summaryrefslogtreecommitdiffstats
path: root/drivers/media/usb
Commit message (Collapse)AuthorAgeFilesLines
* [media] usb: check media device errorsMauro Carvalho Chehab2016-01-114-20/+54
| | | | | | | | | | | | | | | | | | | | There are now two new warnings: drivers/media/usb/dvb-usb-v2/dvb_usb_core.c: In function 'dvb_usbv2_media_device_register': drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:433:2: warning: ignoring return value of '__media_device_register', declared with attribute warn_unused_result [-Wunused-result] media_device_register(adap->dvb_adap.mdev); ^ drivers/media/usb/dvb-usb/dvb-usb-dvb.c: In function 'dvb_usb_media_device_register': drivers/media/usb/dvb-usb/dvb-usb-dvb.c:128:2: warning: ignoring return value of '__media_device_register', declared with attribute warn_unused_result [-Wunused-result] media_device_register(adap->dvb_adap.mdev); ^ Those are because the drivers are not properly checking if the media device init and register were succeeded. Fix it. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media-device: split media initialization and registrationJavier Martinez Canillas2016-01-116-57/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | The media device node is registered and so made visible to user-space before entities are registered and links created which means that the media graph obtained by user-space could be only partially enumerated if that happens too early before all the graph has been created. To avoid this race condition, split the media init and registration in separate functions and only register the media device node when all the pending subdevices have been registered, either explicitly by the driver or asynchronously using v4l2_async_register_subdev(). The media_device_register() had a check for drivers not filling dev and model fields but all drivers in mainline set them and not doing it will be a driver bug so change the function return to void and add a BUG_ON() for dev being NULL instead. Also, add a media_device_cleanup() function that will destroy the graph_mutex that is initialized in media_device_init(). [mchehab@osg.samsung.com: Fix compilation if !CONFIG_MEDIA_CONTROLLER and remove two warnings added by this changeset] Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] uvcvideo: register entity subdev on initJavier Martinez Canillas2016-01-111-24/+9
| | | | | | | | | | | | | The uvc_mc_register_entities() function iterated over the entities three times to initialize the entities, register the subdev for the ones whose type was UVC_TT_STREAMING and to create the entities links. But this can be simplied by merging the init and registration logic in a single loop. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] uvcvideo: remove pads prefix from uvc_mc_create_pads_links()Javier Martinez Canillas2016-01-111-3/+3
| | | | | | | | | | The function uvc_mc_create_pads_links() creates entities links but the "pads" prefix is redundant since the driver doesn't handle any other kind of link, so it can be removed. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media framework: rename pads init function to media_entity_pads_init()Mauro Carvalho Chehab2016-01-113-7/+7
| | | | | | | | | | | | | | | | | With the MC next gen rework, what's left for media_entity_init() is to just initialize the PADs. However, certain devices, like a FLASH led/light doesn't have any input or output PAD. So, there's no reason why calling media_entity_init() would be mandatory. Also, despite its name, what this function actually does is to initialize the PADs data. So, rename it to media_entity_pads_init() in order to reflect that. The media entity actual init happens during entity register, at media_device_register_entity(). We should move init of num_links and num_backlinks to it. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] uapi/media.h: Rename entities types to functionsMauro Carvalho Chehab2016-01-114-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename the userspace types from MEDIA_ENT_T_ to MEDIA_ENT_F_ and add the backward compatibility bits. The changes at the .c files was generated by the following coccinelle script: @@ @@ -MEDIA_ENT_T_UNKNOWN +MEDIA_ENT_F_UNKNOWN @@ @@ -MEDIA_ENT_T_DVB_BASE +MEDIA_ENT_F_DVB_BASE @@ @@ -MEDIA_ENT_T_V4L2_BASE +MEDIA_ENT_F_V4L2_BASE @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_BASE +MEDIA_ENT_F_V4L2_SUBDEV_BASE @@ @@ -MEDIA_ENT_T_CONNECTOR_BASE +MEDIA_ENT_F_CONNECTOR_BASE @@ @@ -MEDIA_ENT_T_V4L2_VIDEO +MEDIA_ENT_F_IO_V4L @@ @@ -MEDIA_ENT_T_V4L2_VBI +MEDIA_ENT_F_IO_VBI @@ @@ -MEDIA_ENT_T_V4L2_SWRADIO +MEDIA_ENT_F_IO_SWRADIO @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_UNKNOWN +MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN @@ @@ -MEDIA_ENT_T_CONN_RF +MEDIA_ENT_F_CONN_RF @@ @@ -MEDIA_ENT_T_CONN_SVIDEO +MEDIA_ENT_F_CONN_SVIDEO @@ @@ -MEDIA_ENT_T_CONN_COMPOSITE +MEDIA_ENT_F_CONN_COMPOSITE @@ @@ -MEDIA_ENT_T_CONN_TEST +MEDIA_ENT_F_CONN_TEST @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_SENSOR +MEDIA_ENT_F_CAM_SENSOR @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_FLASH +MEDIA_ENT_F_FLASH @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_LENS +MEDIA_ENT_F_LENS @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_DECODER +MEDIA_ENT_F_ATV_DECODER @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_TUNER +MEDIA_ENT_F_TUNER @@ @@ -MEDIA_ENT_T_DVB_DEMOD +MEDIA_ENT_F_DTV_DEMOD @@ @@ -MEDIA_ENT_T_DVB_DEMUX +MEDIA_ENT_F_TS_DEMUX @@ @@ -MEDIA_ENT_T_DVB_TSOUT +MEDIA_ENT_F_IO_DTV @@ @@ -MEDIA_ENT_T_DVB_CA +MEDIA_ENT_F_DTV_CA @@ @@ -MEDIA_ENT_T_DVB_NET_DECAP +MEDIA_ENT_F_DTV_NET_DECAP Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media-entity.h: rename entity.type to entity.functionMauro Carvalho Chehab2016-01-114-7/+7
| | | | | | | | | | | | | | | | | Entities should have one or more functions. Calling it as a type proofed to not be correct, as an entity could eventually have more than one type. So, rename the field as function. Please notice that this patch doesn't extend support for multiple function entities. Such change will happen when we have real case drivers using it. No functional changes. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] au0828: enforce check for graph creationMauro Carvalho Chehab2016-01-111-19/+39
| | | | | | | If the graph creation fails, don't register the device. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] cx231xx: enforce check for graph creationMauro Carvalho Chehab2016-01-111-14/+26
| | | | | | | If the graph creation fails, don't register the device. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] dvb core: must check dvb_create_media_graph()Mauro Carvalho Chehab2016-01-114-7/+17
| | | | | | | | | | If media controller is enabled and mdev is filled, it should ensure that the media graph will be properly initialized. Enforce that. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] au0828: Create connector linksMauro Carvalho Chehab2016-01-111-0/+26
| | | | | | | Now that connectors are entities, we need to represent the connector links. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] au0828: add support for the connectorsMauro Carvalho Chehab2016-01-113-12/+82
| | | | | | | Depending on the input, an au0828 may have a different number of connectors. add entities to represent them. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] au0828: postpone call to au0828_unregister_media_device()Mauro Carvalho Chehab2016-01-111-2/+4
| | | | | | | | | The DVB core needs to unregister the media device. So, we can't call au0828_unregister_media_device() before calling au0828_dvb_unregister(), otherwise the DVB MC free code (that will be implemented on the next patch) will fail. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] tuner-core: add an input padMauro Carvalho Chehab2016-01-112-2/+5
