summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/display/dc
Commit message (Collapse)AuthorAgeFilesLines
...
* drm/amd/display: Enable Seamless Boot Transition for Multiple StreamsMartin Leung2019-12-185-11/+66
| | | | | | | | | | | | | | | | | [why] dc previously had bugs that interfered with the ability to inherit a timing from a device with multiple streams (without flash/blanking). After this fix there is still a dependency on UEFI support. [how] fixed 3 bugs: loaded MPC state, changed bw_optimize flag to a counter instead of a boolean, and reading dpp/disp clk from HW to ensure we don't raise the clock's when we're not supposed to. Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Collapse resource arrays when pipe is disabledNoah Abradjian2019-12-181-10/+10
| | | | | | | | | | | | | | [Why] Currently, pipe resources are assigned to an index that matches the pipe position. However, if pipe 1 or 2 is disabled, there will be a gap in the arrays which causes a crash when iterating based on pipe_count. [How] Fix resource construct to assign resources to minimum available array index. Signed-off-by: Noah Abradjian <noah.abradjian@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: update chroma viewport waEric Yang2019-12-187-41/+305
| | | | | | | | | | | | | [Why] Need previously implemented chroma vp wa to work for rotation cases. [How] Implement rotation specific wa. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Use pipe_count for num of oppsNoah Abradjian2019-12-181-1/+1
| | | | | | | | | | | | | | [Why] There is one opp per pipe. For certain RN parts, the fourth pipe is disabled, so there is no opp for it. res_cap->num_opp is hardcoded to 4, so if we use that to iterate over opps we will crash. [How] Use the pipe_count value instead, which is not hardcoded and so will have the correct number. Signed-off-by: Noah Abradjian <noah.abradjian@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: AVI info package change due to spec updateQingqing Zhuo2019-12-181-1/+1
| | | | | | | | | YQ should be limited range for all cases. Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Add definition for number of backlight data pointsCamille Cho2019-12-181-1/+2
| | | | | | | | | | | | | [Why] A hardcoded number is used today [How] Add definition for number of BL data points Signed-off-by: Camille Cho <Camille.Cho@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Add interface to adjust DSC max target bpp limitJoshua Aberback2019-12-182-3/+13
| | | | | | | | | | | | | | [Why] For some use cases we need to be able to adjust the maximum target bpp allowed by DSC policy. [How] New interface dc_dsc_policy_set_max_target_bpp_limit Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Disable integerscaling for downscale and MPOAidan Yang2019-12-181-1/+17
| | | | | | | | | | | | | | | [Why] Integer scaling is applied to MPO planes when downscaling, MPO planes use variable taps and integer scaling sets taps=1 [How] Disable integer scaling on MPO planes, Disable integer scaling for downscaling planes Signed-off-by: Aidan Yang <Aidan.Yang@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Add wait for flip not pending on pipe unlockNoah Abradjian2019-12-181-3/+36
| | | | | | | | | | | | | | [Why] Lack of proper timing caused intermittent underflow on unplug external DP. A previous fix was invalid and caused S0i3 regression, so had to be reverted. [How] When unlocking pipe, wait for no pipes to have flip pending before unlocking. Signed-off-by: Noah Abradjian <noah.abradjian@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: disable lttpr for RNabdoulaye berthe2019-12-181-1/+1
| | | | | | | Signed-off-by: abdoulaye berthe <abdoulaye.berthe@amd.com> Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: HDMI 2.x audio bandwidth checkCharlene Liu2019-12-185-2/+57
| | | | | | | | | Add HDMI 2.x audio bandwidth check Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: add missing dcn link encoder regsRoman Li2019-12-185-6/+253
| | | | | | | | | | | | | | | [Why] The earlier change: "check phy dpalt lane count config" uses link encoder registers not defined properly. That caused regression with mst-enabled display not lighting up. [How] Add missing reg definitions. Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* amdgpu: Wrap FPU dependent functions in dc20Timothy Pearson2019-12-181-4/+16
| | | | | | | | | | | | | dc20 containes several FPU-dependent functions without proper FPU kernel mode enable/disable wrappers. Add the required wrappers for both x86 and POWER. This enables Navi DC20 support for POWER systems. v2: fix compilation Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* amdgpu: Enable initial DCN support on POWERTimothy Pearson2019-12-187-0/+72
| | | | | | | | | | | | | | DCN requires floating point support to operate. Add the appropriate x86/ppc64 guards and FPU / AltiVec / VSX context switches to DCN. Note that the current DC20 code doesn't contain all required FPU wrappers on x86 or POWER, so this patch is insufficient to fully enable DC20 on POWER. v2: s/X86_64/X86/g to retain previous behavior. Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* amdgpu: Prepare DCN floating point macros for generic arch supportTimothy Pearson2019-12-184-16/+22
