summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/Makefile
Commit message (Collapse)AuthorAgeFilesLines
* drm: Split out drm_probe_helper.c from drm_crtc_helper.cDaniel Vetter2014-04-181-1/+1
| | | | | | | | | | | | | | | | | | This is leftover stuff from my previous doc round which I kinda wanted to do but didn't yet due to rebase hell. The modeset helpers and the probing helpers a independent and e.g. i915 uses the probing stuff but has its own modeset infrastructure. It hence makes to split this up. While at it add a DOC: comment for the probing libraray. It would be rather neat to pull some of the DocBook documenting these two helpers into in-line DOC: comments. But unfortunately kerneldoc doesn't support markdown or something similar to make nice-looking documentation, so the current state is better. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm: Add primary plane helpers (v3)Matt Roper2014-04-011-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | When we expose non-overlay planes to userspace, they will become accessible via standard userspace plane API's. We should be able to handle the standard plane operations against primary planes in a generic way via the modeset handler. Drivers that can program primary planes more efficiently, that want to use their own primary plane structure to track additional information, or that don't have the limitations assumed by the helpers are free to provide their own implementation of some or all of these handlers. v3: Tweak kerneldoc formatting slightly to avoid ugliness v2: - Move plane helpers to a new file (drm_plane_helper.c) - Tighten checks on update handler (check for scaling, CRTC coverage, subpixel positioning) - Pass proper panning parameters to modeset interface - Disallow disabling primary plane (and thus CRTC) if other planes are still active on the CRTC. - Use a minimal format list that should work on all hardware/drivers. Drivers may call this function with a more accurate plane list to enable additional formats they can support. Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Rob Clark <robdclark@gmail.com>
* drm/bridge: Add PTN3460 bridge driverSean Paul2014-03-241-0/+1
| | | | | | | | This patch adds a drm_bridge driver for the PTN3460 DisplayPort to LVDS bridge chip. Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
* drm/bochs: new driverGerd Hoffmann2013-12-231-0/+1
| | | | | | | | | | | | | DRM driver for (virtual) vga cards using the bochs dispi interface, such as the qemu standard vga (qemu -vga std). Don't bother supporting anything but 32bpp for now, even though the virtual hardware is able to do that. Known issue: mmap(/dev/fb0) doesn't work. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/panel: Add simple panel supportThierry Reding2013-12-171-0/+1
| | | | | | | | | | | | | Add a driver for simple panels. Such panels can have a regulator that provides the supply voltage and a separate GPIO to enable the panel. Optionally the panels can have a backlight associated with them so it can be enabled or disabled according to the panel's power management mode. Support is added for two panels: An AU Optronics 10.1" WSVGA and a Chunghwa Picture Tubes 10.1" WXGA panel. Signed-off-by: Thierry Reding <treding@nvidia.com>
* drm: Add panel supportThierry Reding2013-12-171-0/+1
| | | | | | | | | | | | | | | | | | | | | Add a very simple framework to register and lookup panels. Panel drivers can initialize a DRM panel and register it with the framework, allowing them to be retrieved and used by display drivers. Currently only support for DPMS and obtaining panel modes is provided. However it should be sufficient to enable a large number of panels. The framework should also be easily extensible to support more sophisticated kinds of panels such as DSI. The framework hasn't been tied into the DRM core, even though it should be easily possible to do so if that's what we want. In the current implementation, display drivers can simple make use of it to retrieve a panel, obtain its modes and control its DPMS mode. Note that this is currently only tested on systems that boot from a device tree. No glue code has been written yet for systems that use platform data, but it should be easy to add. Signed-off-by: Thierry Reding <treding@nvidia.com>
* drm: Add MIPI DSI bus supportAndrzej Hajda2013-12-171-0/+1
