1
| | | | | | | | | | | | | | | | | | | | This patch changes an error code for an admin queue head overrun to use I40E_ERR_ADMIN_QUEUE_FULL instead of I40E_ERR_QUEUE_EMPTY. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * i40e: Able to add up to 16 MAC filters on an untrusted VFAdam Ludkiewicz2019-04-161-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the problem with the driver being able to add only 7 multicast MAC address filters instead of 16. The problem is fixed by changing the maximum number of MAC address filters to 16+1+1 (two extra are needed because the driver uses 1 for unicast MAC address and 1 for broadcast). Signed-off-by: Adam Ludkiewicz <adam.ludkiewicz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * i40e: Report advertised link modes on 40GBASE_SR4Adam Ludkiewicz2019-04-161-1/+6
| | | | | | | | | | | | | | | | | | Defined the advertised link mode field for 40000baseSR4_Full for use with ethtool. Signed-off-by: Adam Ludkiewicz <adam.ludkiewicz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * i40e: The driver now prints the API version in error messageAdam Ludkiewicz2019-04-161-3/+15
| | | | | | | | | | | | | | | | Added the API version in the error message for clarity. Signed-off-by: Adam Ludkiewicz <adam.ludkiewicz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * i40e: Changed maximum supported FW API version to 1.8Adam Ludkiewicz2019-04-162-3/+3
| | | | | | | | | | | | | | | | A new FW has been released, which uses API version 1.8. Signed-off-by: Adam Ludkiewicz <adam.ludkiewicz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * i40e: Remove misleading messages for untrusted VFGrzegorz Siwik2019-04-161-5/+16
| | | | | | | | | | | | | | | | | | Removed misleading messages when untrusted VF tries to add more addresses than NIC limit Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * i40e: Update i40e_init_dcb to return correct errorChinh T Cao2019-04-163-19/+13
| | | | | | | | | | | | | | | | | | Modify the i40e_init_dcb to return the correct error when LLDP or DCBX is not in operational state. Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * i40e: Fix for 10G ports LED not blinkingPiotr Marczak2019-04-161-33/+0
| | | | | | | | | | | | | | | | | | | | | | On some hardware LEDs would not blink after command 'ethtool -p {eth-port}' in certain circumstances. Now, function does not care about the activity of the LED (though still preserves its state) but forcibly executes identification blinking and then restores the LED state. Signed-off-by: Piotr Marczak <piotr.marczak@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * i40e: save PTP time before a device resetJacob Keller2019-04-163-4/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the case where PTP is running on the hardware clock, but the kernel system time is not being synced, a device reset can mess up the clock time. This occurs because we reset the clock time based on the kernel time every reset. This causes us to potentially completely reset the PTP time, and can cause unexpected behavior in programs like ptp4l. Avoid this by saving the PTP time prior to device reset, and then restoring using that time after the reset. Directly restoring the PTP time we saved isn't perfect, because time should have continued running, but the clock will essentially be stopped during the reset. This is still better than the current solution of assuming that the PTP HW clock is synced to the CLOCK_REALTIME. We can do even better, by saving the ktime and calculating a differential, using ktime_get(). This is based on CLOCK_MONOTONIC, and allows us to get a fairly precise measure of the time difference between saving and restoring the time. Using this, we can update the saved PTP time, and use that as the value to write to the hardware clock registers. This, of course is not perfect. However, it does help ensure that the PTP time is restored as close as feasible to the time it should have been if the reset had not occurred. During device initialization, continue using the system time as the source for the creation of the PTP clock, since this is the best known current time source at driver load. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * i40e: don't allow changes to HW VLAN stripping on active port VLANsNicholas Nunley2019-04-161-0/+8
| | | | | | | | | | | | | | | | | | Modifying the VLAN stripping options when a port VLAN is configured will break traffic for the VSI, and conceptually doesn't make sense, so don't allow this. Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * i40e: Implement DDP support in i40e driverAleksandr Loktionov2019-04-168-22/+769
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces DDP (Dynamic Device Personalization) which allows loading profiles that change the way internal parser interprets processed frames. To load DDP profiles it utilizes ethtool flash feature. The files with recipes must be located in /var/lib/firmware directory. Afterwards the recipe can be loaded by invoking: ethtool -f <if_name> <file_name> 100 ethtool -f <if_name> - 100 See further details of this feature in the i40e documentation, or visit https://www.intel.com/content/www/us/en/architecture-and-technology/ethernet/dynamic-device-personalization-brief.html The driver shall verify DDP profile can be loaded in accordance with the rules: * Package with Group ID 0 are exclusive and can only be loaded the first. * Packages with Group ID 0x01-0xFE can only be loaded simultaneously with the packages from the same group. * Packages with Group ID 0xFF are compatible with all other packages. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * i40e: Queues are reserved despite "Invalid argument" errorAdam Ludkiewicz2019-04-161-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Added a new local variable in the i40e_setup_tc function named old_queue_pairs so num_queue_pairs can be restored to the correct value in case configuring queue channels fails. Additionally, moved the exit label in the i40e_setup_tc function so the if (need_reset) block can be executed. Also, fixed data packing in the i40e_setup_tc function. Signed-off-by: Adam Ludkiewicz <adam.ludkiewicz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2019-04-059-74/+58
