summaryrefslogtreecommitdiffstats
path: root/drivers/input
Commit message (Collapse)AuthorAgeFilesLines
* Input: synaptics - fix resolution for manually provided min/maxBenjamin Tissoires2014-06-071-9/+10
| | | | | | | | | | | | | | | | | commit 421e08c41fda fixed the reported min/max for the X and Y axis, but unfortunately, it broke the resolution of those same axis. On the t540p, the resolution is the same regarding X and Y. It is not a problem for xf86-input-synaptics because this driver is only interested in the ratio between X and Y. Unfortunately, xf86-input-cmt uses directly the resolution, and having a null resolution leads to some divide by 0 errors, which are translated by -infinity in the resulting coordinates. Reported-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: synaptics - change min/max quirk table to pnp-id matchingHans de Goede2014-05-261-113/+36
| | | | | | | | | | | | | | | | Most of the affected models share pnp-ids for the touchpad. So switching to pnp-ids give us 2 advantages: 1) It shrinks the quirk list 2) It will lower the new quirk addition frequency, ie the recently added W540 quirk would not have been necessary since it uses the same LEN0034 pnp ids as other models already added before it As an added bonus it actually puts the quirk on the actual psmouse, rather then on the machine, which is technically more correct. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: synaptics - add a matches_pnp_id helper functionHans de Goede2014-05-261-11/+14
| | | | | | | | This is a preparation patch for simplifying the min/max quirk table. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: synaptics - T540p - unify with other LEN0034 modelsHans de Goede2014-05-261-1/+1
| | | | | | | | | | | | The T540p has a touchpad with pnp-id LEN0034, all the models with this pnp-id have the same min/max values, except the T540p where the values are slightly off. Fix them to be identical. This is a preparation patch for simplifying the quirk table. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: synaptics - add min/max quirk for the ThinkPad W540Hans de Goede2014-05-141-0/+8
| | | | | | | | | https://bugzilla.redhat.com/show_bug.cgi?id=1096436 Cc: stable@vger.kernel.org Tested-and-reported-by: ajayr@bigfoot.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: ambakmi - request a shared interrupt for AMBA KMI devicesLiviu Dudau2014-05-131-1/+2
| | | | | | | | | Recent ARM boards have the KMI devices share one interrupt line rather than having dedicated IRQs. Update the driver to take that into account. Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: pxa27x-keypad - fix generating scancodeChao Xie2014-05-131-1/+6
| | | | | | | | | | | | | | | | | The number of columns of pxa27x-keypad used by various boards is not fixed. When building keymap with call to: matrix_keypad_build_keymap(keymap_data, NULL, pdata->matrix_key_rows, pdata->matrix_key_cols, keypad->keycodes, input_dev); it will internally calculate needed row shift and use it to fill the keymap. Therefore when calculating the "scancode" we should no longer use constant row shift but also calculate it from number of columns. Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: atmel-wm97xx - only build for AVR32Arnd Bergmann2014-05-121-1/+1
| | | | | | | | | | | | | | | Building this driver on ARM/at91 always gives us this error message: drivers/input/touchscreen/atmel-wm97xx.c:63:2: error: #error Unknown CPU, this driver only supports AT32AP700X CPUs. Clearly this configuration is not meant to work, so let's just prevent it in Kconfig. If we ever want to use it on another platform, we should also pass proper resources for GPIO, IRQ and memory, which are hardcoded to AT32AP700X at the moment. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: fix ps2/serio module dependencyArnd Bergmann2014-05-122-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | The ps2 mouse and keyboard drivers use the "serio" framework that they correctly select in Kconfig, and that in turn depends on the i8042 driver, which is also allowed to be disabled for architectures that don't have an i8042. However, Kconfig also allows i8042 to be built as a module while the serio framework is built-in, which causes this link error: drivers/built-in.o: In function `ps2_begin_command': :(.text+0x26b6cc): undefined reference to `i8042_check_port_owner' :(.text+0x26b6d4): undefined reference to `i8042_lock_chip' drivers/built-in.o: In function `ps2_end_command': :(.text+0x26b734): undefined reference to `i8042_check_port_owner' :(.text+0x26b73c): undefined reference to `i8042_unlock_chip' On x86, a specific 'select SERIO_I8042' takes care of it, but not on the other architecture that potentially have a i8042. This patch changes the Kconfig logic to ensure that whenever there is an i8042, it does get used for the serio driver, avoiding the link error above. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: elantech - fix touchpad initialization on Gigabyte U2442Hans de Goede2014-05-052-1/+26