| | | | | | | | | | | | | | | MIPI DSI bus allows to model DSI hosts and DSI peripherals using the Linux driver model. DSI hosts are registered by the DSI host drivers. During registration DSI peripherals will be created from the children of the DSI host's device tree node. Support for registration from board-setup code will be added later when needed. DSI hosts expose operations which can be used by DSI peripheral drivers to access associated devices. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
* Merge tag 'drm/for-3.13-rc1' of git://anongit.freedesktop.org/tegra/linux ↵Dave Airlie2013-11-051-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into drm-next drm/tegra: Changes for v3.13-rc1 The biggest part of the changes is the decoupling of the host1x and DRM drivers followed by the move of Tegra DRM back to drivers/gpu/drm/tegra from whence it came. There is a lot of cleanup as well, and the drivers can now be properly unloaded and reloaded. HDMI support for the Tegra114 SoC was contributed by Mikko Perttunen. gr2d support was extended to Tegra114 and the gr3d driver that has been in the works for quite some time finally made it in. All pieces to run an OpenGL driver on top of an upstream kernel are now available. Support for syncpoint bases was added by Arto Merilainen. This is useful for synchronizing between command streams from different engines such as gr2d and gr3d. Erik Faye-Lund and Wei Yongjun contributed various small fixes. Thanks! * tag 'drm/for-3.13-rc1' of git://anongit.freedesktop.org/tegra/linux: (45 commits) drm/tegra: Reserve syncpoint base for gr3d drm/tegra: Reserve base for gr2d drm/tegra: Deliver syncpoint base to user space gpu: host1x: Add syncpoint base support gpu: host1x: Add 'flags' field to syncpt request drm/tegra: Disable clock on probe failure gpu: host1x: Disable clock on probe failure drm/tegra: Support bottom-up buffer objects drm/tegra: Add support for tiled buffer objects drm/tegra: Add 3D support drm/tegra: Introduce tegra_drm_submit() drm/tegra: Use symbolic names for gr2d registers drm/tegra: Start connectors with correct DPMS mode drm/tegra: hdmi: Enable VDD earlier for hotplug/DDC drm/tegra: hdmi: Fix build warnings drm/tegra: hdmi: Detect DVI-only displays drm/tegra: Add Tegra114 HDMI support drm/tegra: hdmi: Parameterize based on compatible property drm/tegra: hdmi: Rename tegra{2,3} to tegra{20,30} gpu: host1x: Add support for Tegra114 ...
| * drm/tegra: Move driver to DRM treeThierry Reding2013-10-311-0/+1
| | | | | | | | | | | | | | In order to make subsystem-wide changes easier, move the Tegra DRM driver back into the DRM tree. Signed-off-by: Thierry Reding <treding@nvidia.com>
* | Merge tag 'drm-intel-next-2013-10-18' of ↵Dave Airlie2013-10-251-1/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://people.freedesktop.org/~danvet/drm-intel into drm-next - CRC support from Damien and He Shuang. Long term this should allow us to test an awful lot modesetting corner cases automatically. So for me as the maintainer this is really big. - HDMI audio fix from Jani. - VLV dpll computation code refactoring from Ville. - Fixups for the gpu booster from last time around (Chris). - Some cleanups in the context code from Ben. - More watermark work from Ville (we'll be getting there ...). - vblank timestamp improvements from Ville. - CONFIG_FB=n support, including drm core changes to make the fbdev helpers optional. - DP link training improvements (Jani). - mmio vtable from Ben, prep work for future hw. * tag 'drm-intel-next-2013-10-18' of git://people.freedesktop.org/~danvet/drm-intel: (132 commits) drm/i915/dp: don't mention eDP bpp clamping if it doesn't affect bpp drm/i915: remove dead code in ironlake_crtc_mode_set drm/i915: crc support for hsw drm/i915: fix CRC debugfs setup drm/i915: wait one vblank when disabling CRCs drm/i915: use ->get_vblank_counter for the crc frame counter drm/i915: wire up CRC interrupt for ilk/snb drm/i915: add CRC #defines for ilk/snb drm/i915: extract display_pipe_crc_update drm/i915: don't Oops in debugfs for I915_FBDEV=n drm/i915: set HDMI pixel clock in audio configuration drm/i915: pass mode to ELD write vfuncs cpufreq: Add dummy cpufreq_cpu_get/put for CONFIG_CPU_FREQ=n drm/i915: check gem bo size when creating framebuffers drm/i915: Use unsigned long for obj->user_pin_count drm/i915: prevent tiling changes on framebuffer backing storage drm/i915: grab dev->struct_mutex around framebuffer_init drm/i915: vlv: fix VGA hotplug after modeset drm: add support for additional stereo 3D modes drm/i915: preserve dispaly init order on ByT ...