| | | | | | | | | Tuners actually have at least one connector on its input. Add a PAD to connect it. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media: convert links from array to listMauro Carvalho Chehab2016-01-113-17/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The entire logic that represent graph links were developed on a time where there were no needs to dynamic remove links. So, although links are created/removed one by one via some functions, they're stored as an array inside the entity struct. As the array may grow, there's a logic inside the code that checks if the amount of space is not enough to store the needed links. If it isn't the core uses krealloc() to change the size of the link, with is bad, as it leaves the memory fragmented. So, convert links into a list. Also, currently, both source and sink entities need the link at the graph traversal logic inside media_entity. So there's a logic duplicating all links. That makes it to spend twice the memory needed. This is not a big deal for today's usage, where the number of links are not big. Yet, if during the MC workshop discussions, it was said that IIO graphs could have up to 4,000 entities. So, we may want to remove the duplication on some future. The problem is that it would require a separate linked list to store the backlinks inside the entity, or to use a more complex algorithm to do graph backlink traversal, with is something that the current graph traversal inside the core can't cope with. So, let's postpone a such change if/when it is actually needed. It should also be noticed that the media_link structure uses 44 bytes on 32-bit architectures and 84 bytes on 64-bit architecture. It will thus be allocated out of the 64-bytes and 96-bytes pools respectively. That's a 12.5% memory waste on 64-bit architectures and 31.25% on 32-bit architecture. A linked list is less efficient than an array in this case, but this could later be optimized if we can get rid of the reverse links (with would reduce memory allocation by 50%). Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] uvcvideo: create pad links after subdev registrationJavier Martinez Canillas2016-01-111-4/+19
| | | | | | | | | | | The uvc driver creates the pads links before the media entity is registered with the media device. This doesn't work now that obj IDs are used to create links so the media_device has to be set. Move entities registration logic before pads links creation. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media: rename the function that create pad linksMauro Carvalho Chehab2016-01-113-7/+7
| | | | | | | | | | | | | | | | | With the new API, a link can be either between two PADs or between an interface and an entity. So, we need to use a better name for the function that create links between two pads. So, rename the such function to media_create_pad_link(). No functional changes. This patch was created via this shell script: for i in $(find drivers/media -name '*.[ch]' -type f) $(find drivers/staging/media -name '*.[ch]' -type f) $(find include/ -name '*.h' -type f) ; do sed s,media_entity_create_link,media_create_pad_link,g <$i >a && mv a $i; done Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] au0828: Fix the logic that enables the analog demoder linkMauro Carvalho Chehab2016-01-111-2/+2
| | | | | | | | | This logic was broken on the original patch, likely due to a cut-and-paste mistake. Fix it. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media: get rid of unused "extra_links" param on media_entity_init()Mauro Carvalho Chehab2016-01-113-6/+6
| | | | | | | | | | | | | | | | | | Currently, media_entity_init() creates an array with the links, allocated at init time. It provides a parameter (extra_links) that would allocate more links than the current needs, but this is not used by any driver. As we want to be able to do dynamic link allocation/removal, we'll need to change the implementation of the links. So, before doing that, let's first remove that extra unused parameter, in order to cleanup the interface first. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] au0828: Cache the decoder info at au0828 dev structureMauro Carvalho Chehab2016-01-113-14/+10
| | | | | | | | | Instead of seeking for the decoder every time analog stream is started, cache it. This simplifies the code a little bit. Requested-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] au0828: Add support for media controllerRafael Lourenço de Lima Chehab2016-01-114-0/+197