| | | | | | | | | | | | | | | | | | | | | | The hw_version 3 Elantech touchpad on the Gigabyte U2442 does not accept 0x0b as initialization value for r10, this stand-alone version of the driver: http://planet76.com/drivers/elantech/psmouse-elantech-v6.tar.bz2 Uses 0x03 which does work, so this means not setting bit 3 of r10 which sets: "Enable Real H/W Resolution In Absolute mode" Which will result in half the x and y resolution we get with that bit set, so simply not setting it everywhere is not a solution. We've been unable to find a way to identify touchpads where setting the bit will fail, so this patch uses a dmi based blacklist for this. https://bugzilla.kernel.org/show_bug.cgi?id=61151 Cc: stable@vger.kernel.org Reported-by: Philipp Wolfer <ph.wolfer@gmail.com> Tested-by: Philipp Wolfer <ph.wolfer@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: tca8418 - fix loading this driver as a module from a device treeDr. H. Nikolaus Schaller2014-04-241-0/+7
| | | | | | | | | Loading the tca8418 driver as a module on a device tree based system needs a MODULE_ALIAS because the driver name does not match the automatic name generation rules of a 'compatible' entry on i2c bus. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: bma150 - extend chip detection for bma180Dr. H. Nikolaus Schaller2014-04-241-1/+3
| | | | | | | This driver has been used while on the OpenPhoenux GTA04 with a BMA180. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: atkbd - fix keyboard not working on some LG laptopsSheng-Liang Song2014-04-241-1/+28
| | | | | | | | | | | | | After issuing ATKBD_CMD_RESET_DIS, keyboard on some LG laptops stops working. The workaround is to stop issuing ATKBD_CMD_RESET_DIS commands. In order to keep changes in atkbd driver to the minimum we check DMI signature and only skip ATKBD_CMD_RESET_DIS if we are running on LG LW25-B7HV or P1-J273B. Cc: stable@vger.kernel.org Signed-off-by: Sheng-Liang Song <ssl@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: synaptics - add min/max quirk for ThinkPad Edge E431Hans de Goede2014-04-231-0/+8
| | | | | | Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: elantech - add support for newer elantech touchpadsJordan Rife2014-04-221-0/+1
| | | | | | | | | | | Newer elantech touchpads are not recognized by the current driver, since it fails to detect their firmware version number. This prevents more advanced touchpad features from being usable such as two-finger scrolling. This patch allows newer touchpads to be detected and be fully functional. Tested on Sony Vaio SVF13N17PXB. Signed-off-by: Jordan Rife <jrife0@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: soc_button_array - fix a crash during rmmodLejun Zhu2014-04-221-0/+1
| | | | | | | | | When the system has zero or one button available, trying to rmmod soc_button_array will cause crash. Fix this by properly handling -ENODEV in probe(). Signed-off-by: Lejun Zhu <lejun.zhu@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: synaptics - add min/max quirk for ThinkPad T431s, L440, L540, S1 Yoga ↵Hans de Goede2014-04-191-0/+42
| | | | | | | | | | | | | | | | | | | | | | | | | and X1 We expect that all the Haswell series will need such quirks, sigh. The T431s seems to be T430 hardware in a T440s case, using the T440s touchpad, with the same min/max issue. The X1 Carbon 3rd generation name says 2nd while it is a 3rd generation. The X1 and T431s share a PnPID with the T540p, but the reported ranges are closer to those of the T440s. HdG: Squashed 5 quirk patches into one. T431s + L440 + L540 are written by me, S1 Yoga and X1 are written by Benjamin Tissoires. Hdg: Standardized S1 Yoga and X1 values, Yoga uses the same touchpad as the X240, X1 uses the same touchpad as the T440. Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: synaptics - report INPUT_PROP_TOPBUTTONPAD propertyHans de Goede2014-04-191-2/+53
| | | | | | | | Check PNP ID of the PS/2 AUX port and report INPUT_PROP_TOPBUTTONPAD property for for touchpads with top button areas. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: i8042 - add firmware_id supportHans de Goede2014-04-192-0/+21
