summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
Commit message (Collapse)AuthorAgeFilesLines
...
| * | i2c: rcar: add slave supportWolfram Sang2014-12-111-9/+115
| | | | | | | | | | | | | | | | | | | | | The first I2C slave provider using the new generic interface. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: slave-eeprom: add eeprom simulator driverWolfram Sang2014-12-113-0/+181
| | | | | | | | | | | | | | | | | | | | | | | | | | | The first user of the i2c-slave interface is an eeprom simulator. It is a shared memory which can be accessed by the remote master via I2C and locally via sysfs. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: core changes for slave supportWolfram Sang2014-12-111-0/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Finally(!), make Linux support being an I2C slave. Most of the existing infrastructure is reused. We mainly add i2c_slave_register/unregister() calls which tells i2c bus drivers to activate the slave mode. Then, they also get a callback to report slave events to. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: davinci: switch to use platform_get_irqGrygorii Strashko2014-12-041-8/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Switch Davinci I2C driver to use platform_get_irq(), because it is not recommened to use platform_get_resource(pdev, IORESOURCE_IRQ, ..) for requesting IRQ resources any more, as they can be not ready yet in case of DT-boot. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: sh_mobile: optimize irq entryWolfram Sang2014-12-041-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We can simply pass the pointer to the private structure to the irq routine instead of passing the platform device and looking up its driver_data. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: pxa: add support for SCCB devicesPetr Cvek2014-11-251-7/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for SCCB by implementing I2C_M_IGNORE_NAK and I2C_M_STOP flags and advertising functionality flag I2C_FUNC_PROTOCOL_MANGLING. Also fixed missing functionality flag I2C_FUNC_NOSTART. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | omap: i2c: don't check bus state IP rev3.3 and earlierAlexander Kochetkov2014-11-251-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 0f5768bf894f ("i2c: omap: implement workaround for handling invalid BB-bit values") introduce the error result in boot test fault on OMAP3530 boards. The patch fix the error (disable i2c bus test for OMAP3530). Reported-by: Kevin Hilman <khilman@kernel.org> Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Fixes: 0f5768bf894f ("i2c: omap: implement workaround for handling invalid BB-bit values") Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: s3c2410: Handle i2c sys_cfg register in i2c driverPankaj Dubey2014-11-241-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let's handle i2c interrupt re-configuration in i2c driver. This will help us in removing some soc specific checks from machine files and will help in removing static iomapping of SYS register in exynos.c Also handle saving and restoring of SYS_I2C_CFG register during suspend and resume of i2c driver. Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: rk3x: add Kconfig dependency on COMMON_CLKMax Schwarz2014-11-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we are using the clk notifier framework we get compile errors without COMMON_CLK. But the driver fails to probe without COMMON_CLK anyways, so just add that as a Kconfig dependency. Signed-off-by: Max Schwarz <max.schwarz@online.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: omap: add notes related to i2c multimaster modeAlexander Kochetkov2014-11-231-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | No functional changes. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: omap: don't reset controller if Arbitration Lost detectedAlexander Kochetkov2014-11-231-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Arbitration Lost is an expected situation in a multimaster environment. I2C controller (IP) correctly detect and report AL. The only one visible reason for resetting IP in the AL case is to avoid advisory 1.94 (omap3) and errata i595 (omap4): "I2C: After an Arbitration is Lost the Module Incorrectly Starts the Next Transfer". Errata workaround states: "The MST and STT bits inside I2C_CON should be set to 1 at the same moment (avoid setting the MST bit to 1 while STT = 0)." The driver never set MST and STT bits separately and doesn't create condition for errata. So the reset is not necessary. Also corrected return value for AL to -EAGAIN. Tested on Beagleboard XM C. Tested on BBB and AM437x Starter Kit by Felipe Balbi. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Tested-by: Felipe Balbi <balbi@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: omap: implement workaround for handling invalid BB-bit valuesAlexander Kochetkov2014-11-231-0/+103
