summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/mtdconcat.c
Commit message (Collapse)AuthorAgeFilesLines
* mtd: do not use mtd->block_markbad directlyArtem Bityutskiy2012-01-091-1/+1
| | | | | | | | Instead, use the new 'mtd_can_have_bb()', or just rely on 'mtd_block_markbad()' return code, which will be -EOPNOTSUPP if bad blocks are not supported. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: introduce mtd_can_have_bb helperArtem Bityutskiy2012-01-091-1/+1
| | | | | | | | | This patch introduces new 'mtd_can_have_bb()' helper function which checks whether the flash can have bad eraseblocks. Then it changes all the direct 'mtd->block_isbad' use cases with 'mtd_can_have_bb()'. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: do not use mtd->lock, unlock and is_locked directlyArtem Bityutskiy2012-01-091-12/+6
| | | | | | | | Instead, call the corresponding MTD API function which will return '-EOPNOTSUPP' if the operation is not supported. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: do not use mtd->get_unmapped_area directlyArtem Bityutskiy2012-01-091-5/+1
| | | | | | | | | Remove direct usage of mtd->get_unmapped_area. Instead, just call 'mtd_get_unmapped_area()' which will return -EOPNOTSUPP if the function is not implemented and test for this error code. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: introduce mtd_block_markbad interfaceArtem Bityutskiy2012-01-091-1/+1
| | | | | Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: introduce mtd_block_isbad interfaceArtem Bityutskiy2012-01-091-1/+1
| | | | | Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: introduce mtd_resume interfaceArtem Bityutskiy2012-01-091-1/+1
| | | | | Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: introduce mtd_suspend interfaceArtem Bityutskiy2012-01-091-1/+1
| | | | | Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: introduce mtd_unlock interfaceArtem Bityutskiy2012-01-091-1/+1
| | | | | Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: introduce mtd_lock interfaceArtem Bityutskiy2012-01-091-1/+1
| | | | | Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: introduce mtd_sync interfaceArtem Bityutskiy2012-01-091-1/+1
| | | | | Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: introduce mtd_writev interfaceArtem Bityutskiy2012-01-091-2/+3
| | | | | Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: introduce mtd_write_oob interfaceArtem Bityutskiy2012-01-091-1/+1
| | | | | Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: introduce mtd_read_oob interfaceArtem Bityutskiy2012-01-091-1/+1
| | | | | Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: introduce mtd_write interfaceArtem Bityutskiy2012-01-091-1/+1
| | | | | Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: introduce mtd_read interfaceArtem Bityutskiy2012-01-091-1/+1
| | | | | Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: introduce mtd_get_unmapped_area interfaceArtem Bityutskiy2012-01-091-2/+2
| | | | | Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: introduce mtd_erase interfaceArtem Bityutskiy2012-01-091-1/+1
| | | | | | | | | | | | | | | | | | | This patch is part of a patch-set which changes the MTD interface from 'mtd->func()' form to 'mtd_func()' form. We need this because we want to add common code to to all drivers in the mtd core level, which is impossible with the current interface when MTD clients call driver functions like 'read()' or 'write()' directly. At this point we just introduce a new inline wrapper function, but later some of them are expected to gain more code. E.g., the input parameters check should be moved to the wrappers rather than be duplicated at many drivers. This particular patch introduced the 'mtd_erase()' interface. The following patches add all the other interfaces one by one. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: utilize `mtd_is_*()' functionsBrian Norris2011-09-211-4/+4
| | | | | Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
* mtd: spelling fixesBrian Norris2011-09-111-1/+1
| | | | | Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
* mtd: mtdconcat: fix NAND OOB writeFelix Radensky2011-05-251-2/+2
| | | | | | | | | | | Currently mtdconcat is broken for NAND. An attemtpt to create JFFS2 filesystem on concatenation of several NAND devices fails with OOB write errors. This patch fixes that problem. Signed-off-by: Felix Radensky <felix@embedded-sol.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: stable@kernel.org Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: adapt writebufsize calculation for concatHolger Brunck2011-03-111-1/+7
| | | | | | | | | | | If different chips with different writebufsize are concatenated, the writebufsize from the concat device has to be taken from the device with the largest writebuffer. This writebufsize is used later on in the UBI layer for the min I/O size. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: initialize writebufsize in the MTD object of a partitionAnatolij Gustschin2011-01-061-0/+1
| | | | | | | | | | | | | | Propagate the writebufsize to the partition's MTD object so that UBI can set correct value for it's minimal I/O size using the writebufsize field of MTD object of the partition. By previous patches we added proper writebufsize field initialization. Next patch can now change UBI to use this field for setting the minimal I/O size. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: Update copyright noticesDavid Woodhouse2010-08-081-2/+16
| | | | Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* mtd: mtdconcat: fix bug with uninitialized lock and unlock functionsMartin Krause2010-08-021-8/+12
| | | | | | | | | | | Test if a lock or unlock function is present (pointer not NULL) before calling it, to prevent a kernel dump. Artem: removed extra blank lines Signed-off-by: Martin Krause <martin.krause@tqs.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* drivers/mtd: Use kmemdupJulia Lawall2010-05-151-2/+1
