summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/i40e/i40e_main.c
Commit message (Collapse)AuthorAgeFilesLines
...
* i40e/i40evf: Bump build versionsCatherine Sullivan2014-03-191-1/+1
| | | | | | | | | Bump to version 0.3.36 for i40e and 0.9.16 for i40evf. Change-ID: I7b4ff97b32d2825181803c03c316381a7608a618 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e/i40evf: enable hardware feature head write backJesse Brandeburg2014-03-191-0/+5
| | | | | | | | | | | | | | The hardware supports a feature to avoid updating the descriptor ring by marking each descriptor with a DD bit, and instead writes a memory location with an update to where the driver should clean up to. Enable this feature. Change-ID: I5da4e0681f0b581a6401c950a81808792267fe57 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: Refactor and cleanup i40e_open(), adding i40e_vsi_open()Elizabeth Kappler2014-03-191-8/+32
| | | | | | | | | | | | This patch cleans up and moves a portion of i40e_open to i40e_vsi_open, in order to have a shorter vsi_open function that does only that. Change-ID: I1c418dda94dcfc0eb7d4386a70c330692ef5ecc9 Signed-off-by: Elizabeth Kappler <elizabeth.m.kappler@intel.com> Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: Patch to enable Ethtool/netdev feature flag for NTUPLE controlAnjali Singhai Jain2014-03-191-0/+41
| | | | | | | | | | | | This enables option '-k/-K' in ethtool for NTUPLE control. NTUPLE control requires a reset, to take effect. When the feature is turned off, the SW list of stored FD SB filters gets cleaned up. Change-ID: I9d564b67a10d4afa11de3b320d601c3d2e6edc1f Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: support VF link state ndoMitch Williams2014-03-191-0/+1
| | | | | | | | | | | | | | | | | | This netdev op allows the PF driver to control the virtual link state of the VF devices. This can be used to deny naughty VF drivers access to the wire, or to allow VFs (regardless of temperament) to communicate with each other over the device's internal switch even though external link is down. Add the actual ndo function, and modify vc_notify_link_state to check the link status of each VF before sending a message in the case when physical link changes state. Change-ID: Ib5a6924da78c540789f21d26b5e8086d71c29384 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* net/i40e: Avoid double setting of NETIF_F_SG for the HW encapsulation ↵Or Gerlitz2014-03-181-3/+2
| | | | | | | | | feature mask The networking core does it for the driver during registration time. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Replace u64_stats_fetch_begin_bh to u64_stats_fetch_begin_irqEric W. Biederman2014-03-141-8/+8
| | | | | | | | | | | | | | | Replace the bh safe variant with the hard irq safe variant. We need a hard irq safe variant to deal with netpoll transmitting packets from hard irq context, and we need it in most if not all of the places using the bh safe variant. Except on 32bit uni-processor the code is exactly the same so don't bother with a bh variant, just have a hard irq safe variant that everyone can use. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* i40e/i40evf: Use dma_set_mask_and_coherentMitch Williams2014-03-141-10/+6
| | | | | | | | | | | | In Linux 3.13, dma_set_mask_and_coherent was introduced, and we have been encouraged to use it. It simplifies the DMA mapping code a bit as well. Change-ID: I66e340245af7d0dedfa8b40fec1f5e352754432e Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: Let MDD events be handled by MDD handlerAnjali Singhai Jain2014-03-141-2/+1
| | | | | | | | | We have a separate handler for MDD events, a generic reset is not required. Change-ID: I77858e2d479e4e65c52aede67109464649ea0253 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: Bug fix for FDIR replay logicAnjali Singhai Jain2014-03-141-2/+4
| | | | | | | | | | | | The FDIR replay logic was being run a little too soon (before the queues were enabled) and hence the tail bump was not effective till a later transaction happened on the queue. Change-ID: Icfd7cd2e79fc3cae3cbd3f703a2b3a148b4e7bf6 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: Add code to handle FD table full conditionAnjali Singhai Jain2014-03-141-2/+56
| | | | | | | | | | | | | | | | Add code to enforce the following policy: - If the HW reports filter programming error, we check if it's due to a full table. - If so, we go ahead and turn off new rule addition for ATR and then SB in that order. - We monitor the programmed filter count, if enough room is created due to filter deletion/reset, we then re-enable SB and ATR new rule addition. Change-ID: I69d24b29e5c45bc4fa861258e11c2fa7b8868748 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: Fix function commentsAkeem G Abodunrin2014-03-141-1/+1