| * | drm: Add separate Kconfig option for fbdev helpersDaniel Vetter2013-10-111-1/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For drivers which might want to disable fbdev legacy support. Select the new option in all drivers for now, so this shouldn't result in any change. Drivers need some work anyway to make fbdev support optional (if they have it implemented, that is), so the recommended way to expose this is by adding per-driver options. At least as long as most drivers don't support disabling the fbdev support. v2: Update for new drm drivers msm and rcar-du. Note that Rob's msm driver can already take advantage of this, which allows us to build msm without any fbdev depencies in the kernel! v3: Move the MODULE_* stuff from the fbdev helper file to drm_crtc_helper.c. Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Acked-by: Dave Airlie <airlied@linux.ie> Reviewed-by: Chon Ming Lee <chon.ming.lee@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | DRM: Armada: Add Armada DRM driverRussell King2013-10-121-0/+1
|/ | | | | | | | | | | | | | | | | | | | | This patch adds support for the pair of LCD controllers on the Marvell Armada 510 SoCs. This driver supports: - multiple contiguous scanout buffers for video and graphics - shm backed cacheable buffer objects for X pixmaps for Vivante GPU acceleration - dual lcd0 and lcd1 crt operation - video overlay on each LCD crt via DRM planes - page flipping of the main scanout buffers - DRM prime for buffer export/import This driver is trivial to extend to other Armada SoCs. Included in this commit is the core driver with no output support; output support is platform and encoder driver dependent. Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* drm/msm: basic KMS driver for snapdragonRob Clark2013-08-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
* drm: remove procfs code, take 2Daniel Vetter2013-08-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So almost two years ago I've tried to nuke the procfs code already once before: http://lists.freedesktop.org/archives/dri-devel/2011-October/015707.html The conclusion was that userspace drivers (specifically libdrm device node detection) stopped relying on procfs in 2001. But after some digging it turned out that the drmstat tool in libdrm is still using those files (but only when certain options are set). So we've decided to keep profcs. But I when I've started to dig around again what exactly this tool does I've noticed that it tries to read the "mem", "vm", and "vma" files from procfs. Now as far my git history digging shows "mem" never did anything useful (at least in the version that first showed up in upstream history in 2004) and the file was remove in commit 955b12def42e83287c1bdb1411d99451753c1391 Author: Ben Gamari <bgamari@gmail.com> Date: Tue Feb 17 20:08:49 2009 -0500 drm: Convert proc files to seq_file and introduce debugfs Which means that for over 4 years drmstat has been broken, and no one cared. In my opinion that's proof enough that no one is actually using drmstat, and so that we can savely nuke the procfs support from drm. While at it fix up the error case cleanup for debugfs in drm_get_minor. v2: Fix dates, libdrm stopped relying on procfs for drm node detection in 2001. v3: fixup compilation warning for !CONFIG_DEBUG_FS, reported by Fengguang Wu. Cc: kbuild test robot <fengguang.wu@intel.com> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm: add flip-work helperRob Clark2013-08-191-1/+1
| | | | | | | | | | | | | A small helper to queue up work to do, from workqueue context, after a flip. Typically useful to defer unreffing buffers that may be read by the display controller until vblank. v1: original v2: wire up docbook + couple docbook fixes Signed-off-by: Rob Clark <robdclark@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm: add unified vma offset managerDavid Herrmann2013-07-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we want to map GPU memory into user-space, we need to linearize the addresses to not confuse mm-core. Currently, GEM and TTM both implement their own offset-managers to assign a pgoff to each object for user-space CPU access. GEM uses a hash-table, TTM uses an rbtree. This patch provides a unified implementation that can be used to replace both. TTM allows partial mmaps with a given offset, so we cannot use hashtables as the start address may not be known at mmap time. Hence, we use the rbtree-implementation of TTM. We could easily update drm_mm to use an rbtree instead of a linked list for it's object list and thus drop the rbtree from the vma-manager. However, this would slow down drm_mm object allocation for all other use-cases (rbtree insertion) and add another 4-8 bytes to each mm node. Hence, use the separate tree but allow for later migration. This is a