summaryrefslogtreecommitdiffstats
path: root/drivers/gpu
Commit message (Collapse)AuthorAgeFilesLines
* drivers/drm/ast: Switch SCU to VGA output on POSTJeremy Kerr2017-07-181-0/+33
| | | | | | | | | On AST BMC platforms, the BMC may be using the VGA device for UART mirroring. In this case, we need to switch the DAC output to VGA mode. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
* drm/virtio: don't leak bo on drm_gem_object_init failureGerd Hoffmann2017-07-151-1/+3
| | | | | | | | | | commit 385aee965b4e4c36551c362a334378d2985b722a upstream. Reported-by: 李强 <liqiang6-s@360.cn> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170406155941.458-1-kraxel@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/amdgpu: check ring being ready before usingDing Pixel2017-07-051-0/+7
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit c5f21c9f878b8dcd54d0b9739c025ca73cb4c091 ] Return success when the ring is properly initialized, otherwise return failure. Tonga SRIOV VF doesn't have UVD and VCE engines, the initialization of these IPs is bypassed. The system crashes if application submit IB to their rings which are not ready to use. It could be a common issue if IP having ring buffer is disabled for some reason on specific ASIC, so it should check the ring being ready to use. Bug: amdgpu_test crashes system on Tonga VF. Signed-off-by: Ding Pixel <Pixel.Ding@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/vmwgfx: Free hash table allocated by cmdbuf managed res mgrDeepak Rawat2017-07-051-0/+1
| | | | | | | | | | | | | | | | | commit 82fcee526ba8ca2c5d378bdf51b21b7eb058fe3a upstream. The hash table created during vmw_cmdbuf_res_man_create was never freed. This causes memory leak in context creation. Added the corresponding drm_ht_remove in vmw_cmdbuf_res_man_destroy. Tested for memory leak by running piglit overnight and kernel memory is not inflated which earlier was. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/ast: Handle configuration without P2A bridgeRussell Currey2017-07-053-109/+168
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 71f677a91046599ece96ebab21df956ce909c456 upstream. The ast driver configures a window to enable access into BMC memory space in order to read some configuration registers. If this window is disabled, which it can be from the BMC side, the ast driver can't function. Closing this window is a necessity for security if a machine's host side and BMC side are controlled by different parties; i.e. a cloud provider offering machines "bare metal". A recent patch went in to try to check if that window is open but it does so by trying to access the registers in question and testing if the result is 0xffffffff. This method will trigger a PCIe error when the window is closed which on some systems will be fatal (it will trigger an EEH for example on POWER which will take out the device). This patch improves this in two ways: - First, if the firmware has put properties in the device-tree containing the relevant configuration information, we use these. - Otherwise, a bit in one of the SCU scratch registers (which are readable via the VGA register space and writeable by the BMC) will indicate if the BMC has closed the window. This bit has been defined by Y.C Chen from Aspeed. If the window is closed and the configuration isn't available from the device-tree, some sane defaults are used. Those defaults are hopefully sufficient for standard video modes used on a server. Signed-off-by: Russell Currey <ruscur@russell.cc> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Dave Airlie <airlied@redhat.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/amdgpu: adjust default display clockAlex Deucher2017-06-291-0/+4
| | | | | | | | | | | | | | | commit 52b482b0f4fd6d5267faf29fe91398e203f3c230 upstream. Increase the default display clock on newer asics to accomodate some high res modes with really high refresh rates. bug: https://bugs.freedesktop.org/show_bug.cgi?id=93826 Acked-by: Chunming Zhou <david1.zhou@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/amdgpu/atom: fix ps allocation size for EnableDispPowerGatingAlex Deucher2017-06-291-2/+2
