summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/amd
Commit message (Collapse)AuthorAgeFilesLines
* amd-xgbe: Enable/disable PFC per traffic classLendacky, Thomas2016-02-171-2/+34
| | | | | | | | | | Currently the PFC flow control is enabled on all traffic classes if one or more traffic classes request it. The PFC enable setting of the traffic class should be used to determine whether to enable or disable flow control for the traffic class. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* amd-xgbe: Verify forced speed matches the active speedsetLendacky, Thomas2016-02-171-2/+14
| | | | | | | | When using ethtool to set the speed for the device, verify that the specified speed is valid within the active speedset. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* amd-xgbe: Use __napi_schedule_irqoffLendacky, Thomas2016-02-171-2/+2
| | | | | | | | | Change from calling __napi_schedule to __napi_schedule_irqoff when running in interrupt context or when called by netpoll with interrupts already disabled. The Tx timer function will continue to use __napi_schedule. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* amd-xgbe: Change from napi_complete to napi_complete_doneLendacky, Thomas2016-02-171-4/+4
| | | | | | | | Change from using napi_complete to napi_complete_done to allow for the use of gro_flush_timeout in tuning network processing. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* amd-xgbe: Disable VLAN filtering when in promiscuous modeLendacky, Thomas2016-02-171-112/+117
| | | | | | | | | | | | | When the hardware is placed in promiscuous mode it will still perform VLAN filtering and therefore may not pass all packets to the driver. Disable all VLAN filtering when entering promiscuous mode and restore VLAN filtering upon exit from promiscuous mode. In order to avoid adding forward declarations, move the VLAN related functions earlier in the file. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: rework setup_tc ndo op to consume general tc operandJohn Fastabend2016-02-171-3/+6
| | | | | | | | | | | | | | | This patch updates setup_tc so we can pass additional parameters into the ndo op in a generic way. To do this we provide structured union and type flag. This lets each classifier and qdisc provide its own set of attributes without having to add new ndo ops or grow the signature of the callback. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: rework ndo tc op to consume additional qdisc handle parameterJohn Fastabend2016-02-171-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | The ndo_setup_tc() op was added to support drivers offloading tx qdiscs however only support for mqprio was ever added. So we only ever added support for passing the number of traffic classes to the driver. This patch generalizes the ndo_setup_tc op so that a handle can be provided to indicate if the offload is for ingress or egress or potentially even child qdiscs. CC: Murali Karicheri <m-karicheri2@ti.com> CC: Shradha Shah <sshah@solarflare.com> CC: Or Gerlitz <ogerlitz@mellanox.com> CC: Ariel Elior <ariel.elior@qlogic.com> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Bruce Allan <bruce.w.allan@intel.com> CC: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethernet: amd: au1000: Remove pointless warningAndrew Lunn2016-01-101-3/+0
| | | | | | | | | | The warning about being able to read any MDIO device, not just the attached ethernet devices PHY applies to all MDIO drivers. So remove it. This also removes a reference to a member in phy_device which has moved. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: Add API for {un}registering an mdio device to a bus.Andrew Lunn2016-01-071-4/+5
| | | | | | | | | | Rather than have drivers directly manipulate the mii_bus structure, provide and API for registering and unregistering devices on an MDIO bus, and performing lookups. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mdio: Move allocation of interrupts into coreAndrew Lunn2016-01-071-7/+0
| | | | | | | | | | Have mdio_alloc() create the array of interrupt numbers, and initialize it to POLLING. This is what most MDIO drivers want, so allowing code to be removed from the drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: Centralise print about attached phyAndrew Lunn2016-01-071-3/+1
| | | | | | | | | | Many Ethernet drivers contain the same netdev_info() print statement about the attached phy. Move it into the phy device code. Additionally add a varargs function which can be used to append additional information. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: add phydev_name() wrapperAndrew Lunn2016-01-071-2/+2
| | | | | | | | Add a phydev_name() function, to help with moving some structure members from phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-12-171-2/+2
