summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/i915/intel_drv.h
Commit message (Collapse)AuthorAgeFilesLines
...
* | | drm/i915: Plop vlv/chv fifo sizes into crtc stateVille Syrjälä2017-03-031-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | Move the vlv/chv FIFO size tracking into the crtc_state. As with the wms for now this just acts as temporary storage. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170302171508.1666-6-ville.syrjala@linux.intel.com
* | | drm/i915: Plop vlv wm state into crtc_stateVille Syrjälä2017-03-031-9/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Relocate the vlv/chv wm state to live under intel_crtc_state. Note that for now this just behaves as a temporary storage. But it'll be easier to conver the thing over to properly pre-computing the state when it's already in the right place. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170302171508.1666-5-ville.syrjala@linux.intel.com
* | | drm/i915: Move vlv wms from crtc->wm_state to crtc->wm.active.vlvVille Syrjälä2017-03-031-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In an effort to make the vlv/chv wm code look and behave more like the ilk+ code, let's move the current active wms next to the corresponding ilk wms. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170302171508.1666-4-ville.syrjala@linux.intel.com
* | | drm/i915: Track plane fifo sizes under intel_crtcVille Syrjälä2017-03-031-26/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Track the plane fifo sizes under intel_crtc instead of under each intel_plane. Avoids looping over the planes in a bunch of places, and later we'll move this tracking into the crtc state properly. v2: Nuke intel_plane_wm_parameters (Maarten) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170302171508.1666-3-ville.syrjala@linux.intel.com
* | | drm/i915: Track visible planes in a bitmaskVille Syrjälä2017-03-031-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In a lot of place we wish to know which planes on the crtc are actually visible, or how many of them there are. Let's start tracking that in a bitmask in the crtc state. We already track enabled planes (ie. ones with an fb and crtc specified by the user) but that's not quite the same thing as enabled planes may still end up being invisible due to clipping and whatnot. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170302171508.1666-2-ville.syrjala@linux.intel.com
* | | drm/i915: Remove direct usages of intel_crtc->config from DDI codeAnder Conselvan de Oliveira2017-03-031-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove direct usages of intel_crtc->config from the DDI code. Functions that didn't yet take a pipe_config as an argument were coverted to do so. v2: s/pipe_config/const crtc_state/ (Ville) - take crtc from crtc_state. (Ville) Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170302125857.14665-7-ander.conselvan.de.oliveira@intel.com
* | | drm/i915: Pass intel_crtc to DDI functions called from crtc en/disableAnder Conselvan de Oliveira2017-03-031-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pass intel_crtc to functions intel_ddi_enable_transcoder_func(), intel_ddi_set_pipe_settings() and intel_ddi_set_vc_payload_alloc(), instead of the generic crtc type. By changing the functions intel_ddi_get_crtc_encoder() so that it receives an intel_crtc parameter, there is no need for the drm_crtc in the callers. Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170302125857.14665-6-ander.conselvan.de.oliveira@intel.com
* | | drm/i915: Pass pipe_config to fdi_link_train() functionsAnder Conselvan de Oliveira2017-03-031-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is preferred to pass pipe_config to functions instead of accessing crtc->config directly. Follow suit and pass pipe_config to the fdi link train functions. v2: Add const; s/pipe_config/crtc_state/ (Ville) Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170302125857.14665-5-ander.conselvan.de.oliveira@intel.com
* | | drm/i915: Pass intel_crtc to fdi_link_train() hooksAnder Conselvan de Oliveira2017-03-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The implementation of the fdi_link_train() hooks need an intel_crtc so just pass that instead of the generic crtc type. Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170302125857.14665-2-ander.conselvan.de.oliveira@intel.com
