summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/i40evf
Commit message (Collapse)AuthorAgeFilesLines
...
* i40e/i40evf: improve Tx performance with a small tweakJesse Brandeburg2015-07-141-0/+2
| | | | | | | | | | Add a prefetch for the next Tx descriptor to be used when we know there are more coming. Change-ID: Ibb9acab11d508eec2db7da795df74debc16eeacb Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e/i40evf: Update Flex-10 related device/function capabilitiesPawel Orlowski2015-07-141-1/+11
| | | | | | | | | | | | | | | | The Flex10 device/function capability has been upgraded to include information needed to support Flex-10 configurations. This patch adds new fields to the i40e_hw_capabilities structure and updates i40e_parse_discover_capabilities functions to extract them from the AQ response. Naming convention has changed to use flex10 mode instead of existing mfp_mode_1. Change-ID: I305dd888866985a30293acb3fb14fa43ca6b79ea Signed-off-by: Pawel Orlowski <pawel.orlowski@intel.com> Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e/i40evf: Add stats to track FD ATR and SB dynamic enable stateAnjali Singhai Jain2015-07-141-0/+2
| | | | | | | | | | | | | Since the driver can dynamically enable/disable FD ATR and SB features, these stats help keep track of the current state and along with fd_flush count provide a means to debug what could be going on with the flow director filters. This will take away the need for being verbose in our debug logs with respect to FD. Change-ID: I29224f750fe6602391043655d18996570720377d Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40evf: don't configure unused RSS queuesMitch Williams2015-06-261-1/+1
| | | | | | | | | | | | | The driver will only configure as many queues as there are available CPUs, up the maximum number of queues. However, it always configures RSS as though it is using the maximum number of queues. This can cause the device to drop a lot of RX traffic, as the packets get assigned to nonfunctional queues. Fix this by only configuring RSS with the number of active queues. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40evf: fix panic during MTU changeMitch Williams2015-06-264-65/+54
| | | | | | | | | | | | | | | | | | Down was requesting queue disables, but then exited immediately without waiting for the queues to actually disable. This could allow any function called after i40evf_down to run immediately, including i40evf_up, and causes a memory leak. Removing the whole reinit_locked function is the best way to go about this, and allows for the driver to handle the state changes by requesting reset from the periodic timer. Also, add a couple WARN_ONs in slow path to help us recognize if we re-introduce this issue or missed any cases. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-06-081-15/+10
|\
| * i40e/i40evf: Fix mixed size frags and linearizationAnjali Singhai Jain2015-06-041-15/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a bug where the i40e Tx queue will hang if this skb is passed to the driver. With mixed size fragments while using TSO there was a corner case where we needed to linearize but we were not. This was seen with iSCSI traffic and could be reproduced with a frag list that looks like this: num_frags = 17, gso_segs = 17, hdr_len = 66, skb_shinfo(skb)->gso_size = 1448 size = 3002, j = 1, frag_size = 2936, num_frags = 17 size = 4268, j = 1, frag_size = 4096, num_frags = 16 size = 5534, j = 1, frag_size = 4096, num_frags = 15 size = 5352, j = 1, frag_size = 4096, num_frags = 14 size = 5170, j = 1, frag_size = 4096, num_frags = 13 size = 3468, j = 1, frag_size = 2576, num_frags = 12 size = 750, j = 1, frag_size = 112, num_frags = 11 size = 862, j = 2, frag_size = 112, num_frags = 10 size = 974, j = 3, frag_size = 112, num_frags = 9 size = 1126, j = 4, frag_size = 152, num_frags = 8 size = 1330, j = 5, frag_size = 204, num_frags = 7 size = 1534, j = 6, frag_size = 204, num_frags = 6 size = 356, j = 1, frag_size = 204, num_frags = 5 size = 560, j = 2, frag_size = 204, num_frags = 4 size = 764, j = 3, frag_size = 204, num_frags = 3 size = 968, j = 4, frag_size = 204, num_frags = 2 size = 1140, j = 5, frag_size = 172, num_frags = 1 result: linearize = 0, j = 6 Change-ID: I79bb1aeab0af255fe2ce28e93672a85d85bf47e8 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | i40e/i40evf: remove time_stamp memberJesse Brandeburg2015-05-282-8/+0
