summaryrefslogtreecommitdiffstats
path: root/drivers/media/dvb/ttpci
Commit message (Collapse)AuthorAgeFilesLines
* V4L/DVB (4787): Budget-ci: Inversion setting fixed for Technotrend 1500 TRaymond Mantchala2006-11-021-0/+1
| | | | | | | | | | | Technotrend 1500 T card have "inverted inversion". This patch fixes that. Many thanks to Martin Zwickel from Technotrend for his confirmation and correction proposal. Signed-off-by: Raymond Mantchala <raymond.mantchala@streamvision.fr> Signed-off-by: Perceval Anichini <perceval.anichini@streamvision.fr> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (4785): Budget-ci: Change DEBIADDR_IR to a safer defaultDavid Härdeman2006-11-021-1/+8
| | | | | | | | | | | | | | | | | | | | The IR chip has no address decoding, so the IR data is always present in the high byte when doing a read from the saa7146 chip. This means that the DEBI address used is irrelevant to the IR decoding logic. DEBI addresses 0x1XXX are mapped to the registers on the CI module itself, but only the lowest two bits are actually used (see EN50221, section A.2.2.1), meaning that 0x1234 is equivalent to 0x1000 which maps to register 0 (the data register). A read from the data register is supposed to be preceded by a read from the size register, so some CI modules will be confused (the AlphaCrypt CAM will hang completely). The attached patch changes the address used when reading the IR data to use 0x4000 instead. This is the CI version address, which is a safer default, works with the AlphaCrypt CAM and matches the behaviour of the Windows driver (AFAIK). Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (4631): Av7110: remove V4L2_CAP_VBI_CAPTURE flagOliver Endriss2006-09-261-1/+1
| | | | | | | | | | | Implement fix suggested by Michael Hunold for a bug reported by Philipp Matthias Hahn: Starting "kdetv" on a Siemens DVB-C 1.x produced an oops because kdetv opened "/dev/vbi0". Remove the V4L2_CAP_VBI_CAPTURE flag because it does not work with this type of hardware anyway. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (4630): Av7110: FW_LOADER depemdency fixedOliver Endriss2006-09-262-1/+5
| | | | | | | Do not select FW_LOADER unless it is really required. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (4607): Port budget-av to use the new tua6100 driverAndrew de Quincey2006-09-262-139/+3
| | | | | | | Port budget-av to use the new tua6100 driver Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (4501): Add support for knc one dvb-s plus with 1894:0011Christoph Pfister2006-09-261-1/+2
| | | | | | | | | | | Apparently there are two types of knc1 dvb-s plus cards with different tuners (as for the knc1 dvb-s ones). This patch adds support for those cards with subsystem id 1894:0011. Successfully tested by: Benjamin Weber <benny1990@gmail.com> Signed-off-by: Christoph Pfister <christophpfister@gmail.com> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (4500): Fix KNC1 DVBC supportAndrew de Quincey2006-09-261-9/+0
| | | | | | | | This actually needs the same configuration as the other DVBC cards; simply no one had managed to test before to find out. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (4480): Remove null chars from dvb namesDave Jones2006-09-264-4/+4
| | | | | | | | | | DVB null terminates its device names, which seems odd, and should be unnecessary. Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (4478): [av7110] Support Grundig DVB-T tuner for sub-system 13c2:0001Oliver Endriss2006-09-261-10/+9
| | | | | | | | Some DVB-T cards with Grundig 29504-401 tuner use subsystem id 13c2:0001 (reported by Stuart Butterfield). Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (4424): Add missing dvb-pll Kconfig infrastructureAndrew de Quincey2006-09-261-0/+7
| | | | | Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (4402): Fix budget-ci to use dvb_frontend_detach()Andrew de Quincey2006-09-261-2/+1
| | | | | | | I missed one call during the dvb_attach() development. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (4397): Add tda10086 support for TT DVB-S-1401Andrew de Quincey2006-09-262-32/+54
| | | | | | | Add the necessary code and makefile infrastructure Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (4391): Refactor dvb_detach calls into a single dvb_frontend_detach ↵Andrew de Quincey2006-09-265-30/+10
