summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/panel
Commit message (Collapse)AuthorAgeFilesLines
...
* drm/panel: simple: Add support for Innolux G070Y2-L01Christoph Fritz2018-07-101-2/+35
| | | | | | | | | | This patch adds support for Innolux G070Y2-L01 7" WVGA (800x480) TFT LCD panel. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1528111008.2818.20.camel@googlemail.com
* drm/panel: simple: Add newhaven, nhd-4.3-480272ef-atxl LCDTomi Valkeinen2018-07-101-0/+30
| | | | | | | | | Add support for newhaven,nhd-4.3-480272ef-atxl to panel-simple. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180618132242.8673-8-tomi.valkeinen@ti.com
* drm/panel: simple: Add support for BOE HV070WSA-100 panel to simple-panelAndrzej Hajda2018-07-101-0/+25
| | | | | | | | | | The patch adds support for BOE HV070WSA-100 WSVGA 7.01 inch panel to the panel-simple driver. The panel is used in Exynos5250-arndale boards. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1529396370-18761-6-git-send-email-m.purski@samsung.com
* drm/panel: simple: Add DLC DLC0700YZG-1 panelPhilipp Zabel2018-07-101-0/+32
| | | | | | | | | | | | | This patch adds support for DLC DLC0700YZG-1 1024x600 LVDS panels to the simple-panel driver. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> [m.felsch@pengutronix.de: fix typo in compatible dt-binding] [m.felsch@pengutronix.de: add property bindings] Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180523092504.5142-3-m.felsch@pengutronix.de
* drm/panel: Add support for the EDT ETM0700G0EDH6Jan Tuerk2018-07-101-0/+3
| | | | | | | | | | | | | | The Emerging Display Technology ETM0700G0EDH6 is the uses the same panel as the ETM0700G0BDH6. It differs in the hardware design for the backlight and the touchscreen i2c interface. As the new display type has different requirements for drive-strengths on the i2c-bus, add an additional compatible to allow the handling of it or warn about incompatible cpu and display combinations. Signed-off-by: Jan Tuerk <jan.tuerk@emtrion.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180619095546.24445-3-jan.tuerk@emtrion.com
* drm/panel: Add support for the EDT ETM0700G0BDH6Jan Tuerk2018-07-101-0/+15
| | | | | | | | | | | The Emerging Display Technology ETM0700G0BDH6 is exactly the same display as the ETM0700G0DH6, exept the pixelclock polarity. Therefore re-use the ETM0700G0DH6 modes. It is used by default on emtrion Avari based development kits. Signed-off-by: Jan Tuerk <jan.tuerk@emtrion.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180619095546.24445-2-jan.tuerk@emtrion.com
* drm/panel: simple: Add support for Rocktech RK070ER9427 LCD panelJagan Teki2018-07-101-0/+33
| | | | | | | | | | | This adds support for the Rocktech Display Ltd. RK070ER9427 800(RGB)x480 TFT LCD panel, which can be supported by the simple panel driver. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180607134648.2902-1-jagan@amarulasolutions.com
* drm/panel: Add Ilitek ILI9881c panel driverMaxime Ripard2018-06-253-0/+513
| | | | | | | | | | | The LHR050H41 panel is the panel shipped with the BananaPi M2-Magic, and is based on the Ilitek ILI9881c Controller. Add a driver for it, modelled after the other Ilitek controller drivers. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/acb5453112ab7c7b801cf4f1669e351b391e77e8.1527587352.git-series.maxime.ripard@bootlin.com
* display: panel: Add AUO g070vvn01 display support (800x480)Lukasz Majewski2018-05-291-0/+31
| | | | | | | | | This commit adds support for AUO's 7.0" display. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180514190849.18723-1-lukma@denx.de
* drm/panel: simple: Fix data type in KEO TX31D200VM0BAA timingsStefan Agner2018-05-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | All values in a struct struct timing_entry (every entry in struct display_timing) require an integer. Choose the closest safe integer of 32. This avoids a warning seen with clang: drivers/gpu/drm/panel/panel-simple.c:1250:27: warning: implicit conversion from 'double' to 'u32' (aka 'unsigned int') changes value from 33.5 to 33 [-Wliteral-conversion] .vfront_porch = { 6, 21, 33.5 }, ~ ^~~~ drivers/gpu/drm/panel/panel-simple.c:1251:26: warning: implicit conversion from 'double' to 'u32' (aka 'unsigned int') changes value from 33.5 to 33 [-Wliteral-conversion] .vback_porch = { 6, 21, 33.5 }, ~ ^~~~ Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180419212003.8155-1-stefan@agner.ch