rewrite of the 2012-proposal by David Airlie <airlied@linux.ie> v2: - fix Docbook integration - drop drm_mm_node_linked() and use drm_mm_node_allocated() - remove unjustified likely/unlikely usage (but keep for rbtree paths) - remove BUG_ON() as drm_mm already does that - clarify page-based vs. byte-based addresses - use drm_vma_node_reset() for initialization, too v4: - allow external locking via drm_vma_offset_un/lock_lookup() - add locked lookup helper drm_vma_offset_lookup_locked() v5: - fix drm_vma_offset_lookup() to correctly validate range-mismatches (fix (offset > start + pages)) - fix drm_vma_offset_exact_lookup() to actually do what it says - remove redundant vm_pages member (add drm_vma_node_size() helper) - remove unneeded goto - fix documentation Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@gmail.com>
* drm: Renesas R-Car Display Unit DRM driverLaurent Pinchart2013-06-271-0/+1
| | | | | | | | | | | The R-Car Display Unit (DU) DRM driver supports both superposition processors and all eight planes in RGB and YUV formats with alpha blending. Only VGA and LVDS encoders and connectors are currently supported. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* Merge tag 'v3.10-rc2' into drm-intel-next-queuedDaniel Vetter2013-05-211-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backmerge Linux 3.10-rc2 since the various (rather trivial) conflicts grew a bit out of hand. intel_dp.c has the only real functional conflict since the logic changed while dev_priv->edp.bpp was moved around. Also squash in a whitespace fixup from Ben Widawsky for i915_gem_gtt.c, git seems to do something pretty strange in there (which I don't fully understand tbh). Conflicts: drivers/gpu/drm/i915/i915_reg.h drivers/gpu/drm/i915/intel_dp.c Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
| * drm/tegra: Move drm to live under host1xTerje Bergstrom2013-04-221-1/+0
| | | | | | | | | | | | | | | | | | | | | | Make drm part of host1x driver. Signed-off-by: Arto Merilainen <amerilainen@nvidia.com> Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
| * drm: add new QXL driver. (v1.4)Dave Airlie2013-04-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | QXL is a paravirtual graphics device used by the Spice virtual desktop interface. The drivers uses GEM and TTM to manage memory, the qxl hw fencing however is quite different than normal TTM expects, we have to keep track of a number of non-linear fence ids per bo that we need to have released by the hardware. The releases are freed from a workqueue that wakes up and processes the release ring. releases are suballocated from a BO, there are 3 release categories, drawables, surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling. The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface ids. This requires a newer version of the QXL userspace driver, so shouldn't be enabled until that has been placed into your distro of choice. Authors: Dave Airlie, Alon Levy v1.1: fixup some issues in the ioctl interface with padding v1.2: add module device table v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq, don't try flush release ring (broken hw), fix -modesetting. v1.4: fbcon cpu usage reduction + suitable accel flags. Signed-off-by: Alon Levy <alevy@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | drm: Add struct drm_rect and assorted utility functionsVille Syrjälä2013-04-301-1/+2
|/ | | | | | | | | | | | | | | | | | | | struct drm_rect represents a simple rectangle. The utility functions are there to help driver writers. v2: Moved the region stuff into its own file, made the smaller funcs static inline, used 64bit maths in the scaled clipping function to avoid overflows (instead it will saturate to INT_MIN or INT_MAX). v3: Renamed drm_region to drm_rect, drm_region_clip to drm_rect_intersect, and drm_region_subsample to drm_rect_downscale. v4: Renamed some function parameters, improve kernel-doc comments a bit, and actually generate documentation for drm_rect.[ch]. v5: s/RETUTRNS/RETURNS/ Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* Merge branch 'tilcdc-next' of git://people.freedesktop.org/~robclark/linux ↵Dave Airlie2013-02-211-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into drm-next KMS driver for TI LCD controller * 'tilcdc-next' of git://people.freedesktop.org/~robclark/linux: drm/tilcdc: add support for LCD panels (v5) drm/tilcdc: add encoder slave (v2) drm/i2c: nxp-tda998x (v3) drm/tilcdc: add TI LCD Controller DRM driver (v4) drm/nouveau: use i2c encoder helper wrappers drm: i2c encoder helper wrappers drm/cma: add debugfs helpers drm: small fix in drm_send_vblank_event() drm: Don't set the plane->fb to NULL on successfull set_plane drm/cma-helper: fixup compilation Conflicts: drivers/gpu/drm/Kconfig drivers/gpu/drm/Makefile drivers/gpu/drm/drm_fb_cma_helper.c