| | | | | | | | | Fill in the new serio firmware_id sysfs attribute for pnp instantiated 8042 serio ports. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: serio - add firmware_id sysfs attributeHans de Goede2014-04-191-0/+14
| | | | | | | | | | | | | | | | | | | | serio devices exposed via platform firmware interfaces such as ACPI may provide additional identifying information of use to userspace. We don't associate the serio devices with the firmware device (we don't set it as parent), so there's no way for userspace to make use of this information. We cannot change the parent for serio devices instantiated though a firmware interface as that would break suspend / resume ordering. Therefore this patch adds a new firmware_id sysfs attribute so that userspace can get a string from there with any additional identifying information the firmware interface may provide. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - handle 1024 pressure levels in wacom_tpc_penJason Gerecke2014-04-191-1/+1
| | | | | | | | | | | Some tablet PC sensors (e.g. the 0xEC found in the Thinkpad Yoga) report more than 256 pressure levels and will experience wraparound unless the full range is read. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Aaron Skomra <Aaron.Skomra@wacom.com> Reviewed-by: Carl Worth <cworth@cworth.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - references to 'wacom->data' should use 'unsigned char*'Jason Gerecke2014-04-191-18/+9
| | | | | | | | | | 'wacom->data' contains raw binary data and can lead to unexpected behavior if a byte under examination happens to have its MSB set. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Aaron Skomra <Aaron.Skomra@wacom.com> Reviewed-by: Carl Worth <cworth@cworth.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - override 'pressure_max' with value from HID_USAGE_PRESSUREJason Gerecke2014-04-191-0/+9
| | | | | | | | | | | | | The 0xEC sensor is used in multiple tablet PCs and curiously has versions that report 256 levels of pressure (Samsung Slate 7) as well as versions that report 1024 levels (Lenovo Thinkpad Yoga). To allow both versions to work properly, we allow the value of HID_USAGE_PRESSURE reported to override pressure_max. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Aaron Skomra <Aaron.Skomra@wacom.com> Reviewed-by: Carl Worth <cworth@cworth.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - use full 32-bit HID Usage value in switch statementJason Gerecke2014-04-191-128/+109
| | | | | | | | | | | | | | | | | | | | | | A HID Usage is a 32-bit value: an upper 16-bit "page" and a lower 16-bit ID. While the two halves are normally reported seperately, only the combination uniquely idenfifes a particular HID Usage. The existing code performs the comparison in two steps, first performing a switch on the ID and then verifying the page within each case. While this works fine, it is very akward to handle two Usages that share a single ID, such as HID_USAGE_PRESSURE and HID_USAGE_X because the case statement can only have a single identifier. To work around this, we now check the full 32-bit HID Usage directly rather than first checking the ID and then the page. This allows the switch statement to have distinct cases for e.g. HID_USAGE_PRESSURE and HID_USAGE_X. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Aaron Skomra <Aaron.Skomra@wacom.com> Reviewed-by: Carl Worth <cworth@cworth.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - missed the last bit of expresskey for DTU-1031Ping Cheng2014-04-191-1/+1
| | | | | Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: ads7846 - fix device usage within attribute showAlexander Stein2014-04-191-1/+1
| | | | | | | | | | | With commit e585c40ba (Input: ads7846 - convert to hwmon_device_register_with_groups()) the device passed to the attribute's show function isn't the spi device as before. So fixup the passed device to ads7846_read12_ser. Signed-off-by: Alexander Stein <alexanders83@web.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: da9055_onkey - remove use of regmap_irq_get_virq()Adam Thomson2014-04-191-1/+0
| | | | | | | | | | | | | | Using platform_get_irq_byname() to retrieve the IRQ number returns the VIRQ number rather than the local IRQ number for the device. Passing that value then into regmap_irq_get_virq() causes a failure because the function is expecting the local IRQ number (e.g. 0, 1, 2, 3, etc). This patch removes use of regmap_irq_get_virq() to prevent this failure from happening. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Merge branch 'next' into for-linusDmitry Torokhov2014-04-0330-1231/+1653
|\ | | | | | | First round of input updates for 3.15.