| | | | | | | | | | | | | | commit 05b4017b37f1fce4b7185f138126dd8decdb381f upstream. We were using the wrong structure which lead to an overflow on some boards. bug: https://bugs.freedesktop.org/show_bug.cgi?id=101387 Acked-by: Chunming Zhou <david1.zhou@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/radeon: add a quirk for Toshiba Satellite L20-183Alex Deucher2017-06-291-0/+7
| | | | | | | | | | | | commit acfd6ee4fa7ebeee75511825fe02be3f7ac1d668 upstream. Fixes resume from suspend. bug: https://bugzilla.kernel.org/show_bug.cgi?id=196121 Reported-by: Przemek <soprwa@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/radeon: add a PX quirk for another K53TK variantAlex Deucher2017-06-291-0/+4
| | | | | | | | | | | | commit 4eb59793cca00b0e629b6d55b5abb5acb82c5868 upstream. Disable PX on these systems. bug: https://bugs.freedesktop.org/show_bug.cgi?id=101491 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/ast: Fixed system hanged if disable P2AY.C. Chen2017-06-173-79/+97
| | | | | | | | | | | | | | [ Upstream commit 6c971c09f38704513c426ba6515f22fb3d6c87d5 ] The original ast driver will access some BMC configuration through P2A bridge that can be disabled since AST2300 and after. It will cause system hanged if P2A bridge is disabled. Here is the update to fix it. Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/nouveau: Don't enabling polling twice on runtime resumeLyude Paul2017-06-172-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit cae9ff036eea577856d5b12860b4c79c5e71db4a ] As it turns out, on cards that actually have CRTCs on them we're already calling drm_kms_helper_poll_enable(drm_dev) from nouveau_display_resume() before we call it in nouveau_pmops_runtime_resume(). This leads us to accidentally trying to enable polling twice, which results in a potential deadlock between the RPM locks and drm_dev->mode_config.mutex if we end up trying to enable polling the second time while output_poll_execute is running and holding the mode_config lock. As such, make sure we only enable polling in nouveau_pmops_runtime_resume() if we need to. This fixes hangs observed on the ThinkPad W541 Signed-off-by: Lyude <lyude@redhat.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Kilian Singer <kilian.singer@quantumtechnology.info> Cc: Lukas Wunner <lukas@wunner.de> Cc: David Airlie <airlied@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/nouveau/fence/g84-: protect against concurrent access to semaphore buffersBen Skeggs2017-06-172-0/+7
| | | | | | | | [ Upstream commit 96692b097ba76d0c637ae8af47b29c73da33c9d0 ] Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/nouveau: prevent userspace from deleting client objectBen Skeggs2017-06-171-1/+2
| | | | | | | | [ Upstream commit c966b6279f610a24ac1d42dcbe30e10fa61220b2 ] Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/nouveau/tmr: fully separate alarm execution/pending listsBen Skeggs2017-06-142-3/+5
| | | | | | | | | | | | | | | commit b4e382ca7586a63b6c1e5221ce0863ff867c2df6 upstream. Reusing the list_head for both is a bad idea. Callback execution is done with the lock dropped so that alarms can be rescheduled from the callback, which means that with some unfortunate timing, lists can get corrupted. The execution list should not require its own locking, the single function that uses it can only be called from a single context. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/vmwgfx: Make sure backup_handle is always validSinclair Yeh2017-06-141-7/+11
| | | | | | | | | | | | | | | | | commit 07678eca2cf9c9a18584e546c2b2a0d0c9a3150c upstream. When vmw_gb_surface_define_ioctl() is called with an existing buffer, we end up returning an uninitialized variable in the backup_handle. The fix is to first initialize backup_handle to 0 just to be sure, and second, when a user-provided buffer is found, we will use the req->buffer_handle as the backup_handle. Reported-by: Murray McAllister <murray.mcallister@insomniasec.com> Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/vmwgfx: limit the number of mip levels in vmw_gb_surface_define_ioctl()Vladis Dronov2017-06-141-0/+3
| | | | | | | | | | | | | | | | commit ee9c4e681ec4f58e42a83cb0c22a0289ade1aacf upstream. The 'req->mip_levels' parameter in vmw_gb_surface_define_ioctl() is a user-controlled 'uint32_t' value which is used as a loop count limit. This can lead to a kernel lockup and DoS. Add check for 'req->mip_levels'. References: https://bugzilla.redhat.com/show_bug.cgi?id=1437431 Signed-off-by: Vladis Dronov <vdronov@redhat.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/vmwgfx: Handle vmalloc() failure in vmw_local_fifo_reserve()Dan Carpenter2017-06-141-0/+2