| * drm/tilcdc: add TI LCD Controller DRM driver (v4)Rob Clark2013-02-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A simple DRM/KMS driver for the TI LCD Controller found in various smaller TI parts (AM33xx, OMAPL138, etc). This driver uses the CMA helpers. Currently only the TFP410 DVI encoder is supported (tested with beaglebone + DVI cape). There are also various LCD displays, for which support can be added (as I get hw to test on), and an external i2c HDMI encoder found on some boards. The display controller supports a single CRTC. And the encoder+ connector are split out into sub-devices. Depending on which LCD or external encoder is actually present, the appropriate output module(s) will be loaded. v1: original v2: fix fb refcnting and few other cleanups v3: get +/- vsync/hsync from timings rather than panel-info, add option DT max-bandwidth field so driver doesn't attempt to pick a display mode with too high memory bandwidth, and other small cleanups v4: remove some unneeded stuff from panel-info struct, properly set high bits for hfp/hsw/hbp for rev 2, add DT bindings docs Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Koen Kooi <koen@dominion.thruhere.net>
* | drm/omap: move out of stagingRob Clark2013-02-161-0/+1
|/ | | | | | | | | | Now that the omapdss interface has been reworked so that omapdrm can use dispc directly, we have been able to fix the remaining functional kms issues with omapdrm. And in the mean time the PM sequencing and many other of that open issues have been solved. So I think it makes sense to finally move omapdrm out of staging. Signed-off-by: Rob Clark <robdclark@gmail.com>
* drm: only build ati_pcigart if PCI enabledJames Hogan2012-11-281-1/+2
| | | | | | | | | | | | Prevent ati_pcigart.c being built unless PCI is enabled. The exported functions in this file are only used by drivers which depend on PCI (namely r128 and radeon), and it tries to use PCI specific functions (pci_unmap_page, pci_map_page, and pci_dma_mapping_error) that cause compiler errors when PCI is disabled. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm: Add NVIDIA Tegra20 supportThierry Reding2012-11-201-0/+1
| | | | | | | | | | | | | | | | This commit adds a KMS driver for the Tegra20 SoC. This includes basic support for host1x and the two display controllers found on the Tegra20 SoC. Each display controller can drive a separate RGB/LVDS output. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Mark Zhang <markz@nvidia.com> Reviewed-by: Mark Zhang <markz@nvidia.com> Tested-by: Mark Zhang <markz@nvidia.com> Tested-and-acked-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Terje Bergstrom <tbergstrom@nvidia.com> Tested-by: Terje Bergstrom <tbergstrom@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm: rename drm_dp_i2c_helper.c to drm_dp_helper.cDaniel Vetter2012-10-221-1/+1
| | | | | | | | | I want to move some dp link training helpers into this place, so in the future this won't be just about i2c any longer. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm: Renesas SH Mobile DRM driverLaurent Pinchart2012-09-181-0/+1
| | | | | | | | | | | | The SH Mobile LCD controller (LCDC) DRM driver supports the main graphics plane in RGB and YUV formats, as well as the overlay planes (in alpha-blending mode only). Only flat panel outputs using the parallel interface are supported. Support for SYS panels, HDMI and DSI is currently not implemented. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
* DRM: Add DRM KMS/FB CMA helperLars-Peter Clausen2012-09-181-0/+1
| | | | | | | | | | | This patchset introduces a set of helper function for implementing the KMS framebuffer layer for drivers which use the DRM GEM CMA helper function. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> [Make DRM_KMS_CMA_HELPER a boolean Kconfig option] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
* DRM: Add DRM GEM CMA helperSascha Hauer2012-09-181-0/+1
| | | | | | | | | | | | | | | Many embedded drm devices do not have a IOMMU and no dedicated memory for graphics. These devices use CMA (Contiguous Memory Allocator) backed graphics memory. This patch provides helper functions to be able to share the code. The code technically does not depend on CMA as the backend allocator, the name has been chosen because CMA makes for a nice, short but still descriptive function prefix. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Lars-Peter Clausen <lars@metafoo.de> [Make DRM_GEM_CMA_HELPER a boolean Kconfig option] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
* drm/kms: driver for virtual cirrus under qemuDave Airlie2012-05-171-0/+1