|\ | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/geneve.c Here we had an overlapping change, where in 'net' the extraneous stats bump was being removed whilst in 'net-next' the final argument to udp_tunnel6_xmit_skb() was being changed. Signed-off-by: David S. Miller <davem@davemloft.net>
| * amd-xgbe: fix a couple timeout loopsDan Carpenter2015-12-151-2/+2
| | | | | | | | | | | | | | | | | | | | At the end of the loop we test "if (!count)" but because "count--" is a post-op then the loop will end with count set to -1. I have fixed this by changing it to --count. Fixes: c5aa9e3b8156 ('amd-xgbe: Initial AMD 10GbE platform driver') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-12-031-2/+3
|\ \ | |/ | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/renesas/ravb_main.c kernel/bpf/syscall.c net/ipv4/ipmr.c All three conflicts were cases of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * various: fix pci_set_dma_mask return value checkingChristoph Hellwig2015-11-201-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | pci_set_dma_mask returns a negative errno value, not a bool like pci_dma_supported. This of course was just a giant test for attention :) Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Jongman Heo <jongman.heo@samsung.com> Tested-by: Jongman Heo <jongman.heo@samsung.com> [pcnet32] Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | net: move skb_mark_napi_id() into core networking stackEric Dumazet2015-11-181-1/+0
|/ | | | | | | | | | | | | | | | We would like to automatically provide busy polling support to all NAPI drivers, without them having to implement anything. skb_mark_napi_id() can be called from napi_gro_receive() and napi_get_frags(). Few drivers are still calling skb_mark_napi_id() because they use netif_receive_skb(). They should eventually call napi_gro_receive() instead. I will leave this to drivers maintainers. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'pm+acpi-4.4-rc1-2' of ↵Linus Torvalds2015-11-121-1/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management and ACPI updates from Rafael Wysocki: "The only new feature in this batch is support for the ACPI _CCA device configuration object, which it a pre-requisite for future ACPI PCI support on ARM64, but should not affect the other architectures. The rest is fixes and cleanups, mostly in cpufreq (including intel_pstate), the Operating Performace Points (OPP) framework and tools (cpupower and turbostat). Specifics: - Support for the ACPI _CCA configuration object intended to tell the OS whether or not a bus master device supports hardware managed cache coherency and a new set of functions to allow drivers to check the cache coherency support for devices in a platform firmware interface agnostic way (Suravee Suthikulpanit, Jeremy Linton). - ACPI backlight quirks for ESPRIMO Mobile M9410 and Dell XPS L421X (Aaron Lu, Hans de Goede). - Fixes for the arm_big_little and s5pv210-cpufreq cpufreq drivers (Jon Medhurst, Nicolas Pitre). - kfree()-related fixup for the recently introduced CPPC cpufreq frontend (Markus Elfring). - intel_pstate fix reducing kernel log noise on systems where P-states are managed by hardware (Prarit Bhargava). - intel_pstate maintainers information update (Srinivas Pandruvada). - cpufreq core optimization related to the handling of delayed work items used by governors (Viresh Kumar). - Locking fixes and cleanups of the Operating Performance Points (OPP) framework (Viresh Kumar). - Generic power domains framework cleanups (Lina Iyer). - cpupower tool updates (Jacob Tanenbaum, Sriram Raghunathan, Thomas Renninger). - turbostat tool updates (Len Brown)" * tag 'pm+acpi-4.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) PCI: ACPI: Add support for PCI device DMA coherency PCI: OF: Move of_pci_dma_configure() to pci_dma_configure() of/pci: Fix pci_get_host_bridge_device leak device property: ACPI: Remove unused DMA APIs device property: ACPI: Make use of the new DMA Attribute APIs device property: Adding DMA Attribute APIs for Generic Devices ACPI: Adding DMA Attribute APIs for ACPI Device device property: Introducing enum dev_dma_attr ACPI: Honor ACPI _CCA attribute setting cpufreq: CPPC: Delete an unnecessary check before the function call kfree() PM / OPP: Add opp_rcu_lockdep_assert() to _find_device_opp() PM / OPP: Hold dev_opp_list_lock for writers PM / OPP: Protect updates to list_dev with mutex PM / OPP: Propagate error properly from dev_pm_opp_set_sharing_cpus() cpufreq: s5pv210-cpufreq: fix wrong do_div() usage MAINTAINERS: update for intel P-state driver Creating a common structure initialization pattern for struct option cpupower: Enable disabled Cstates if they are below max latency cpupower: Remove debug message when using cpupower idle-set -D switch cpupower: cpupower monitor reports uninitialized values for offline cpus ...