| | | | | | | | | | Correct misleading function comment. Change-ID: I3f66cff5cc00250a285756b6500a58fad8eba4b5 Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: simplified init stringJesse Brandeburg2014-03-141-0/+41
| | | | | | | | | | | | | | | | In a similar way to how ixgbe works, print a short one-line string showing what features and number of queues the driver and hardware has enabled at probe time. Example (wrapped for the commit message): i40e 0000:06:00.1: Features: PF-id[1] VFs: 64 VSIs: 66 QP: 32 FDir RSS ATR NTUPLE DCB Change-ID: I177bf7f93d1c4c921529c92fdf66e614f6b4f755 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: cleanup stringsJesse Brandeburg2014-03-141-27/+20
| | | | | | | | | | | | This patch cleans up the strings that the driver prints during normal operation and moves many strings into dev_dbg. It also cleans up strings printed during reset. Change-ID: I1835cc4e3c3b22596182b683284e6bb87eac61b2 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: make string references to q be queueJesse Brandeburg2014-03-141-6/+5
| | | | | | | | | | This cleans up strings for consistency, q is replaced with queue. Change-ID: Ia5f9dfae9af261f4c24485854264e02363729cf3 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: delete netdev after deleting napi and vectorsShannon Nelson2014-03-141-2/+4
| | | | | | | | | | | | We've been deleting the netdev before getting around to deleting the napi structs. Unfortunately, we then didn't delete the napi structs because we have a check for netdev, thus we were leaving garbage around in the system. Change-ID: Ife540176f6c9f801147495b3f2d2ac2e61ddcc58 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e/i40evf: Bump pf&vf build versionsCatherine Sullivan2014-03-061-1/+1
| | | | | | | | | Bump i40e to 0.3.34 and i40evf to 0.9.14. Change-ID: I6b3fb8ccf55b128d2baa4bdc20d3911ec81d4a5b Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: fix nvm version and remove firmware reportJesse Brandeburg2014-03-061-7/+0
| | | | | | | | | | | | | | | | | The driver needs to use the format that the current NVM uses when printing the version of the NVM. It should remain this way from now on forward. The driver was reporting when firmware was less than an expected version number, but this is not a requirement for the product and we print the firmware number at init and in ethtool -i output. Just remove the print. Change-ID: Ide0b856cd454ebf867610ef9a0d639bb358a4a60 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: Remove a redundant filter additionAnjali Singhai Jain2014-03-061-4/+7
| | | | | | | | | | | Remove a redundant filter addition to stop FW complaints about a redundant filter removal. Change-ID: I22bef6b682bd8d43432557e6e2b3e73ffb27b985 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: Remove a FW workaround for Number of MSIX vectorsAnjali Singhai Jain2014-03-061-0/+6
| | | | | | | | | | | The Number of MSIX vectors being reported is correct and hence we need a check to do the right thing for FWs before and after. Change-ID: I50902d1c848adcb960ea49ac73f7865ca871a1c3 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: Flow Director sideband accountingJoseph Gasparakis2014-03-061-1/+43
| | | | | | | | | | | | | | This patch completes implementation of the ethtool ntuple rule management interface. It adds the get, update and delete interface reset. Change-ID: Ida7f481d9ee4e405ed91340b858eabb18a52fdb5 Signed-off-by: Joseph Gasparakis <joseph.gasparakis@intel.com> Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e and i40evf: Bump driver versionsCatherine Sullivan2014-02-211-1/+1
| | | | | | | | | | | Update the driver versions. Change-ID: I3fe23024d17da0e614ce126edb365bb2c428d482 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* i40e: Change MSIX to MSI-XCatherine Sullivan2014-02-211-4/+5
| | | | | | | | | | | Fix inconsistent use of MSIX and MSI-X in messages. Change-ID: Iae9ffb42819677c34544719044ed77632e06147d Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* i40e: tighten up ring enable/disable flowMitch Williams2014-02-211-17/+15