| | | | | | | | | | | | | | | | | | This is the initial driver for emulated cirrus GPU found in qemu. This driver only supports the emulated GPU and doesn't attempt to bind to any real cirrus GPUs. This driver is intended to be used with xf86-video-modesetting in userspace. It requires at least version 0.3.0 This follow the same design as ast and mgag200, and is based on work done by Matthew Garrett previously. This GPU has no hw cursor, and it can't scanout 32-bpp, only packed 24-bpp. i.e. it sucks. Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* mgag200: initial g200se driver (v2)Dave Airlie2012-05-171-0/+1
| | | | | | | | | | | | | | | | | | This is a driver for the G200 server engines chips, it doesn't driver any of the Matrix G series desktop cards. It will bind to G200 SE A,B, G200EV, G200WB, G200EH and G200ER cards. Its based on previous work done my Matthew Garrett but remodelled to follow the same style and flow as the AST server driver. It also works along the same lines as the AST server driver wrt memory management. There is no userspace driver planned, xf86-video-modesetting should be used. It also appears these GPUs have no ARGB hw cursors. v2: add missing tagfifo reset + G200 SE memory bw setup pieces. Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)Dave Airlie2012-05-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | This is the initial driver for the Aspeed Technologies chips found in servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It doesn't support the AST11xx due to lack of hw to test it on, and them requiring different codepaths. This driver is intended to be used with xf86-video-modesetting in userspace. This driver has a slightly different design than other KMS drivers, but future server chips will probably share similiar setup. As these GPUs commonly have low video RAM, it doesn't make sense to put the kms console in VRAM always. This driver places the kms console into system RAM, and does dirty updates to a copy in video RAM. When userspace sets a new scanout buffer, it forcefully evicts the video RAM console, and X can create a framebuffer that can use all of of video RAM. This driver uses TTM but in a very simple fashion to control the eviction to system RAM of the console, and multiple servers. v2: add s/r support, fix Kconfig. Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm: base prime/dma-buf support (v5)Dave Airlie2012-03-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the basic drm dma-buf interface layer, called PRIME. This commit doesn't add any driver support, it is simply and agreed upon starting point so we can work towards merging driver support for the next merge window. Current drivers with work done are nouveau, i915, udl, exynos and omap. The main APIs exposed to userspace allow translating a 32-bit object handle to a file descriptor, and a file descriptor to a 32-bit object handle. The flags value is currently limited to O_CLOEXEC. Acknowledgements: Daniel Vetter: lots of review Rob Clark: cleaned up lots of the internals and did lifetime review. v2: rename some functions after Chris preferred a green shed fix IS_ERR_OR_NULL -> IS_ERR v3: Fix Ville pointed out using buffer + kmalloc v4: add locking as per ickle review v5: allow re-exporting the original dma-buf (Daniel) Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Rob Clark <rob.clark@linaro.org> Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org> Reviewed-by: Inki Dae <inki.dae@samsung.com> Acked-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm: allow loading an EDID as firmware to override broken monitorCarsten Emde2012-03-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Broken monitors and/or broken graphic boards may send erroneous or no EDID data. This also applies to broken KVM devices that are unable to correctly forward the EDID data of the connected monitor but invent their own fantasy data. This patch allows to specify an EDID data set to be used instead of probing the monitor for it. It contains built-in data sets of frequently used screen resolutions. In addition, a particular EDID data set may be provided in the /lib/firmware directory and loaded via the firmware interface. The name is passed to the kernel as module parameter of the drm_kms_helper module either when loaded options drm_kms_helper edid_firmware=edid/1280x1024.bin or as kernel commandline parameter drm_kms_helper.edid_firmware=edid/1280x1024.bin It is also possible to restrict the usage of a specified EDID data set to a particular connector. This is done by prepending the name of the connector to the name of the EDID data set using the syntax edid_firmware=[<connector>:]<edid> such as, for example, edid_firmware=DVI-I-1:edid/1920x1080.bin in which case no other connector will be affected. The built-in data sets are Resolution Name -------------------------------- 1024x768 edid/1024x768.bin 1280x1024 edid/1280x1024.bin 1680x1050 edid/1680x1050.bin 1920x1080 edid/1920x1080.bin They are ignored, if