| * Input: edt-ft5x06 - add a missing conditionDan Carpenter2014-04-031-3/+4
| | | | | | | | | | | | | | | | | | | | | | The if condition was accidentally deleted here so we return every time instead of returning on error. Fixes: fd335ab04b3f ('Input: edt-ft5x06 - add support for M09 firmware version') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Acked-By: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: appletouch - fix jumps when additional fingers are detectedClinton Sprain2014-03-301-6/+21
| | | | | | | | | | | | | | | | | | | | | | | | Addresses issues related to when a second finger enters or leaves the field, causing the cursor to jump or the page to scroll unexpectedly; now, we discard any movement change that happens at the exact moment we detect a change in the number of fingers touching the trackpad. This doesn't completely resolve the issue but does greatly mitigate it. Signed-off-by: Clinton Sprain <clintonsprain@gmail.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: appletouch - implement sensor data smoothingClinton Sprain2014-03-301-24/+79
| | | | | | | | | | | | | | | | | | | | Use smoothed version of sensor array data to calculate movement and add weight to prior values when calculating average. This gives more granular and more predictable movement. Signed-off-by: Clinton Sprain <clintonsprain@gmail.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: add driver for SOC button arrayLejun Zhu2014-03-303-0/+229
| | | | | | | | | | | | | | | | | | This patch adds support for the GPIO buttons on some Intel Bay Trail tablets originally running Windows 8. The ACPI description of these buttons follows "Windows ACPI Design Guide for SoC Platforms". Signed-off-by: Lejun Zhu <lejun.zhu@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: pm8xxx-vibrator - add DT match tableStephen Boyd2014-03-301-1/+8
| | | | | | | | | | | | | | | | The driver is only supported on DT enabled platforms. Convert the driver to DT so that it can probe properly. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: pmic8xxx-pwrkey - migrate to DTStephen Boyd2014-03-301-13/+20
| | | | | | | | | | | | | | | | The driver is only supported on DT enabled platforms. Convert the driver to DT so that it can probe properly. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: pmic8xxx-keypad - migrate to DTStephen Boyd2014-03-301-64/+86
| | | | | | | | | | | | | | | | The driver is only supported on DT enabled platforms. Convert the driver to DT so that it can probe properly. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: pmic8xxx-keypad - migrate to regmap APIsStephen Boyd2014-03-301-52/+29
| | | | | | | | | | | | | | | | | | Use the regmap APIs for this driver instead of custom pm8xxx APIs. This breaks this driver's dependency on the pm8xxx APIs and allows us to easily port it to other bus protocols in the future. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: pmic8xxx-keypad - migrate to devm_* APIsStephen Boyd2014-03-301-44/+17
| | | | | | | | | | | | | | | | Simplify the error paths and reduce the lines of code in this driver by using the devm_* APIs. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: pmic8xxx-keypad - fix build by removing gpio configurationStephen Boyd2014-03-301-58/+0
| | | | | | | | | | | | | | | | | | | | | | The gpio configuration in this driver doesn't work because the gpio.h include doesn't exist. Remove the configuration as it isn't strictly necessary, allowing us to actually compile this driver. If it's needed in the future, it should be done via a pinctrl driver. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: add new driver for ARM CLPS711X keypadAlexander Shiyan2014-03-303-0/+220
| | | | | | | | | | | | | | | | | | This patch adds a new driver for keypad for Cirrus Logic CLPS711X CPUs. Target CPU contain keyboard interface which can scan 8 column lines, so we can read row GPIOs to read status and determine asserted state. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: edt-ft5x06 - add support for M09 firmware versionLothar Waßmann2014-03-281-82/+276