* | | drm/i915: Restore the invalid access without RPM warningChris Wilson2017-03-021-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A long time ago we turned off the warning as it was too painful, we had too much broken code. Turn it back on now as we are mostly clean and need to prevent returning to such orangeness. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Imre Deak <imre.deak@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170302074157.21631-2-chris@chris-wilson.co.uk Reviewed-by: Imre Deak <imre.deak@intel.com>
* | | drm/i915: Only enable DDI IO power domains after enabling DPLLAnder Conselvan de Oliveira2017-02-271-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to bspec, the DDI IO power domains should be enabled after enabling the DPLL and mapping it to the DDI. The current order doesn't seem to create problems with Skylake and Kabylake, but causes enable timeouts in Geminilake. v2: Rebase. - Take power domain references before sanitizing encoders. (Imre) - Add comment to get_encoder_power_domains() defition. (Ander) v3: Don't put the domain if called with HSW/BDW's analog encoder. (CI) v4: Put IO power domain before unmapping DPLL. (Imre) - Change return type of intel_ddi_get_power_domains() to u64. (Imre) Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> # v1 Reviewed-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170224141959.5955-1-ander.conselvan.de.oliveira@intel.com
* | | drm/i915: Check encoder type in enc_to_dig_port()Ander Conselvan de Oliveira2017-02-271-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Don't allow conversion from arbitraty encoder types to a digital port. Calling enc_to_dig_port() with the wrong encoder may seem far fetched, but certain paths of the ddi code may be called with hasell's analog encoder and the conversion is wrong for DP mst encoders too, so safe guard against it. v2: Warn if encoder type is unknown and device is not DDI. (Imre) v3: Remove stray hunk from rebase error. (Ander) Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170224141845.5836-1-ander.conselvan.de.oliveira@intel.com
* | | drm/i915: Store encoder power domain in struct intel_encoderAnder Conselvan de Oliveira2017-02-271-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The encoder power domain is obviously tied to the encoder, so store it in struct intel_encoder. This avoids some indirection. v2: Rebase Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170222063431.10060-3-ander.conselvan.de.oliveira@intel.com
* | | drm/i915: Store aux power domain in intel_dpAnder Conselvan de Oliveira2017-02-271-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The aux power domain only makes sense in the DP code. Storing it in struct intel_dp avoids some indirection. v2: Rebase Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170222063431.10060-2-ander.conselvan.de.oliveira@intel.com
* | | drm/i915: Introduce intel_ddi_dp_voltage_max()Ville Syrjälä2017-02-241-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rather than sprinkling ideas of how big the DDI buf translation tables are somewhere in intel_dp.c, let's concentrate it all in intel_ddi.c where the actual tables are defined. To that end we introduce intel_ddi_dp_voltage_max() which will actually look at the proper translation table to determine what is the maximum voltage swing level supported. v2: Mask out the preemphasis bits from the return value of intel_ddi_dp_voltage_max() Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170223174901.26749-1-ville.syrjala@linux.intel.com
* | | drm/i915/glk: Pass dev_priv to intel_atomic_setup_scalers()Ander Conselvan de Oliveira2017-02-231-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pass dev_priv to intel_atomic_setup_scalers(). The next patch will need a dev_priv pointer. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170223071600.14356-4-ander.conselvan.de.oliveira@intel.com
* | | drm/i915: Add power well SW/HW state verificationImre Deak2017-02-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Verify that the refcount of all power wells match their HW enabled state at the end of modeset HW state readout. Also add documentation on how the reference count for each power well is supposed to be acquired during initialization and HW state readout. Suggested by Ander. Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/1487345986-26511-6-git-send-email-imre.deak@intel.com