a file with the same name is available in the /lib/firmware directory. The built-in EDID data sets are based on standard timings that may not apply to a particular monitor and even crash it. Ideally, EDID data of the connected monitor should be used. They may be obtained through the drm/cardX/cardX-<connector>/edid entry in the /sys/devices PCI directory of a correctly working graphics adapter. It is even possible to specify the name of an EDID data set on-the-fly via the /sys/module interface, e.g. echo edid/myedid.bin >/sys/module/drm_kms_helper/parameters/edid_firmware The new screen mode is considered when the related kernel function is called for the first time after the change. Such calls are made when the X server is started or when the display settings dialog is opened in an already running X server. Signed-off-by: Carsten Emde <C.Emde@osadl.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/usb: move usb support into a separate moduleDave Airlie2012-03-201-1/+3
| | | | | | | | | | In order to satisfy all the various Kconfig options between USB and DRM, we need to split the USB code out into a separate module and export symbols to it. This fixes build problems in -next reported by sfr. Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm: fix build with UDL if USB is a moduleDave Airlie2012-03-161-1/+2
| | | | | | reported by sfr on -next merge. Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/udl: initial UDL driver (v4)Dave Airlie2012-03-151-0/+1
| | | | | | | | | | | | | | | | | | This is an initial drm/kms driver for the displaylink devices. Supports fb_defio, supports KMS dumb interface supports 24bpp via conversion to 16bpp, hw can do this better. supports hot unplug using new drm core features. On an unplug, it disables connector polling, unplugs connectors from sysfs, unplugs fbdev layer (using Kay's API), drops all the USB device URBs, and call the drm core to unplug the device. This driver is based in large parts on udlfb.c so I've licensed it under GPLv2. Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm: kill drm_smanDaniel Vetter2011-12-221-1/+1
| | | | | | No longer used. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* gma500: Now connect up to the DRM build to finish the jobAlan Cox2011-11-161-0/+1
| | | | | Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* DRM: add DRM Driver for Samsung SoC EXYNOS4210.Inki Dae2011-10-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is a DRM Driver for Samsung SoC Exynos4210 and now enables only FIMD yet but we will add HDMI support also in the future. this patch is based on git repository below: git://people.freedesktop.org/~airlied/linux.git branch name: drm-next commit-id: 88ef4e3f4f616462b78a7838eb3ffc3818d30f67 you can refer to our working repository below: http://git.infradead.org/users/kmpark/linux-2.6-samsung branch name: samsung-drm We tried to re-use lowlevel codes of the FIMD driver(s3c-fb.c based on Linux framebuffer) but couldn't so because lowlevel codes of s3c-fb.c are included internally and so FIMD module of this driver has its own lowlevel codes. We used GEM framework for buffer management and DMA APIs(dma_alloc_*) for buffer allocation so we can allocate physically continuous memory for DMA through it and also we could use CMA later if CMA is applied to mainline. Refer to this link for CMA(Continuous Memory Allocator): http://lkml.org/lkml/2011/7/20/45 this driver supports only physically continuous memory(non-iommu). Links to previous versions of the patchset: v1: < https://lwn.net/Articles/454380/ > v2: < http://www.spinics.net/lists/kernel/msg1224275.html > v3: < http://www.spinics.net/lists/dri-devel/msg13755.html > v4: < http://permalink.gmane.org/gmane.comp.video.dri.devel/60439 > v5: < http://comments.gmane.org/gmane.comp.video.dri.devel/60802 > Changelog v2: DRM: add DRM_IOCTL_SAMSUNG_GEM_MMAP ioctl command. this feature maps user address space to physical memory region once user application requests DRM_IOCTL_SAMSUNG_GEM_MMAP ioctl. DRM: code clean and add exception codes. Changelog v3: DRM: Support multiple irq. FIMD and HDMI have their own irq handler but DRM Framework can regiter only one irq handler this patch supports mutiple irq for Samsung SoC. DRM: Consider modularization. each DRM, FIMD could be built as a module. DRM: Have indenpendent crtc object. crtc isn't specific to SoC Platform so this patch gets a crtc to be used as common object. created crtc could be attached to any encoder object. DRM: code clean and add exception codes. Changelog v4: DRM: remove is_defult from samsung_fb. is_default isn't used for default framebuffer. DRM: code refactoring to fimd module. this patch is be considered with multiple display objects and would use its own request_irq() to register a irq handler instead of drm framework's