| | | | | | | | | | | | commit f0c62e9878024300319ba2438adc7b06c6b9c448 upstream. If vmalloc() fails then we need to a bit of cleanup before returning. Fixes: fb1d9738ca05 ("drm/vmwgfx: Add DRM driver for VMware Virtual GPU") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/msm: Expose our reservation object when exporting a dmabuf.Eric Anholt2017-06-143-0/+9
| | | | | | | | | | | | | | | | | | commit 43523eba79bda8f5b4c27f8ffe20ea078d20113a upstream. Without this, polling on the dma-buf (and presumably other devices synchronizing against our rendering) would return immediately, even while the BO was busy. Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Rob Clark <robdclark@gmail.com> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/amdgpu/ci: disable mclk switching for high refresh rates (v2)Alex Deucher2017-06-141-0/+6
| | | | | | | | | | | | | | | | commit 0a646f331db0eb9efc8d3a95a44872036d441d58 upstream. Even if the vblank period would allow it, it still seems to be problematic on some cards. v2: fix logic inversion (Nils) bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868 Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/gma500/psb: Actually use VBT mode when it is foundPatrik Jakobsson2017-06-071-7/+11
| | | | | | | | | | | | | | | commit 82bc9a42cf854fdf63155759c0aa790bd1f361b0 upstream. With LVDS we were incorrectly picking the pre-programmed mode instead of the prefered mode provided by VBT. Make sure we pick the VBT mode if one is provided. It is likely that the mode read-out code is still wrong but this patch fixes the immediate problem on most machines. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78562 Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170418114332.12183-1-patrik.r.jakobsson@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/radeon: Unbreak HPD handling for r600+Lyude2017-06-074-7/+7
| | | | | | | | | | | | | | | | | | commit 3d18e33735a02b1a90aecf14410bf3edbfd4d3dc upstream. We end up reading the interrupt register for HPD5, and then writing it to HPD6 which on systems without anything using HPD5 results in permanently disabling hotplug on one of the display outputs after the first time we acknowledge a hotplug interrupt from the GPU. This code is really bad. But for now, let's just fix this. I will hopefully have a large patch series to refactor all of this soon. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Lyude <lyude@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/radeon/ci: disable mclk switching for high refresh rates (v2)Alex Deucher2017-06-071-0/+6
| | | | | | | | | | | | | | | | commit 58d7e3e427db1bd68f33025519a9468140280a75 upstream. Even if the vblank period would allow it, it still seems to be problematic on some cards. v2: fix logic inversion (Nils) bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868 Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/edid: Add 10 bpc quirk for LGD 764 panel in HP zBook 17 G2Mario Kleiner2017-05-251-0/+8
| | | | | | | | | | | | | | | | | | commit e345da82bd6bdfa8492f80b3ce4370acfd868d95 upstream. The builtin eDP panel in the HP zBook 17 G2 supports 10 bpc, as advertised by the Laptops product specs and verified via injecting a fixed edid + photometer measurements, but edid reports unknown depth, so drivers fall back to 6 bpc. Add a quirk to get the full 10 bpc. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1492787108-23959-1-git-send-email-mario.kleiner.de@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/nouveau/tmr: handle races with hw when updating the next alarm timeBen Skeggs2017-05-251-10/+16
| | | | | | | | | | | | | commit 1b0f84380b10ee97f7d2dd191294de9017e94d1d upstream. If the time to the next alarm is short enough, we could race with HW and end up with an ~4 second delay until it triggers. Fix this by checking again after we update HW. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/nouveau/tmr: avoid processing completed alarms when adding a new oneBen Skeggs2017-05-251-3/+13