* drm/panel: simple: AUO P320HVN03 uses SPWG data orderingLucas Stach2018-05-181-1/+1
| | | | | | | | | | | The patch adding support for the AUO P320HVN03 panel was written against a preliminary datasheet, which specified JEIDA data ordering. Testing with real hardware has shown that the actually used data ordering is SPWG. Fixes: 70c0d5b783f5 (drm/panel: simple: add support for AUO P320HVN03) Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180411152741.22483-1-l.stach@pengutronix.de
* drm/panel: simple: Add Innolux TV123WAM panel driver supportspanda@codeaurora.org2018-05-181-0/+27
| | | | | | | | | | | | | Add support for Innolux TV123WAM, which is a 12.3" eDP display panel with 2160x1440 resolution. Changes in v1: - Add the compatibility string, display_mode and panel_desc structures in alphabetical order (Sean Paul). Signed-off-by: Sandeep Panda <spanda@codeaurora.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1526363564-13823-4-git-send-email-spanda@codeaurora.org
* drm/panel: otm8009a: Use new backlight APIPhilippe CORNU2018-05-181-17/+9
| | | | | | | | | | The backlight API provides new functions to enable and disable the backlight and which hide the intricacies of achieving the correct result. Signed-off-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423141054.13128-5-philippe.cornu@st.com
* drm/panel: otm8009a: No message if probe successPhilippe CORNU2018-05-181-9/+2
| | | | | | | | | | Remove the message in case of probe success. This comes from a suggestion followed in the recent integration of the raydium rm68200 panel. Signed-off-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423141054.13128-4-philippe.cornu@st.com
* drm/panel: otm8009a: Fix glitches by moving backlight enable to ↵Philippe CORNU2018-05-181-7/+10
| | | | | | | | | | | | | | | otm8009a_enable() The backlight 1st update was in the otm8009a_prepare() function for a bad reason: backlight was not working in video mode and the otm8009a_prepare() is in command mode for the init sequence. As the backlight is now fixed (no low-power mode), it is good to put it back in the otm8009a_enable() function, avoiding also image glitches visible on some "slow" devices. Signed-off-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423141054.13128-3-philippe.cornu@st.com
* drm/panel: otm8009a: Fix backlight updatesPhilippe CORNU2018-05-181-2/+16
| | | | | | | | | | | | | | | Backlight updates was not working anymore since the good implementation of the DSI low-power mode in the DSI host driver. After a longer analysis, the backlight updates in DSI video mode require the DSI high- speed mode. Note: it is important to keep the DSI low-power mode for the rest of the driver as init sequence, sleep in/out... DSI commands work in low-power mode. Signed-off-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423141054.13128-2-philippe.cornu@st.com
* drm/panel: Remove drm_panel_detach() calls from all panel driversJyri Sarha2018-05-189-9/+0
| | | | | | | | | | | | | | | | | | Remove all drm_panel_detach() calls from all panel drivers and update the kerneldoc for drm_panel_detach(). Setting the connector and drm to NULL when the DRM panel device is going away hardly serves any purpose. Usually the whole memory structure is freed right after the remove call. However, calling the detach function from the master DRM device, and setting the connector pointer to NULL, has the logic of marking the panel again as available for another DRM master to attach. The usual situation would be the same DRM master device binding again. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/464b8d330d6b4c94cfb5aad2ca9ea7eb2c52d934.1524727888.git.jsarha@ti.com
* drm/panel: Enable DSI transactions on the RPi panel.Eric Anholt2018-04-301-13/+1