| * Merge branch 'acpi-pci'Rafael J. Wysocki2015-11-071-1/+7
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * acpi-pci: PCI: ACPI: Add support for PCI device DMA coherency PCI: OF: Move of_pci_dma_configure() to pci_dma_configure() of/pci: Fix pci_get_host_bridge_device leak device property: ACPI: Remove unused DMA APIs device property: ACPI: Make use of the new DMA Attribute APIs device property: Adding DMA Attribute APIs for Generic Devices ACPI: Adding DMA Attribute APIs for ACPI Device device property: Introducing enum dev_dma_attr ACPI: Honor ACPI _CCA attribute setting Conflicts: drivers/crypto/ccp/ccp-platform.c
| | * device property: ACPI: Make use of the new DMA Attribute APIsSuthikulpanit, Suravee2015-11-071-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we have the new DMA attribute APIs, we can replace the older acpi_check_dma() and device_dma_is_coherent(). Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | | pcnet32: use pci_set_dma_mask insted of pci_dma_supportedChristoph Hellwig2015-11-101-1/+1
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All drivers should be using dma_set_mask / pci_set_dma_mask to try to set the dma mask instead of just querying it. Without that some iommu implementations may not work. pci_dma_supported is removed entirely, but dma_supported stays for dma_ops implementations for now. This patch (of 15): This ensures the dma mask that is supported by the driver is recorded in the device structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Don Fry <pcnet32@frontier.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Alexandre Courbot <acourbot@nvidia.com> Cc: Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: David Airlie <airlied@linux.ie> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Helge Deller <deller@gmx.de> Cc: Jiri Slaby <jslaby@suse.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Pawel Osciak <pawel@osciak.com> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Sergey Kozlov <serjk@netup.ru> Cc: Shradha Shah <sshah@solarflare.com> Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com> Cc: Steven Toth <stoth@kernellabs.com> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-11-012-1/+5
|\ \
| * | amd-xgbe: Fix race between access of desc and desc indexLendacky, Thomas2015-10-272-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During Tx cleanup it's still possible for the descriptor data to be read ahead of the descriptor index. A memory barrier is required between the read of the descriptor index and the start of the Tx cleanup loop. This allows a change to a lighter-weight barrier in the Tx transmit routine just before updating the current descriptor index. Since the memory barrier does result in extra overhead on arm64, keep the previous change to not chase the current descriptor value. This prevents the execution of the barrier for each loop performed. Suggested-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-10-242-2/+4
|\ \ \ | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: net/ipv6/xfrm6_output.c net/openvswitch/flow_netlink.c net/openvswitch/vport-gre.c net/openvswitch/vport-vxlan.c net/openvswitch/vport.c net/openvswitch/vport.h The openvswitch conflicts were overlapping changes. One was the egress tunnel info fix in 'net' and the other was the vport ->send() op simplification in 'net-next'. The xfrm6_output.c conflicts was also a simplification overlapping a bug fix. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | amd-xgbe: Use wmb before updating current descriptor countLendacky, Thomas2015-10-232-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The code currently uses the lightweight dma_wmb barrier before updating the current descriptor count. Under heavy load, the Tx cleanup routine was seeing the updated current descriptor count before the updated descriptor information. As a result, the Tx descriptor was being cleaned up before it was used because it was not "owned" by the hardware yet, resulting in a Tx queue hang. Using the wmb barrier insures that the descriptor is updated before the descriptor counter preventing the Tx queue hang. For extra insurance, the Tx cleanup routine is changed to grab the current decriptor count on entry and uses that initial value in the processing loop rather than trying to chase the current value. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-10-201-0/+4