| | | | | | | | | | | | | | commit 330bdf62fe6a6c5b99a647f7bf7157107c9348b3 upstream. The idea here was to avoid having to "manually" program the HW if there's a new earliest alarm. This was lazy and bad, as it leads to loads of fun races between inter-related callers (ie. therm). Turns out, it's not so difficult after all. Go figure ;) Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/nouveau/tmr: fix corruption of the pending list when rescheduling an alarmBen Skeggs2017-05-251-7/+10
| | | | | | | | | | | | | | commit 9fc64667ee48c9a25e7dca1a6bcb6906fec5bcc5 upstream. At least therm/fantog "attempts" to work around this issue, which could lead to corruption of the pending alarm list. Fix it properly by not updating the timestamp without the lock held, or trying to add an already pending alarm to the pending alarm list.... Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/nouveau/tmr: ack interrupt before processing alarmsBen Skeggs2017-05-251-1/+1
| | | | | | | | | | | commit 3733bd8b407211739e72d051e5f30ad82a52c4bc upstream. Fixes a race where we can miss an alarm that triggers while we're already processing previous alarms. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/nouveau/therm: remove ineffective workarounds for alarm bugsBen Skeggs2017-05-254-4/+4
| | | | | | | | | | | commit e4311ee51d1e2676001b2d8fcefd92bdd79aad85 upstream. These were ineffective due to touching the list without the alarm lock, but should no longer be required. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/amdgpu: Make display watermark calculations more accurateMario Kleiner2017-05-253-15/+15
| | | | | | | | | | | | | | | | | commit d63c277dc672e0c568481af043359420fa9d4736 upstream. Avoid big roundoff errors in scanline/hactive durations for high pixel clocks, especially for >= 500 Mhz, and thereby program more accurate display fifo watermarks. Implemented here for DCE 6,8,10,11. Successfully tested on DCE 10 with AMD R9 380 Tonga. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/amdgpu: Avoid overflows/divide-by-zero in latency_watermark calculations.Mario Kleiner2017-05-253-48/+9
| | | | | | | | | | | | | | | | | | | | | | | commit e190ed1ea7458e446230de4113cc5d53b8dc4ec8 upstream. At dot clocks > approx. 250 Mhz, some of these calcs will overflow and cause miscalculation of latency watermarks, and for some overflows also divide-by-zero driver crash ("divide error: 0000 [#1] PREEMPT SMP" in "dce_v10_0_latency_watermark+0x12d/0x190"). This zero-divide happened, e.g., on AMD Tonga Pro under DCE-10, on a Displayport panel when trying to set a video mode of 2560x1440 at 165 Hz vrefresh with a dot clock of 635.540 Mhz. Refine calculations to avoid the overflows. Tested for DCE-10 with R9 380 Tonga + ASUS ROG PG279 panel. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/ttm: fix use-after-free races in vm fault handlingNicolai Hähnle2017-05-141-0/+12
| | | | | | | | | | | | | | | | | | | commit 3089c1df10e2931b1d72d2ffa7d86431084c86b3 upstream. The vm fault handler relies on the fact that the VMA owns a reference to the BO. However, once mmap_sem is released, other tasks are free to destroy the VMA, which can lead to the BO being freed. Fix two code paths where that can happen, both related to vm fault retries. Found via a lock debugging warning which flagged &bo->wu_mutex as locked while being destroyed. Fixes: cbe12e74ee4e ("drm/ttm: Allow vm fault retries") Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/amdgpu: fix array out of boundstom will2017-05-021-1/+1
| | | | | | | | | | | | | | | | commit 484f689fc9d4eb91c68f53e97dc355b1b06c3edb upstream. When the initial value of i is greater than zero, it may cause endless loop, resulting in array out of bounds, fix it. This is a port of the radeon fix to amdgpu. Signed-off-by: tom will <os@iscas.ac.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/nouveau/mmu/nv4a: use nv04 mmu rather than the nv44 oneIlia Mirkin2017-04-211-1/+1
| | | | | | | | | | | | | | | | | | | | | commit f94773b9f5ecd1df7c88c2e921924dd41d2020cc upstream. The NV4A (aka NV44A) is an oddity in the family. It only comes in AGP and PCI varieties, rather than a core PCIE chip with a bridge for AGP/PCI as necessary. As a result, it appears that the MMU is also non-functional. For AGP cards, the vast majority of the NV4A lineup, this worked out since we force AGP cards to use the nv04 mmu. However for PCI variants, this did not work. Switching to the NV04 MMU makes it work like a charm. Thanks to mwk for the suggestion. This should be a no-op for NV4A AGP boards, as they were using it already. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70388 Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/nouveau/mpeg: mthd returns true on success nowIlia Mirkin2017-04-212-2/+2