* | | drm/i915: struct_mutex is not required for allocating the framebufferChris Wilson2017-02-161-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We do not need the BKL struct_mutex in order to allocate a GEM object, nor to create the framebuffer, so resist the temptation to take the BKL willy nilly. As this changes the locking contract around internal API calls, the patch is a little larger than a plain removal of a pair of mutex_lock/unlock. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170215105919.7347-2-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
* | | drm/i915/dp: Reset the link params on HPD/connected boot/resumeManasi Navare2017-02-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The max link parameters should be set/reset only on HPD or connected boot case or on system resume. Add a flag reset_link_params to intel_dp to decide when to reset the max link parameters. This prevents the parameters from getting reset/overwritten through all other connector->funcs->detect() calls. This is important when link training fails and the max link params are modified to the lower fallback values. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1486515251-23469-1-git-send-email-manasi.d.navare@intel.com
* | | drm/i915: Remove unused function intel_ddi_get_link_dpll()Ander Conselvan de Oliveira2017-02-101-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function intel_ddi_get_link_dpll() was added in f169660ed4e5 ("drm/i915/dp: Add a standalone function to obtain shared dpll for HSW/BDW/SKL/BXT") to "allow for the implementation of a platform neutral upfront link training function", but such implementation never landed. So remove that function and clean up the exported shared DPLL interface. Fixes: f169660ed4e5 ("drm/i915/dp: Add a standalone function to obtain shared dpll for HSW/BDW/SKL/BXT") Cc: Durgadoss R <durgadoss.r@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1484310032-1863-1-git-send-email-ander.conselvan.de.oliveira@intel.com
* | | drm/i915: Make power domain masks 64 bit longAnder Conselvan de Oliveira2017-02-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are currently 30 power domains, which puts us pretty close to the limit with 32 bit masks. Prepare for the future and increase the limit to 64 bit. v2: Rebase v3: s/unsigned long long/u64/ (Joonas) Allow the 64th bit of the mask to be used. (Joonas) Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170209093121.24410-1-ander.conselvan.de.oliveira@intel.com
* | | drm/i915: Move ilk_pipe_pixel_rate() to intel_display.cVille Syrjälä2017-02-081-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | Move ilk_pipe_pixel_rate() next to its only caller (intel_crtc_compute_pixel_rate()). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170120182205.8141-15-ville.syrjala@linux.intel.com
* | | drm/i915: Replace the .modeset_commit_cdclk() hook with a more direct ↵Ville Syrjälä2017-02-081-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | .set_cdclk() hook With the cdclk state, all the .modeset_commit_cdclk() hooks are now pointless wrappers. Let's replace them with just a .set_cdclk() function pointer. However let's wrap that in a small helper that does the state comparison and prints a unified debug message across all platforms. We didn't even have the debug print on all platforms previously. This reduces the clutter in intel_atomic_commit_tail() a little bit. v2: Wrap .set_cdclk() in intel_set_cdclk() v3: Add kernel-docs v4: Deal with IS_GEN9_BC() Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170126195201.32638-1-ville.syrjala@linux.intel.com
* | | drm/i915: Track full cdclk state for the logical and actual cdclk frequenciesVille Syrjälä2017-02-081-10/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current dev_cdclk vs. cdclk vs. atomic_cdclk_freq is quite a mess. So here I'm introducing the "actual" and "logical" naming for our cdclk state. "actual" is what we'll bash into the hardware and "logical" is what everyone should use for state computaion/checking and whatnot. We'll track both using the intel_cdclk_state as both will need other differing parameters than just the actual cdclk frequency. While doing that we can at the same time unify the appearance of the .modeset_calc_cdclk() implementations a little bit. v2: Commit dev_priv->cdclk.actual since that already has the new state by the time .modeset_commit_cdclk() is called. v3: s/locical/logical/ and improve the docs a bit Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170120182205.8141-9-ville.syrjala@linux.intel.com