| | | | | | | | | | | | | | | | | | | | | | | Use kmemdup when some other buffer is immediately copied into the allocated region. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; statement S; @@ - to = \(kmalloc\|kzalloc\)(size,flag); + to = kmemdup(from,size,flag); if (to==NULL || ...) S - memcpy(to, from, size); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: mtdconcat: prevent a read from eraseregions[-1]Roel Kluin2009-09-191-3/+3
| | | | | | | | | If the erase region was found in the first iteration we read from eraseregions[-1] Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* NOMMU: Add support for direct mapping through mtdconcat if possibleDavid Howells2009-03-241-0/+47
| | | | | | | | | | | | | | | | | | | Add support for direct mapping through mtdconcat, if possible, by attaching the samebacking_dev_info structure to the master. It has some restrictions: (1) It won't permit direct mapping of concatenated devices that have differing BDIs. (2) It doesn't support maps that span the 'gap' between devices, although it possibly could if the devices spanned across return compatible (ie. contiguous) addresses from their get_unmapped_area() ops. Signed-off-by: Gavin Lambert <gavinl@compacsort.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Bernd Schmidt <bernd.schmidt@analog.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers2008-12-231-1/+1
| | | | | | Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] Remove more strange u_intxx_t typesDavid Woodhouse2008-12-101-1/+1
| | | | Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] update internal API to support 64-bit device sizeAdrian Hunter2008-12-101-14/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | MTD internal API presently uses 32-bit values to represent device size. This patch updates them to 64-bits but leaves the external API unchanged. Extending the external API is a separate issue for several reasons. First, no one needs it at the moment. Secondly, whether the implementation is done with IOCTLs, sysfs or both is still debated. Thirdly external API changes require the internal API to be accepted first. Note that although the MTD API will be able to support 64-bit device sizes, existing drivers do not and are not required to do so, although NAND base has been updated. In general, changing from 32-bit to 64-bit values cause little or no changes to the majority of the code with the following exceptions: - printk message formats - division and modulus of 64-bit values - NAND base support - 32-bit local variables used by mtdpart and mtdconcat - naughtily assuming one structure maps to another in MEMERASE ioctl Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] Define and use MTD_FAIL_ADDR_UNKNOWN instead of 0xffffffffAdrian Hunter2008-08-121-2/+2
| | | | | Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* MTD/JFFS2: remove CVS keywordsAdrian Bunk2008-06-041-2/+0
| | | | | | | | | | | | Once upon a time, the MTD repository was using CVS. This patch therefore removes all usages of the no longer updated CVS keywords from the MTD code. This also includes code that printed them to the user. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] fix mtdconcat for subpage-write NANDChris Paulson-Ellis2007-10-141-0/+1
| | | | | | | | This allows the mtdconcat driver to work with NAND flash devices that support sub-page writes. Signed-off-by: Chris Paulson-Ellis <chris@edesix.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] Fix do_div() type warning in mtdconcatDavid Woodhouse2007-07-231-1/+1
| | | | | | It expects a uint64_t; give it one. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] [NAND] make oobavail publicVitaly Wool2007-03-081-0/+1
| | | | | | | | | | | During the MTD rework the oobavail parameter of mtd_info structure has become private. This is not quite correct in terms of integrity and logic. If we have means to write to OOB area, then we'd like to know upfront how many bytes out of OOB are spare per page to be able to adapt to specific cases. The patch inlined adds the public oobavail parameter. Signed-off-by: Vitaly Wool <vwool@ru.mvista.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] remove unused ecctype,eccsize fields from struct mtd_infoArtem Bityutskiy2007-02-091-4/+0
| | | | | | | | | | | | Remove unused and broken mtd->ecctype and mtd->eccsize fields from struct mtd_info. Do not remove them from userspace API data structures (don't want to breake userspace) but mark them as obsolete by a comment. Any userspace program which uses them should be half-broken anyway, so this is more about saving data structure size. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] NAND: add subpage write supportThomas Gleixner2006-11-291-0/+1
| | | | | | | Many SLC NANDs support up to 4 writes at one NAND page. Add support of this feature. Signed-off-by: Artem Bityutskiy <dedekind@infradead.org>
* [MTD] replace kmalloc+memset with kzallocBurman Yan2006-11-281-2/+1
| | | | | Signed-off-by: Yan Burman <yan_952@hotmail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] [NAND] remove len/ooblen confusion.Vitaly Wool2006-11-281-15/+24
| | | | | | | | | | | | | | | | | | | | As was discussed between Ricard Wanderlöf, David Woodhouse, Artem Bityutskiy and me, the current API for reading/writing OOB is confusing. The thing that introduces confusion is the need to specify ops.len together with ops.ooblen for reads/writes that concern only OOB not data area. So, ops.len is overloaded: when ops.datbuf != NULL it serves to specify the length of the data read, and when ops.datbuf == NULL, it serves to specify the full OOB read length. The patch inlined below is the slightly updated version of the previous patch serving the same purpose, but with the new Artem's comments taken into account. Artem, BTW, thanks a lot for your valuable input! Signed-off-by: Vitaly Wool <vwool@ru.mvista.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] NAND Expose the new raw mode function and status info to userspaceThomas Gleixner2006-05-301-16/+35