| | | | | | | | | | | function. Remove buggy dvb_detach() macro and replace with unified dvb_frontend_detach() call. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (4386): Convert DVB devices to use dvb_attach()Andrew de Quincey2006-09-265-60/+86
| | | | | | | | | | Only devices using > 1 frontend were ported; ones which did not are left using static binding. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (4384): Remove remaining static function callsAndrew de Quincey2006-09-261-3/+3
| | | | | | | | | Rewrote _write() calls to use write() op. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (4383): Convert SEC drivers to new frontend APIAndrew de Quincey2006-09-263-3/+3
| | | | | | | | | Convert SEC drivers to new frontend API Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (4378): Ttpci/: remove unneeded #include <linux/byteorder/swabb.h>'sAdrian Bunk2006-09-264-4/+0
| | | | | | | | Since av7110.c is the only file actually using something from this header, there's no reson for other files to Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (4608b): i2c deps fix on DVBAndrew de Quincey2006-09-101-0/+5
| | | | | | | Several DVB modules depends on I2C Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (4323): [budget/budget-av/budget-ci/budget-patch drivers] fixed DMA ↵Oliver Endriss2006-07-296-16/+57
| | | | | | | | | | | | | start/stop code Fix bug reported by Andrew de Quincey: After cold boot the saa7146 DMA did not start if the demuxer was opened before the frontend has locked to the signal. DMA transfers will be started now if (and only if) the frontend is locked and data should be sent to the demuxer. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (4295): Fix typo in comment for TDA9819Marco Schluessler2006-07-292-8/+8
| | | | | | | | Fix typo in comment for TDA9819 Signed-off-by: Marco Schluessler <marco@lordzodiac.de> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (4293): Fix unstable DISEQC behaviour on budget cards.Andrew de Quincey2006-07-291-3/+0
| | | | | | | | | Use the stv0299 native DISEQC implementation instead of the bitbanging one as required by the ves1893. This was originally found by Oliver Endriss. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds2006-06-301-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: Remove obsolete #include <linux/config.h> remove obsolete swsusp_encrypt arch/arm26/Kconfig typos Documentation/IPMI typos Kconfig: Typos in net/sched/Kconfig v9fs: do not include linux/version.h Documentation/DocBook/mtdnand.tmpl: typo fixes typo fixes: specfic -> specific typo fixes in Documentation/networking/pktgen.txt typo fixes: occuring -> occurring typo fixes: infomation -> information typo fixes: disadvantadge -> disadvantage typo fixes: aquire -> acquire typo fixes: mecanism -> mechanism typo fixes: bandwith -> bandwidth fix a typo in the RTC_CLASS help text smb is no longer maintained Manually merged trivial conflict in arch/um/kernel/vmlinux.lds.S
| * Remove obsolete #include <linux/config.h>Jörn Engel2006-06-301-1/+0
| | | | | | | | | | Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* | V4L/DVB (4277): Fix CI interface on PRO KNC1 cardsAndrew de Quincey2006-06-301-5/+1
| | | | | | | | | | | | | | | | The original driver had a restriction that if a card as an saa7113 chip, then it cannot have a CI interface. This is not the case. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* | V4L/DVB (4276): Fix CI on old KNC1 DVBC cardsAndrew de Quincey2006-06-301-0/+9
|/ | | | | | | | These cards do not need the tda10021 configuration change when data is streamed through a CAM module. This disables it for these ones. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* [PATCH] devfs: Remove the devfs_fs_kernel.h file from the treeGreg Kroah-Hartman2006-06-261-4/+0
| | | | | | Also fixes up all files that #include it. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* V4L/DVB (4219): Av7110: analog sound output of DVB-C rev 2.3Tim Kaiser2006-06-263-19/+64
| | | | | | | | | | Added support for the msp34x5 audio dac. Analog sound output of Technotrend DVB-C 2300 (aka Hauppauge Nexus-CA) works now. Signed-off-by: Tim Kaiser <timkaiser@t-online.de> Signed-off-by: Marco Schluessler <marco@lordzodiac.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (4106): Fix problems with AV7110 firmware buildingTrent Piepho2006-06-251-3/+3