| | | | | | | Add support for analog and dvb tv using media controller. Signed-off-by: Rafael Lourenço de Lima Chehab <chehabrafael@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] rtl28xxu: return demod reg page from driver cacheAntti Palosaari2015-12-231-5/+11
| | | | | | | | | Return current active rtl2830/rtl2832 register page from the driver cache in order to reduce I2C I/O. Register page is already cached due to I2C write needs. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] uvcvideo: small cleanup in uvc_video_clock_update()Dan Carpenter2015-12-181-1/+1
| | | | | | | | | | Smatch is not smart enough to see that "&stream->clock.lock" and "&clock->lock" are the same thing so it complains about the locking here. Let's make it more consistent. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] uvcvideo: Fix reading the current exposure value of UVCAnton V. Shokurov2015-12-181-1/+2
| | | | | | | | | | | | V4L2_CID_EXPOSURE_ABSOLUTE property does not return an updated value when autoexposure (V4L2_CID_EXPOSURE_AUTO) is turned on. This patch fixes this issue by adding the UVC_CTRL_FLAG_AUTO_UPDATE flag. Tested on a C920 camera. Signed-off-by: Anton V. Shokurov <shokurov.anton.v@yandex.ru> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media: videobuf2: Move timestamp to vb2_bufferJunghak Sung2015-12-1810-21/+15
| | | | | | | | | | | | | | Move timestamp from struct vb2_v4l2_buffer to struct vb2_buffer for common use, and change its type to u64 in order to handling y2038 problem. This patch also includes all device drivers' changes related to this restructuring. Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] vb2: drop v4l2_format argument from queue_setupHans Verkuil2015-12-1813-66/+34
| | | | | | | | | | | | | | | | | | | | | The queue_setup callback has a void pointer that is just for V4L2 and is the pointer to the v4l2_format struct that was passed to VIDIOC_CREATE_BUFS. The idea was that drivers would use the information from that struct to buffers suitable for the requested format. After the vb2 split series this pointer is now a void pointer, which is ugly, and the reality is that all existing drivers will effectively just look at the sizeimage field of v4l2_format. To make this more generic the queue_setup callback is changed: the void pointer is dropped, instead if the *num_planes argument is 0, then use the current format size, if it is non-zero, then it contains the number of requested planes and the sizes array contains the requested sizes. If either is unsupported, then return -EINVAL, otherwise use the requested size(s). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] cx231xx: fix NTSC cropcap, add missing cropcap for 417Hans Verkuil2015-12-182-2/+25
| | | | | | | | | The pixelaspect ratio was set incorrectly for 60Hz formats. And since cropcap wasn't implemented at all for the -417 (compressed video) the pixelaspect was unknown for compressed video. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* Revert "[media] UVC: Add support for ds4 depth camera"Mauro Carvalho Chehab2015-12-122-32/+0
| | | | | | | | | | | This reverts commit 120c41d3477a23c6941059401db63677736f1935. The patch doesn't add the corresponding documentation bits to the media infrastructure uAPI DocBook. Also, they're for 3D formats, with requre further discussions. Requested-by: Hans Verkuil <hverkuil@xs4all.nl> Requested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
* [media] use https://linuxtv.org for LinuxTV URLsMauro Carvalho Chehab2015-12-042-2/+2
| | | | | | | | | | | While https was always supported on linuxtv.org, only in Dec 3 2015 the website is using valid certificates. As we're planning to drop pure http support on some future, change all references at the media subsystem to point to the https URL instead. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] UVC: Add support for ds4 depth cameraAviv Greenberg2015-12-032-0/+32