| | | | | | | | | | | | | | Change the do/while to a for loop, so we don't hit the delay each time, even when the register is ready for action. Don't bother to set or clear the QENA_STAT bit as it is read-only. Change-ID: Ie464718804dd79f6d726f291caa9b0c872b49978 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* i40e: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev2014-02-181-27/+6
| | | | | | | | | | | | | | | | As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: e1000-devel@lists.sourceforge.net Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
* i40e: don't handle VF reset on unloadMitch Williams2014-02-131-5/+5
| | | | | | | | | | | | | | Set the DOWN flag before attempting to disable VFs when unloading the driver. Also, don't attempt to reset the VFs when the driver is unloading, because the switch configuration will fail. This fixes a panic on unload when VFs are enabled. Change-ID: I25a6567e89c9687145f510ff4f630932412c5c5d Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* i40e: enable extant VFsMitch Williams2014-02-131-0/+10
| | | | | | | | | | | | If VFs are present when the driver loads, then set up some resources so they can function. Change-ID: I485916a811609a9990ce663d06dc645f625b07ff Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* i40e: reset VFs after PF resetMitch Williams2014-02-131-0/+5
| | | | | | | | | | | | Reset all of the VFs after a PF reset, so that they are in a known state, and the VF driver can detect the reset and reinit itself. Change-ID: I93c5b3a0f8b1371d0da078f92de948b9d3a6413f Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* i40e: Setting i40e_down bit for tx_timeoutAkeem G Abodunrin2014-02-131-0/+1
| | | | | | | | | | | | If tx_timeout recovery failed, then it becomes necessary to set i40e_down bit before actually shutdown the connection. Change-ID: Iaac81df0e302116571827aa0cff450697fbb7fa3 Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* i40e: bump driver versionJesse Brandeburg2014-02-131-1/+1
| | | | | | | | | Update the driver version to 0.3.31-k. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* i40e: Add missing braces to i40e_dcb_need_reconfig()Dave Jones2014-01-271-1/+2
| | | | | | | | Indentation mismatch spotted with Coverity. Introduced in 4e3b35b044ea ("i40e: add DCB and DCBNL support") Signed-off-by: Dave Jones <davej@fedoraproject.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* i40e: Fix device ID define names to align to standardShannon Nelson2014-01-171-11/+11
| | | | | | | | | | | | Rework the device ID #defines to follow the _DEV_ID convention already established in the other Intel drivers. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* i40e: add DCB and DCBNL supportNeerav Parikh2014-01-171-18/+308
| | | | | | | | | | | | | | | | | | | | | | | | | This patch adds capability to configure DCB on i40e network interfaces using Intel XL710 adapter firmware APIs. By default all VSIs are only enabled for the default traffic class enabled by firmware for any given PF. The driver would query the firmware for the traffic classes that are enabled for the port and reconfigure the LAN VSI to match to the port traffic class settings. All other VSIs are only enabled for the default traffic class settings for now. The driver registers and listens to firmware events that may require change in the DCB settings. It may reconfigure the VSI settings based on these events. This patch exposes IEEE DCBNL interfaces for the i40e driver to allow any application to query the DCB settings on the adapter. Signed-off-by: Neerav Parikh <Neerav.Parikh@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-By: Jack Morgan<jack.morgan@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* i40e: refactor flow directorAnjali Singhai Jain2014-01-171-158/+183
| | | | | | | | | | | | | | | | | | | The i40e hardware was generating some inconsistent results when using current programming methods. This refactor fixes the inconsistencies that were preventing clean unloads of the driver, and moves the queues for handling flow director errors into their own hardware VSI. This patch also implements a corrected version of the basic ethtool add ntuple rule, which will disable the driver's automatic flow programming. A future patch adds remove/replay/list support for ntuple. Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* i40e: rename definesJesse Brandeburg2014-01-171-28/+28
| | | | | | | | | | | | The FLAG_FDIR_* defines can be renamed to be more descriptive. This patch is in preparation for the following where the fdir code is refactored. Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* i40e: whitespace fixesJesse Brandeburg2014-01-171-2/+2