* | | drm/i915: Start moving the cdclk stuff into a distinct state structureVille Syrjälä2017-02-081-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce intel_cdclk state which for now will track the cdclk frequency, the vco frequency and the reference frequency (not sure we want the last one, but I put it there anyway). We'll also make the .get_cdclk() function fill out this state structure rather than just returning the current cdclk frequency. One immediate benefit is that calling .get_cdclk() will no longer clobber state stored under dev_priv unless ex[plicitly told to do so. Previously it clobbered the vco and reference clocks stored there on some platforms. We'll expand the use of this structure to actually precomputing the state and whatnot later. v2: Constify intel_cdclk_state_compare() v3: Document intel_cdclk_state_compare() v4: Deal with i945gm_get_cdclk() Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170207183345.19763-1-ville.syrjala@linux.intel.com
* | | drm/i915: Move most cdclk/rawclk related code to intel_cdclk.cVille Syrjälä2017-02-081-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let's try to shrink intel_display.c a bit by moving the cdclk/rawclk stuff to a new file. It's all reasonably self contained so we don't even have to add that many non-static symbols. We'll also take the opportunity to shuffle around the functions a bit to get things in a more consistent order based on the platform. v2: Add kernel-docs (Ander) v3: Deal with IS_GEN9_BC() v4: Deal with i945gm_get_cdclk() Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170207183305.19656-1-ville.syrjala@linux.intel.com
* | | drm/i915: Store the pipe pixel rate in the crtc stateVille Syrjälä2017-02-081-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rather than recomputing the pipe pixel rate on demand everywhere, let's just stick the precomputed value into the crtc state. v2: Rebase due to min_pixclk[] code movement Document the new pixel_rate struct member (Ander) Combine vlv/chv with bdw+ in intel_modeset_readout_hw_state() v3: Fix typos in commit message (David) Cc: Ander Conselvan De Oliveira <conselvan2@gmail.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170126195031.32343-1-ville.syrjala@linux.intel.com
* | | drm/i915/lspcon: Remove DPCD compare based resume time workaroundImre Deak2017-02-061-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This effectively reverts commit 489375c866c111f16cea93b2467ebe59c9022cc7 Author: Imre Deak <imre.deak@intel.com> Date: Mon Oct 24 19:33:31 2016 +0300 drm/i915/lspcon: Add workaround for resuming in PCON mode The workaround was added without considering that HPD is low during the failed AUX transfers the WA fixed. Since the previous patch we wait for HPD to get asserted. My tests also show that this happens _after_ the DPCD reads start to return correct values. This suggests that we don't need this WA any more, let's try to remove it to reduce the clutter. Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1485509961-9010-4-git-send-email-imre.deak@intel.com
* | | drm/i915/lspcon: Fix resume time initialization due to unasserted HPDImre Deak2017-02-061-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During system resume time initialization the HPD level on LSPCON ports can stay low for an extended amount of time, leading to failed AUX transfers and LSPCON initialization. Fix this by waiting for HPD to get asserted. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99178 Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: <stable@vger.kernel.org> # v4.9+ Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1485509961-9010-3-git-send-email-imre.deak@intel.com
* | | drm/i915: Add support for DP Video pattern compliance testsManasi Navare2017-01-261-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The intel_dp_autotest_video_pattern() function gets invoked through the compliance test handler on a HPD short pulse if the test type is set to DP_TEST_VIDEO_PATTERN. This performs the DPCD registers reads to read the requested test pattern, video pattern resolution, frame rate and bits per color value. The results of this analysis are handed off to userspace so that the userspace app can set the video pattern mode appropriately for the test result/response. When the test is requested with specific BPC value, we read the BPC value from the DPCD register. If this BPC value in intel_dp structure has a non-zero value and we're on a display port connector, then we use the value to calculate the bpp for the pipe. Also in this case if its a 18bpp video pattern