| | | | | | | | | | | | | | | | | | | | | | The driver doesn't use the time_stamp member to determine if there is a tx_hang any more. There really isn't any point to the variable at all so just remove it. It was left over from a previous tx_hang design. Change-ID: I4c814827e1bcb46e45118fe37acdcfa814fb62a0 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | i40e/i40evf: force inline transmit functionsJesse Brandeburg2015-05-281-20/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Inlining these functions gives us about 15% more 64 byte packets per second when using pktgen. 13.3 million to 15 million with a single queue. Also fix the function names in i40evf to i40evf not i40e while we are touching the function header. Change-ID: I3294ae9b085cf438672b6db5f9af122490ead9d0 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | i40evf: skb->xmit_more supportJesse Brandeburg2015-05-281-41/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Eric added support for skb->xmit_more in i40e, this ports that into i40evf as well. Support skb->xmit_more in i40evf is straightforward; we need to move around i40e_maybe_stop_tx() call to correctly test netif_xmit_stopped() before taking the decision to not kick the NIC. Change-ID: Idddda6a2e4a7ab335631c91ced51f55b25eb8468 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | i40e/i40evf: Remove unneeded TODOGreg Rose2015-05-281-3/+0
| | | | | | | | | | | | | | | | | | There's no need for a counter so remove the TODO comment. Change-ID: I3321dda04934c4f5fda9b279ab666192bda44214 Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | i40e/i40evf: Add stats to count Tunnel ATR hitsAnjali Singhai Jain2015-05-281-0/+1
| | | | | | | | | | | | | | | | | | | | Add a 3rd dynamic filter counter to track Tunneled ATR hits separately. Ethtool port stat "fdir_atr_tunnel_match" Change-ID: Idd978b6db2a462b5722397cd2ffd04ef055f8655 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | i40e/i40evf: Add ATR support for tunneled TCP/IPv4/IPv6 packets.Anjali Singhai Jain2015-05-282-18/+17
| | | | | | | | | | | | | | | | | | | | | | Without this, RSS would have done inner header load balancing. Now we can get the benefits of ATR for tunneled packets to better align TX and RX queues with the right core/interrupt. Change-ID: I07d0e0a192faf28fdd33b2f04c32b2a82ff97ddd Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | net: batch of last_rx update avoidance in ethernet drivers.françois romieu2015-05-141-2/+0
|/ | | | | | | | | | | | | | | | None of those drivers uses last_rx for its own needs. See 4dc89133f49b8cfd77ba7e83f5960aed63aaa99e ("net: add a comment on netdev->last_rx") for reference. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Zhangfei Gao <zhangfei.gao@linaro.org> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Wingman Kwok <w-kwok2@ti.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* i40e/i40evf: Save WR_CSR_PROT field from DEV/FUNC capabilitiesKevin Scott2015-04-141-0/+1
| | | | | | | | | | Store the 8 bytes of the WR_CSR_PROT field returned as part of the get device/function capabilities AQ command. Change-ID: Ifcaeea2ff29885fa769e4f384c7db88a25e8afd0 Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40evf: remove aq_pendingMitch Williams2015-04-143-38/+12
| | | | | | | | | | | | The aq_pending field in the adapter structure is actually redundant with the current_op field. Remove the aq_pending field and expunge all traces of it from the official record. This simplifies the code significantly, especially in the virtual channel completion routine. Change-ID: Ib2957c8c19882bd0cecc6fcd133912c24b46a1ff Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40evf: fix bad indentationMitch Williams2015-04-141-1/+1
| | | | | | | | Not sure how this slipped through. Cosmetic change only. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e/i40evf: Use dma_rmb where appropriateAlexander Duyck2015-04-091-2/+2
| | | | | | | | | | Update i40e and i40evf to use dma_rmb. This should improve performance by decreasing the barrier overhead on strong ordered architectures. Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* i40evf: Refactor VF RSS codeAnjali Singhai Jain2015-04-031-32/+11
| | | | | | | | | | Refactor VF RSS code to allow RSS on a single queue and eliminate the need for the next_queue function. Change-ID: I9253bad96b7f542ee7036e15636db0e5d58d8ef2 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40evf: protect VLAN filter listMitch Williams2015-04-031-2/+22