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In a multimaster environment, after IP software reset, BB-bit value doesn't correspond to the current bus state. It may happen what BB-bit will be 0, while the bus is busy due to another I2C master activity. Any transfer started when BB=0 and bus is busy wouldn't be completed by IP and results in controller timeout. More over, in some cases IP could interrupt another master's transfer and corrupt data on wire. The commit implement method allowing to prevent IP from entering into "controller timeout" state and from "data corruption" state. The one drawback is the need to wait for 10ms before the first transfer. Tested on Beagleboard XM C. Tested on BBB and AM437x Starter Kit by Felipe Balbi. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Tested-by: Felipe Balbi <balbi@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: omap: cleanup register definitionsAlexander Kochetkov2014-11-231-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Delete STAT_AD0 mask as unrelated to current IP (omap1?). Delete DEBUG conditional around SYSTEST masks group. Add SYSTEST functional mode masks for SCL and SDA. Add STAT_BF mask. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Tested-by: Felipe Balbi <balbi@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: rk3x: handle dynamic clock rate changes correctlyMax Schwarz2014-11-231-35/+118
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The i2c input clock can change dynamically, e.g. on the RK3066 where pclk_i2c0 and pclk_i2c1 are connected to the armclk, which changes rate on cpu frequency scaling. Until now, we incorrectly called clk_get_rate() while holding the i2c->lock in rk3x_i2c_xfer() to adapt to clock rate changes. Thanks to Huang Tao for reporting this issue. Do it properly now using the clk notifier framework. The callback logic was taken from i2c-cadence.c. Also rename all misleading "i2c_rate" variables to "clk_rate", as they describe the *input* clk rate. Signed-off-by: Max Schwarz <max.schwarz@online.de> Tested-by: Doug Anderson <dianders@chromium.org> on RK3288 Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: at91: enable probe deferring on dma channel requestLudovic Desroches2014-11-231-11/+14
| | | | | | | | | | | | | | | | | | | | | | | | If dma controller is not probed, defer i2c probe. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: at91: remove legacy DMA supportArnd Bergmann2014-11-211-34/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Since at91sam9g45 is now DT-only, all DMA capable users of this driver are using the DT case, and the legacy support can be removed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: sh_mobile: use proper device for mapping DMA memoryWolfram Sang2014-11-191-9/+14
| | | | | | | | | | | | | | | | | | | | | | | | It should be the DMA device, not the platform device. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: imx: simplify i2c_imx_dma_write() a littleWolfram Sang2014-11-191-5/+1
| | | | | | | | | | | | | | | Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Yao Yuan <yao.yuan@freescale.com>
| * | i2c: img-scb: Allow building for MIPSAndrew Bresticker2014-11-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SCB is present on IMG SoCs other than the META-based TZ1090, such as the MIPS-based Pistachio SoC. Relax the Kconfig dependency so that it can be built on any MIPS or META machine. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: add support for Amlogic Meson I2C controllerBeniamino Galvani2014-11-183-0/+500
| | | | | | | | | | | | | | | | | | | | | This is a driver for the I2C controller found in Amlogic Meson SoCs. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: mux: create "channel-n" symlinks for child segments in the mux deviceGerlando Falauto2014-11-181-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This makes the topology clearer. For instance, by adding a pca9547 device with address 0x70 to bus i2c-0, you get: /sys/class/i2c-dev/i2c-0/device/0-0070/channel-0 -> i2c-1 ... /sys/class/i2c-dev/i2c-0/device/0-0070/channel-7 -> i2c-8 Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> [wsa: simplified sysfs-usage and fixed format string usage] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Martin Belanger <martin.belanger@cyaninc.com> Acked-by: Danielle Costantino <danielle.costantino@gmail.com>
| * | i2c: mux: create symlink to actual mux deviceWolfram Sang2014-11-181-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current implementation creates muxed i2c-<n> busses as immediate children of their i2c-<n> parent bus. In case of multiple muxes on one bus, it is impossible to determine which muxed bus comes from which mux. It could be argued that the parent device should be changed from the parent adapter to the mux device. This has pros and cons. To improve the topology, simply add a "mux_device" symlink pointing to the actual muxing device, so we can distinguish muxed busses. Doing it this way, we don't break the ABI. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Tested-by: Guenter Roeck <linux@roeck-us.net>