request, then we force the dithering on pipe to be disabled since it causes CRC mismatches. The compliance_test_active flag is set at the end of the individual test handling functions. This is so that the kernel-side operations can be completed without the risk of interruption from the userspace app that is polling on that flag. v5: * Remove test_result variable * Populate the compliance test data at the end of the function (Jani Nikula) v4: *Return TEST_NAK on read failures and invalid values (Jani Nikula) * Address CRC mismatch errors v3: * Use the updated properly shifted bit definitions (Jani Nikula) * Force dithering to be disabled on 18bpp compliance test request (Manasi Navare) v2: * Updated the DPCD Register reads based on proper defines in header (Jani Nikula) * Squahsed the patch that forced the pipe bpp to compliance test bpp (Jani Nikula) Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1485274909-17470-1-git-send-email-manasi.d.navare@intel.com
* | | drm/i915: Add support for DP link training complianceManasi Navare2017-01-261-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support to handle automated DP compliance link training test requests. This patch has been tested with Unigraf DPR-120 DP Compliance device for testing Link Training Compliance. After we get a short pulse Compliance test request, test request values are read and hotplug uevent is sent in order to trigger another modeset during which the pipe is configured and link is retrained and enabled for link parameters requested by the test. v5: * Only modify the compliance structure after all validation is done (Jani Nikula) * Remove the variable test_result (Jani Nikula) v4: * Return TEST_NAK for read failures and invalid values (Jani Nikula) * Conver the test link BW to link rate before storing (Jani Nikula) v3: * Validate the test link rate and lane count as soon as the request comes (Jani Nikula) v2: * Validate the test lane count before using it in intel_dp_compute_config (Jani Nikula) Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1485274594-17361-1-git-send-email-manasi.d.navare@intel.com
* | | drm/i915: Move atomic state free from out of fence releaseChris Wilson2017-01-241-0/+2
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fences are required to support being released from under an atomic context. The drm_atomic_state struct may take a mutex when being released and so we cannot drop a reference to the drm_atomic_state from the fence release path directly, and so we need to defer that unreference to a worker. [ 326.576697] WARNING: CPU: 2 PID: 366 at kernel/sched/core.c:7737 __might_sleep+0x5d/0x80 [ 326.576816] do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffffc0359549>] intel_breadcrumbs_signaler+0x59/0x270 [i915] [ 326.576818] Modules linked in: rfcomm fuse snd_hda_codec_hdmi bnep snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device snd_timer input_leds led_class snd punit_atom_debug btusb btrtl btbcm btintel intel_rapl bluetooth i915 drm_kms_helper syscopyarea sysfillrect iwlwifi sysimgblt soundcore fb_sys_fops mei_txe cfg80211 drm pwm_lpss_platform pwm_lpss pinctrl_cherryview fjes acpi_pad parport_pc ppdev parport autofs4 [ 326.576899] CPU: 2 PID: 366 Comm: i915/signal:0 Tainted: G U 4.10.0-rc3-patser+ #5030 [ 326.576902] Hardware name: /NUC5PPYB, BIOS PYBSWCEL.86A.0031.2015.0601.1712 06/01/2015 [ 326.576905] Call Trace: [ 326.576920] dump_stack+0x4d/0x6d [ 326.576926] __warn+0xc0/0xe0 [ 326.576931] warn_slowpath_fmt+0x5a/0x80 [ 326.577004] ? intel_breadcrumbs_signaler+0x59/0x270 [i915] [ 326.577075] ? intel_breadcrumbs_signaler+0x59/0x270 [i915] [ 326.577079] __might_sleep+0x5d/0x80 [ 326.577087] mutex_lock+0x1b/0x40 [ 326.577133] drm_property_free_blob+0x1e/0x80 [drm] [ 326.577167] ? drm_property_destroy+0xe0/0xe0 [drm] [ 326.577200] drm_mode_object_unreference+0x5c/0x70 [drm] [ 326.577233] drm_property_unreference_blob+0xe/0x10 [drm] [ 326.577260] __drm_atomic_helper_crtc_destroy_state+0x14/0x40 [drm_kms_helper] [ 326.577278] drm_atomic_helper_crtc_destroy_state+0x10/0x20 [drm_kms_helper] [ 326.577352] intel_crtc_destroy_state+0x9/0x10 [i915] [ 326.577388] drm_atomic_state_default_clear+0xea/0x1d0 [drm] [ 326.577462] intel_atomic_state_clear+0xd/0x20 [i915] [ 326.577497] drm_atomic_state_clear+0x1a/0x30 [drm] [ 326.577532] __drm_atomic_state_free+0x13/0x60 [drm] [ 326.577607] intel_atomic_commit_ready+0x6f/0x78 [i915] [ 326.577670] i915_sw_fence_release+0x3a/0x50 [i915] [ 326.577733] dma_i915_sw_fence_wake+0x39/0x80 [i915] [ 326.577741] dma_fence_signal+0xda/0x120 [ 326.577812] ? intel_breadcrumbs_signaler+0x59/0x270 [i915] [ 326.577884] intel_breadcrumbs_signaler+0xb1/0x270 [i915] [ 326.577889] kthread+0x127/0x130 [ 326.577961] ? intel_engine_remove_wait+0x1a0/0x1a0 [i915] [ 326.577964] ? kthread_stop+0x120/0x120 [ 326.577970] ret_from_fork+0x22/0x30 Fixes: c004a90b7263 ("drm/i915: Restore nonblocking awaits for modesetting") Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170123212939.30345-1-chris@chris-wilson.co.uk Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.10-rc1+ Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