| | | | | | | | | | | The raw read/write access to NAND (without ECC) has been changed in the NAND rework. Expose the new way - setting the file mode via ioctl - to userspace. Also allow to read out the ecc statistics information so userspace tools can see that bitflips happened and whether errors where correctable or not. Also expose the number of bad blocks for the partition, so nandwrite can check if the data fits into the parition before writing to it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* [MTD] NAND Signal that a bitflip was corrected by ECCThomas Gleixner2006-05-291-3/+12
| | | | | | | | Return -EUCLEAN on read when a bitflip was detected and corrected, so the clients can react and eventually copy the affected block to a spare one. Make all in kernel users aware of the change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* [MTD] Rework the out of band handling completelyThomas Gleixner2006-05-291-53/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hopefully the last iteration on this! The handling of out of band data on NAND was accompanied by tons of fruitless discussions and halfarsed patches to make it work for a particular problem. Sufficiently annoyed by I all those "I know it better" mails and the resonable amount of discarded "it solves my problem" patches, I finally decided to go for the big rework. After removing the _ecc variants of mtd read/write functions the solution to satisfy the various requirements was to refactor the read/write _oob functions in mtd. The major change is that read/write_oob now takes a pointer to an operation descriptor structure "struct mtd_oob_ops".instead of having a function with at least seven arguments. read/write_oob which should probably renamed to a more descriptive name, can do the following tasks: - read/write out of band data - read/write data content and out of band data - read/write raw data content and out of band data (ecc disabled) struct mtd_oob_ops has a mode field, which determines the oob handling mode. Aside of the MTD_OOB_RAW mode, which is intended to be especially for diagnostic purposes and some internal functions e.g. bad block table creation, the other two modes are for mtd clients: MTD_OOB_PLACE puts/gets the given oob data exactly to/from the place which is described by the ooboffs and ooblen fields of the mtd_oob_ops strcuture. It's up to the caller to make sure that the byte positions are not used by the ECC placement algorithms. MTD_OOB_AUTO puts/gets the given oob data automaticaly to/from the places in the out of band area which are described by the oobfree tuples in the ecclayout data structre which is associated to the devicee. The decision whether data plus oob or oob only handling is done depends on the setting of the datbuf member of the data structure. When datbuf == NULL then the internal read/write_oob functions are selected, otherwise the read/write data routines are invoked. Tested on a few platforms with all variants. Please be aware of possible regressions for your particular device / application scenario Disclaimer: Any whining will be ignored from those who just contributed "hot air blurb" and never sat down to tackle the underlying problem of the mess in the NAND driver grown over time and the big chunk of work to fix up the existing users. The problem was not the holiness of the existing MTD interfaces. The problems was the lack of time to go for the big overhaul. It's easy to add more mess to the existing one, but it takes alot of effort to go for a real solution. Improvements and bugfixes are welcome! Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* [MTD] NAND Replace oobinfo by ecclayoutThomas Gleixner2006-05-291-1/+1
| | | | | | | | | The nand_oobinfo structure is not fitting the newer error correction demands anymore. Replace it by struct nand_ecclayout and fixup the users all over the place. Keep the nand_oobinfo based ioctl for user space compability reasons. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* [MTD] NAND Consolidate oobinfo handlingThomas Gleixner2006-05-291-3/+1
| | | | | | | | | The info structure for out of band data was copied into the mtd structure. Make it a pointer and remove the ability to set it from userspace. The position of ecc bytes is defined by the hardware and should not be changed by software. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* [MTD] Remove read/write _ecc variantsThomas Gleixner2006-05-231-116/+0
| | | | | | | MTD clients are agnostic of FLASH which needs ECC suppport. Remove the functions and fixup the callers. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* [MTD] Remove nand writev supportThomas Gleixner2006-05-231-18/+2
| | | | | | NAND writev(_ecc) support is not longer necessary. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* [MTD] Introduce writesizeJoern Engel2006-05-221-5/+5
| | | | | | | | At least two flashes exists that have the concept of a minimum write unit, similar to NAND pages, but no other NAND characteristics. Therefore, rename the minimum write unit to "writesize" for all flashes, including NAND. Signed-off-by: Joern Engel <joern@wh.fh-wedel.de>
* [MTD] Avoid 64-bit division in mtdconcatAndrew Morton2006-05-201-2/+6
| | | | | | | WARNING: "__moddi3" [drivers/mtd/mtdconcat.ko] undefined! Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] Fix mtdconcat build. We didn't introduce mtd->writesize yet.David Woodhouse2006-05-171-2/+2
| | | | Signed-off-by: David Woodhouse <dwmw2@infradead.org>
OpenPOWER on IntegriCloud