summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/display
Commit message (Collapse)AuthorAgeFilesLines
...
| | * | drm/amd/display: Add plane capabilities to dc_capsNicholas Kazlauskas2019-03-197-0/+91
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] The current dc_caps doesn't provide the information needed to determine the count and type of each plane to be exposed to userspace. There are three types of DRM planes that are exposed to userspace: 1. Primary planes (can be used for modesetting) 2. Overlay planes (can be blended below or above a primary plane) 3. Cursor planes (blended topmost) We need to know the number and type of each in amdgpu_dm to expose to userspace. Hardware supports blending planes below, above or both ways depending on the ASIC. Alpha support is also ASIC dependent. Some hardware has dedicated pipes for overlays and other hardware combines the pipes. All of this should be exposed in a way that DM can query and use. [How] Introduce the dc_plane_cap structure that describes the capabilities for the hw planes. It describes: - the type of the plane - whether the plane can blend with planes below it - whether the plane can blend with planes above it - whether the plane supports per pixel alpha blending - supported formats on the plane (partial list for now) Pre DCN ASICs don't have their full capabilities described for now. They can be updated as needed in the future. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/display: Set stream->mode_changed when connectors changeNicholas Kazlauskas2019-03-191-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] The kms_plane@plane-position-covered-pipe-*-planes subtests can produce a sequence of atomic commits such that neither active_changed nor mode_changed but connectors_changed. When this happens we remove the old stream from the context and add a new stream but the new stream doesn't have mode_changed=true set. This incorrect programming sequence causes CRC mismatches to occur in the test. The stream->mode_changed value should be set whenever a new stream is created. [How] A new stream is created whenever drm_atomic_crtc_needs_modeset is true. We previously covered the active_changed and mode_changed conditions for the CRTC but connectors_changed is also checked within drm_atomic_crtc_needs_modeset. So just use drm_atomic_crtc_needs_modeset directly to determine the mode_changed flag. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/display: Respect aux return valuesThomas Lim2019-03-195-39/+129
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] The new aux implementation was not up to spec. This caused us to fail DP compliance as well as introduced serious delays during system resume. [How] Make dce_aux_transfer_raw return the operation result Make dce_aux_transfer_with_retries delay with udelay instead of msleep, and only on invalid reply. Also fail on the second invalid reply, third timeout, or first of any other error Convert return values to drm error codes in amdgpu_dm As the two aux transfer functions are now noticeably different, change the names to better reflect their functionality and document. There was one last call to dc_link_aux_transfer that should have retries, fix that Signed-off-by: David Francis <David.Francis@amd.com> Signed-off-by: Thomas Lim <Thomas.Lim@amd.com> Reviewed-by: David Francis <David.Francis@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Eric Yang <eric.yang2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/display: Add function to create 4d19 fixed pointTyler DiBattista2019-03-192-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] Implemented for future use Signed-off-by: Tyler DiBattista <tyler.dibattista@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/display: add full update commit hint structJun Lei2019-03-192-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In some cases we might need to do a full update. Add a commit_hints struct for future use Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/display: Poll pending DOWN_REP before enabling the linkMartin Tsai2019-03-193-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] With special monitor combination on MST, the UP_REQ could come after clear payload table. It makes the pending DOWN_REP fail to be handled after link training and the new DOWN_REQ will be queued until time out . [How] To move the current polling pending DOWN_REP procedure to after clear payload table to make sure the pending DOWN_REP can be done before enabling the link. Signed-off-by: Martin Tsai <martin.tsai@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/powerplay: implement interface to set watermarks for clock rangesHuang Rui2019-03-191-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements inteferface to set watermarks table for clock ranges on smu 11. It fills watermark table before it is written to SMC. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Kevin Wang <Kevin1.Wang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/powerplay: add interface to notify smu enable pme restore registerHuang Rui2019-03-191-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds interface to notify smu enable pme restore register for display and in smu v11 didn't have this implementation. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Kevin Wang <Kevin1.Wang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/powerplay: add interface to get current clocks for displayHuang Rui2019-03-191-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fills the amd_pp_clock_info data for display, it will get the current info in that structure. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Kevin Wang <Kevin1.Wang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/powerplay: add interface to request display clock voltageHuang Rui2019-03-191-5/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds interface to request display clock voltage, display will use it to request current display clock voltage. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/powerplay: add interface to get clock by type with voltage for displayHuang Rui2019-03-191-7/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds inteface to get clock by type with voltage, display will use it to get current clocks with voltage. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/powerplay: add interface to get clock by type with latency for ↵Huang Rui2019-03-191-7/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | display (v2) This patch adds get clock by type with latency, display will use it to get current clocks with latency. v2: fix the missed mutex lock before return. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/powerplay: add interface to get max high clocks for displayHuang Rui2019-03-191-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds interface to get max high clocks for display and in smu v11 didn't have this implementation. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kevin Wang <Kevin1.Wang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/powerplay: add get_clock_by_type interface for displayHuang Rui2019-03-191-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds get_clock_by_type interface for display, in smu v11 didn't have the implementation. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kevin Wang <Kevin1.Wang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/powerplay: add smu display configuration change functionHuang Rui2019-03-191-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds display configuration change function that creates the new path with sw smu driver instead of powerplay. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kevin Wang <Kevin1.Wang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/display: 3.2.19Mark McGarrity2019-03-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Mark McGarrity <mark.mcgarrity@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/display: Add ability to override bounding box in DC constructJun Lei2019-03-052-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a dc_bounding_box_overrides struct to define bb overrides. It is loaded in during DC init. Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/display: Make stream commits call into DC only onceDavid Francis2019-03-051-75/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] dc_commit_updates_for_stream is called twice per stream: once with the flip data and once will all other data. This causes problems when these DC calls have different numbers of planes For example, a commit with a pageflip on plane A and a non-pageflip change on plane B will first call into DC with just plane A, causing plane B to be disabled. Then it will call into DC with both planes, re-enabling plane B [How] Merge flip and full into a single bundle Apart from the single DC call, the logic should not be changed by this patch Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/display: optionally optimize edp link rate based on timingJosip Pavic2019-03-053-63/+140
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] eDP v1.4 allows panels to report link rates other than RBR/HBR/HBR2, that may be more optimal for the panel's timing. Power can be saved by using a link rate closer to the required bandwidth of the panel's timing. [How] Scan the table of reported link rates from the panel, and select the minimum link rate that satisfies the bandwidth requirements of the panel's timing. Include a flag to make the feature optional. Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/display: Add p_state_change_support flag to dc_clocksJun Lei2019-03-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Will be used to signify if P-state change is supported. Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/display: Clean up wait on vblank eventDavid Francis2019-03-051-11/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] The wait_for_vblank boolean in commit_tail was passed by reference into each stream commit, and if that commit was an asynchronous flip, it would disable vblank waits on all subsequent flips. This made the behaviour depend on crtc order in a non-intuitive way, although since the asynchronous pageflip flag is only used by the legacy IOCTLs at the moment it is never an issue [How] Find wait_for_vblank before doing any stream commits Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/display: Set flip pending for pipe splitWesley Chalmers2019-03-052-1/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [WHY] When doing split pipe, if one pipe is pending on flip, the entire plane's status should be flip pending, otherwise corruption can occur when OS writes to a surface prematurely. [HOW] Clear the flip pending bit before checking pipes, then OR the flip pending bits from all pipes together to create the flip pending status of the entire plane. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Eryk Brol <Eryk.Brol@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/display: Fix exception from AUX acquire failureAnthony Koo2019-03-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] AUX arbitration occurs between SW and FW components. When AUX acquire fails, it causes engine->ddc to be NULL, which leads to an exception when we try to release the AUX engine. [How] When AUX engine acquire fails, it should return from the function without trying to continue the operation. The upper level will determine if it wants to retry. i.e. dce_aux_transfer_with_retries will be used and retry. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/display: Reset planes that were disabled in init_pipesNicholas Kazlauskas2019-03-051-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] Seamless boot tries to reuse planes that were enabled for the first commit applied. In the case where Raven is booting with two monitors connected and the first commit contains two streams the screen corruption would occur because the second stream was trying to re-use a tg and plane that weren't previously enabled. The state on the first commit looks something like the following: TG0: enabled=1 TG1: enabled=0 TG2: enabled=0 TG3: enabled=0 New state: pipe=0, stream=0, plane=0, new_tg=0 New state: pipe=1, stream=1, plane=1, new_tg=1 New state: pipe=2, stream=NULL, plane=NULL, new_tg=NULL New state: pipe=3, stream=NULL, plane=NULL, new_tg=NULL Only one plane/tg is setup before we enter accelerated mode so we really want to disabling everything but that first plane. [How] Check if the stream is not NULL and if the tg is enabled before deciding whether to skip the plane disable. Also ensure we're also disabling on the current state's pipe_ctx so we don't overwrite the fields in the new pending state. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/display: Allow for plane-less resource reservationDmytro Laktyushkin2019-03-052-6/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change changes dc add plane logic to allow plane-less resource reservation (pipe split). If a free pipe_ctx (no plane_state attached) is the head pipe, and is found with a bottom pipe attached, assign the plane to add on the bottom pipe. In addition, prepend dcn10 to dcn10-specific reset_back_end_for_pipe and reset_hw_ctx_wrap Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/display: dcn add check surface in_useCharlene Liu2019-03-056-4/+97
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Driver need to poll the SURFACE_INUSE register to determine when to start the new task and write data to the checked surface. Implement the wait functions, and add the necessary hubbub registers. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/display: Add DCN_VM aperture registersEryk Brol2019-03-051-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] For later use by the DC VM implementation Signed-off-by: Eryk Brol <eryk.brol@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/display: make seamless boot work genericallyAnthony Koo2019-03-052-11/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] Seamless boot code not working on all ASICs because of some underflow issues caused by some uninitialized HW state. [How] Keep some logical and power gating init code in hw_init. Move some per pipe init code to enable accelerated mode Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/display: Remove redundant 'else' statement in dcn1_update_clocksFatemeh Darbehani2019-03-051-8/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] DM has impelemented new pp_smu interface. 'Else' is not longer needed. Signed-off-by: Fatemeh Darbehani <fatemeh.darbehani@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Acked-by: Yongqiang Sun <yongqiang.sun@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/display: Move enum gamut_remap_select to hw_shared.hEric Bernstein2019-03-053-14/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This enum definition is shared, so move it to a shared location. Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/display: 3.2.18mmcgarri2019-03-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: mmcgarri <mark.mcgarrity@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/display: PPLIB HookupJun Lei2019-03-0511-28/+78