* | drm/i915: Track pinned vma in intel_plane_stateChris Wilson2017-01-191-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With atomic plane states we are able to track an allocation right from preparation, during use and through to the final free after being swapped out for a new plane. We can couple the VMA we pin for the framebuffer (and its rotation) to this lifetime and avoid all the clumsy lookups in between. v2: Remove residual vma on plane cleanup (Chris) v3: Add a description for the vma destruction in intel_plane_destroy_state (Maarten) References: https://bugs.freedesktop.org/show_bug.cgi?id=98829 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170116152131.18089-1-chris@chris-wilson.co.uk Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
* | drm/i915: Use new CRC debugfs APITomeu Vizoso2017-01-101-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The core provides now an ABI to userspace for generation of frame CRCs, so implement the ->set_crc_source() callback and reuse as much code as possible with the previous ABI implementation. When handling the pageflip interrupt, we skip 1 or 2 frames depending on the HW because they contain wrong values. For the legacy ABI for generating frame CRCs, this was done in userspace but now that we have a generic ABI it's better if it's not exposed by the kernel. v2: - Leave the legacy implementation in place as the ABI implementation in the core is incompatible with it. v3: - Use the "cooked" vblank counter so we have a whole 32 bits. - Make sure we don't mess with the state of the legacy CRC capture ABI implementation. v4: - Keep use of get_vblank_counter as in the legacy code, will be changed in a followup commit. v5: - Skip first frame or two as it's known that they contain wrong data. - A few fixes suggested by Emil Velikov. v6: - Rework programming of the HW registers to preserve previous behavior. v7: - Address whitespace issue. - Added a comment on why in the implementation of the new ABI we skip the 1st or 2nd frames. v9: - Add stub for intel_crtc_set_crc_source. v12: - Rebased. - Remove stub for intel_crtc_set_crc_source and instead set the callback to NULL (Jani Nikula). v15: - Rebased. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Robert Foss <robert.foss@collabora.com> irq Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170110134305.26326-2-tomeu.vizoso@collabora.com
* | Merge tag 'drm-misc-next-2016-12-30' of ↵Daniel Vetter2017-01-041-0/+3
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/git/drm-misc into drm-intel-next-queued Directly merge drm-misc into drm-intel since Dave is on vacation and we need the various drm-misc patches (fb format rework, drm mm fixes, selftest framework and others). Also pulled back -rc2 in first to resync with drm-intel-fixes and make sure I can reuse the exact rerere solutions from drm-tip for safety, and because I'm lazy. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
| * | drm/i915: Add a cursor hack to allow converting legacy page flip to atomic, v3.Maarten Lankhorst2016-12-191-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Do something similar to vc4, only allow updating the cursor state in-place through a fastpath when the watermarks are unaffected. This will allow cursor movement to be smooth, but changing cursor size or showing/hiding cursor will still fall back so watermarks can be updated. Only moving and changing fb is allowed. Changes since v1: - Set page flip to always_unused for trybot. - Copy fence correctly, ignore plane_state->state, should be NULL. - Check crtc_state for !active and modeset, go to slowpath if the case. Changes since v2: - Make error handling work correctly. (Matthew Auld) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/a8e4cb00-5171-14e5-bbe3-dadb654ff296@linux.intel.com