| | | | | | | | | | | | | | Add support for Intel DS4 depth camera in uvc driver. This includes adding new uvc GUIDs for the new pixel formats, adding new V4L pixel format definition to user api headers, and updating the uvc driver GUID-to-4cc tables with the new formats. Change-Id: If240d95a7d4edc8dcc3e02d58cd8267a6bbf6fcb Tested-by: Greenberg, Aviv D <aviv.d.greenberg@intel.com> Signed-off-by: Aviv Greenberg <aviv.d.greenberg@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] cx231xx: constify cx2341x_handler_ops structuresJulia Lawall2015-12-031-1/+1
| | | | | | | | | | | The cx2341x_handler_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] v4l2-dv-timings: add new arg to v4l2_match_dv_timingsHans Verkuil2015-12-031-1/+1
| | | | | | | | | | Add the new match_reduced_fps argument to v4l2_match_dv_timings(). Depending on the situation you may or may not desire to match the reduced_fps flag. Typically only HDMI transmitters will need to check for this flag. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] usbvision: fix crash on detecting device with invalid configurationVladis Dronov2015-11-191-1/+15
| | | | | | | | | | The usbvision driver crashes when a specially crafted usb device with invalid number of interfaces or endpoints is detected. This fix adds checks that the device has proper configuration expected by the driver. Reported-by: Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] Add support for dvb usb stick Hauppauge WinTV-soloHDArno Bauernöppel2015-11-191-0/+2
| | | | | | | | | | | | This patch adds support for the DVB-T/C/T2 usb stick WinTV-soloHD from Hauppauge. It adds the usb ID 2040:0264 Hauppauge to the cards of the driver em28xx. I successfully tested DVB-T/C and the IR remote control with the firmware dvb-demod-si2168-b40-01.fw. Signed-off-by: Arno Bauernoeppel <arno@aziraphale.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] cx231xx_dvb: use demod_i2c for demod attachMatthias Schwarzott2015-11-192-8/+8
| | | | | | | | | | | | | Tested: * CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx * CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx Not Tested: * CX231XX_BOARD_HAUPPAUGE_EXETER * CX231XX_BOARD_HAUPPAUGE_955Q Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] ttusb-dec: constify ttusbdecfe_config structureJulia Lawall2015-11-191-1/+1
| | | | | | | | | | | | The ttusbdecfe_config structure is never modified, so declare it as const. Other references to this structure type were already declared as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] drivers/media/usb/dvb-usb-v2: constify mxl111sf_demod_config structureJulia Lawall2015-11-193-5/+5
| | | | | | | | | | | The mxl111sf_demod_config structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] uvcvideo: Enable UVC 1.5 device detectionLaurent Pinchart2015-11-191-1/+2
| | | | | | | | | | | | | | | | | | | UVC 1.5 devices report a bInterfaceProtocol value set to 1 in their interface descriptors. The uvcvideo driver only matches on bInterfaceProtocol 0, preventing those devices from being detected. More changes to the driver are needed for full UVC 1.5 compatibility. However, at least the UVC 1.5 Microsoft Surface Pro 3 cameras have been reported to work out of the box with the driver with an updated match table. Enable UVC 1.5 support in the match table to support the devices that can work with the current driver implementation. Devices that can't will fail, but that's hardly a regression as they're currently not detected at all anyway. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] em28xx: add Terratec Cinergy T XS (MT2060)Alberto Mardegan2015-11-192-2/+21
| | | | | | | | | | | | | The Terratec Cinergy T XS is a DVB-T receiver with no analog TV tuner. This patch adds support for the cards carrying the mt2060 tuner; it's unclear whether there are cards sold under the same name which use a different tuner. As long as there are no reports of such cards, and indeed as long as there are no working drivers for them, we assume that the USB device [0ccd:0043] is carrying the mt2060 tuner. Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] as102: fix potential double free in as102_fw_upload()Christian Engelmayer2015-11-191-0/+1