| | | | | | | | Fix missing $() on variable name in dvb/ttpci/Makefile Fix AV7110 firmware dependencies so that parallel builds work correctly. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (4073): Support for new version of Satelco EasyWatch DVB-S lightLothar Englisch2006-06-251-0/+4
| | | | | | | | | This patch adds support for Satelco EasyWatch DVB-S light card, a clone of the KNC 1, with PCI subsystem ID 1894:001e Signed-off-by: Lothar Englisch <Lothar.Englisch@lycos.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (4028): Change dvb_frontend_ops to be a real field instead of a ↵Patrick Boettcher2006-06-255-160/+160
| | | | | | | | | | | | | | | | | | pointer field inside dvb_frontend The dvb_frontend_ops is a pointer inside dvb_frontend. That's why every demod-driver is having a field of dvb_frontend_ops in its private-state-struct and using the reference for filling the pointer-field in dvb_frontend. - It saves at least two lines of code per demod-driver, - reduces object size (one less dereference per frontend_ops-access), - be coherent with dvb_tuner_ops, - makes it a little bit easier for newbies to understand how it works and - avoids stupid mistakes because you would have to copy the dvb_frontend_ops always, before you could assign the static pointer directly, which was dangerous. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (3984): Fix CI interface on KNC1 DVBT and DVBC cardsAndrew de Quincey2006-06-251-74/+120
| | | | | | | | | These cards need special handling for CI - reinitialising the frontend device when the CI module is reset. Additionally the tda10021 needs to be set into a different transport stream mode when a CI module is present. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (3934): Support new dvb-ttusb-budget boards with stv0297Thomas Kaiser2006-06-252-0/+2
| | | | | | | | | | Added config switch to stv0297 to control i2c STOP during write behaviour. Update frontend init in dvb-ttusb-budget. Enable i2c STOP on other users of stv0297. Signed-off-by: Thomas Kaiser <linux-dvb AT kaiser-linux.li> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (3932): Convert lnbp21 to a moduleAndrew de Quincey2006-06-254-3/+6
| | | | | | | | | Convert lnbp21.h into a linux kernel module. Fix up previous users to use it. Convert dvb-ttusb-budget to use it. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (3929): Compilation for DVB_AV7110_FIRMWARE seems to be weirdMauro Carvalho Chehab2006-06-251-1/+1
| | | | | | | | | | | Some systems use a previous config information to generate a default config. This seems to cause troubles on some systems. This patch also fixes compilation for AV7110 firmware inside V4L/DVB tree. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (3895): Additional frontend_init safety checksAndrew de Quincey2006-06-252-6/+22
| | | | | | | Don't try and set the tuner ops if the demod was not detected. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (3878): Convert ttpci/budget-patch to refactored tuner codeAndrew de Quincey2006-06-251-6/+15
| | | | | | | | | | Rename pll calls to appropriate tuner calls. Remove pll functions from demod structures. Hook tuner call into tuner_ops. Add pll gate control calls where appropriate. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (3877): Convert ttpci/budget-av to refactored tuner codeAndrew de Quincey2006-06-251-27/+58
| | | | | | | | | | Rename pll calls to appropriate tuner calls. Remove pll functions from demod structures. Hook tuner call into tuner_ops. Add pll gate control calls where appropriate. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (3876): Convert ttpci/budget-ci to refactored tuner codeAndrew de Quincey2006-06-251-14/+32
| | | | | | | | | | Rename pll calls to appropriate tuner calls. Remove pll functions from demod structures. Hook tuner call into tuner_ops. Add pll gate control calls where appropriate. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (3875): Convert ttpci/budget to refactored tuner codeAndrew de Quincey2006-06-251-13/+30
| | | | | | | | | | Rename pll calls to appropriate tuner calls. Remove pll functions from demod structures. Hook tuner call into tuner_ops. Add pll gate control calls where appropriate. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (3874): Convert ttpci/av7110 to refactored tuner codeAndrew de Quincey2006-06-251-19/+41