one. DRM: remove find_samsung_drm_gem_object() DRM: move kernel private data structures and definitions to driver folder. samsung_drm.h would contain only public information for userspace ioctl interface. DRM: code refactoring to gem modules. buffer module isn't dependent of gem module anymore. DRM: fixed security issue. DRM: remove encoder porinter from specific connector. samsung connector doesn't need to have generic encoder. DRM: code clean and add exception codes. Changelog v5: DRM: updated fimd(display controller) driver. added various pixel formats, color key and pixel blending features. DRM: removed end_buf_off from samsung_drm_overlay structure. this variable isn't used and end buffer address would be calculated by each sub driver. DRM: use generic function for mmap_offset. replaced samsung_drm_gem_create_mmap_offset() and samsung_drm_free_mmap_offset() with generic ones applied to mainline recentrly. DRM: removed unnecessary codes and added exception codes. DRM: added comments and code clean. Changelog v6: DRM: added default config options. DRM: added padding for 64-bit align. DRM: changed prefix 'samsung' to 'exynos' Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm: add usb frameworkDave Airlie2011-02-071-1/+1
| | | | | | | | | This adds an initial framework to plug USB graphics devices into the drm/kms subsystem. I've started writing a displaylink driver using this interface. Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm: remove i830 driverArnd Bergmann2011-02-071-1/+0
| | | | | | | | | | | | | This driver is one of the last users of the big kernel lock, which is going away. All the hardware supported by this driver also works with the newer i915 driver, and recent X.org releases only work with that driver anyway. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm: replace drawable ioctl by noopsDaniel Vetter2010-08-301-1/+1
| | | | | | | | | | | | | | | | | | The information supplied by userspace through these ioctls is only accessible by dev->drw_idr. But there's no in-tree user of that. Also userspace does not really care about return values of these ioctls, either. Only hw/xfree86/dri/dri.c from the xserver actually checks the return from adddraw and keeps on trying to create a kernel drawable every time somebody creates a dri drawable. But since that's now a noop, who cares. Therefore it's safe to replace these three ioctls with noops and rip out the implementation. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Kristian Høgsberg <krh@bitplanet.net> Reviewed-by: Michel Dänzer <michel@daenzer.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm: move ttm global code to core drmDave Airlie2010-08-041-1/+1
| | | | | | | | I wrote this for the prime sharing work, but I also noticed other external non-upstream drivers from a large company carrying a similiar patch, so I may as well ship it in master. Signed-off-by: Dave Airlie <airlied@redhat.com>
* Merge branch 'drm-tracepoints' into drm-testingDave Airlie2010-07-071-1/+4
|\
| * drm: add vblank event trace pointJesse Barnes2010-07-021-1/+4
| | | | | | | | | | | | | | | | Emit a trace point for vblank events. This can be helpful for mapping drawing activity against the vblank frequency and period. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | drm: Add support for platform devices to register as DRM devicesJordan Crouse2010-06-011-1/+1
|/ | | | | | | | | Allow platform devices without PCI resources to be DRM devices. [airlied: fixup warnings with dev pointers] Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm: Add generic multipart buffer.Pauli Nieminen2010-02-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Allocating multiple pages of memory for data that is coming from user space may fail. To fix memory allocation failures the buffer object should be split to multiple independ pages. drm buffer provides generic interface to copy and process large data arrays from user space. Interface includes allocation and free functions to allocate the buffer object and data storage pages. All access operations are performed relative to a internal pointer which is advanced with drm_buffer_advance function. The buffer can be accessed using drm_buffer_pointer_to_XXX functions if it is known that requested object doesn't split over a page boundary. These functions don't do any error checking to maximize performance. If there is large object which could be split there is special drm_buffer_read_object function. drm_buffer_read_object takes a pointer as argument which is used as temporary store for data if it is split over boundary in the buffer. Signed-off-by: Pauli Nieminen <suokkos@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* Merge remote branch 'korg/drm-vmware-staging' into drm-core-nextDave Airlie2009-12-181-0/+1
|\
OpenPOWER on IntegriCloud