| * | i2c: acpi: remove unneeded variable initializationWolfram Sang2014-11-181-1/+1
| | | | | | | | | | | | | | | | | | | | | No need to initialize 'ret' if it gets assigned directly after that. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
| * | i2c: imx: add DMA support for freescale i2c driverYao Yuan2014-11-181-2/+333
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add dma support for i2c. This function depend on DMA driver. You can turn on it by write both the dmas and dma-name properties in dts node. DMA is optional, even DMA request unsuccessfully, i2c can also work well. Signed-off-by: Yuan Yao <yao.yuan@freescale.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: imx: Sort include headers alphabeticallyYao Yuan2014-11-181-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the inlcude headers aren't sorted alphabetically, then the logical choice is to append new ones, however that creates a lot of potential for conflicts or duplicates because every change will then add new includes in the same location. Signed-off-by: Yuan Yao <yao.yuan@freescale.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: core: Fix probing of i2c slaves without interruptsGeert Uytterhoeven2014-11-171-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 2fd36c55264926e2 ("i2c: core: Map OF IRQ at probe time"), i2c slaves without interrupts (e.g. da9210 and at24 on r8a7791/koelsch) fail to probe: at24: probe of 2-0050 failed with error -22 da9210: probe of 6-0068 failed with error -22 This happens because the call to of_irq_get() in i2c_device_probe() returns -EINVAL. If a device node does not have an "interrupts" property, of_irq_parse_one() fails. Unlike irq_of_parse_and_map(), of_irq_get() does not ignore errors from of_irq_parse_one(), but forwards them. Make i2c_device_probe() ignore all errors but -EPROBE_DEFER to fix this, just like platform_get_irq() and platform_get_irq_byname() already do. Fixes: 2fd36c55264926e2 ("i2c: core: Map OF IRQ at probe time") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: img-scb: Add Imagination Technologies I2C SCB driverJames Hogan2014-11-173-0/+1423
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the IMG I2C Serial Control Bus (SCB) found on the Pistachio and TZ1090 SoCs. Reviewed-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: James Hogan <james.hogan@imgtec.com> [Ezequiel: code cleaning and rebasing] Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: xiic: Fix big-endian register accessThomas Gessler2014-11-171-5/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver tried to access device registers with the (little-endian) iowrite/ioread functions. While this worked on little-endian machines (e.g. Microblaze with AXI bus), it made the driver unusable on big-endian machines (e.g. PPC405 with PLB). During the probe function, the driver tried to write a 32-bit reset mask into the reset register. This caused an error interrupt on big-endian systems, because the device detected an invalid (byte-swapped) reset mask. The result was an Oops. The patch implements an endianness detection similar to the one used in other Xilinx drivers like drivers/spi/spi-xilinx.c. It was tested on a PPC405/PLB system. Signed-off-by: Thomas Gessler <Thomas.Gessler@exp2.physik.uni-giessen.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: i801: Add DeviceIDs for SunrisePoint LPDevin Ryles2014-11-122-0/+4
| | | | | | | | | | | | | | | | | | Signed-off-by: Devin Ryles <devin.ryles@intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: sh_mobile: improve success messageWolfram Sang2014-11-121-3/+3
| | | | | | | | | | | | | | | | | | | | | No user needs magic hex values, makes this debug output. Add DMA info. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: sh_mobile: add DMA supportWolfram Sang2014-11-121-10/+185
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make it possible to transfer i2c message buffers via DMA. Start/Stop/Sending_Slave_Address is still handled using the old state machine, it is sending the actual data that is done via DMA. This is least intrusive and allows us to work with the message buffers directly instead of preparing a custom buffer which involves copying the data around. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> [wsa: fixed an uninitialized var problem] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: sh_mobile: sort includes alphabeticallyWolfram Sang2014-11-121-9/+9