| | | | | | | | | | | | Fix more whitespace issues, including making some locals declared in a nicer order. Also update Copyright string printed when the driver loads. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* i40e: Change firmware workaroundJesse Brandeburg2014-01-171-6/+2
| | | | | | | | | | | | | | Remove a workaround that is no longer necessary and implement a better understanding of what firmware is returning in the MSI-X vector count. This makes it so that the driver ends up with the right amount of queues when using all available MSI-X vectors. Change-ID: I34e60cc71dcfb1b5412f37df956fedcc49ade187 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* i40e: Retain MAC filters on port VLAN deletionGreg Rose2014-01-151-0/+3
| | | | | | | | | | | | On port VLAN deletion the list of MAC filters for the virtual function (VF) VSI were all deleted. Let's keep them around, they come in handy for keeping the VF functional. Change-Id: I335e760392f274dc8b8b40efcb708f65b49d7973 Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* i40e: Bump version numberCatherine Sullivan2014-01-141-1/+1
| | | | | | | | | | Update the driver version to 0.3.30-k. Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* i40e: whitespace fixesJesse Brandeburg2014-01-141-2/+1
| | | | | | | | | | Fix some whitespace and comment issues. Change-ID: I1587599e50ce66fd389965720e86f9e331d86643 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* i40e: associate VMDq queue with VM typeShannon Nelson2014-01-141-1/+4
| | | | | | | | | | | | | Fix a bug where the queue was not associated with the right set-up within the hardware. The fix is to use the right QTX_CTL VSI type when associating it to the VSI. Change-ID: I65ef6c5a8205601c640a6593e4b7e78d6ba45545 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* i40e: Bump versionCatherine Sullivan2014-01-101-1/+1
| | | | | | | | Update the driver version to 0.3.28-k. Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: enable PTPJacob Keller2014-01-101-1/+46
| | | | | | | | | | | | New feature: Enable PTP support in the i40e driver. Change-ID: I6a8e799f582705191f9583afb1b9231a8db96cc8 Cc: Richard Cochran <richardcochran@gmail.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Matthew Vick <matthew.vick@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: call clear_pxe after adminq is initializedShannon Nelson2014-01-101-0/+1
| | | | | | | | | | | | In the latest firmware the clear_pxe_mode function will use the AdminQ request, so call this after AdminQ is set up rather than relying on i40e_pf_reset() to clear the PXE mode. Change-ID: Ice8cba2e9cbc3c7bde0a0bcf8eaf5009abef040b Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: clear qtx_head before enabling Tx queueShannon Nelson2014-01-101-2/+4
| | | | | | | | | | | Make sure the "new" qtx_head[q] register is cleared before enabling the Tx queue. Change-ID: I0c7a12815e343a5ae68807af172a35d6c6857935 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: do not bail when disabling if Tx queue disable failsAnjali Singhai Jain2014-01-101-5/+4
| | | | | | | | | | | | | Fix a bug where the driver was erroneously exiting the driver unload path if one part of the unload failed. Instead of the original way the driver should always continue when disabling and be sure to disable all queues. Change-ID: Ib8c81c596bc87c31d8e9ca97ebf871168475279d Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: Bump versionCatherine Sullivan2014-01-101-1/+1
| | | | | | | | | Update driver version to 0.3.27-k Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: Turn flow director off in MFP modeCatherine Sullivan2014-01-091-7/+7
| | | | | | | | | | | The driver needs to set the MFP flag earlier in i40e_sw_init and then can use that flag to decide if other hardware work-arouds are required. Change-ID: Ib17ad1e3485f57b28845ab4722294a99f203bd48 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: fix spelling errorsJesse Brandeburg2014-01-091-1/+1
| | | | | | | | | This patch does s/rebuid/rebuild/. Change-ID: I77ff0c26db3d23ca5dc971b82d71b4ed8c6bcc14 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: shorten wordy fieldsMitch Williams2014-01-091-2/+2
| | | | | | | | | | | | The alloc_rx_buff_failed and alloc_rx_page_failed variables are both part of an rx specific structure so just remove the _rx part of the name. No functional changes. Change-ID: Icffa2f5d13c6f2b1e09cf45b9472b83c9dae8fc6 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
OpenPOWER on IntegriCloud