summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
Commit message (Collapse)AuthorAgeFilesLines
...
* | i40e: add switch for link pollingShannon Nelson2015-10-081-2/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's been some need for controlling the periodic link polling for debugging link issues. This patch enables switching it off and on through an ethtool private flag. The link poll remains on by default, but can be turned off with ethtool --set-priv-flags p261p1 LinkPolling off and later turned back on with ethtool --set-priv-flags p261p1 LinkPolling on To check the current status, use ethtool --show-priv-flags p261p1 Change-ID: I32e4ab654ff3eec90a06cf144899971b82d71c40 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | i40e: Fix multiple link up messagesMatt Jared2015-10-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch addresses an issue where multiple link up messages can be logged resulting from aq link status timing when link properties are changed (fc, speed, etc.); solved by using a single function to handle status printing and adding a mechanism to track whether link state (up or down) has actually changed. Change-ID: Ied6ed6e49dc397c77d992adc0bc9ed3767152b9d Signed-off-by: Matt Jared <matthew.a.jared@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | i40e: fix erroneous WARN_ONJesse Brandeburg2015-10-081-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver was issuing a WARN_ON during ring size changes because the code was cloning the rx_ring struct but not zeroing out the pointers before allocating new memory. Zero out the pointers in the cloned copy before allocating new memory for them. In this case the code was correctly avoiding memory leaks but still triggering the warning. Change-ID: I186dd493948e9b7254ab0593d4aad8b68808918d Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | i40e/i40evf: Add a stat to keep track of linearization countAnjali Singhai Jain2015-10-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | Keep track of how many times we ask the stack to linearize the skb because the HW cannot handle skbs with more than 8 frags per segment/single packet. Change-ID: If455452060963a769bbe6112cba952e79e944b52 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | i40e: fix bug in return from get_link_status and avoid spurious link messagesJesse Brandeburg2015-10-071-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, the driver could call this function and have only true/false returned, but false could mean multiple things like failure to read or link was down. This change allows the caller to get all return values in the call chain bubbled back to the source, which keeps information about failures from being lost. Also, in some unlikely scenarios, the firmware can become slow to respond to admin queue (AQ) queries for link state. Should the AQ time out, the driver can detect the state and avoid a link change when there may have been none. Change-ID: Ib2ac38407b7880750fb891b392fa77457fe6c21c Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | i40e: Never let speed get set to 0 in get_settingsCatherine Sullivan2015-10-071-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | In ethtool, there is a possibility of speed getting set to 0 if advertise is set to 0 (which it is when autoneg is disabled). We never want this to happen as the firmware will actually attempt to set the speed to 0 sending link down, so add an extra check to make sure this doesn't happen. Change-ID: I62e0eeee2cbf043d8e6f5c9c9f0b92794e877f01 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | i40e/i40evf: add driver support for new device idsShannon Nelson2015-10-071-0/+1
| | | | | | | | | | | | | | | | | | Early addition of new a device id. Change-ID: I61a8c8556fdf4f5714be4e4089689e374f30293c Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | i40e: Strip VEB stats if they are disabled in HWAnjali Singhai Jain2015-09-301-3/+6
| | | | | | | | | | | | | | | | | | | | | | Due to performance reasons, VEB stats have been disabled in the hw. This patch adds code to check for that condition before accumulating these stats. Change-ID: I7d805669476fedabb073790403703798ae5d878e Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | i40e/i40evf: add new device id 1588Shannon Nelson2015-09-301-0/+1
|/ | | | | | | | | Add new device id and support for another 20Gb device. Change-ID: Ib1b61e5bb6201d84953f97cade39a6e3369c2cf2 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: correct spelling errorMitch Williams2015-08-261-1/+1