| |\ | | | | | | | | | | | | | | | | | | | | | | | | Minor comment merge conflict in mlx5. Staging driver has a fixup due to the skb->xmit_more changes in 'net-next', but was removed in 'net'. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: move skb->xmit_more hint to softnet dataFlorian Westphal2019-04-019-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are two reasons for this. First, the xmit_more flag conceptually doesn't fit into the skb, as xmit_more is not a property related to the skb. Its only a hint to the driver that the stack is about to transmit another packet immediately. Second, it was only done this way to not have to pass another argument to ndo_start_xmit(). We can place xmit_more in the softnet data, next to the device recursion. The recursion counter is already written to on each transmit. The "more" indicator is placed right next to it. Drivers can use the netdev_xmit_more() helper instead of skb->xmit_more to check the "more packets coming" hint. skb->xmit_more is retained (but always 0) to not cause build breakage. This change takes care of the simple s/skb->xmit_more/netdev_xmit_more()/ conversions. Remaining drivers are converted in the next patches. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ice: Remove "2 BITS" commentAnirudh Venkataramanan2019-03-261-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some enums in ice_tx_desc_cmd_bits have a trailing /* 2 BITS */ comment, but the value has just one bit set (ex. ICE_TX_DESC_CMD_L4T_EOFT_SCTP has the value 0x200 (i.e. only bit 9 is set). This is confusing and misleading. So remove the comment. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | ice: Update comment regarding the ITR_GRAN_SBrett Creeley2019-03-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the driver now hard codes the ITR granularity to 2 us in the GLINT_CTL register the comment next to ITR_GRAN_S needs to be updated. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | ice: Update function header for __ice_vsi_get_qsAnirudh Venkataramanan2019-03-261-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | Remove some redundant text in the function header for __ice_vsi_get_qs Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | ice: Remove unnecessary bracesAnirudh Venkataramanan2019-03-261-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | Single statement if conditions don't need braces. Remove it. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | ice: Remove unused function prototypeAnirudh Venkataramanan2019-03-261-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 37bb83901286 ("ice: Move common functions out of ice_main.c part 7/7") seems to have inadvertently introduced a function prototype for ice_vsi_cfg_tc without a corresponding function implementation. Remove it. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | ice: Add missing case in print_link_msg for printing flow controlBrett Creeley2019-03-261-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we aren't checking for the ICE_FC_NONE case for the current flow control mode. This is causing "Unknown" to be printed for the current flow control method if flow control is disabled. Fix this by adding the case for ICE_FC_NONE to print "None". Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | ice: Audit hotpath structures with paholeBrett Creeley2019-03-264-20/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the ice_q_vector structure and ice_ring_container structure are taking up more space than necessary due to cache alignment holes and unnecessary variables respectively. This is not helping the driver's performance. The following fixes were done to improve cache alignment, reduce wasted space, and increase performance. 1. Remove the ice_latency_range enum as it is unused. 2. Remove the latency_range variable in the ice_ring_container structure. 3. Change the size of the itr_idx in the ice_ring_container structure from an int to an u16. This reduced the size of ice_ring_container structure to 32 Bytes so it has no holes or padding. 4. Re-arrange the ice_q_vector structure using pahole to align members as best as possible in regards to 64 Byte cache line size. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | ice: Do not bail out when filter already existsPreethi Banala2019-03-261-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If filter already exists, do not go through error path flow but instead continue to process rest of the function. Hence have an appropriate check after adding MAC filters. Signed-off-by: Preethi Banala <preethi.banala@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | ice: Fix issue with VF attempt to delete default MAC addressAkeem G Abodunrin2019-03-261-8/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes issue that occurs when VF is attempting to remove default LAN/MAC address, which is programmed by the administrator. We shouldn't return error for the call by the VF, but continue with the remaining steps to handle MAC opcode. Also update the dev_err message to explicitly say that VF can't change MAC programmed by PF. Also change "mac" to "MAC" for kernel print statements in the same file. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | ice: enable VF admin queue interruptsMitch Williams2019-03-262-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The VPINT_MBX_CTL register array must be programmed to enable VF admin queue interrupts. Without this, VFs never get interrupts on vector 0, and some VF drivers will fail to init. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | ice: Fix for adaptive interrupt moderationAnirudh Venkataramanan2019-03-263-24/+275
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 63f545ed1285 ("ice: Add support for adaptive interrupt moderation") was meant to add support for adaptive interrupt moderation but there was an error on my part while formatting the patch, and thus only part of the patch ended up being submitted. This patch rectifies the error by adding the rest of the code. Fixes: 63f545ed1285 ("ice: Add support for adaptive interrupt moderation") Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
OpenPOWER on IntegriCloud