|\ \ \ | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/usb/asix_common.c net/ipv4/inet_connection_sock.c net/switchdev/switchdev.c In the inet_connection_sock.c case the request socket hashing scheme is completely different in net-next. The other two conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | amd-xgbe: Check for successful buffer allocation before useTom Lendacky2015-10-051-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | The kasprintf function can return NULL if the allocation fails. Check for successful allocation before attempting to use the returned buffer. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | amd-xgbe: fix potential memory leak in xgbe-debugfsGeliang Tang2015-10-051-0/+1
| |/ | | | | | | | | | | | | | | Added kfree() to avoid the memory leak when debugfs_create_dir() fails. Signed-off-by: Geliang Tang <geliangtang@163.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | drivers/net: get rid of unnecessary initializations in .get_drvinfo()Ivan Vecera2015-10-162-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | Many drivers initialize uselessly n_priv_flags, n_stats, testinfo_len, eedump_len & regdump_len fields in their .get_drvinfo() ethtool op. It's not necessary as these fields is filled in ethtool_get_drvinfo(). v2: removed unused variable v3: removed another unused variable Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | amd-xgbe: Use system workqueue for device restartLendacky, Thomas2015-10-151-2/+2
| | | | | | | | | | | | | | | | | | | | | | A previous patch switched from using the system workqueue to the device workqueue for various operations. During a device restart the device workqueue is flushed so the restart cannot use this workqueue or else a deadlock results. Move the device restart back to using the system workqueue. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | amd-xgbe: Remove the XGBE_LINK state bitLendacky, Thomas2015-10-052-13/+4
| | | | | | | | | | | | | | | | | | | | The XGBE_LINK bit is used just to determine whether to call the netif_carrier_on/off functions. Rather than define and use this bit, just call the functions. The netif_carrier_ok function can be used in place of checking the XGBE_LINK bit in the future. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | amd-xgbe: Use device workqueue instead of system workqueueLendacky, Thomas2015-10-051-5/+6
| | | | | | | | | | | | | | | | | | The driver creates, flushes and destroys a device workqueue but queues work to the system workqueue. Switch from using the system workqueue to the device workqueue. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | amd-xgbe: Add receive buffer unavailable statisticLendacky, Thomas2015-10-053-0/+5
| | | | | | | | | | | | | | | | | | Add a statistic that tracks how many times an interrupt is generated for a receive buffer not being available to the hardware which prevents the hardware from being able to DMA the received data. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | amd-xgbe: Simplify calculation and setting of queue fifosLendacky, Thomas2015-10-052-83/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | The calculation of the Tx and Rx fifo sizes can be calculated rather than hardcoded in a switch statement. Additionally, the per-queue fifo sizes can be calculated rather than hardcoded using if/else if statements that can possibly underutilize the available fifo area. Change the code to calculate the fifo sizes and the per-queue fifo sizes to simplify the code and make best use of the available fifo. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | amd-xgbe: Add ethtool error and debug messagesLendacky, Thomas2015-10-051-52/+37
| | | | | | | | | | | | | | | | | | Add error and dynamic debug messages to various ethtool functions in the driver while also removing the DBGPR debug print calls. Also, change the message level for some error messages from alert to err. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | amd-xgbe: Add ethtool support for setting the msglevelLendacky, Thomas2015-10-051-0/+16
| | | | | | | | | | | | | | | | Provide the ethtool functions to support getting and setting the msglevel for the driver. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | amd-xgbe: Use proper DT / ACPI precedence checkingLendacky, Thomas2015-10-051-1/+1