| | | | | | | | | Turns out that 'inavlid' is an inavlid spelling for 'invalid'. Change-ID: Ie1fe2d0f8d1ba75ab880594875ec2e4152a76f61 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: Fix comment for ethtool diagnostic link testGreg Rose2015-08-261-3/+5
| | | | | | | | | | | | | The existing comment is incorrect. Add new comment to point out that the PF reset does not affect link but if the reset is changed to a different type that does affect link then the link test would need to be moved to before the reset. Change-ID: I28d786f46e9465860babdee61c1dba51016464df Reported-by: Jeremiah Kyle <jeremiah.kyle@intel.com> Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e/i40evf: Add capability to gather VEB per TC statsNeerav Parikh2015-08-261-1/+22
| | | | | | | | | | | This patch adds capability to update per VEB per TC statistics and dump it via ethtool. It also adds a structure to hold VEB per TC statistics. The fields can be filled by reading the GLVEBTC_* counters. Change-ID: I28b4759b9ab6ad5a61f046a1bc9ef6b16fe31538 Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: Fix ethtool offline diagnostic with netqueuesGreg Rose2015-08-261-2/+17
| | | | | | | | | | Treat netqueues the same way we do virtual functions when someone wants to run the ethtool offline diagnostic test. Change-ID: Id48d2b933f1fd0db7be06305a93c6ebe3dc821f5 Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: add RX to port CRC errors labelShannon Nelson2015-08-261-1/+1
| | | | | | | | | The port.crc_errors is really an RX counter, so let's mark it as such. Change-ID: I179afd3f8a95d45229bb4163a6aeb01f0d2d250b Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: use BIT and BIT_ULL macrosJesse Brandeburg2015-07-231-27/+27
| | | | | | | | | | | | | | | Use macros for abstracting (1 << foo) to BIT(foo) and (1ULL << foo64) to BIT_ULL(foo64) in order to match better with kernel requirements. NOTE: the adminq_cmd.h file was not modified on purpose because of the dependency upon firmware for that file. Change-ID: I73ee2e48c880d671948aad19bd53ca6b2ac558fc Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: clean up error status messagesShannon Nelson2015-07-231-12/+18
| | | | | | | | | | | | Clean up a little confusion in reporting error status in phy and fcoe setup error reports by separating the return status from the AQ error. Add two decoder functions to make this easier. Change-ID: I960bcdeef3978a15fec1cdb5eff781d5cbae42fb Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: only report generic filters in get_ts_infoJacob Keller2015-07-171-11/+2
| | | | | | | Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e/i40evf: Add stats to track FD ATR and SB dynamic enable stateAnjali Singhai Jain2015-07-141-0/+2
| | | | | | | | | | | | | Since the driver can dynamically enable/disable FD ATR and SB features, these stats help keep track of the current state and along with fd_flush count provide a means to debug what could be going on with the flow director filters. This will take away the need for being verbose in our debug logs with respect to FD. Change-ID: I29224f750fe6602391043655d18996570720377d Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: Remove unnecessary pf membersAnjali Singhai Jain2015-05-281-1/+1
| | | | | | | | | We can use the stat index macro directly, a variable is not required. Change-ID: I19f08ac16353dc0cd87a1a8248d714e15a54aa8a Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e/i40evf: Add stats to count Tunnel ATR hitsAnjali Singhai Jain2015-05-281-0/+1
| | | | | | | | | | Add a 3rd dynamic filter counter to track Tunneled ATR hits separately. Ethtool port stat "fdir_atr_tunnel_match" Change-ID: Idd978b6db2a462b5722397cd2ffd04ef055f8655 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: Disable offline diagnostics if VFs are enabledGreg Rose2015-05-281-0/+27
| | | | | | | | | | | | | Require the user to disable virtual functions before running the device offline diagnostics. The offline diagnostics are intended to ensure basic operation of the device - it is beyond the scope of the diagnostic test to handle the additional complexity of bringing all the virtual functions offline and then back online for each test run. Change-ID: Ic0b854851a09fc85df0c9e82c220e45885457c30 Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: Use new 40G speedsGreg Rose2015-04-141-2/+1
| | | | | | | | | | The kernel has added SPEED_40000 for ethtool. Go ahead and use the new #define. Change-ID: Ic7e16e5c9e91085afe539f11ee1b7668adc4d0ef Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: Add support to program FDir SB rules for VF from PF through ethtoolAnjali Singhai Jain2015-04-141-0/+26