| | | | | | | | | In case the request to locate the firmware file part 2 fails, the error path releases the already freed firmware memory location again. Thus reset the firmware pointer to NULL after releasing firmware file part 1. Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] mxl111sf: missing return values validationInsu Yun2015-11-191-2/+2
| | | | | | | | | Return values of mxl111sf_enable_usb_output and mxl1x1sf_top_master_ctrl are not validated. Signed-off-by: Insu Yun <wuninsu@gmail.com> Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] v4l2-clk: add new definition: V4L2_CLK_NAME_SIZEJosh Wu2015-11-171-1/+1
| | | | | | | | | | | Make all v4l2-clk's clock name use V4L2_CLK_NAME_SIZE definition. In future, if the string is increased we just need to change the V4L2_CLK_NAME_SIZE once. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] usbvision fix overflow of interfaces arrayOliver Neukum2015-11-171-0/+7
| | | | | | | | | | | This fixes the crash reported in: http://seclists.org/bugtraq/2015/Oct/35 The interface number needs a sanity check. Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media: fix waitqueue_active without memory barrier in cpia2 driverKosuke Tatsukawa2015-11-171-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cpia2_usb_disconnect() seems to be missing a memory barrier which might cause the waker to not notice the waiter and miss sending a wake_up as in the following figure. cpia2_usb_disconnect sync ------------------------------------------------------------------------ mutex_unlock(&cam->v4l2_lock); if (waitqueue_active(&cam->wq_stream)) /* The CPU might reorder the test for the waitqueue up here, before prior writes complete */ /* wait_event_interruptible */ /* __wait_event_interruptible */ /* ___wait_event */ long __int = prepare_to_wait_event( &wq, &__wait, state); if (!cam->streaming || frame->status == FRAME_READY) cam->curbuff->status = FRAME_READY; cam->curbuff->length = 0; schedule() ------------------------------------------------------------------------ The attached patch removes the call to waitqueue_active() leaving just wake_up() behind. This fixes the problem because the call to spin_lock_irqsave() in wake_up() will be an ACQUIRE operation. I found this issue when I was looking through the linux source code for places calling waitqueue_active() before wake_up*(), but without preceding memory barriers, after sending a patch to fix a similar issue in drivers/tty/n_tty.c (Details about the original issue can be found here: https://lkml.org/lkml/2015/9/28/849). Signed-off-by: Kosuke Tatsukawa <tatsu@ab.jp.nec.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] gspca: ov534/topro: prevent a division by 0Antonio Ospite2015-11-172-3/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | v4l2-compliance sends a zeroed struct v4l2_streamparm in v4l2-test-formats.cpp::testParmType(), and this results in a division by 0 in some gspca subdrivers: divide error: 0000 [#1] SMP Modules linked in: gspca_ov534 gspca_main ... CPU: 0 PID: 17201 Comm: v4l2-compliance Not tainted 4.3.0-rc2-ao2 #1 Hardware name: System manufacturer System Product Name/M2N-E SLI, BIOS ASUS M2N-E SLI ACPI BIOS Revision 1301 09/16/2010 task: ffff8800818306c0 ti: ffff880095c4c000 task.ti: ffff880095c4c000 RIP: 0010:[<ffffffffa079bd62>] [<ffffffffa079bd62>] sd_set_streamparm+0x12/0x60 [gspca_ov534] RSP: 0018:ffff880095c4fce8 EFLAGS: 00010296 RAX: 0000000000000000 RBX: ffff8800c9522000 RCX: ffffffffa077a140 RDX: 0000000000000000 RSI: ffff880095e0c100 RDI: ffff8800c9522000 RBP: ffff880095e0c100 R08: ffffffffa077a100 R09: 00000000000000cc R10: ffff880067ec7740 R11: 0000000000000016 R12: ffffffffa07bb400 R13: 0000000000000000 R14: ffff880081b6a800 R15: 0000000000000000 FS: 00007fda0de78740(0000) GS:ffff88012fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000014630f8 CR3: 00000000cf349000 CR4: 00000000000006f0 Stack: ffffffffa07a6431 ffff8800c9522000 ffffffffa077656e 00000000c0cc5616 ffff8800c9522000 ffffffffa07a5e20 ffff880095e0c100 0000000000000000 ffff880067ec7740 ffffffffa077a140 