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] Make dml and integration with pplib clearer. [How] Change the way the dml formula is initialized to make its values more clear. Restructure DC interface with pplib into rv_funcs. Cap clocks received from pplib. Signed-off-by: Jun Lei <Jun.Lei@amd.com> Signed-off-by: Eryk Brol <eryk.brol@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/display: Add disable triple buffering DC debug optionCharlene Liu2019-03-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added a "disable_tri_buf" DC debug option. When set to 1 feature will be off. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/display: Use vrr friendly pageflip throttling in DC.Mario Kleiner2019-03-051-4/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In VRR mode, keep track of the vblank count of the last completed pageflip in amdgpu_crtc->last_flip_vblank, as recorded in the pageflip completion handler after each completed flip. Use that count to prevent mmio programming a new pageflip within the same vblank in which the last pageflip completed, iow. to throttle pageflips to at most one flip per video frame, while at the same time allowing to request a flip not only before start of vblank, but also anywhere within vblank. The old logic did the same, and made sense for regular fixed refresh rate flipping, but in vrr mode it prevents requesting a flip anywhere inside the possibly huge vblank, thereby reducing framerate in vrr mode instead of improving it, by delaying a slightly delayed flip requests up to a maximum vblank duration + 1 scanout duration. This would limit VRR usefulness to only help applications with a very high GPU demand, which can submit the flip request before start of vblank, but then have to wait long for fences to complete. With this method a flip can be both requested and - after fences have completed - executed, ie. it doesn't matter if the request (amdgpu_dm_do_flip()) gets delayed until deep into the extended vblank due to cpu execution delays. This also allows clients which want to regulate framerate within the vrr range a much more fine-grained control of flip timing, a feature that might be useful for video playback, and is very useful for neuroscience/vision research applications. In regular non-VRR mode, retain the old flip submission behavior. This to keep flip scheduling for fullscreen X11/GLX OpenGL clients intact, if they use the GLX_OML_sync_control extensions glXSwapBufferMscOML(, ..., target_msc,...) function with a specific target_msc target vblank count. glXSwapBuffersMscOML() or DRI3/Present PresentPixmap() will not flip at the proper target_msc for a non-zero target_msc if VRR mode is active with this patch. They'd often flip one frame too early. However, this limitation should not matter much in VRR mode, as scheduling based on vblank counts is pretty futile/unusable under variable refresh duration anyway, so no real extra harm is done. According to some testing already done with this patch by Nicholas on top of my tests, IGT tests didn't report any problems. If fixes stuttering and flickering when flipping at rates below the minimum vrr refresh rate. Fixes: bb47de736661 ("drm/amdgpu: Set FreeSync state using drm VRR properties") Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: <stable@vger.kernel.org> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Michel Dänzer <michel@daenzer.net> Tested-by: Bruno Filipe <bmilreu@gmail.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | | | drm/amd/display: If one stream full updates, full update all planesDavid Francis2019-04-142-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] On some compositors, with two monitors attached, VT terminal switch can cause a graphical issue by the following means: There are two streams, one for each monitor. Each stream has one plane current state: M1:S1->P1 M2:S2->P2 The user calls for a terminal switch and a commit is made to change both planes to linear swizzle mode. In atomic check, a new dc_state is constructed with new planes on each stream new state: M1:S1->P3 M2:S2->P4 In commit tail, each stream is committed, one at a time. The first stream (S1) updates properly, triggerring a full update and replacing the state current state: M1:S1->P3 M2:S2->P4 The update for S2 comes in, but dc detects that there is no difference between the stream and plane in the new and current states, and so triggers a fast update. The fast update does not program swizzle, so the second monitor is corrupted [How] Add a flag to dc_plane_state that forces full updates When a stream undergoes a full update, set this flag on all changed planes, then clear it on the current stream Subsequent streams will get full updates as a result Signed-off-by: David Francis <David.Francis@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet Lakha@amd.com> Acked-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* | | | drm/amd/display: extending AUX SW TimeoutMartin Leung2019-04-112-6/+9
| |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] AUX takes longer to reply when using active DP-DVI dongle on some asics resulting in up to 2000+ us edid read (timeout). [How] 1. Adjust AUX poll to match spec 2. Extend the SW timeout. This does not affect normal operation since we exit the loop as soon as AUX acks. Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Joshua Aberback <Joshua.Aberback@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* | | drm/amd/display: Fix negative cursor pos programming (v2)Nicholas Kazlauskas2019-04-081-21/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] If the cursor pos passed from DM is less than the plane_state->dst_rect top left corner then the unsigned cursor pos wraps around to a large positive number since cursor pos is a u32. There was an attempt to guard against this in hubp1_cursor_set_position by checking the src_x_offset and src_y_offset and offseting the cursor hotspot within hubp1_cursor_set_position. However, the cursor position itself is still being programmed incorrectly as a large value. This manifests itself visually as the cursor disappearing or containing strange artifacts near the middle of the screen on raven. [How] Don't subtract the destination rect top left corner from the pos but add it to the hotspot instead. This happens before the pos gets passed into hubp1_cursor_set_position. This achieves the same result but avoids the subtraction wrap around. With this fix the original cursor programming logic can be used again. v2: add hunk that got dropped accidently when this patch was originally committed. (Alex) Fixes: 0921c41e1902831 ("drm/amd/display: Fix negative cursor pos programming") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Acked-by: Murton Liu <Murton.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* | | drm/amd/display: fix cursor black issuetiancyin2019-04-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] the member sdr_white_level of struct dc_cursor_attributes was not initialized, then the random value result that dcn10_set_cursor_sdr_white_level() set error hw_scale value 0x20D9(normal value is 0x3c00), this cause the black cursor issue. [how] just initilize the obj of struct dc_cursor_attributes to zero to avoid the random value. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Tianci Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* | | drm/amd/display: VBIOS can't be light up HDMI when restart systemPaul Hsieh2019-03-271-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] VBIOS will not post pixel rate > 340MHz. If driver set pixel rate > 340MHz and do restart bottom, VBIOS can't post HDMI monitor due to monitor is stay in HDMI2.0 state. [How] Program Scrambling_Enable and TMDS_Bit_Clock_Ratio when disable stream. Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* | | drm/amd/display: Only allow VRR when vrefresh is within supported rangeNicholas Kazlauskas2019-03-211-1/+3
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] Black screens or artifacting can occur when enabling FreeSync outside of the supported range of the monitor. This can happen since the supported range isn't always the min/max vrefresh range available for the monitor. [How] There was previously a fix that prevented this from happening in the low range but it didn't cover the upper range. Expand the condition to include both. Cc: Sun peng Li <Sunpeng.Li@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* | Merge branch 'drm-next-5.1' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie2019-03-126-19/+58
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into drm-next Fixes for 5.1: - Powerplay fixes - DC fixes - Fix locking around indirect register access in some cases - KFD MQD fix - Disable BACO for vega20 for now (fixes pending) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190307202528.3148-1-alexander.deucher@amd.com
| * | drm/amd/display: don't call dm_pp_ function from an fpu blockHarry Wentland2019-03-061-2/+6
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | Powerplay functions called from dm_pp_* functions tend to do a mutex_lock which isn't safe to do inside a kernel_fpu_begin/end block as those will disable/enable preemption. Rearrange the dm_pp_get_clock_levels_by_type_with_voltage calls to make sure they happen outside of kernel_fpu_begin/end. Cc: stable@vger.kernel.org Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Pass app_tf by value rather than by referenceNathan Chancellor2019-02-272-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clang warns when an expression that equals zero is used as a null pointer constant (in lieu of NULL): drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:4435:3: warning: expression which evaluates to zero treated as a null pointer constant of type 'const enum color_transfer_func *' [-Wnon-literal-null-conversion] TRANSFER_FUNC_UNKNOWN, ^~~~~~~~~~~~~~~~~~~~~ 1 warning generated. This warning is caused by commit bb47de736661 ("drm/amdgpu: Set FreeSync state using drm VRR properties") and it could be solved by using NULL instead of TRANSFER_FUNC_UNKNOWN or casting TRANSFER_FUNC_UNKNOWN as a pointer. However, after looking into it, there doesn't appear to be a good reason to pass app_tf by reference as it is never mutated along the way. This is the only code path in which app_tf is used: mod_freesync_build_vrr_infopacket -> build_vrr_infopacket_v2 -> build_vrr_infopacket_fs2_data Neither mod_freesync_build_vrr_infopacket or build_vrr_infopacket_v2 modify app_tf's value and build_vrr_infopacket_fs2_data expects just the value so we can avoid dereferencing anything by just passing in app_tf's value to mod_freesync_build_vrr_infopacket and build_vrr_infopacket_v2. There is no functional change because build_vrr_infopacket_fs2_data doesn't do anything if TRANSFER_FUNC_UNKNOWN is passed to it, the same as not calling build_vrr_infopacket_fs2_data at all like before this change when NULL was used for app_tf. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Fix issue with link_active state not correct for MSTAnthony Koo2019-02-271-4/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | [Why] For MST, link not disabled until all streams disabled [How] Add check for stream_count before setting link_active = false for MST Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Fix reference counting for struct dc_sink.Mathias Fröhlich2019-02-273-8/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reference counting in amdgpu_dm_connector for amdgpu_dm_connector::dc_sink and amdgpu_dm_connector::dc_em_sink as well as in dc_link::local_sink seems to be out of shape. Thus make reference counting consistent for these members and just plain increment the reference count when the variable gets assigned and decrement when the pointer is set to zero or replaced. Also simplify reference counting in selected function sopes to be sure the reference is released in any case. In some cases add NULL pointer check before dereferencing. At a hand full of places a comment is placed to stat that the reference increment happened already somewhere else. This actually fixes the following kernel bug on my system when enabling display core in amdgpu. There are some more similar bug reports around, so it probably helps at more places. kernel BUG at mm/slub.c:294! invalid opcode: 0000 [#1] SMP PTI CPU: 9 PID: 1180 Comm: Xorg Not tainted 5.0.0-rc1+ #2 Hardware name: Supermicro X10DAi/X10DAI, BIOS 3.0a 02/05/2018 RIP: 0010:__slab_free+0x1e2/0x3d0 Code: 8b 54 24 30 48 89 4c 24 28 e8 da fb ff ff 4c 8b 54 24 28 85 c0 0f 85 67 fe ff ff 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 <0f> 0b 49 3b 5c 24 28 75 ab 48 8b 44 24 30 49 89 4c 24 28 49 89 44 RSP: 0018:ffffb0978589fa90 EFLAGS: 00010246 RAX: ffff92f12806c400 RBX: 0000000080200019 RCX: ffff92f12806c400 RDX: ffff92f12806c400 RSI: ffffdd6421a01a00 RDI: ffff92ed2f406e80 RBP: ffffb0978589fb40 R08: 0000000000000001 R09: ffffffffc0ee4748 R10: ffff92f12806c400 R11: 0000000000000001 R12: ffffdd6421a01a00 R13: ffff92f12806c400 R14: ffff92ed2f406e80 R15: ffffdd6421a01a20 FS: 00007f4170be0ac0(0000) GS:ffff92ed2fb40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000562818aaa000 CR3: 000000045745a002 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? drm_dbg+0x87/0x90 [drm] dc_stream_release+0x28/0x50 [amdgpu] amdgpu_dm_connector_mode_valid+0xb4/0x1f0 [amdgpu] drm_helper_probe_single_connector_modes+0x492/0x6b0 [drm_kms_helper] drm_mode_getconnector+0x457/0x490 [drm] ? drm_connector_property_set_ioctl+0x60/0x60 [drm] drm_ioctl_kernel+0xa9/0xf0 [drm] drm_ioctl+0x201/0x3a0 [drm] ? drm_connector_property_set_ioctl+0x60/0x60 [drm] amdgpu_drm_ioctl+0x49/0x80 [amdgpu] do_vfs_ioctl+0xa4/0x630 ? __sys_recvmsg+0x83/0xa0 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x5b/0x160 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f417110809b Code: 0f 1e fa 48 8b 05 ed bd 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d bd bd 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffdd8d1c268 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000562818a8ebc0 RCX: 00007f417110809b RDX: 00007ffdd8d1c2a0 RSI: 00000000c05064a7 RDI: 0000000000000012 RBP: 00007ffdd8d1c2a0 R08: 0000562819012280 R09: 0000000000000007 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000c05064a7 R13: 0000000000000012 R14: 0000000000000012 R15: 00007ffdd8d1c2a0 Modules linked in: nfsv4 dns_resolver nfs lockd grace fscache fuse vfat fat amdgpu intel_rapl sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul chash gpu_sched crc32_pclmul snd_hda_codec_realtek ghash_clmulni_intel amd_iommu_v2 iTCO_wdt iTCO_vendor_support ttm snd_hda_codec_generic snd_hda_codec_hdmi ledtrig_audio snd_hda_intel drm_kms_helper snd_hda_codec intel_cstate snd_hda_core drm snd_hwdep snd_seq snd_seq_device intel_uncore snd_pcm intel_rapl_perf snd_timer snd soundcore ioatdma pcspkr intel_wmi_thunderbolt mxm_wmi i2c_i801 lpc_ich pcc_cpufreq auth_rpcgss sunrpc igb crc32c_intel i2c_algo_bit dca wmi hid_cherry analog gameport joydev This patch is based on agd5f/drm-next-5.1-wip. This patch does not require all of that, but agd5f/drm-next-5.1-wip contains at least one more dc_sink counting fix that I could spot. Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* | drm/amd/display: Use vrr friendly pageflip throttling in DC.Mario Kleiner2019-03-051-1/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In VRR mode, keep track of the vblank count of the last completed pageflip in amdgpu_crtc->last_flip_vblank, as recorded in the pageflip completion handler after each completed flip. Use that count to prevent mmio programming a new pageflip within the same vblank in which the last pageflip completed, iow. to throttle pageflips to at most one flip per video frame, while at the same time allowing to request a flip not only before start of vblank, but also anywhere within vblank. The old logic did the same, and made sense for regular fixed refresh rate flipping, but in vrr mode it prevents requesting a flip anywhere inside the possibly huge vblank, thereby reducing framerate in vrr mode instead of improving it, by delaying a slightly delayed flip requests up to a maximum vblank duration + 1 scanout duration. This would limit VRR usefulness to only help applications with a very high GPU demand, which can submit the flip request before start of vblank, but then have to wait long for fences to complete. With this