| | | | | | | | | | | | | | | With this patch we can now add Flow director Sideband rules for a VF from it's PF. Here is an example on how it can be done when VF id = 5 and queue = 2: "ethtool -N ethx flow-type udp4 src-ip x.x.x.x dst-ip y.y.y.y src-port p1 dst-port p2 action 2 user-def 5" User-def specifies VF id and action specifies queue. Change-ID: Ib37d6dff3823a4d85caffde638473891c38c2b89 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e/i40evf: implement KR2 supportJesse Brandeburg2015-03-271-0/+16
| | | | | | | | | | | The new devices need a new device ID some other defines to handle the new 20G speed for KR2. Change-ID: I03f717e364afe59657e8c9ce5ffaad856b4b21df Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: add ethtool RSS supportMitch A Williams2015-03-091-0/+108
| | | | | | | | | | Add support for setting the RSS hash table and hash key through ethtool. This patch incorporates suggestions from Ben Hutchings <ben.hutchings@codethink.co.uk>. Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: tame the nvmupdate read and write complaintsShannon Nelson2015-03-091-2/+7
| | | | | | | | | | | | | | | | | The NVMUpdate tool doesn't necessarily know the ReadOnly map of the current NVM image, and must try reading and writing words that may be protected. This generates an error out of the Firmware request that the driver logs. Unfortunately, this ends up spitting out hundreds of bogus read and write error message that looks rather messy. This patch checks the error type and under normal conditions will not print the typical read and write errors during NVMUpdate. This can be overridden by enabling the NVM update debugging. This results in a much less messy log file, and likely many fewer customer support questions. Change-ID: Id4ff2e9048c523b0ff503aa5ab181b025ec948ea Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: print port stats only on partition 1Shannon Nelson2015-03-071-3/+3
| | | | | | | | | Only print the port and veb stats if this is the first partition of a multiplexed port. Change-ID: I7ce0c323cdee5cfd2e54d8bea5b0b9102987e671 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e/i40evf: Clean up some formatting and other thingsJesse Brandeburg2015-03-051-1/+1
| | | | | | | | | | Fix some double blank lines and un-split a function declaration that all fits on one line. Also make i40e_get_priv_flags static. Change-ID: I11b5d25d1153a06b286d0d2f5d916d7727c58e4a Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: Add AOC PHY types to case statementsCatherine Sullivan2015-03-051-0/+2
| | | | | | | | | | Add the 10G and 40G AOC PHY types to the case statement in get_media_type and ethtool get_settings so that the correct information gets reported back to the user. Change-ID: I1b4849d22199a9acf7c8807166d0317c1faad375 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: Fix ethtool offline testGreg Rose2015-03-051-0/+10
| | | | | | | | | | | If the system administrator is requesting an offline diagnostic test using 'ethtool -t' then we should, you know, actually take the device offline before doing the testing. Change-ID: I6afa1cbfcc821c9ab6e6f47ed4d8dc2d8dd20e82 Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: Enable more than 64 qps for the Main VSIAnjali Singhai Jain2015-03-031-4/+0
| | | | | | | | | | | | | | When running in a single TC mode the HW can be configured to enable more than max RSS qps for the Main VSI. This patch makes it possible to enable as many as num_online_cpus(). ethtool -L can still be used to reconfigure number of qps to a smaller value. Change-ID: I3e2df085276982603d86dfd79477c0ada8d30b8f Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: Add safety net for switch callingAkeem G Abodunrin2015-03-031-0/+4
| | | | | | | | This patch adds default case to handle unmatched switch calls. Change-ID: Icd203570a1dc5322c1038f68b98a83195e8ad28c Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: Use ethtool private flags to display NPAR statusGreg Rose2015-02-241-0/+41
| | | | | | | | | | | Allow an application to query the i40e driver's private flags to get the status of NPAR enablement. This will be used by applications to determine if there are NPAR specific features available. Change-ID: Ia6d9477a48f9c4cb41ca022bd433f77da3f2146c Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: Add method to keep track of current rxnfc settingsCarolyn Wyborny2015-02-241-0/+8