ffff880067ec7740 0000000000000016 Call Trace: [<ffffffffa07a6431>] ? v4l_s_parm+0x21/0x50 [videodev] [<ffffffffa077656e>] ? vidioc_s_parm+0x4e/0x60 [gspca_main] [<ffffffffa07a5e20>] ? __video_do_ioctl+0x280/0x2f0 [videodev] [<ffffffffa07a5ba0>] ? video_ioctl2+0x20/0x20 [videodev] [<ffffffffa07a59b9>] ? video_usercopy+0x319/0x4e0 [videodev] [<ffffffff81182dc1>] ? page_add_new_anon_rmap+0x71/0xa0 [<ffffffff811afb92>] ? mem_cgroup_commit_charge+0x52/0x90 [<ffffffff81179b18>] ? handle_mm_fault+0xc18/0x1680 [<ffffffffa07a15cc>] ? v4l2_ioctl+0xac/0xd0 [videodev] [<ffffffff811c846f>] ? do_vfs_ioctl+0x28f/0x480 [<ffffffff811c86d4>] ? SyS_ioctl+0x74/0x80 [<ffffffff8154a8b6>] ? entry_SYSCALL_64_fastpath+0x16/0x75 Code: c7 93 d9 79 a0 5b 5d e9 f1 f3 9a e0 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 53 31 d2 48 89 fb 48 83 ec 08 8b 46 10 <f7> 76 0c 80 bf ac 0c 00 00 00 88 87 4e 0e 00 00 74 09 80 bf 4f RIP [<ffffffffa079bd62>] sd_set_streamparm+0x12/0x60 [gspca_ov534] RSP <ffff880095c4fce8> ---[ end trace 279710c2c6c72080 ]--- Following what the doc says about a zeroed timeperframe (see http://www.linuxtv.org/downloads/v4l-dvb-apis/vidioc-g-parm.html): ... To reset manually applications can just set this field to zero. fix the issue by resetting the frame rate to a default value in case of an unusable timeperframe. The fix is done in the subdrivers instead of gspca.c because only the subdrivers have notion of a default frame rate to reset the camera to. Signed-off-by: Antonio Ospite <ao2@ao2.it> Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] cx231xx: fix bulk transfer modeTerry Heo2015-11-171-1/+14
| | | | | | | | | The current cx231xx driver doesn't work with bulk transfer mode. This patch makes it possible to use bulk transfer mode. Signed-off-by: Terry Heo <terryheo@google.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media/usb/pvrusb2: Support for V4L2_CTRL_WHICH_DEF_VALRicardo Ribalda2015-11-171-2/+14
| | | | | | | | | | | This driver does not use the control infrastructure. Add support for the new field which on structure v4l2_ext_controls Acked-by: Mike Isely <isely@pobox.com> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] usb/uvc: Support for V4L2_CTRL_WHICH_DEF_VALRicardo Ribalda2015-11-171-0/+20
| | | | | | | | | | | This driver does not use the control infrastructure. Add support for the new field which on structure v4l2_ext_controls Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] go7007: fix broken testHans Verkuil2015-11-171-1/+1
| | | | | | | | | The wrong flags field was tested for the GO7007_BOARD_HAS_AUDIO flag: that flag is in board->main_info.flags, not in board->flags. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] include/media: move driver interface headers to a separate dirMauro Carvalho Chehab2015-11-1710-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let's not mix headers used by the core with those headers that are needed by some driver-specific interface header. The headers used on drivers were manually moved using: mkdir include/media/drv-intf/ git mv include/media/cx2341x.h include/media/cx25840.h \ include/media/exynos-fimc.h include/media/msp3400.h \ include/media/s3c_camif.h include/media/saa7146.h \ include/media/saa7146_vv.h include/media/sh_mobile_ceu.h \ include/media/sh_mobile_csi2.h include/media/sh_vou.h \ include/media/si476x.h include/media/soc_mediabus.h \ include/media/tea575x.h include/media/drv-intf/ And the references for those headers were corrected using: MAIN_DIR="media/" PREV_DIR="media/" DIRS="drv-intf/" echo "Checking affected files" >&2 for i in $DIRS; do for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do n=`basename $j` git grep -l $n done done|sort|uniq >files && ( echo "Handling files..." >&2; echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done"; ); echo "Handling documentation..." >&2; echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo " perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done" ); ) >script && . ./script Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
OpenPOWER on IntegriCloud