| | | | | | | | | | | | | | | | | | Device tree presence takes precedence over ACPI in the device_* APIs. The amd-xgbe driver should follow the same precedence. Update the check on whether to use DT / ACPI to follow this. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | amd-xgbe: Remove an unneeded semicolon on a switch statementLendacky, Thomas2015-10-051-1/+1
| | | | | | | | | | | | | | | | Remove an unneeded semicolon at the end of a switch statement block. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: hplance: Allow modular buildGeert Uytterhoeven2015-09-291-1/+1
| | | | | | | | | | Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: 7990: Export lance_poll() to modulesGeert Uytterhoeven2015-09-291-0/+1
|/ | | | | | | | | | | If CONFIG_HPLANCE=m and CONFIG_NET_POLL_CONTROLLER=y: ERROR: "lance_poll" [drivers/net/ethernet/amd/hplance.ko] undefined! Add the missing export to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* treewide: fix typos in comment blocksMasahiro Yamada2015-08-071-1/+1
| | | | | | | Looks like the word "contiguous" is often mistyped. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
* amd-xgbe: Fix DMA API debug warningLendacky, Thomas2015-07-084-12/+22
| | | | | | | | | | | | | | | | When running a kernel configured with CONFIG_DMA_API_DEBUG=y a warning is issued: DMA-API: device driver tries to sync DMA memory it has not allocated This warning is the result of mapping the full range of the Rx buffer pages allocated and then performing a dma_sync_single_for_cpu against a calculated DMA address. The proper thing to do is to use the dma_sync_single_range_for_cpu with a base DMA address and an offset. Reported-by: Kim Phillips <kim.phillips@arm.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Kim Phillips <kim.phillips@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* amd-xgbe: Add the __GFP_NOWARN flag to Rx buffer allocationTom Lendacky2015-06-291-1/+1
| | | | | | | | | | | | | When allocating Rx related buffers, alloc_pages is called using an order number that is decreased until successful. A system under stress can experience failures during this allocation process resulting in a warning being issued. This message can be of concern to end users even though the failure is not fatal. Since the failure is not fatal and can occur multiple times, the driver should include the __GFP_NOWARN flag to suppress the warning message from being issued. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2015-06-2410-540/+2158
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: 1) Add TX fast path in mac80211, from Johannes Berg. 2) Add TSO/GRO support to ibmveth, from Thomas Falcon 3) Move away from cached routes in ipv6, just like ipv4, from Martin KaFai Lau. 4) Lots of new rhashtable tests, from Thomas Graf. 5) Run ingress qdisc lockless, from Alexei Starovoitov. 6) Allow servers to fetch TCP packet headers for SYN packets of new connections, for fingerprinting. From Eric Dumazet. 7) Add mode parameter to pktgen, for testing receive. From Alexei Starovoitov. 8) Cache access optimizations via simplifications of build_skb(), from Alexander Duyck. 9) Move page frag allocator under mm/, also from Alexander. 10) Add xmit_more support to hv_netvsc, from KY Srinivasan. 11) Add a counter guard in case we try to perform endless reclassify loops in the packet scheduler. 12) Extern flow dissector to be programmable and use it in new "Flower" classifier. From Jiri Pirko. 13) AF_PACKET fanout rollover fixes, performance improvements, and new statistics. From Willem de Bruijn. 14) Add netdev driver for GENEVE tunnels, from John W Linville. 15) Add ingress netfilter hooks and filtering, from Pablo Neira Ayuso. 16) Fix handling of epoll edge triggers in TCP, from Eric Dumazet. 17) Add an ECN retry fallback for the initial TCP handshake, from Daniel Borkmann. 18) Add tail call support to BPF, from Alexei Starovoitov. 19) Add several pktgen helper scripts, from Jesper Dangaard Brouer. 20) Add zerocopy support to AF_UNIX, from Hannes Frederic Sowa. 21) Favor even port numbers for allocation to connect() requests, and odd port numbers for bind(0), in an effort to help avoid ip_local_port_range exhaustion. From Eric Dumazet. 22) Add Cavium ThunderX driver, from Sunil Goutham. 