| | | | | | | | | | | | | | | This patch adds a struct to the VSI struct to keep track of rxnfc settings done via ethtool. Without this patch, the device can only list the options available, not the current settings and this is not clear to the user. Without current settings, the available settings never changing looks like a bug. Also update the copyright year. Change-ID: I087bbfdb33b330496a671630a7586773e3b3e589 Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e/i40evf: Use advertised speed settings in ethtool and refactor get_settingsCatherine Sullivan2015-02-241-121/+160
| | | | | | | | | | | | | | | | | | | | | | | | Add a requested speed variable to the link_status struct to store the last speeds we requested from the firmware (the speeds the FW will be advertising with if autoneg is enabled). Use the advertised speed settings in get_settings in ethtool now that we have it. Also set the requested speed settings in set_settings in ethtool as they are requested and initialize them in probe based on what the firmware remembers as the last requested speeds. To accommodate some longer lines in this new code, and improve readability I have added two functions i40e_get_settings_link_up and i40e_get_settings_link_down which get_settings now calls first. It then does all of the settings that happen regardless of link state. Some PHY types that supported the same settings were also combined. Also update the copyright year. Change-ID: Ica0c5ac81b6069ea6a7406fce7482f7816d4455c Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e/i40evf: Remove unused variable an_enable and function update_link_infoCatherine Sullivan2015-02-231-2/+2
| | | | | | | | | | | | An_enable was never used only set so lets remove it. The function update_link_info only did two things, call get_link_info and set an_enabled. Therefore we should also remove update_link_info and change all references to it to get_link_info. Change-ID: Ie3022680fa7a94bfd495a4f5fc76a73701d85569 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e/i40evf: i40e_register.h updatesAnjali Singhai Jain2015-02-231-1/+0
| | | | | | | | | | Some registers have been removed so take them out and stop updating and looking at them. Change-ID: I33da922c8de993a94dd8b8d8a2ae2146b8ca1a27 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: limit WoL and link settings to partition 1Shannon Nelson2015-01-131-1/+42
| | | | | | | | | When in multi-function mode, e.g. Dell's NPAR, only partition 1 of each MAC is allowed to set WoL, speed, and flow control. Change-ID: I87a9debc7479361c55a71f0120294ea319f23588 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: better error messages for NVM update issuesShannon Nelson2014-12-091-19/+33
| | | | | | | | | | | Add more detail to the NVM update error messages so folks have a better chance at diagnosing issues without having to resort to heroic measures to reproduce an issue. Change-ID: I270d1a9c903baceaef0bebcc55d29108ac08b0bd Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: clear NVM update state on ethtool testShannon Nelson2014-12-091-0/+3
| | | | | | | | | | | Once in a great while the NVMUpdate tools and the driver get out of phase with each other. This gives us a way to reset things without having to unload the driver. Change-ID: I353f688236249a666a90ba3e7233e0ed8c1a04e9 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: fix netdev_stat macro definitionShannon Nelson2014-12-061-1/+2
| | | | | | | | | | | | The old xxx_NETDEV_STAT() macro was defined long before the newer rtnl_link_stats64 came into being, and just never got updated. Since we're using rtnl_link_stats64 in other parts of the driver, we should use it here as well. We've just been lucky that the field definitions are the same sizes. Change-ID: I19fc71619905700235dcdf0d3c8153aec81d36de Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: don't enable PTP support on more than one PF per portJacob Keller2014-12-061-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Resolve an issue related to images with multiple PFs per physical port. We cannot fully support 1588 PTP features, since only one port should control (ie: write) the registers at a time. Doing so can cause interference of functionality. It may be possible to partially implement the API for only those features without side effects. However, this at minimum means non controlling PFs lose Tx timestamps, frequency atunement, and possibly SYSTIME adjustment. There may be further impact I did not discover. Since the API in the kernel expects these features to work, it is