| | | | | | | | | | commit 83bce9c2baa51e439480a713119a73d3c8b61083 upstream. Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Fixes: 590801c1a3 ("drm/nouveau/mpeg: remove dependence on namedb/engctx lookup") Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/i915: Stop using RP_DOWN_EI on BaytrailChris Wilson2017-04-183-48/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit 8f68d591d4765b2e1ce9d916ac7bc5583285c4ad upstream. On Baytrail, we manually calculate busyness over the evaluation interval to avoid issues with miscaluations with RC6 enabled. However, it turns out that the DOWN_EI interrupt generator is completely bust - it operates in two modes, continuous or never. Neither of which are conducive to good behaviour. Stop unmask the DOWN_EI interrupt and just compute everything from the UP_EI which does seem to correspond to the desired interval. v2: Fixup gen6_rps_pm_mask() as well v3: Inline vlv_c0_above() to combine the now identical elapsed calculation for up/down and simplify the threshold testing Fixes: 43cf3bf084ba ("drm/i915: Improved w/a for rps on Baytrail") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170309211232.28878-1-chris@chris-wilson.co.uk Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170313170617.31564-1-chris@chris-wilson.co.uk (cherry picked from commit e0e8c7cb6eb68e9256de2d8cbeb481d3701c05ac) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/i915: Avoid tweaking evaluation thresholds on Baytrail v3Mika Kuoppala2017-04-181-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 34dc8993eef63681b062871413a9484008a2a78f upstream. Certain Baytrails, namely the 4 cpu core variants, have been plaqued by spurious system hangs, mostly occurring with light loads. Multiple bisects by various people point to a commit which changes the reclocking strategy for Baytrail to follow its bigger brethen: commit 8fb55197e64d ("drm/i915: Agressive downclocking on Baytrail") There is also a review comment attached to this commit from Deepak S on avoiding punit access on Cherryview and thus it was excluded on common reclocking path. By taking the same approach and omitting the punit access by not tweaking the thresholds when the hardware has been asked to move into different frequency, considerable gains in stability have been observed. With J1900 box, light render/video load would end up in system hang in usually less than 12 hours. With this patch applied, the cumulative uptime has now been 34 days without issues. To provoke system hang, light loads on both render and bsd engines in parallel have been used: glxgears >/dev/null 2>/dev/null & mpv --vo=vaapi --hwdec=vaapi --loop=inf vid.mp4 So far, author has not witnessed system hang with above load and this patch applied. Reports from the tenacious people at kernel bugzilla are also promising. Considering that the punit access frequency with this patch is considerably less, there is a possibility that this will push the, still unknown, root cause past the triggering point on most loads. But as we now can reliably reproduce the hang independently, we can reduce the pain that users are having and use a static thresholds until a root cause is found. v3: don't break debugfs and simplification (Chris Wilson) References: https://bugzilla.kernel.org/show_bug.cgi?id=109051 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Len Brown <len.brown@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@intel.com> Cc: fritsch@xbmc.org Cc: miku@iki.fi Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> CC: Michal Feix <michal@feix.cz> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Deepak S <deepak.s@linux.intel.com> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1487166779-26945-1-git-send-email-mika.kuoppala@intel.com (cherry picked from commit 6067a27d1f0184596d51decbac1c1fdc4acb012f) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/vmwgfx: fix integer overflow in vmw_surface_define_ioctl()Li Qiang2017-04-121-1/+4