| | | | | | | | | | Introduce DC_FP_START()/DC_FP_END() macros to help enable floating point kernel mode support across various architectures. v2: move copyright update to commit which adds the changes Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* Merge tag 'drm-next-5.6-2019-12-11' of ↵Daniel Vetter2019-12-17190-2716/+4721
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://people.freedesktop.org/~agd5f/linux into drm-next drm-next-5.6-2019-12-11: amdgpu: - Add MST atomic routines - Add support for DMCUB (new helper microengine for displays) - Add OEM i2c support in DC - Use vstartup for vblank events on DCN - Simplify Kconfig for DC - Renoir fixes for DC - Clean up function pointers in DC - Initial support for HDCP 2.x - Misc code cleanups - GFX10 fixes - Rework JPEG engine handling for VCN - Add clock and power gating support for JPEG - BACO support for Arcturus - Cleanup PSP ring handling - Add framework for using BACO with runtime pm to save power - Move core pci state handling out of the driver for pm ops - Allow guest power control in 1 VF case with SR-IOV - SR-IOV fixes - RAS fixes - Support for power metrics on renoir - Golden settings updates for gfx10 - Enable gfxoff on supported navi10 skus - Update MAINTAINERS amdkfd: - Clean up generational gfx code - Fixes for gfx10 - DIQ fixes - Share more code with amdgpu radeon: - PPC DMA fix - Register checker fixes for r1xx/r2xx - Misc cleanups From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191211223020.7510-1-alexander.deucher@amd.com
| * drm/amdgpu: fix license on Kconfig and MakefilesAlex Deucher2019-12-113-0/+3
| | | | | | | | | | | | | | | | amdgpu is MIT licensed. Fixes: ec8f24b7faaf3d ("treewide: Add SPDX license identifier - Makefile/Kconfig") Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: include linux/slab.h where neededArnd Bergmann2019-12-111-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Calling kzalloc() and related functions requires the linux/slab.h header to be included: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn21/dcn21_resource.c: In function 'dcn21_ipp_create': drivers/gpu/drm/amd/amdgpu/../display/dc/dcn21/dcn21_resource.c:679:3: error: implicit declaration of function 'kzalloc'; did you mean 'd_alloc'? [-Werror=implicit-function-declaration] kzalloc(sizeof(struct dcn10_ipp), GFP_KERNEL); A lot of other headers also miss a direct include in this file, but this is the only one that causes a problem for now. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amdgpu/display: add fallthrough commentAlex Deucher2019-12-091-0/+1
| | | | | | | | | | | | | | | | To avoid a compiler warning. Reviewed-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Extend DMCUB offload testing into dcn20/21Nicholas Kazlauskas2019-12-051-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] To quickly validate whether DMCUB is running and accepting commands for offload testing we want to intercept a common sequence as part of modeset programming. [How] OTG enable will cause the most impact in terms of golden register changes and it's a single register write. This approach was previously done in dcn10 code when it was shared with dcn20 but it wasn't ported over to the dcn20 code. Port over start, execute and wait sequence into dcn20_optc. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: correct log message for lttprabdoulaye berthe2019-12-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | [Why] When setting lttpr mode, the new mode to bet is not logged properly. [How] Update log message to show the right mode. Signed-off-by: abdoulaye berthe <abdoulaye.berthe@amd.com> Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: update dml related structsDmytro Laktyushkin2019-12-053-1/+6
| | | | | | | | | | | | | | | | | | In preparation for further changes Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Compare clock state member to determine optimization.Yongqiang Sun2019-12-051-1/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] It seems always request passive flip on RN due to incorrect compare clock state to determine optization. [How] Instead of calling memcmp, compare clock state member to determine the condition. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Increase the number of retries after AUX DEFERGeorge Shen2019-12-051-10/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] When a timeout occurs after a DEFER, some devices require more retries than in the case of a regular timeout. [How] In a timeout occurrence, check whether a DEFER has occurred before the timeout and retry MAX_DEFER_RETRIES retries times instead of MAX_TIMEOUT_RETRIES. Signed-off-by: George Shen <george.shen@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Abdoulaye Berthe <Abdoulaye.Berthe@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Change HDR_MULT checkKrunoslav Kovac2019-12-051-5/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] Currently we require HDR_MULT >= 1.0 There are scenarios where we need < 1.0 [How] Only guard against 0 - it will black-screen image. It is up to higher-level logic to decide what HDR_MULT values are allowed in each particular case. Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: 3.2.62Aric Cyr2019-12-051-1/+1
| | | | | | | | | | | | | | Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Implement DePQ for DCN2Reza Amini2019-12-052-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] Need support for more color management in 10bit surface. [How] Provide support for DePQ for 10bit surface Signed-off-by: Reza Amini <Reza.Amini@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: update dispclk and dppclk vco frequencyEric Yang2019-12-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | Value obtained from DV is not allowing 8k60 CTA mode with DSC to pass, after checking real value being used in hw, find out that correct value is 3600, which will allow that mode. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: fix cursor positioning for multiplane casesAric Cyr2019-12-051-9/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] Cursor position needs to take into account plane scaling as well. [How] Translate cursor coords from stream space to plane space. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Acked-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Limit NV12 chroma workaroundAnthony Koo2019-12-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] It is causing green Line at the bottom of SDR 480p MPO playback [How] Limit workaround to vertical > 512 Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: add dsc policy getterWenjing Liu2019-12-052-42/+75
| | | | | | | | | | | | | | | | | | dc needs to expose its internal dsc policy. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: remove spam DSC logWenjing Liu2019-12-051-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [why] add_dsc_to_stream_resource could be called for validation. Failing validation is completely fine. However failing it inside commit streams is bad. This code could be triggered for both contexts. The function itself cannot distinguish the caller, which makes it impossible to output the log only in the meaningful case (commit streams). Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: add dc dsc functions to return bpp range for pixel encodingWenjing Liu2019-12-052-9/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [why] Need to support 6 bpp for 420 pixel encoding only. [how] Add a dc function to determine what bpp range can be supported for given pixel encoding. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Remove redundant callNoah Abradjian2019-12-051-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] I was advised that we don't need this call of program_front_end, as earlier and later calls in the same sequence are sufficient. [How] Remove first call of program_front_end in dc_commit_state_no_check. Signed-off-by: Noah Abradjian <noah.abradjian@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Modify logic for when to wait for mpcc idleNoah Abradjian2019-12-051-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] I was advised that we may need to check for mpcc idle in more cases than just when opp_changed is true. Also, mpcc_inst is equal to pipe_idx, so remove for loop. [How] Remove opp_changed flag check and mpcc_inst loop. Signed-off-by: Noah Abradjian <noah.abradjian@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: check for repeater when setting aux_rd_interval.abdoulaye berthe2019-12-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] When training with repeater the aux read interval must be set to repeater specific aux_red_interval. This value is always 100us for CR. [How] Check for repeater when setting the aux_rd_interval in channel equalization. Use the right offset in the aux_rd_interval array Signed-off-by: abdoulaye berthe <abdoulaye.berthe@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: George Shen <George.Shen@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Remove flag check in mpcc updateNoah Abradjian2019-12-051-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] MPCC programming was being missed during certain split pipe enables due to full_update flag not being true. This caused a momentary flash on half the screen. After discussion, determined we should not have that flag check within update_mpcc, as it should always perform full programming when called. [How] Remove flag check. We call update_blending within insert_plane, so we do not need to replace its call from the if block. Signed-off-by: Noah Abradjian <noah.abradjian@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: update sr latency for renoir when using lpddr4Joseph Gravenor2019-12-051-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] DF team has produced more optimized sr latency numbers, for lpddr4 [How] change the sr laency in the lpddr4 wm table to the new latency number Signed-off-by: Joseph Gravenor <joseph.gravenor@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Split DMUB cmd type into type/subtypeNicholas Kazlauskas2019-12-052-4/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] Commands will be considered a stable ABI between driver and firmware. Commands are also split between DC commands, DAL feature commands, and VBIOS commands. Commands are currently not designated to a specific ID and the enum does not provide a stable ABI. We currently group all of these into a single command type of 8-bits. With the stable ABI consideration in mind it's not unreasonable to run out of command IDs. For cleaner separation and versioning split the commands into a main type and a subtype. [How] For commands where performance matters (like reg sequences) these are still considered main commands. Sub commands will be split by ownership/feature. Update existing command sequences to reflect new changes. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Return a correct error valueMikita Lipski2019-12-051-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | [why] The function is expected to return instance of the timing generator therefore we shouldn't be returning boolean in integer function, and we shouldn't be returning zero so changing it to -1. Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Save/restore link setting for disable phy when link retrainingHugo Hu2019-12-051-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] The link setting will be modify after disable phy and due to DP Compliance Fails. [How] Save and resotre link setting for disable link phy when link retraining. Signed-off-by: Hugo Hu <hugo.hu@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: add DP protocol versionAnthony Koo2019-12-052-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] We want to know DP protocol version [How] In DC create we initialize a cap to indicate the max DP protocol version supported Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: update p-state latency for renoir when using lpddr4Joseph Gravenor2019-12-051-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] DF team has produced more optimized latency numbers, for lpddr4 [How] change the p-state laency in the lpddr4 wm table to the new latency number Signed-off-by: Joseph Gravenor <joseph.gravenor@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Implement DePQ for DCN1Reza Amini2019-12-052-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] Need support for more color management in 10bit surface. [How] Provide support for DePQ for 10bit surface Signed-off-by: Reza Amini <Reza.Amini@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Reset steer fifo before unblanking the streamNikola Cornij2019-12-051-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [why] During mode transition steer fifo could overflow. Quite often it recovers by itself, but sometimes it doesn't. [how] Add steer fifo reset before unblanking the stream. Also add a short delay when resetting dig resync fifo to make sure register writes don't end up back-to-back, in which case the HW might miss the reset request. Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: fix dml20 min_dst_y_next_start calculationDmytro Laktyushkin2019-12-051-2/+1
| | | | | | | | | | | | | | | | | | Bring this calculation in line with HW programming guide. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Disable chroma viewport w/a when rotated 180 degreesMichael Strauss2019-12-056-7/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [WHY] Previous Renoir chroma viewport workaround fixed an MPO flicker by increasing the chroma viewport size. However, when the MPO plane is rotated 180 degrees, the viewport is read in reverse. Since the workaround increases viewport size, when reading in reverse it causes a vertical chroma offset. [HOW] Pass rotation value to viewport set functions Temporarily disable the chroma viewport w/a when hubp is rotated 180 degrees Signed-off-by: Michael Strauss <michael.strauss@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: add log for lttprabdoulaye berthe2019-12-051-32/+93
| | | | | | | | | | | | | | Signed-off-by: abdoulaye berthe <abdoulaye.berthe@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: fixed that I2C over AUX didn't read data issueBrandon Syu2019-12-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | [Why] The variable mismatch assignment error. [How] To use uint32_t replace it. Signed-off-by: Brandon Syu <Brandon.Syu@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd/display: Change the delay time before enabling FECLeo (Hanghong) Ma2019-12-051-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [why] DP spec requires 1000 symbols delay between the end of link training and enabling FEC in the stream. Currently we are using 1 miliseconds delay which is not accurate. [how] One lane RBR should have the maximum time for transmitting 1000 LL codes which is 6.173 us. So using 7 microseconds delay instead of 1 miliseconds. Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
OpenPOWER on IntegriCloud