simpler and less dangerous to just disable PTP features on all PFs not identified as the controlling PF in PRTTSYN_CTL0.PF_ID. This change also removes the warning printed when hwtstaml IOCTL is called on the wrong PF. This is actually meaningless now, since only one PF per port will support it. In addition, the ethtool get_ts_info IOCTL was updated so that only the controlling port will even indicate support (so as not to confuse users). The overall downside is complete loss of functionality on non controlling PF, vs the possible gain of partial support. The biggest factor for choosing this approach is simplicity and ensuring that the main PF will work. There could easily be other portions of the 1588 logic with side effects I am not aware, and the reduced functionality that might be made available is significantly less useful. In addition, the API does not allow for proper indication of why particular features are not supported. These reasons are enough to decide for the simpler approach to resolving this issue. Change-ID: If4696bae686fc18aef6552b67dd417213d987c16 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: trigger SW INT with no ITR waitShannon Nelson2014-11-201-1/+4
| | | | | | | | | Since we want the SW INT to go off as soon as possible, write the extra bits that will turn off the ITR wait for the interrupt. Change-ID: I6d5382ba60840fa32abb7dea17c839eb4b5f68f7 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: Prevent link flow control settings when PFC is enabledNeerav Parikh2014-11-181-2/+12
| | | | | | | | | | | When PFC is enabled we should not proceed with setting the link flow control parameters. Also, always report the link flow Tx/Rx settings as off when PFC is enabled. Change-ID: Ib09ec58afdf0b2e587ac9d8851a5c80ad58206c4 Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Tested-By: Jack Morgan <jack.morgan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: clean up throttle rate codeJesse Brandeburg2014-11-111-7/+4
| | | | | | | | | | | | | | The interrupt throttle rate minimum is actually 2us, so fix that define and while we are there, remove some unused defines. Change some strings in the function to be a bit less wrappy, and express the correct limits. Change-ID: I96829bbc77935e0b57c6f0fc1439fb4152b2960a Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Patrick Lu <patrick.lu@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: avoid disable of interrupt when changing ITRJesse Brandeburg2014-11-031-2/+0
| | | | | | | | | | | | The call to irq_dynamic_disable was turning off the interrupt completely when trying to set ITR to 0 (for lowest moderation). Just remove the call as setting the values to 0 later in this function will suffice. Change-ID: I47caf1ecbe65653cf63ec833db93094cd83fd84d Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Patrick Lu <patrick.lu@intel.com> Tested-By: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: Add 10GBaseT supportMitch Williams2014-10-231-5/+28
| | | | | | | | | | Add driver support for 10GBaseT device. Change-ID: I4be6ed847ac0bddd220b9878a95c523b32038174 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: Tell OS link is going down when calling set_phy_configCatherine Sullivan2014-09-041-3/+18
| | | | | | | | | | | | | | | Since we don't seem to be getting an LSE telling us link is going down during set_phy_config (but we do get an LSE telling us we are coming back up), fake one for the OS and tell them link is going down. Also do an atomic restart no matter what because there are times the user may want to end with link up even if they started with link down (like if they accidentally set it to a speed that can't link and are trying to fix it). Change-ID: I0a642af9c1d0feb67bce741aba1a9c33bd349ed6 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: Allow user to change link settings if link is downCatherine Sullivan2014-09-041-1/+2
| | | | | | | | | | Allow the user to change auto-negotiation and speed settings if link is down. Change-ID: I372967c627682b5e1835f623a7cbf41b21b51043 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: Add dual speed module supportCatherine Sullivan2014-09-041-20/+11
| | | | | | | | | | | | Now that fw has implemented dual speed module support, we can add ours. Also, add the phy type for 1G LR/SR and set its media type to fiber. Lastly, instead of a WARN_ON if the phy type is not recognized just print a warning. Change-ID: I2e5227d4a8c2907b0ed423038e5dbce774e466b0 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
OpenPOWER on IntegriCloud