summaryrefslogtreecommitdiffstats
path: root/drivers/input/misc/ixp4xx-beeper.c
Commit message (Collapse)AuthorAgeFilesLines
* input: misc: drop owner assignment from platform_driversWolfram Sang2014-10-201-1/+0
| | | | | | | A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* input: ixp4xx-beeper: don't use symbols from <mach/timex.h>Uwe Kleine-König2013-12-201-1/+1
| | | | | | | | | mach/timex.h is about to be dropped so don't use symbols defined in there. For ixp4xx there is a suitable substitute for IXP4XX_TIMER_FREQ, i.e. a global and exported variable that holds the same value. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
* input: misc: ixp4-beeper: use gpiolib strictlyLinus Walleij2013-09-271-2/+11
| | | | | | | | | | | | | Request and free the GPIO line used for the beeper properly. Then use the gpiolib API to flip the output of the GPIO pin instead of relying on hacks to poke the register bits. Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* input: misc: ixp4-beeper: switch to use gpiolibLinus Walleij2013-09-271-7/+5
| | | | | | | | | | | | | | | The platform using this beeper has support for gpiolib, so there is no point to use the custom gpio_line* API. A strange ambiguity where a line was first set as input and then driven high was solved by first driving the line high as output and then switch it to input. Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Input: ixp4xx-beeper - remove redundant platform_set_drvdata()Sachin Kamat2013-05-281-1/+0
| | | | | | | | | Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: ixp4xx-beeper - pass correct pointer to free_irq()Lars-Peter Clausen2013-05-231-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | free_irq() expects the same pointer that was passed to request_irq(), otherwise the IRQ is not freed. The issue was found using the following coccinelle script: <smpl> @r1@ type T; T devid; @@ request_irq(..., devid) @r2@ type r1.T; T devid; position p; @@ free_irq@p(..., devid) @@ position p != r2.p; @@ *free_irq@p(...) </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: remove use of __devexitBill Pemberton2012-11-241-1/+1
| | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: remove use of __devinitBill Pemberton2012-11-241-1/+1
| | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: remove use of __devexit_pBill Pemberton2012-11-241-1/+1
| | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: misc - use macro module_platform_driver()JJ Ding2011-11-301-12/+1
| | | | | | | | Commit 940ab88962bc1aff3273a8356d64577a6e386736 introduced a new macro to save some platform_driver boilerplate code. Use it. Signed-off-by: JJ Ding <dgdunix@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* Input: remove IRQF_DISABLED from driversYong Zhang2011-09-071-1/+1
| | | | | | | This flag is a NOOP and can be removed now. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* arm/ixp4xx: Rename FREQ macro to avoid collisionsBen Hutchings2011-02-061-5/+1
| | | | | | | | | | | | FREQ is a ridiculously short name for a platform-specific macro in a generic header, and it now conflicts with an enumeration in the gspca/ov519 driver. Also delete conditional reference to ixp4xx_get_board_tick_rate() which is not defined anywhere. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
* ixp4xx-beeper: Use IRQF_NO_SUSPEND not IRQF_TIMER for non-timer interruptIan Campbell2010-07-291-1/+2
| | | | | | | | | | | | ixp4xx_spkr_interrupt is not a timer interrupt and therefore should not use IRQF_TIMER. Use the recently introduced IRQF_NO_SUSPEND instead since that is the actual desired behaviour. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: linux-input@vger.kernel.org LKML-Reference: <1280398595-29708-2-git-send-email-ian.campbell@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King2008-08-071-1/+1
| | | | | | This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Remove asm/hardware.h, use asm/arch/hardware.h insteadRussell King2008-08-071-1/+1
| | | | | | | | | Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ixp4xx-beeper: add MODULE_ALIASAlessandro Zummo2008-03-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following patch allows ixp4xx-beeper to be loaded by udev automatically when compiled as a module with kernel versions 2.4.24 and greater. This patch is required because 43cc71eed1250755986da4c0f9898f9a635cb3bf ("platform: prefix MODALIAS with "platform:"") changed the modalias string to have the extra prefix. LKG7102D7:~# udevinfo -a -p /sys/devices/platform/ixp4xx-beeper.4 looking at device '/devices/platform/ixp4xx-beeper.4': KERNEL=="ixp4xx-beeper.4" SUBSYSTEM=="platform" DRIVER=="" ATTR{modalias}=="platform:ixp4xx-beeper" udev therefore tries to modprobe platform:ixp4xx-beeper instead of ixp4xx-beeper. LKG7102D7:~# udevtest /sys/devices/platform/ixp4xx-beeper.4 ... import_uevent_var: import into environment: 'PHYSDEVBUS=platform' import_uevent_var: import into environment: 'MODALIAS=platform:ixp4xx-beeper' main: looking at device '/devices/platform/ixp4xx-beeper.4' from subsystem 'platform' wait_for_sysfs: file '/sys/devices/platform/ixp4xx-beeper.4/bus' appeared after 0 loops main: run: 'socket:/org/kernel/udev/monitor' main: run: '/sbin/modprobe --use-blacklist platform:ixp4xx-beeper' With this patch, depmod adds an alias line (see below) to modules.alias which allows modprobe to load the right module. alias platform:ixp4xx-beeper ixp4xx-beeper Signed-off-by: Gordon Farquharson <gordonfarquharson@gmail.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* get rid of input BIT* duplicate definesJiri Slaby2007-10-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | get rid of input BIT* duplicate defines use newly global defined macros for input layer. Also remove includes of input.h from non-input sources only for BIT macro definiton. Define the macro temporarily in local manner, all those local definitons will be removed further in this patchset (to not break bisecting). BIT macro will be globally defined (1<<x) Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: <dtor@mail.ru> Acked-by: Jiri Kosina <jkosina@suse.cz> Cc: <lenb@kernel.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Cc: <perex@suse.cz> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: <vernux@us.ibm.com> Cc: <malattia@linux.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Fix ixp4xx compile errorFrederik Deweerdt2007-05-101-1/+1
| | | | | | | | | | | | drivers/input/misc/ixp4xx-beeper.c: In function 'ixp4xx_spkr_event': drivers/input/misc/ixp4xx-beeper.c:54: error: 'input_dev' undeclared (first use in this function) drivers/input/misc/ixp4xx-beeper.c:54: error: (Each undeclared identifier is reported only once drivers/input/misc/ixp4xx-beeper.c:54: error: for each function it appears in.) Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Input: misc devices - switch to using input_dev->dev.parentDmitry Torokhov2007-04-121-1/+1
| | | | | | | | In preparation for struct class_device -> struct device input core conversion, switch to using input_dev->dev.parent when specifying device position in sysfs tree. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* Input: drivers/input/misc - don't access dev->private directlyDmitry Torokhov2007-04-121-4/+5
| | | | | | Use input_get_drvdata() and input_set_drvdata() instead. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells2006-10-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
* [PATCH] irq-flags: misc drivers: Use the new IRQF_ constantsThomas Gleixner2006-07-021-1/+1
| | | | | | | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Input: ixp4xx-beeper - fix compile errorAlessandro Zummo2006-02-151-0/+1
| | | | | Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* Input: add ixp4xx beeper driverAlessandro Zummo2006-01-291-0/+183
This is a driver for beeper found in LinkSys NSLU2 boxes. It should work on any ixp4xx based platform. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
OpenPOWER on IntegriCloud