| | | | | | | | | | | | The MAC filter list is protected by a critical task bit, and the VLAN list should be protected as well. This prevents list corruption if the watchdog happens to run at the same time as a VLAN filter is being added or deleted. Change-ID: Ia4867cebbbb046a1f38012771b288a634ca5882b Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e/i40evf: Set Ethernet protocol correctly when Tx VLAN offloads are disabledGreg Rose2015-04-031-0/+14
| | | | | | | | | | | | If transmit VLAN HW offloads are disabled then the network stack sends up an skb with the protocol set to 8021q. In that case to get the correct checksum offloads we have to reset the skb protocol to the encapsulated ethertype. Change-ID: I903d78533de09b1c5d3ec695ee1990dd0fa5dd0d Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e/i40evf: fix bug when skb allocation failsJesse Brandeburg2015-04-031-1/+4
| | | | | | | | | | | If the skb allocation fails we should not continue using the skb pointer. Breaking out at the point of failure means that at the next RX interrupt the driver will try the allocation again. Change-ID: Iefaad69856ced7418bfd92afe55322676341f82e Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40evf: Fix Outer UDP RX checksum codeAnjali Singhai Jain2015-04-031-11/+13
| | | | | | | | | | | | | Inner protocol being UDP should not stop us from verifying Outer UDP checksum correctness. If the Outer protocol is not UDP (NVGRE) we should not be doing a UDP checksum check. If the packet has zero checksum, skip checksum check. Change-ID: Ie7f153feb276a59f66a54a0938901b2c0a8100fa Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40evf: add FW version to ethtool infoMitch Williams2015-03-271-1/+1
| | | | | | | | | | | | Customers reported that the firmware version information from i40evf is unlike that of ixgbevf and was causing problems with their scripts. To resolve this, populate the field to align with ixgbevf. Change-ID: I9f4e24f6a76cd819bbe07087aab2b74f715ec103 Reported-by: Sourav Chatterjee <sourav.chatterjee@intel.com> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40evf: resequence close operationsMitch Williams2015-03-271-7/+3
| | | | | | | | | | | | | | | Call the netdev carrier off and TX disable functions first, before other shutdown operations. This stops the stack from hitting us with transmits while we're shutting down. Additionally, disable NAPI before disabling interrupts, or the interrupt might get re-enabled inappropriately. Finally, remove the call to netif_tx_stop_all_queues, as it is redundant - the call to netif_tx_disable already did the same thing. Change-ID: I8b2dd25231b82817746cc256234a5eeeb4abaccc Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40evf: delay releasing ringsMitch Williams2015-03-273-13/+14
| | | | | | | | | | | | | | | | | | When the VF interface is closed, we cannot immediately free our rings and RX buffers, because the hardware hasn't yet stopped accessing this memory. This shows up as a panic or memory corruption when the device is brought down while under heavy stress. To fix this, delay releasing resources until we receive acknowledgment from the PF driver that the rings have indeed been stopped. Because of this delay, we also need to check to make sure that all of our admin queue requests have been handled before allowing the device to be opened. Change-ID: I44edd35529ce2fa2a9512437a3a8e6f14ed8ed63 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e/i40evf: implement KR2 supportJesse Brandeburg2015-03-272-1/+3
| | | | | | | | | | | The new devices need a new device ID some other defines to handle the new 20G speed for KR2. Change-ID: I03f717e364afe59657e8c9ce5ffaad856b4b21df Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e/i40evf: Bump i40e/i40evf versionCatherine Sullivan2015-03-091-1/+1
| | | | | | | | | Bump PF version to 1.2.37 and VF version to 1.2.25 Change-ID: I0287a750408250dc055c03e1f744fd5f0caefd68 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e/i40evf: fix accidental write to ITR registersJesse Brandeburg2015-03-092-0/+4
| | | | | | | | | | | | | Fix a bug introduced in the force writeback code, where the interrupt rate was set to 0 (maximum) by accident. The driver must correctly set the NOITR fields to avoid ITR update as a side effect of triggering the software interrupt. Change-ID: I290851ae04ef3811c43aab5ee33242029f26c1a3 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40vf: don't stop me nowMitch Williams2015-03-091-5/+6