| | | | | | | | | | | | | | | | | | | | | Improves readability and reduces chances of duplicates. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: at91: adopt pinctrl supportWenyou Yang2014-11-121-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Amend the at91 i2c pin controller to set the state of the pins to: - "default" on resume. - "sleep" on suspend(). This should make it possible to optimize energy usage for the pins both for the suspend/resume cycle Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: mpc: report correct I2C error return codesDanielle Costantino2014-11-121-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enforces correct I2C error returned codes from Freescale's MPC i2c bus driver, allowing for proper user-space/kernel error handling. Signed-off-by: Danielle Costantino <danielle.costantino@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: i801: Drop useless debug messageJean Delvare2014-11-121-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | Don't log the host status register value in i801_isr(), it has very little value and fills up the log when debugging is enabled. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: i801: Check if interrupts are disabledJean Delvare2014-11-121-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | There is a control bit in the PCI configuration space which disables interrupts. If this bit is set, the driver should not try to make use of interrupts, it won't receive any. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: i801: Fallback to polling if request_irq() failsJean Delvare2014-11-121-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | The i2c-i801 driver can work without interrupts, so there is no reason to make a request_irq failure fatal. Instead we can simply fallback to polling. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: i801: Use wait_event_timeout to wait for interruptsJean Delvare2014-11-121-3/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | Some systems have been reported to have trouble with interrupts. Use wait_event_timeout() instead of wait_event() so we don't get stuck in that case, and log the problem. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: rk3x: adjust the LOW divison based on characteristics of SCLaddy ke2014-11-101-9/+153
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As show in I2C specification: - Standard-mode: the minimum HIGH period of the scl clock is 4.0us the minimum LOW period of the scl clock is 4.7us - Fast-mode: the minimum HIGH period of the scl clock is 0.6us the minimum LOW period of the scl clock is 1.3us I have measured i2c SCL waveforms in fast-mode by oscilloscope on rk3288-pinky board. the LOW period of the scl clock is 1.3us. It is so critical that we must adjust LOW division to increase the LOW period of the scl clock. Thanks Doug for the suggestion about division formulas. Signed-off-by: Addy Ke <addy.ke@rock-chips.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Max Schwarz <max.schwarz@online.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: davinci: don't use interruptible completionMike Looijmans2014-11-101-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a signal is caught while the i2c-davinci bus driver is transferring, the driver just "abandons" the transfer and leaves the controller to fend for itself. The next I2C transaction will find the controller in an undefined state and often results in a stream of "initiating i2c bus recovery" messages until the controller arrives in a defined state. This behaviour also sends out "half" or possibly even mixed messages to I2C client devices which may put them in an undesired state as well. So, let's get simply uninterruptible. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: at91: add support for system PMWenyou Yang2014-11-101-0/+26
| | | | | | | | | | | | | | | | | | Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: at91: add support for runtime PMWenyou Yang2014-11-101-6/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Drivers should put the device into low power states proactively whenever the device is not in use. Thus implement support for runtime PM and use the autosuspend feature to make sure that we can still perform well in case we see lots of i2c traffic within short period of time. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: exynos5: use proper errno for timeoutWolfram Sang2014-11-101-2/+2
| | | | | | | | | | | | Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: core: Map OF IRQ at probe timeLaurent Pinchart2014-11-101-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I2C clients instantiated from OF get their IRQ mapped at device registration time. This leads to the IRQ being silently ignored if the related irqchip hasn't been proved yet. Fix this by moving IRQ mapping at probe time using of_get_irq(). The function operates as irq_of_parse_and_map() but additionally returns -EPROBE_DEFER if the irqchip isn't available, allowing us to defer I2C client probing. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: sh_mobile: Add support for r8a73a4 and sh73a0Geert Uytterhoeven2014-11-101-6/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for r8a73a4 (R-Mobile APE6) and sh73a0 (SH-Mobile AG5). On these SoCs, the operating clock runs faster that on previous SoCs, and the internal SCL clock counter gets incremented every 2 clocks of the operating clock, just like on R-Car Gen2. Cfr. the "/2" in the calculation of ICCL/ICCH in section "I2C Bus Interface (IIC)", subsection "Transfer Rate" of the datasheets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: imx+mxs: Use the preferred form for passing a size of a structFabio Estevam2014-11-102-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to Documentation/CodingStyle - Chapter 14: "The preferred form for passing a size of a struct is the following: p = kmalloc(sizeof(*p), ...); The alternative form where struct name is spelled out hurts readability and introduces an opportunity for a bug when the pointer variable type is changed but the corresponding sizeof that is passed to a memory allocator is not." So do it as recommeded. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* | | Merge tag 'devicetree-for-linus' of ↵Linus Torvalds2014-12-111-45/+104
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux Pull devicetree changes from Grant Likely: "Lots of activity in the devicetree code for v3.18. Most of it is related to getting all of the overlay support code in place, but there are other important things in there. Highlights: - OF_RECONFIG notifiers for SPI, I2C and Platform devices. Those subsystems can now respond to live changes to the device tree. - CONFIG_OF_OVERLAY method for applying live changes to the device tree - Removal of the of_allnodes list. This used to be used to iterate over all the nodes in the device tree, but it is unnecessary because the same thing can be done by iterating over the list of child pointers. Getting rid of of_allnodes saves some memory and avoids the possibility of of_allnodes being sorted differently from the child lists. - Support for retrieving original DTB blob via sysfs. Needed by kexec. - More unittests - Documentation and minor bug fixes" * tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux: (42 commits) of: Delete unnecessary check before calling "of_node_put()" of: Drop ->next pointer from struct device_node spi: Check for spi_of_notifier when CONFIG_OF_DYNAMIC=y of: support passing console options with stdout-path of: add optional options parameter to of_find_node_by_path() of: Add bindings for chosen node, stdout-path of: Remove unneeded and incorrect MODULE_DEVICE_TABLE ARM: dt: fix up PL011 device tree bindings of: base, fix of_property_read_string_helper kernel-doc of: remove select of non-existant OF_DEVICE config symbol spi/of: Add OF notifier handler spi/of: Create new device registration method and accessors i2c/of: Add OF_RECONFIG notifier handler i2c/of: Factor out Devicetree registration code of/overlay: Add overlay unittests of/overlay: Introduce DT overlay support of/reconfig: Add OF_DYNAMIC notifier for platform_bus_type of/reconfig: Always use the same structure for notifiers of/reconfig: Add debug output for OF_RECONFIG notifiers of/reconfig: Add empty stubs for the of_reconfig methods ...
| * | | i2c/of: Add OF_RECONFIG notifier handlerPantelis Antoniou2014-11-251-0/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_OF_DYNAMIC enables runtime changes to the device tree which in turn may trigger addition or removal of devices from Linux. Add an OF_RECONFIG notifier handler to receive tree change events and to creating or destroy i2c devices as required. Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> [grant.likely: clean up #ifdefs and drop unneeded error handling] Signed-off-by: Grant Likely <grant.likely@linaro.org> Reviewed-by: Wolfram Sang <wsa@the-dreams.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-i2c@vger.kernel.org
| * | | i2c/of: Factor out Devicetree registration codePantelis Antoniou2014-11-251-45/+52
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Dynamically inserting i2c client device nodes requires the use of a single device registration method. Factor out the loop body of of_i2c_register_devices() so that it can be called for individual device_nodes instead of for all the children of a node. Note: The diff of this commit looks far more complicated than it actually is due the indentation being changed for a large block of code. When viewed using the diff -w flag to ignore whitespace changes it can be seen that the change is actually quite simple. Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> [grant.likely: Made new function static and removed changes to header] Signed-off-by: Grant Likely <grant.likely@linaro.org> Reviewed-by: Wolfram Sang <wsa@the-dreams.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-i2c@vger.kernel.org
* | | Merge tag 'pm+acpi-3.19-rc1' of ↵Linus Torvalds2014-12-104-4/+3