| | | | | | | | | | | | | | | | commit e7e11f99564222d82f0ce84bd521e57d78a6b678 upstream. In vmw_surface_define_ioctl(), the 'num_sizes' is the sum of the 'req->mip_levels' array. This array can be assigned any value from the user space. As both the 'num_sizes' and the array is uint32_t, it is easy to make 'num_sizes' overflow. The later 'mip_levels' is used as the loop count. This can lead an oob write. Add the check of 'req->mip_levels' to avoid this. Signed-off-by: Li Qiang <liqiang6-s@360.cn> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/vmwgfx: Remove getparam error messageThomas Hellstrom2017-04-121-2/+0
| | | | | | | | | | | | | | commit 53e16798b0864464c5444a204e1bb93ae246c429 upstream. The mesa winsys sometimes uses unimplemented parameter requests to check for features. Remove the error message to avoid bloating the kernel log. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/ttm, drm/vmwgfx: Relax permission checking when opening surfacesThomas Hellstrom2017-04-124-22/+20
| | | | | | | | | | | | | | | | | commit fe25deb7737ce6c0879ccf79c99fa1221d428bf2 upstream. Previously, when a surface was opened using a legacy (non prime) handle, it was verified to have been created by a client in the same master realm. Relax this so that opening is also allowed recursively if the client already has the surface open. This works around a regression in svga mesa where opening of a shared surface is used recursively to obtain surface information. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/vmwgfx: avoid calling vzalloc with a 0 size in vmw_get_cap_3d_ioctl()Murray McAllister2017-04-121-1/+1
| | | | | | | | | | | | | | | commit 63774069d9527a1aeaa4aa20e929ef5e8e9ecc38 upstream. In vmw_get_cap_3d_ioctl(), a user can supply 0 for a size that is used in vzalloc(). This eventually calls dump_stack() (in warn_alloc()), which can leak useful addresses to dmesg. Add check to avoid a size of 0. Signed-off-by: Murray McAllister <murray.mcallister@insomniasec.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/vmwgfx: NULL pointer dereference in vmw_surface_define_ioctl()Murray McAllister2017-04-121-2/+2
| | | | | | | | | | | | | | | commit 36274ab8c596f1240c606bb514da329add2a1bcd upstream. Before memory allocations vmw_surface_define_ioctl() checks the upper-bounds of a user-supplied size, but does not check if the supplied size is 0. Add check to avoid NULL pointer dereferences. Signed-off-by: Murray McAllister <murray.mcallister@insomniasec.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/vmwgfx: Type-check lookups of fence objectsThomas Hellstrom2017-04-121-27/+50
| | | | | | | | | | | | | | | commit f7652afa8eadb416b23eb57dec6f158529942041 upstream. A malicious caller could otherwise hand over handles to other objects causing all sorts of interesting problems. Testing done: Ran a Fedora 25 desktop using both Xorg and gnome-shell/Wayland. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/radeon: Override fpfn for all VRAM placements in radeon_evict_flagsMichel Dänzer2017-04-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | commit ce4b4f228e51219b0b79588caf73225b08b5b779 upstream. We were accidentally only overriding the first VRAM placement. For BOs with the RADEON_GEM_NO_CPU_ACCESS flag set, radeon_ttm_placement_from_domain creates a second VRAM placment with fpfn == 0. If VRAM is almost full, the first VRAM placement with fpfn > 0 may not work, but the second one with fpfn == 0 always will (the BO's current location trivially satisfies it). Because "moving" the BO to its current location puts it back on the LRU list, this results in an infinite loop. Fixes: 2a85aedd117c ("drm/radeon: Try evicting from CPU accessible to inaccessible VRAM first") Reported-by: Zachary Michaels <zmichaels@oblong.com> Reported-and-Tested-by: Julien Isorce <jisorce@oblong.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/amdgpu: add missing irq.h includeDave Airlie2017-03-261-0/+1