| | | | | | | | | | Rename pll calls to appropriate tuner calls. Remove pll functions from demod structures. Hook tuner call into tuner_ops. Add pll gate control calls where appropriate. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (3805): Fix KNC1 card frontend detectionAndrew de Quincey2006-06-251-2/+4
| | | | | | | | Since I reordered the CI/frontend detection, it turns out the frontend needs to have a GPIO set to power it on; otherwise frontend init fails. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (3762): Add sysfs device links to dvb devicesAndrew de Quincey2006-06-252-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Currently in /sys/class/dvb/dvbX.demuxY/ we have: dev uevent With the patch, we have (for a PCI DVB device): dev device -> ../../../devices/pci0000:00/0000:00:1e.0/0000:03:0d.0 uevent So userspace tools can (finally) work out which physical device a DVB adapter refers to. Previously you had to kinda look through dmesg and hope that it hadn't been dumped out of the buffer. This makes debugging a lot easier if the system has been up for a long time! This is done by adding an extra 'struct device *' parameter to dvb_register_adapter(). It will work with any kind of standard linux 'device'. Additionally, if someone has an embedded system which does things differently, they can simply supply 'NULL' and the behaviour will be as before - the link will simply not appear. Ack'd-by: Manu Abraham <manu@linuxtv.org> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (3741): Budget-core doesn't check if register adapter failsAndrew de Quincey2006-06-251-1/+3
| | | | | | | If you have more than DVB_MAX_ADAPTERS in your machine, this causes an oops. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (4037): Make the bridge devices that depend on I2C dependant on I2CManu Abraham2006-05-231-4/+4
| | | | | | | Ref: Bugzilla 6179, 6589 Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (3774): Create V4L1 config optionsMauro Carvalho Chehab2006-05-121-7/+5
| | | | | | | | | V4L1 API is depreciated and should be removed soon from kernel. This patch adds two new options, one to disable V4L1 drivers, and another to disable V4L1 compat module. This way, it would be easy to check what still depends on V4L1 stuff, allowing also to test if app works fine with V4L2 only support. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (3740): Fix oops in budget-av with CIAndrew de Quincey2006-05-121-2/+4
| | | | | | | | | | Now that the CI code reinitialises the frontend, need to move the CI initialisation to after the frontend init in order to ensure the frontend is always in a good state. Fixes an oops caused by the frontend being NULL as well. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (3726): Fix TT budget-ci 1.1 CI slotsAndrew de Quincey2006-05-121-20/+85
| | | | | | | | | It turns out the firmware on the TT budget-ci 1.1 slots doesn't generate interrupts. This patch adds support for this using polling mode on these slots. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (3673): Fix budget-av CAM resetAndrew de Quincey2006-04-021-5/+8
| | | | | | | | | | | | | Unfortunately on the budget-av board, the CAM reset line is tied to the frontend reset line, so resetting the CAM also zaps the frontend. This breaks the tda1004x at least, and causes it to fail to tune until the budget-av module is reloaded. This patch adds an exported function to dvb_frontend that allows a card to forcibly reinitialise a frontend. The budget-av now does this on CAM reset, which corrects this problem. since they do not tie the CAM reset line to the frontend reset line. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (3671): New module parameter 'tv_standard' (dvb-ttpci driver)C.Y.M2006-04-022-2/+6
| | | | | | | | | | | | This attached patch was originally proposed by Anssi Hannula to the dvb-kernel user to choose the default broadcast mode when using the ttpci driver. NTSC users need to only add the following line to modprobe.d: options dvb-ttpci tv_standard=1 PAL users will not need to change anything, for this will be the default. Signed-off-by: C.Y.M <syphir@syphir.sytes.net> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (3670): Fix typo in commentAdrian Bunk2006-04-021-1/+1
| | | | | | | | This patch fixes a typo in a comment. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
OpenPOWER on IntegriCloud