method a flip can be both requested and - after fences have completed - executed, ie. it doesn't matter if the request (amdgpu_dm_do_flip()) gets delayed until deep into the extended vblank due to cpu execution delays. This also allows clients which want to regulate framerate within the vrr range a much more fine-grained control of flip timing, a feature that might be useful for video playback, and is very useful for neuroscience/vision research applications. In regular non-VRR mode, retain the old flip submission behavior. This to keep flip scheduling for fullscreen X11/GLX OpenGL clients intact, if they use the GLX_OML_sync_control extensions glXSwapBufferMscOML(, ..., target_msc,...) function with a specific target_msc target vblank count. glXSwapBuffersMscOML() or DRI3/Present PresentPixmap() will not flip at the proper target_msc for a non-zero target_msc if VRR mode is active with this patch. They'd often flip one frame too early. However, this limitation should not matter much in VRR mode, as scheduling based on vblank counts is pretty futile/unusable under variable refresh duration anyway, so no real extra harm is done. According to some testing already done with this patch by Nicholas on top of my tests, IGT tests didn't report any problems. If fixes stuttering and flickering when flipping at rates below the minimum vrr refresh rate. Fixes: bb47de736661 ("drm/amdgpu: Set FreeSync state using drm VRR properties") Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: <stable@vger.kernel.org> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Michel Dänzer <michel@daenzer.net> Tested-by: Bruno Filipe <bmilreu@gmail.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | Merge v5.0 into drm-nextDave Airlie2019-03-046-14/+36
|\ \ | |/ |/| | | | | | | | | | | There is a really hairy resolution involving amdgpu fixes, that I'd rather confirm here. Also some misc fixes are landed by me, but the pr has them as well. Signed-off-by: Dave Airlie <airlied@redhat.com>
| * drm/amd/display: Use vrr friendly pageflip throttling in DC.Mario Kleiner2019-02-271-4/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In VRR mode, keep track of the vblank count of the last completed pageflip in amdgpu_crtc->last_flip_vblank, as recorded in the pageflip completion handler after each completed flip. Use that count to prevent mmio programming a new pageflip within the same vblank in which the last pageflip completed, iow. to throttle pageflips to at most one flip per video frame, while at the same time allowing to request a flip not only before start of vblank, but also anywhere within vblank. The old logic did the same, and made sense for regular fixed refresh rate flipping, but in vrr mode it prevents requesting a flip anywhere inside the possibly huge vblank, thereby reducing framerate in vrr mode instead of improving it, by delaying a slightly delayed flip requests up to a maximum vblank duration + 1 scanout duration. This would limit VRR usefulness to only help applications with a very high GPU demand, which can submit the flip request before start of vblank, but then have to wait long for fences to complete. With this method a flip can be both requested and - after fences have completed - executed, ie. it doesn't matter if the request (amdgpu_dm_do_flip()) gets delayed until deep into the extended vblank due to cpu execution delays. This also allows clients which want to regulate framerate within the vrr range a much more fine-grained control of flip timing, a feature that might be useful for video playback, and is very useful for neuroscience/vision research applications. In regular non-VRR mode, retain the old flip submission behavior. This to keep flip scheduling for fullscreen X11/GLX OpenGL clients intact, if they use the GLX_OML_sync_control extensions glXSwapBufferMscOML(, ..., target_msc,...) function with a specific target_msc target vblank count. glXSwapBuffersMscOML() or DRI3/Present PresentPixmap() will not flip at the proper target_msc for a non-zero target_msc if VRR mode is active with this patch. They'd often flip one frame too early. However, this limitation should not matter much in VRR mode, as scheduling based on vblank counts is pretty futile/unusable under variable refresh duration anyway, so no real extra harm is done. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Michel Dänzer <michel@daenzer.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: set clocks to 0 on suspend on dce80Bhawanpreet Lakha2019-02-201-3/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] When a dce80 asic was suspended, the clocks were not set to 0. Upon resume, the new clock was compared to the existing clock, they were found to be the same, and so the clock was not set. This resulted in a blackscreen. [How] In atomic commit, check to see if there are any active pipes. If no, set clocks to 0 Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
| * drm/amd/display: fix optimize_bandwidth func pointer for dce80Bhawanpreet Lakha2019-02-202-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] optimize_bandwidth was using dce100_prepare_bandwidth this is incorrect [How] change it to dce100_optimize_bandwidth Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
OpenPOWER on IntegriCloud