| * | drm: Don't include <drm/drm_encoder.h> in <drm/drm_crtc.h>Laurent Pinchart2016-12-181-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | <drm/drm_crtc.h> used to define most of the in-kernel KMS API. It has now been split into separate files for each object type, but still includes most other KMS headers to avoid breaking driver compilation. As a step towards fixing that problem, remove the inclusion of <drm/drm_encoder.h> from <drm/drm_crtc.h> and include it instead where appropriate. Also remove the forward declarations of the drm_encoder and drm_encoder_helper_funcs structures from <drm/drm_crtc.h> as they're not needed in the header. <drm/drm_encoder.h> now has to include <drm/drm_mode.h> and contain a forward declaration of struct drm_encoder in order to allow including it as the first header in a compilation unit. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sinclair Yeh <syeh@vmware.com> # For vmwgfx Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-2-git-send-email-laurent.pinchart+renesas@ideasonboard.com
* | drm/i915: Move intel_atomic_get_shared_dpll_state() to intel_dpll_mgr.cAnder Conselvan de Oliveira2017-01-021-2/+0
| | | | | | | | | | | | | | | | | | | | | | The function intel_atomic_get_shared_dpll_state() is only called from intel_dpll_mgr.c and it concerns the same data structures as the other functions in that file, so move it there and make it static. Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1483024933-3726-8-git-send-email-ander.conselvan.de.oliveira@intel.com
* | drm/i915: Rename intel_shared_dpll_config to intel_shared_dpll_stateAnder Conselvan de Oliveira2016-12-301-2/+2
| | | | | | | | | | | | | | | | | | | | Struct intel_shared_dpll_config is used to hold the state of the DPLL in the "atomic" sense, so call it state like everything else atomic. v2: Rebase Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v1) Link: http://patchwork.freedesktop.org/patch/msgid/1483024933-3726-4-git-send-email-ander.conselvan.de.oliveira@intel.com
* | drm/i915: Prevent PPS stealing from a normal DP port on VLV/CHVVille Syrjälä2016-12-191-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | VLV apparently gets upset if the PPS for a pipe currently driving an external DP port gets used for VDD stuff on another eDP port. The DP port falls over and fails to retrain when this happens, leaving the user staring at a black screen. Let's fix it by also tracking which pipe is driving which DP/eDP port. We'll track this under intel_dp so that we'll share the protection of the pps_mutex alongside the pps_pipe tracking, since the two things are intimately related. I had plans to reduce the protection of pps_mutex to cover only eDP ports, but with this we can't do that. Well, for for VLV/CHV at least. For other platforms it should still be possible, which would allow AUX communication to occur in parallel for multiple DP ports. v2: Drop stray crap from a comment (Imre) Grab pps_mutex when clearing active_pipe Fix a typo in the commit message v3: Make vlv_active_pipe() static Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481738423-29738-1-git-send-email-ville.syrjala@linux.intel.com
* | drm/i915: Intel panel downclock cleanupMika Kahola2016-12-131-1/+1
| | | | | | | | | | | | | | | | | | | | Let's switch to use dev_priv instead of dev when calling intel_find_panel_downclock() function. Signed-off-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481616169-16210-3-git-send-email-mika.kahola@intel.com
* | drm/i915: Intel panel detection cleanupMika Kahola2016-12-131-1/+1
| | | | | | | | | | | | | | | | | | | | Let's switch to use private dev_priv instead of dev when detecting intel panels. Signed-off-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481616169-16210-2-git-send-email-mika.kahola@intel.com
* | drm/i915: Move all the DP compliance data to a separate structManasi Navare2016-12-131-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch does not change anything functionally, just cleans up the DP compliance related variables and stores them all together in a separate struct intel_dp_compliance. There is another struct intel_dp_compliance_data to store all the test data. This makes it easy to reset the compliance variables through a memset instead of individual resetting. v2: * Removed functional changes for EDID (Jani Nikula) Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwl.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481329371-16306-1-git-send-email-manasi.d.navare@intel.com