| | | | | | | | | | | commit e9c5e7402dad6f4f04c2430db6f283512bcd4392 upstream. this fixes the build on arm. Signed-off-by: Dave Airlie <airlied@redhat.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/i915/dsi: Do not clear DPOUNIT_CLOCK_GATE_DISABLE from ↵Hans de Goede2017-03-151-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | vlv_init_display_clock_gating commit bb98e72adaf9d19719aba35f802d4836f5d5176c upstream. On my Cherrytrail CUBE iwork8 Air tablet PIPE-A would get stuck on loading i915 at boot 1 out of every 3 boots, resulting in a non functional LCD. Once the i915 driver has successfully loaded, the panel can be disabled / enabled without hitting this issue. The getting stuck is caused by vlv_init_display_clock_gating() clearing the DPOUNIT_CLOCK_GATE_DISABLE bit in DSPCLK_GATE_D when called from chv_pipe_power_well_ops.enable() on driver load, while a pipe is enabled driving the DSI LCD by the BIOS. Clearing this bit while DSI is in use is a known issue and intel_dsi_pre_enable() / intel_dsi_post_disable() already set / clear it as appropriate. This commit modifies vlv_init_display_clock_gating() to leave the DPOUNIT_CLOCK_GATE_DISABLE bit alone fixing the pipe getting stuck. Changes in v2: -Replace PIPE-A with "a pipe" or "the pipe" in the commit msg and comment Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97330 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161202142904.25613-1-hdegoede@redhat.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit 721d484563e1a51ada760089c490cbc47e909756) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: River Zhou <riverzhou2000@163.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/atomic: fix an error code in mode_fixup()Dan Carpenter2017-03-151-1/+1
| | | | | | | | | | | | | | | | | | | commit f9ad86e42d0303eeb8e0d41bb208153022ebd9d2 upstream. Having "ret" be a bool type works for everything except ret = funcs->atomic_check(). The other functions all return zero on error but ->atomic_check() returns negative error codes. We want to propagate the error code but instead we return 1. I found this bug with static analysis and I don't know if it affects run time. Fixes: 4cd4df8080a3 ("drm/atomic: Add ->atomic_check() to encoder helpers") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170207234601.GA23981@mwanda Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/ttm: Make sure BOs being swapped out are cacheableMichel Dänzer2017-03-151-2/+2
| | | | | | | | | | | | | | | | | | | | commit 239ac65fa5ffab71adf66e642750f940e7241d99 upstream. The current caching state may not be tt_cached, even though the placement contains TTM_PL_FLAG_CACHED, because placement can contain multiple caching flags. Trying to swap out such a BO would trip up the BUG_ON(ttm->caching_state != tt_cached); in ttm_tt_swapout. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Christian König <christian.koenig@amd.com>. Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/edid: Add EDID_QUIRK_FORCE_8BPC quirk for Rotel RSX-1058Tomeu Vizoso2017-03-151-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 36fc579761b50784b63dafd0f2e796b659e0f5ee upstream. Rotel RSX-1058 is a receiver with 4 HDMI inputs and a HDMI output, all 1.1. When a sink that supports deep color is connected to the output, the receiver will send EDIDs that advertise this capability, even if it isn't possible with HDMI versions earlier than 1.3. Currently the kernel is assuming that deep color is possible and the sink displays an error. This quirk will make sure that deep color isn't used with this particular receiver. Fixes: 7a0baa623446 ("Revert "drm/i915: Disable 12bpc hdmi for now"") Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170220152545.13153-1-tomeu.vizoso@collabora.com Cc: Matt Horan <matt@matthoran.com> Tested-by: Matt Horan <matt@matthoran.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99869 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/ast: Fix AST2400 POST failure without BMC FW or VBIOSY.C. Chen2017-03-151-3/+35
| | | | | | | | | | | | | | | | commit 3856081eede297b617560b85e948cfb00bb395ec upstream. The current POST code for the AST2300/2400 family doesn't work properly if the chip hasn't been initialized previously by either the BMC own FW or the VBIOS. This fixes it. Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Y.C. Chen <yc_chen@aspeedtech.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/ast: Call open_key before enable_mmio in POST codeY.C. Chen2017-03-151-1/+1
| | | | | | | | | | | | | | commit 9bb92f51558f2ef5f56c257bdcea0588f31d857e upstream. open_key enables access the registers used by enable_mmio Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Joel Stanley <joel@jms.id.au> Tested-by: Y.C. Chen <yc_chen@aspeedtech.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OpenPOWER on IntegriCloud