| | | | | | | | | | | | | If a reset occurs when the netdev is closed, the reset task will hang in napi_disable, causing deadlocks and general grumpiness. Check to make sure the device is actually running before stopping everything. This allows the reset task to complete and have a real good time. Change-ID: Iaaea84acbcb9b3810c216b14c3326e4287b75b58 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ethernet: codespell comment spelling fixesJoe Perches2015-03-081-2/+2
| | | | | | | | | | | | | | | To test a checkpatch spelling patch, I ran codespell against drivers/net/ethernet/. $ git ls-files drivers/net/ethernet/ | \ while read file ; do \ codespell -w $file; \ done I removed a false positive in e1000_hw.h Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* i40e/i40evf: Bump versionSravanthi Tangeda2015-03-071-1/+1
| | | | | | | | Bump i40e to 1.2.12 and i40evf to 1.2.6. Change-ID: I641871da3a9abd396b28eda5744a4d68493c1400 Signed-off-by: Sravanthi Tangeda <sravanthi.tangeda@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e/i40evf: enable prefetch of Tx descriptors during cleanupJesse Brandeburg2015-03-071-0/+2
| | | | | | | | | Performance can be improved a bit by imitating ixgbe and using prefetch to get us the next Tx descriptor. Change-ID: Ice7ffd4cd0ce87c35295059bdb7972a7f53723aa Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e/i40evf: Simplify tunnel selection logicAnjali Singhai Jain2015-03-071-2/+10
| | | | | | | | Use l4_tunnel type generically to keep code flow simple. Change-ID: Ic52287e3b1ca4204e6b6e13431890c1a6ae9c422 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e/i40evf: Refactor i40e_debug_aq and make some functions staticShannon Nelson2015-03-072-23/+23
| | | | | | | | | | | | A sparse complaint in i40e_debug_aq in a funky buffer write goes away by straightening out the code out to something less convoluted. Also fix some other sparse warnings while we are at it, making some functions static and using NULL instead of 0. Change-ID: I93907534fe1f1f675830774b3d14ecf1c6ffc9a0 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e/i40evf: Version bumpSravanthi Tangeda2015-03-051-1/+1
| | | | | | | | | Bump i40e to 1.2.11 and i40evf to 1.2.5 Change-ID: Ie13375941606b0a027e5b5dbc235f5f5f03b75c8 Signed-off-by: Sravanthi Tangeda <sravanthi.tangeda@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e/i40evf: Clean up some formatting and other thingsJesse Brandeburg2015-03-053-4/+1
| | | | | | | | | | Fix some double blank lines and un-split a function declaration that all fits on one line. Also make i40e_get_priv_flags static. Change-ID: I11b5d25d1153a06b286d0d2f5d916d7727c58e4a Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e/i40evf: grab NVM devstarter version not image versionShannon Nelson2015-03-051-1/+1
| | | | | | | | | | | 0x2A is the NVM version so it has useful data but it is per image version every image can have a different one. 0x18 is the dev starter version which all the images for release will have the same version. Of the two 0x18 is more useful and is what should be displayed. Change-ID: Idf493da13a42ab211e2de0bef287f5de51033cca Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-03-032-36/+108
|\ | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/rocker/rocker.c The rocker commit was two overlapping changes, one to rename the ->vport member to ->pport, and another making the bitmask expression use '1ULL' instead of plain '1'. Signed-off-by: David S. Miller <davem@davemloft.net>
| * i40evf: TCP/IPv6 over Vxlan Tx checksum offload fixAnjali Singhai2015-02-261-12/+12
| | | | | | | | | | | | | | | | | | | | We were checking the outer Protocol flags and deciding the flow for inner header. This patch fixes that. This fixes the Tx checksum offload for TCP/IPv6 over vxlan. Change-ID: I837aaea921d34f71b24c2bc32aaadea5001ddf78 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * i40e: fix race in hang checkJesse Brandeburg2015-02-261-24/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver was having some issues with false Tx hang detection. This makes the driver a little more direct with the checks for progress forward by directly checking the head write back address and tail register when determining progress. This avoids Tx hangs where the software gets behind, because we are directly checking hardware state when determining hang state. Change-ID: I774f0e861c9e8ab5ccb213634100fe15440ae24a Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * i40e: Fix TSO with more than 8 frags per segment issueAnjali Singhai2015-02-262-0/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The hardware has some limitations the driver needs to adhere to, that we found in extended testing. 