| | | | | | | | | | | | | | | | | | There is a new firmware version for the EDT-FT5x06 chip. Add support for detecting the firmware version and handle the differences appropriately. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: edt-ft5x06 - ignore touchdown eventsLothar Waßmann2014-03-281-0/+4
| | | | | | | | | | | | | | | | | | The chip may report invalid coordinates on touchdown events, so don't report the initial touchdown event. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: edt-ft5x06 - adjust delays to conform datasheetLothar Waßmann2014-03-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | The FT5x06 datasheet specifies a minimum reset width of 5ms and a delay between deassertion of reset and start of reporting of 300ms. Adjust the delays to conform to the datasheet. With the original delays I sometimes experienced communication timeouts when initializing the controller. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: edt-ft5x06 - add DT supportLothar Waßmann2014-03-281-31/+114
| | | | | | | | | | Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: edt-ft5x06 - several cleanups; no functional changeLothar Waßmann2014-03-281-9/+6
| | | | | | | | | | | | | | | | | | | | - remove redundant parens - remove redundant type casts - fix mixed tab/space indentation Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: appletouch - dial back fuzz settingClinton Sprain2014-03-281-6/+9
| | | | | | | | | | | | | | | | | | Let's dial back the default fuzz setting for most devices using this driver, based on values from user feedback from forums and bug reports. Signed-off-by: Clinton Sprain <clintonsprain@gmail.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: remove obsolete tnetv107x driversArnd Bergmann2014-03-286-734/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | The tnetv107x platform is getting removed, so the touchscreen and keypad drivers for this platform will no longer be needed either. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Kevin Hilman <khilman@linaro.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: linux-input@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: sirfsoc-onkey - set the capability of reporting KEY_POWERXianglong Du2014-03-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | commit a1a7521064428fc1cf8 moved to report EV_KEY event(KEY_POWER) instead of reporting EV_PWR event(KEY_SUSPEND), but it didn't enable the capability, so the KEY_POWER will not be reported to userspace by input core. this patch fixes the issue. Signed-off-by: Xianglong Du <Xianglong.Du@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: da9052_onkey - use correct register bit for key statusAnthony Olech2014-03-261-13/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | The wrong register bit of the DA9052/3 PMIC registers was used to determine the status on the ONKEY. Also a failure in reading the status register will no longer result in the work queue being rescheduled as that would result in a (potentially) endless retry. Signed-off-by: Anthony Olech <anthony.olech.opensource@diasemi.com> Acked-by: David Dajun Chen <david.chen@diasemi.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: wistron_btns - simplify dependenciesJean Delvare2014-03-231-1/+1
| | | | | | | | | | | | | | | | | | Kconfig symbol X86_32 was introduced in October 2005, it's about time to use it. This clears the last occurrence of the legacy "X86 && !X86_64" construct :-) Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: olpc_apsp - fix dependencies of OLPC AP-SP driverJean Delvare2014-03-231-1/+1
| | | | | | | | | | | | | | | | I don't think the OLPC AP-SP driver is generally useful without OLPC support. So make it depend on OLPC, unless build testing is enabled. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
OpenPOWER on IntegriCloud