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "This time we have some more new material than we used to have during the last couple of development cycles. The most important part of it to me is the introduction of a unified interface for accessing device properties provided by platform firmware. It works with Device Trees and ACPI in a uniform way and drivers using it need not worry about where the properties come from as long as the platform firmware (either DT or ACPI) makes them available. It covers both devices and "bare" device node objects without struct device representation as that turns out to be necessary in some cases. This has been in the works for quite a few months (and development cycles) and has been approved by all of the relevant maintainers. On top of that, some drivers are switched over to the new interface (at25, leds-gpio, gpio_keys_polled) and some additional changes are made to the core GPIO subsystem to allow device drivers to manipulate GPIOs in the "canonical" way on platforms that provide GPIO information in their ACPI tables, but don't assign names to GPIO lines (in which case the driver needs to do that on the basis of what it knows about the device in question). That also has been approved by the GPIO core maintainers and the rfkill driver is now going to use it. Second is support for hardware P-states in the intel_pstate driver. It uses CPUID to detect whether or not the feature is supported by the processor in which case it will be enabled by default. However, it can be disabled entirely from the kernel command line if necessary. Next is support for a platform firmware interface based on ACPI operation regions used by the PMIC (Power Management Integrated Circuit) chips on the Intel Baytrail-T and Baytrail-T-CR platforms. That interface is used for manipulating power resources and for thermal management: sensor temperature reporting, trip point setting and so on. Also the ACPI core is now going to support the _DEP configuration information in a limited way. Basically, _DEP it supposed to reflect off-the-hierarchy dependencies between devices which may be very indirect, like when AML for one device accesses locations in an operation region handled by another device's driver (usually, the device depended on this way is a serial bus or GPIO controller). The support added this time is sufficient to make the ACPI battery driver work on Asus T100A, but it is general enough to be able to cover some other use cases in the future. Finally, we have a new cpufreq driver for the Loongson1B processor. In addition to the above, there are fixes and cleanups all over the place as usual and a traditional ACPICA update to a recent upstream release. As far as the fixes go, the ACPI LPSS (Low-power Subsystem) driver for Intel platforms should be able to handle power management of the DMA engine correctly, the cpufreq-dt driver should interact with the thermal subsystem in a better way and the ACPI backlight driver should handle some more corner cases, among other things. On top of the ACPICA update there are fixes for race conditions in the ACPICA's interrupt handling code which might lead to some random and strange looking failures on some systems. In the cleanups department the most visible part is the series of commits targeted at getting rid of the CONFIG_PM_RUNTIME configuration option. That was triggered by a discussion regarding the generic power domains code during which we realized that trying to support certain combinations of PM config options was painful and not really worth it, because nobody would use them in production anyway. For this reason, we decided to make CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and that lead to the conclusion that the latter became redundant and CONFIG_PM could be used instead of it. The material here makes that replacement in a major part of the tree, but there will be at least one more batch of that in the second part of the merge window. Specifics: - Support for retrieving device properties information from ACPI _DSD device configuration objects and a unified device properties interface for device drivers (and subsystems) on top of that. As stated above, this works with Device Trees and ACPI and allows device drivers to be written in a platform firmware (DT or ACPI) agnostic way. The at25, leds-gpio and gpio_keys_polled drivers are now going to use this new interface and the GPIO subsystem is additionally modified to allow device drivers to assign names to GPIO resources returned by ACPI _CRS objects (in case _DSD is not present or does not provide the expected data). The changes in this set are mostly from Mika Westerberg, Rafael J Wysocki, Aaron Lu, and Darren Hart with some fixes from others (Fabio Estevam, Geert Uytterhoeven). - Support for Hardware Managed Performance States (HWP) as described in Volume 3, section 14.4, of the Intel SDM in the intel_pstate driver. CPUID is used to detect whether or not the feature is supported by the processor. If supported, it will be enabled automatically unless the intel_pstate=no_hwp switch is present in the kernel command line. From Dirk Brandewie. - New Intel Broadwell-H ID for intel_pstate (Dirk Brandewie). - Support for firmware interface based on ACPI operation regions used by the PMIC chips on the Intel Baytrail-T and Baytrail-T-CR platforms for power resource control and thermal management (Aaron Lu). - Limited support for retrieving off-the-hierarchy dependencies between devices from ACPI _DEP device configuration objects and deferred probing support for the ACPI battery driver based on the _DEP information to make that driver work on Asus T100A (Lan Tianyu). - New cpufreq driver for the Loongson1B processor (Kelvin Cheung). - ACPICA update to upstream revision 20141107 which only affects tools (Bob Moore). - Fixes for race conditions in the ACPICA's interrupt handling code and in the ACPI code related to system suspend and resume (Lv Zheng and Rafael J Wysocki). - ACPI core fix for an RCU-related issue in the ioremap() regions management code that slowed down significantly after CPUs had been allowed to enter idle states even if they'd had RCU callbakcs queued and triggered some problems in certain proprietary graphics driver (and elsewhere). The fix replaces synchronize_rcu() in that code with synchronize_rcu_expedited() which makes the issue go away. From Konstantin Khlebnikov. - ACPI LPSS (Low-Power Subsystem) driver fix to handle power management of the DMA engine included into the LPSS correctly. The problem is that the DMA engine doesn't have ACPI PM support of its own and it simply is turned off when the last LPSS device having ACPI PM support goes into D3cold. To work around that, the PM domain used by the ACPI LPSS driver is redesigned so at least one device with ACPI PM support will be on as long as the DMA engine is in use. From Andy Shevchenko. - ACPI backlight driver fix to avoid using it on "Win8-compatible" systems where it doesn't work and where it was used by default by mistake (Aaron Lu). - Assorted minor ACPI core fixes and cleanups from Tomasz Nowicki, Sudeep Holla, Huang Rui, Hanjun Guo, Fabian Frederick, and Ashwin Chaugule (mostly related to the upcoming ARM64 support). - Intel RAPL (Running Average Power Limit) power capping driver fixes and improvements including new processor IDs (Jacob Pan). - Generic power domains modification to power up domains after attaching devices to them to meet the expectations of device drivers and bus types assuming devices to be accessible at probe time (Ulf Hansson). - Preliminary support for controlling device clocks from the generic power domains core code and modifications of the ARM/shmobile platform to use that feature (Ulf Hansson). - Assorted minor fixes and cleanups of the generic power domains core code (Ulf Hansson, Geert Uytterhoeven). - Assorted minor fixes and cleanups of the device clocks control code in the PM core (Geert Uytterhoeven, Grygorii Strashko). - Consolidation of device power management Kconfig options by making CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and removing the latter which is now redundant (Rafael J Wysocki and Kevin Hilman). That is the first batch of the changes needed for this purpose. - Core device runtime power management support code cleanup related to the execution of callbacks (Andrzej Hajda). - cpuidle ARM support improvements (Lorenzo Pieralisi). - cpuidle cleanup related to the CPUIDLE_FLAG_TIME_VALID flag and a new MAINTAINERS entry for ARM Exynos cpuidle (Daniel Lezcano and Bartlomiej Zolnierkiewicz). - New cpufreq driver callback (->ready) to be executed when the cpufreq core is ready to use a given policy object and cpufreq-dt driver modification to use that callback for cooling device registration (Viresh Kumar). - cpufreq core fixes and cleanups (Viresh Kumar, Vince Hsu, James Geboski, Tomeu Vizoso). - Assorted fixes and cleanups in the cpufreq-pcc, intel_pstate, cpufreq-dt, pxa2xx cpufreq drivers (Lenny Szubowicz, Ethan Zhao, Stefan Wahren, Petr Cvek). - OPP (Operating Performance Points) framework modification to allow OPPs to be removed too and update of a few cpufreq drivers (cpufreq-dt, exynos5440, imx6q, cpufreq) to remove OPPs (added during initialization) on driver removal (Viresh Kumar). - Hibernation core fixes and cleanups (Tina Ruchandani and Markus Elfring). - PM Kconfig fix related to CPU power management (Pankaj Dubey). - cpupower tool fix (Prarit Bhargava)" * tag 'pm+acpi-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (120 commits) i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM tools: cpupower: fix return checks for sysfs_get_idlestate_count() drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM e1000e / igb / PM: Eliminate CONFIG_PM_RUNTIME MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM MFD / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM leds: leds-gpio: Fix multiple instances registration without 'label' property iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hsi / OMAP / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM gpio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hwrandom / exynos / PM: Use CONFIG_PM in #ifdef block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM USB / PM: Drop CONFIG_PM_RUNTIME from the USB core PM: Merge the SET*_RUNTIME_PM_OPS() macros ...
OpenPOWER on IntegriCloud