1) no more than 8 descriptors per packet on the wire 2) no header can span more than 3 descriptors If one of these events occurs, the hardware will generate an internal error and freeze the Tx queue. This patch linearizes the skb to avoid these situations. Change-ID: I37dab7d3966e14895a9663ec4d0aaa8eb0d9e115 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | i40e/i40evf: Bump versionsSravanthi Tangeda2015-03-031-1/+1
| | | | | | | | | | | | | | | | Bump i40e to 1.2.10 and i40evf to 1.2.4 Change-ID: I48aa64df05fcc8356e7026f3a9e69ecf78d0c785 Signed-off-by: Sravanthi Tangeda <sravanthi.tangeda@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | i40evf: ethtool RSS fixesMitch Williams2015-03-031-6/+8
| | | | | | | | | | | | | | | | | | | | Add an extra check to make sure that the indirection table pointer is valid before dereferencing it. Change-ID: I698adbf3daff03081d01f489dc95a9f1ad8b12f1 Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | i40e/i40evf: Add missing packet types for VXLAN encapsulated packet typesAnjali Singhai Jain2015-03-031-4/+4
| | | | | | | | | | | | | | | | | | We were missing a few packet types for VXLAN offload. This patch fixes that. Change-ID: I4b23aa0b08e40ed49d0df6c49a5ed9f2009b44ce Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | i40e/i40evf: print FW build number in version stringShannon Nelson2015-03-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Include the FW build number in the formatted FW version string. In order to fit within ethtool's 32 character limit, the etrack's unused high order bits are trimmed as is the leading 0 for the NVM version. This leaves us with 2 character left for if/when the etrack id goes to 5 hex chars and the NVM major number goes to 2 chars. Change-ID: Icb004c4b9b14a2f54dd200b467fcc1d7b9297308 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | i40e/i40evf: Update driver versionsSravanthi Tangeda2015-02-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | Bump i40e to 1.2.9 and i40evf 1.2.3 Also update the copyright year. Change-ID: I345d777e94abd0acffe6a28793f675d251a86299 Signed-off-by: Sravanthi Tangeda <sravanthi.tangeda@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | i40evf: Add more info to interrupt vector namesCarolyn Wyborny2015-02-241-1/+2
| | | | | | | | | | | | | | | | | | | | | | This patch adds the netdev name to the VF misc vector name. Without this patch, all the interrupts show the same info, so it difficult to distinguish them. Change-ID: I247828697e1373ecfb5f8dc1bc9618e98a7f4942 Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | i40evf: allow enabling of debug prints via ethtoolAshish Shah2015-02-241-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | Copy setting from ethtool to the HW specific struct to actually enable prints. Change print from i40e to i40evf to differentiate drivers in bare metal scenarios. Also update the copyright year. Change-ID: I06fee26247299a08f2e1c70fc811a9ea0931c4dd Signed-off-by: Ashish Shah <ashish.n.shah@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | i40e/i40evf: Use advertised speed settings in ethtool and refactor get_settingsCatherine Sullivan2015-02-241-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a requested speed variable to the link_status struct to store the last speeds we requested from the firmware (the speeds the FW will be advertising with if autoneg is enabled). Use the advertised speed settings in get_settings in ethtool now that we have it. Also set the requested speed settings in set_settings in ethtool as they are requested and initialize them in probe based on what the firmware remembers as the last requested speeds. To accommodate some longer lines in this new code, and improve readability I have added two functions i40e_get_settings_link_up and i40e_get_settings_link_down which get_settings now calls first. It then does all of the settings that happen regardless of link state. Some PHY types that supported the same settings were also combined. Also update the copyright year. Change-ID: Ica0c5ac81b6069ea6a7406fce7482f7816d4455c Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
OpenPOWER on IntegriCloud