* | drm/i915: Find fallback link rate/lane countManasi Navare2016-12-131-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If link training fails, then we need to fallback to lower link rate first and if link training fails at RBR, then fallback to lower lane count. This function finds the next lower link rate/lane count value after link training failure and limits the max link_rate and lane_count values to these fallback values. v7: * Remove unnecessary intializations and remove redundant call to intel_dp_common_rates (Jani Nikula) v6: * Cap the max link rate and lane count to the max values obtained during fallback link training (Daniel Vetter) v5: * Start the fallback at the lane count value passed not the max lane count (Jani Nikula) v4: * Remove the redundant variable link_train_failed v3: * Remove fallback_link_rate_index variable, just obtain that using the helper intel_dp_link_rate_index (Jani Nikula) v2: Squash the patch that returns the link rate index (Jani Nikula) Acked-by: Tony Cheng <tony.cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481252712-12925-1-git-send-email-manasi.d.navare@intel.com
* | drm/i915: Compute sink's max lane count/link BW at HotplugManasi Navare2016-12-131-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sink's capabilities are advertised through DPCD registers and get updated only on hotplug. So they should be computed only once in the long pulse handler and saved off in intel_dp structure for the use later. For this reason two new fields max_sink_lane_count and max_sink_link_bw are added to intel_dp structure. This also simplifies the fallback link rate/lane count logic to handle link training failure. In that case, the max_sink_link_bw and max_sink_lane_count can be reccomputed to match the fallback values lowering the sink capabilities due to link train failure. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1480984058-552-3-git-send-email-manasi.d.navare@intel.com
* | drm/i915/debugfs: Move out pipe CRC codeTomeu Vizoso2016-12-131-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation to using a generic API in the DRM core for continuous CRC generation, move the related code out of i915_debugfs.c into a new file. Eventually, only the Intel-specific code will remain in this new file. v2: Rebased. v6: Rebased. v7: Fix whitespace issue. v9: Have intel_display_crc_init accept a drm_i915_private instead. v12: Rebased. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1481545788-18194-1-git-send-email-tomeu.vizoso@collabora.com
* | drm/i915: Add intel_atomic_get_existing_crtc_state functionMahesh Kumar2016-12-071-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch Adds a function to extract intel_crtc_state from the atomic_state, if not available it returns NULL. v2 (from Paulo): - Fix white space problem detected by checkpatch. Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161201154940.24446-7-mahesh1.kumar@intel.com
* | drm/i915: Validate mode against max. link data rate for DP MSTDhinakaran Pandiyan2016-12-051-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Not validating the mode rate against max. link rate results in not pruning invalid modes. For e.g, a HBR2 5.4 Gbps 2-lane configuration does not support 4k@60Hz. But, we do not reject this mode. So, make use of the helpers in intel_dp to validate mode data rate against max. link data rate of a configuration. v3: Renamed local variables again for consistency (Manasi) v2: Renamed mode data rate local variable to be more explanatory. Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1479243546-17189-1-git-send-email-dhinakaran.pandiyan@intel.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
* | drm/i915: Make intel_pm_setup take dev_privTvrtko Ursulin2016-12-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | Function actually wants dev_priv so give it to it. v2: Commit message. (Joonas Lahtinen) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1480601805-14391-2-git-send-email-tvrtko.ursulin@linux.intel.com
* | drm/i915: abstract ddi being audio enabledLibin Yang2016-11-291-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Prepare for using the same code for judging ddi being audio enabled. No functional changes. Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Libin Yang <libin.yang@intel.com> Reviewed-by: Lyude <cpaul@redhat.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1480334827-112273-2-git-send-email-libin.yang@intel.com
OpenPOWER on IntegriCloud