| | | | | | | | | | | | | | It turns out that I had just mistaken what type of write the register writes were supposed to be, using DCS instead of generic long writes. Switching to transactions instead of using the atmel as a bridge also seems to resolve the sparkling pixels problem I've had. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.") Link: https://patchwork.freedesktop.org/patch/msgid/20171031193258.17373-2-eric@anholt.net Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Thierry Reding <treding@nvidia.com>
* drm/panel: rm68200: Add backlight dependencyArnd Bergmann2018-03-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Like many other panel drivers, this one fails to build when backlight support is disabled: drivers/gpu/drm/panel/panel-raydium-rm68200.o: In function `rm68200_probe': panel-raydium-rm68200.c:(.text+0x14a): undefined reference to `devm_of_find_backlight' This adds the appropriate dependency. Note that while include/linux/backlight.h provides a stub inline when backlight support is not enabled, this isn't enough to deal with the case where backlight support is built as a module but the panel driver is built-in, in which case linking will still fail as above. One way to avoid this is to add a dependency such as this: depends on BACKLIGHT_CLASS_DEVICE || BACKLIGHT_CLASS_DEVICE=n but that is rather complex and misses the point that the panel support is mostly useless without backlight support. Fixes: 2b7ed18bed1a ("drm/panel: Add support for Raydium RM68200 panel driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> [treding@nvidia.com: clarify the need for the dependency] Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180313210015.3344380-1-arnd@arndb.de
* drm/panel: Add support for AUO G104SN02 V2 panelChristoph Fritz2018-03-121-0/+26
| | | | | | | | | | | This patch adds support for AUO G104SN02 V2 800x600 10.4" panel to DRM simple panel driver. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1513430016.1930.4.camel@googlemail.com
* drm/panel: ili9322: Make local symbols staticWei Yongjun2018-03-121-2/+2
| | | | | | | | | | | | | | | | Fixes the following sparse warnings: drivers/gpu/drm/panel/panel-ilitek-ili9322.c:182:12: warning: symbol 'ili9322_inputs' was not declared. Should it be static? drivers/gpu/drm/panel/panel-ilitek-ili9322.c:343:28: warning: symbol 'ili9322_regmap_config' was not declared. Should it be static? Also change ili9322_inputs to 'const char * const' to avoid chackpatch warning. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1514948938-19996-1-git-send-email-weiyongjun1@huawei.com
* drm/panel: otm8009a: Adopt SPDX identifiersPhilippe CORNU2018-03-121-2/+2
| | | | | | | | Add SPDX identifiers to OriseTech OTM8009a panel driver. Signed-off-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180119110516.4916-1-philippe.cornu@st.com
* drm/panel: lvds: Fix driver description headingBaruch Siach2018-03-121-1/+1
| | | | | | | | Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/f80a5dd350b057d925d36f5857b5724c88da50df.1516636902.git.baruch@tkos.co.il
* drm/panel: simple: Add support for KEO TX31D200VM0BAAJagan Teki2018-03-121-0/+27
| | | | | | | | | | | This adds support for the Kaohsiung Opto-Electronics., TX31D200VM0BAA 12.3" HSXGA LVDS panel, which can be supported by the simple panel driver. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1517766571-409-5-git-send-email-jagan@amarulasolutions.com
* drm/panel: otm8009a: Add support for the optional power-supplyPhilippe CORNU2018-03-121-0/+17
| | | | | | | | | | | | | Add support for the optional power-supply. Note: A "dummy regulator" is returned by devm_regulator_get() if the optional regulator is not present in the device tree, simplifying the source code when enabling/disabling the regulator. Signed-off-by: Philippe Cornu <philippe.cornu@st.com> Reviewed-by: Yannick Fertré <yannick.fertre@st.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180205094532.23547-3-philippe.cornu@st.com
* drm/panel: simple: Use display_timing for lq123p1jx31Sean Paul2018-03-121-14/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert the sharp lq123p1jx31 from using a fixed mode to specifying a display timing with min/typ/max values. This allows us to capture the timings set forth in the datasheet as well as the additional values that we've cleared with the display vendor to avoid interference with the digitizer on the Samsung Chromebook Plus (kevin). A follow-on patch will specify the override mode for kevin devices. Changes in v2: - None Changes in v3: - None Cc: Doug Anderson <dianders@chromium.org> Cc: Eric Anholt <eric@anholt.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Stéphane Marchesin <marcheu@chromium.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: devicetree@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-rockchip@lists.infradead.org Signed-off-by: Sean Paul <seanpaul@chromium.org> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180208174855.55620-6-seanpaul@chromium.org
* drm/panel: Add support for Raydium RM68200 panel driverPhilippe CORNU2018-03-123-0/+457
| | | | | | | | | This patch adds Raydium Semiconductor Corporation RM68200 5.5" 720x1280 TFT LCD panel driver (MIPI-DSI video mode). Signed-off-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180302153222.4377-3-philippe.cornu@st.com
* drm/panel: simple: Fix the bus format for the Ontat panelEric Anholt2018-03-121-1/+1
| | | | | | | | | | | | | This fixes bad color output. When I was first testing the device I had the DPI hardware set to 666 mode, but apparently in the refactor to use the bus_format information from the panel driver, I failed to actually update the panel. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: e8b6f561b2ee ("drm/panel: simple: Add the 7" DPI panel from Adafruit") Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180309233332.1769-1-eric@anholt.net
* drm/panel: Fix ARM Versatile panel clocksLinus Walleij2018-02-231-4/+4
| | | | | | | | | | These clocks are in kHz not in Hz, oops. Fix it so my new bandwidth calculations patch starts working with these panels. Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180211103840.18764-1-linus.walleij@linaro.org
* drm/panel: Use of_find_backlight helperMeghana Madhyastha2018-02-203-66/+13
| | | | | | | | | | | | Replace of_find_backlight_by_node and of the code around it with of_find_backlight helper to avoid repetition of code. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Meghana Madhyastha <meghana.madhyastha@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/140d01afb138d687680b2d1776a4c101c9fa9a0a.1516810725.git.meghana.madhyastha@gmail.com
* drm/panel: Use backlight_enable/disable helpersMeghana Madhyastha2018-02-204-24/+8
| | | | | | | | | | | | | Use backlight_enable/disable helpers instead of changing the property and calling backlight_update_status for cleaner and simpler code and also to avoid repetitions. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Meghana Madhyastha <meghana.madhyastha@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/bc80cdb5cf1a6638dce9fb9f8da674e361e3b749.1516810725.git.meghana.madhyastha@gmail.com
* Merge tag 'drm-misc-next-2018-02-13' of ↵Dave Airlie2018-02-164-11/+393
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 4.17: UAPI Changes: - drm/vc4: Expose performance counters to userspace (Boris) Cross-subsystem Changes: - MAINTAINERS: Linus to maintain panel-arm-versatile in -misc (Linus) Core Changes: - Only use swiotlb when necessary (Chunming) Driver Changes: - drm/panel: Add support for ARM Versatile panels (Linus) - pl111: Improvements around versatile panel support (Linus) ---------------------------------------- Tagged on 2018-02-06: drm-misc-next for 4.17: UAPI Changes: - Validate mode flags + type (Ville) - Deprecate unused mode flags PIXMUX, BCAST (Ville) - Deprecate unused mode types BUILTIN, CRTC_C, CLOCK_C, DEFAULT (Ville) Cross-subsystem Changes: - MAINTAINERS: s/Daniel/Maarten/ for drm-misc (Daniel) Core Changes: - gem: Export gem functions for drivers to use (Samuel) - bridge: Introduce bridge timings in drm_bridge (Linus) - dma-buf: Allow exclusive fence to be bundled in fence array when calling reservation_object_get_fences_rcu (Christian) - dp: Add training pattern 4 and HBR3 support to dp helpers (Manasi) - fourcc: Add alpha bit to formats to avoid driver format LUTs (Maxime) - mode: Various cleanups + add new device-wide .mode_valid hook (Ville) - atomic: Fix state leak when non-blocking commits fail (Leo) NOTE: IIRC, this was cross-picked to -fixes so it might fall out - crc: Allow polling on the data fd (Maarten) Driver Changes: - bridge/vga-dac: Add THS8134* support (Linus) - tinydrm: Various MIPI DBI improvements/cleanups (Noralf) - bridge/dw-mipi-dsi: Cleanups + use create_packet helper (Brian) - drm/sun4i: Add Display Engine frontend support (Maxime) - drm/sun4i: Add zpos support + increase num planes from 2 to 4 (Maxime) - various: Use drm_mode_get_hv_timing() to fill plane clip rectangle (Ville) - stm: Add 8-bit clut support, add dsi phy v1.31 support, +fixes (Phillipe) Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Chunming Zhou <david1.zhou@amd.com> Cc: Samuel Li <Samuel.Li@amd.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Brian Norris <briannorris@chromium.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Christian König <christian.koenig@amd.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Leo (Sunpeng) Li <sunpeng.li@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> * tag 'drm-misc-next-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc: (115 commits) drm/radeon: only enable swiotlb path when need v2 drm/amdgpu: only enable swiotlb alloc when need v2 drm: add func to get max iomem address v2 drm/vc4: Expose performance counters to userspace drm: Print the pid when debug logging an ioctl error. drm/stm: ltdc: remove non-alpha color formats on layer 2 for older hw drm/stm: ltdc: add non-alpha color formats drm/bridge/synopsys: dsi: Add 1.31 version support drm/bridge/synopsys: dsi: Add read feature drm/pl111: Support multiple endpoints on the CLCD drm/pl111: Support variants with broken VBLANK drm/pl111: Support variants with broken clock divider drm/pl111: Handle the Versatile RGB/BGR565 mode drm/pl111: Properly detect the ARM PL110 variants drm/panel: Add support for ARM Versatile panels drm/panel: Device tree bindings for ARM Versatile panels drm/bridge: Rename argument from crtc to bridge drm/crc: Add support for polling on the data fd. drm/sun4i: Use drm_mode_get_hv_timing() to populate plane clip rectangle drm/rcar-du: Use drm_mode_get_hv_timing() to populate plane clip rectangle ...
| * drm/panel: Add support for ARM Versatile panelsLinus Walleij2018-02-073-0/+388
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ARM reference designs "Versatile AB" and "Versatile PB" contain panel connectors with autodetection of the connected panel type. This adds a small driver utilizing the MFD syscon look-up to read the autodetection register and set up the corresponding panel appropriately. In the source file there is a bit of elaboration of the panel types and interfaces on these boards. This was tested with the PL111 DRM driver on the ARM Versatile AB with the IB2 daughterboard. Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180205192013.5349-2-linus.walleij@linaro.org
| * drm/panel: panasonic-vvx10f034n00: More return value fixesSean Paul2018-01-221-12/+5
| | | | | | | | | | | | | | | | | | | | A couple more return value fixes which Philippe brought up during our previous review. Suggested-by: Philippe CORNU <philippe.cornu@st.com> Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180117213751.54668-1-seanpaul@chromium.org
| * drm/panel: panasonic-vvx10f034n00: Fix wuxga_nt_panel_disable() return valueSean Paul2018-01-171-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | Return value for mipi_dsi_shutdown_peripheral() is unchecked. Check it and return any errors if they come up. Even if mipi_dsi_shutdown_peripheral() fails, continue attempting to disable. Cc: Philippe Cornu <philippe.cornu@st.com> Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180116222217.240939-1-seanpaul@chromium.org
* | drm/panel: lvds: Handle the optional regulator case properlyMaxime Ripard2018-01-151-2/+9
|/ | | | | | | | | | | | | | | The devm_regulator_get_optional function, unlike it was assumed in the commit a1c55bccf600 ("drm/panel: lvds: Add support for the power-supply property"), is actually returning an error pointer with -ENODEV instead of NULL when there's no regulator to find. Make sure we handle that case properly. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Fixes: a1c55bccf600 ("drm/panel: lvds: Add support for the power-supply property") Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180110155941.16109-1-maxime.ripard@free-electrons.com
* drm/panel: lvds: Add support for the power-supply propertyMaxime Ripard2018-01-051-0/+23
| | | | | | | | | | | A significant number of panels need to power up a regulator in order to operate properly. Add support for the power-supply property to enable and disable such a regulator whenever needed. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/0c0819bdf88fa948188df95e57a10820a8a4548d.1513854122.git-series.maxime.ripard@free-electrons.com
* drm/panel: Add Ilitek ILI9322 driverLinus Walleij2017-12-223-0/+971
| | | | | | | | | | | | | | | | | | This adds support for the Ilitek ILI9322 QVGA (320x240) TFT panel driver. This panel driver supports serial or parallel RGB or YUV input and also ITU-T BT.656 input streams. The controller is combined with a physical panel and configured through the device tree. Cc: David Lechner <david@lechnology.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171221234411.12156-1-linus.walleij@linaro.org
* Merge tag 'drm-misc-next-2017-11-30' of ↵Dave Airlie2017-12-042-1/+63
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm/drm-misc into drm-next Cross-subsystem Changes: - device tree doc for the Mitsubishi AA070MC01 and Tianma TM070RVHG71 panels (Lukasz Majewski) and for a 2nd endpoint on stm32 (Philippe Cornu) Core Changes: The most important changes are: - Add drm_driver .last_close and .output_poll_changed helpers to reduce fbdev emulation footprint in drivers (Noralf) - Fix plane clipping in core and for vmwgfx (Ville) Then we have a bunch of of improvement for print and debug such as the addition of a framebuffer debugfs file. ELD connector, HDMI and improvements. And a bunch of misc improvements, clean ups and style changes and doc updates [airlied: drop eld bits from amdgpu_dm] Driver Changes: - sii8620: filter unsupported modes and add DVI mode support (Maciej Purski) - rockchip: analogix_dp: Remove unnecessary init code (Jeffy Chen) - virtio, cirrus: add fb create_handle support to enable screenshots(Lepton Wu) - virtio: replace reference/unreference with get/put (Aastha Gupta) - vc4, gma500: Convert timers to use timer_setup() (Kees Cook) - vc4: Reject HDMI modes with too high of clocks (Eric) - vc4: Add support for more pixel formats (Dave Stevenson) - stm: dsi: Rename driver name to "stm32-display-dsi" (Philippe Cornu) - stm: ltdc: add a 2nd endpoint (Philippe Cornu) - via: use monotonic time for VIA_WAIT_IRQ (Arnd Bergmann) * tag 'drm-misc-next-2017-11-30' of git://anongit.freedesktop.org/drm/drm-misc: (96 commits) drm/bridge: tc358767: add copyright lines MAINTAINERS: change maintainer for Rockchip drm drivers drm/vblank: Fix vblank timestamp debugs drm/via: use monotonic time for VIA_WAIT_IRQ dma-buf: Fix ifnullfree.cocci warnings drm/printer: Add drm_vprintf() drm/edid: Allow HDMI infoframe without VIC or S3D video/hdmi: Allow "empty" HDMI infoframes dma-buf/fence: Fix lock inversion within dma-fence-array drm/sti: Handle return value of platform_get_irq_byname drm/vc4: Add support for NV21 and NV61. drm/vc4: Use .pixel_order instead of custom .flip_cbcr drm/vc4: Add support for DRM_FORMAT_RGB888 and DRM_FORMAT_BGR888 drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c drm: Check crtc_state->enable rather than crtc->enabled in drm_plane_helper_check_state() drm/vmwgfx: Try to fix plane clipping drm/vmwgfx: Use drm_plane_helper_check_state() drm/vmwgfx: Remove bogus crtc coords vs fb size check gpu: gma500: remove unneeded DRIVER_LICENSE #define drm: don't link DP aux i2c adapter to the hardware device node ...
| * drm/panel: simple: Add Mitsubishi AA070MC01 panel supportLukasz Majewski2017-11-171-0/+35
| | | | | | | | | | | | | | | | | | | | The Mitsubishi AA070MC01 is a 7.0" WVGA (800x480) TFT panel working in 8 bit ISP mode (pin 19 "mode" HIGH for 20 pin TFT connector). Signed-off-by: Lukasz Majewski <lukma@denx.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1508537917-1723-1-git-send-email-lukma@denx.de
| * drm/panel: simple: Add Tianma TM070RVHG71 panel supportLukasz Majewski2017-11-171-0/+27
| | | | | | | | | | | | | | | | | | | | The Tianma TM070RVHG71 is a 7" WVGA (800x480) TFT LCD panel connected via LVDS and can be supported by the simple-panel binding. Signed-off-by: Lukasz Majewski <lukma@denx.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171107153058.5554-1-lukma@denx.de
| * drm/panel: rpi-touchscreen: propagate errors in rpi_touchscreen_i2c_read()Dan Carpenter2017-10-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | There is one caller which checks whether rpi_touchscreen_i2c_read() returns negative error codes. Currently it can't because negative error codes are truncated to u8, but that's easy to fix if we change the type to int. Fixes: 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20171020002845.kar2wg7gqxg7tzqi@mwanda Reviewed-by: Eric Anholt <eric@anholt.net>
* | Merge tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds2017-11-157-9/+1988
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull drm updates from Dave Airlie: "This is the main drm pull request for v4.15. Core: - Atomic object lifetime fixes - Atomic iterator improvements - Sparse/smatch fixes - Legacy kms ioctls to be interruptible - EDID override improvements - fb/gem helper cleanups - Simple outreachy patches - Documentation improvements - Fix dma-buf rcu races - DRM mode object leasing for improving VR use cases. - vgaarb improvements for non-x86 platforms. New driver: - tve200: Faraday Technology TVE200 block. This "TV Encoder" encodes a ITU-T BT.656 stream and can be found in the StorLink SL3516 (later Cortina Systems CS3516) as well as the Grain Media GM8180. New bridges: - SiI9234 support New panels: - S6E63J0X03, OTM8009A, Seiko 43WVF1G, 7" rpi touch panel, Toshiba LT089AC19000, Innolux AT043TN24 i915: - Remove Coffeelake from alpha support - Cannonlake workarounds - Infoframe refactoring for DisplayPort - VBT updates - DisplayPort vswing/emph/buffer translation refactoring - CCS fixes - Restore GPU clock boost on missed vblanks - Scatter list updates for userptr allocations - Gen9+ transition watermarks - Display IPC (Isochronous Priority Control) - Private PAT management - GVT: improved error handling and pci config sanitizing - Execlist refactoring - Transparent Huge Page support - User defined priorities support - HuC/GuC firmware refactoring - DP MST fixes - eDP power sequencing fixes - Use RCU instead of stop_machine - PSR state tracking support - Eviction fixes - BDW DP aux channel timeout fixes - LSPCON fixes - Cannonlake PLL fixes amdgpu: - Per VM BO support - Powerplay cleanups - CI powerplay support - PASID mgr for kfd - SR-IOV fixes - initial GPU reset for vega10 - Prime mmap support - TTM updates - Clock query interface for Raven - Fence to handle ioctl - UVD encode ring support on Polaris - Transparent huge page DMA support - Compute LRU pipe tweaks - BO flag to allow buffers to opt out of implicit sync - CTX priority setting API - VRAM lost infrastructure plumbing qxl: - fix flicker since atomic rework amdkfd: - Further improvements from internal AMD tree - Usermode events - Drop radeon support nouveau: - Pascal temperature sensor support - Improved BAR2 handling - MMU rework to support Pascal MMU exynos: - Improved HDMI/mixer support - HDMI audio interface support tegra: - Prep work for tegra186 - Cleanup/fixes msm: - Preemption support for a5xx - Display fixes for 8x96 (snapdragon 820) - Async cursor plane fixes - FW loading rework - GPU debugging improvements vc4: - Prep for DSI panels - fix T-format tiling scanout - New madvise ioctl Rockchip: - LVDS support omapdrm: - omap4 HDMI CEC support etnaviv: - GPU performance counters groundwork sun4i: - refactor driver load + TCON backend - HDMI improvements - A31 support - Misc fixes udl: - Probe/EDID read fixes. tilcdc: - Misc fixes. pl111: - Support more variants adv7511: - Improve EDID handling. - HDMI CEC support sii8620: - Add remote control support" * tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux: (1480 commits) drm/rockchip: analogix_dp: Use mutex rather than spinlock drm/mode_object: fix documentation for object lookups. drm/i915: Reorder context-close to avoid calling i915_vma_close() under RCU drm/i915: Move init_clock_gating() back to where it was drm/i915: Prune the reservation shared fence array drm/i915: Idle the GPU before shinking everything drm/i915: Lock llist_del_first() vs llist_del_all() drm/i915: Calculate ironlake intermediate watermarks correctly, v2. drm/i915: Disable lazy PPGTT page table optimization for vGPU drm/i915/execlists: Remove the priority "optimisation" drm/i915: Filter out spurious execlists context-switch interrupts drm/amdgpu: use irq-safe lock for kiq->ring_lock drm/amdgpu: bypass lru touch for KIQ ring submission drm/amdgpu: Potential uninitialized variable in amdgpu_vm_update_directories() drm/amdgpu: potential uninitialized variable in amdgpu_vce_ring_parse_cs() drm/amd/powerplay: initialize a variable before using it drm/amd/powerplay: suppress KASAN out of bounds warning in vega10_populate_all_memory_levels drm/amd/amdgpu: fix evicted VRAM bo adjudgement condition drm/vblank: Tune drm_crtc_accurate_vblank_count() WARN down to a debug drm/rockchip: add CONFIG_OF dependency for lvds ...
| * drm/panel: simple: add Toshiba LT089AC19000Lucas Stach2017-10-191-0/+27
| | | | | | | | | | | | | | | | | | | | Only exposes a single mode and not a complete display timing, as the datasheet is rather vague about the minimum/maximum values. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171018172240.8772-1-l.stach@pengutronix.de
| * drm/panel: simple: add delays for Innolux AT043TN24Philipp Zabel2017-10-181-0/+4
| | | | | | | | | | | | | | | | | | | | The delays between video data and backlight enable and between backlight disable and end of video data are given as >= 160 ms in the datasheet. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Marco Franchi <marco.franchi@nxp.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171011125958.23064-3-p.zabel@pengutronix.de
| * drm/panel: simple: add bus flags for Innolux AT043TN24Philipp Zabel2017-10-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | For LCD interface controllers that support configuring polarity of pixel clock and data enable signal, specify bus flags in the panel descriptor. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Marco Franchi <marco.franchi@nxp.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171011125958.23064-2-p.zabel@pengutronix.de
| * drm/panel: simple: fix vertical timings for Innolux AT043TN24Philipp Zabel2017-10-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | The vsync length should be 10 lines, as specified in the data sheet. This gets the actual refresh rate closer to nominal 60 Hz given the 9 MHz pixel clock. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Marco Franchi <marco.franchi@nxp.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171011125958.23064-1-p.zabel@pengutronix.de
| * drm/panel: Add support for the Raspberry Pi 7" Touchscreen.Eric Anholt2017-10-063-0/+523
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver communicates with the Atmel microcontroller for sequencing the poweron of the TC358762 DSI-DPI bridge and controlling the backlight PWM. v2: Set the same default orientation as the closed source firmware used, which is the best for viewing angle. v3: Rewrite as an i2c client driver after bridge driver rejection. v4: Finish probe without the DSI host, using the new delayed registration, and attach to the host during mipi_dsi_driver probe. v5: Rework to drop the "probe without DSI host" mode again, now that vc4 will create the host early on. v6: Drop unused brightness #define (noticed by Thierry) Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20170927193654.12609-4-eric@anholt.net Reviewed-by: Archit Taneja <architt@codeaurora.org> Acked-by: Thierry Reding <treding@nvidia.com>
| * drm/panel: Add driver for Seiko 43WVF1G panelMarco Franchi2017-08-183-0/+382
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add driver for Seiko Instruments Inc. 4.3" WVGA (800 x RGB x 480) TFT with Touch-Panel. Datasheet available at: http://www.glyn.de/data/glyn/media/doc/43wvf1g-0.pdf Seiko 43WVF1G panel has two power supplies: avdd and dvdd and they require a specific power on/down sequence. For this reason the simple panel driver cannot be used to drive this panel, so create a new one heavily based on simple panel. Based on initial patch submission from Breno Lima. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1500567179-6967-1-git-send-email-marco.franchi@nxp.com
| * drm/panel: simple: Remove unneeded gpiod NULL checkFabio Estevam2017-08-181-4/+2
| | | | | | | | | | | | | | | | | | The gpiod API checks for NULL descriptors, so there is no need to duplicate the check in the driver. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1500249939-8075-1-git-send-email-festevam@gmail.com
OpenPOWER on IntegriCloud