23) Allow bpf programs to access skb_iif and dev->ifindex SKB metadata, from Alexei Starovoitov. 24) Add support for T6 chips in cxgb4vf driver, from Hariprasad Shenai. 25) Double TCP Small Queues default to 256K to accomodate situations like the XEN driver and wireless aggregation. From Wei Liu. 26) Add more entropy inputs to flow dissector, from Tom Herbert. 27) Add CDG congestion control algorithm to TCP, from Kenneth Klette Jonassen. 28) Convert ipset over to RCU locking, from Jozsef Kadlecsik. 29) Track and act upon link status of ipv4 route nexthops, from Andy Gospodarek. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1670 commits) bridge: vlan: flush the dynamically learned entries on port vlan delete bridge: multicast: add a comment to br_port_state_selection about blocking state net: inet_diag: export IPV6_V6ONLY sockopt stmmac: troubleshoot unexpected bits in des0 & des1 net: ipv4 sysctl option to ignore routes when nexthop link is down net: track link-status of ipv4 nexthops net: switchdev: ignore unsupported bridge flags net: Cavium: Fix MAC address setting in shutdown state drivers: net: xgene: fix for ACPI support without ACPI ip: report the original address of ICMP messages net/mlx5e: Prefetch skb data on RX net/mlx5e: Pop cq outside mlx5e_get_cqe net/mlx5e: Remove mlx5e_cq.sqrq back-pointer net/mlx5e: Remove extra spaces net/mlx5e: Avoid TX CQE generation if more xmit packets expected net/mlx5e: Avoid redundant dev_kfree_skb() upon NOP completion net/mlx5e: Remove re-assignment of wq type in mlx5e_enable_rq() net/mlx5e: Use skb_shinfo(skb)->gso_segs rather than counting them net/mlx5e: Static mapping of netdev priv resources to/from netdev TX queues net/mlx4_en: Use HW counters for rx/tx bytes/packets in PF device ...
| * drivers/net: remove all references to obsolete Ethernet-HOWTOPaul Gortmaker2015-06-231-11/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This howto made sense in the 1990s when users had to manually configure ISA cards with jumpers or vendor utilities, but with the implementation of PCI it became increasingly less and less relevant, to the point where it has been well over a decade since I last updated it. And there is no value in anyone else taking over updating it either. However the references to it continue to spread as boiler plate text from one Kconfig file into the next. We are not doing end users any favours by pointing them at this old document, so lets kill it with fire, once and for all, to hopefully stop any further spread. No code is changed in this commit, just Kconfig help text. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-06-081-1/+1
| |\
| * | amd-xgbe: Add more netif_dbg output to the driverLendacky, Thomas2015-05-251-6/+62
| | | | | | | | | | | | | | | | | | | | | | | | Change more netdev_dbg statements over to netif_dbg and add some new netif_dbg statements to the driver. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | amd-xgbe: Fix initial mode when auto-negotiation is disabledLendacky, Thomas2015-05-251-3/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the ethtool command is used to set the speed of the device while the device is down, the check to set the initial mode may fail when the device is brought up, causing failure to bring the device up. Update the code to set the initial mode based on the desired speed if auto-negotiation is disabled. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | amd-xgbe: Add setting of a missing hardware featureLendacky, Thomas2015-05-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The device private data structure contains all the defined hardware features for the device. However one of the features is not set. Even though the feature is not currently used, set it to avoid future issues of the feature being checked thinking it has been properly set. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | amd-xgbe: Remove manual check and set of dma_mask pointerLendacky, Thomas2015-05-151-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The underlying device support will set the device dma_mask pointer if DMA is set up properly for the device. Remove the check for and assignment of dma_mask when it is null. Instead, just error out if the dma_set_mask_and_coherent function fails because dma_mask is null. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud