summaryrefslogtreecommitdiffstats
path: root/drivers/bluetooth
Commit message (Collapse)AuthorAgeFilesLines
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2014-04-0212-112/+155
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: "Here is my initial pull request for the networking subsystem during this merge window: 1) Support for ESN in AH (RFC 4302) from Fan Du. 2) Add full kernel doc for ethtool command structures, from Ben Hutchings. 3) Add BCM7xxx PHY driver, from Florian Fainelli. 4) Export computed TCP rate information in netlink socket dumps, from Eric Dumazet. 5) Allow IPSEC SA to be dumped partially using a filter, from Nicolas Dichtel. 6) Convert many drivers to pci_enable_msix_range(), from Alexander Gordeev. 7) Record SKB timestamps more efficiently, from Eric Dumazet. 8) Switch to microsecond resolution for TCP round trip times, also from Eric Dumazet. 9) Clean up and fix 6lowpan fragmentation handling by making use of the existing inet_frag api for it's implementation. 10) Add TX grant mapping to xen-netback driver, from Zoltan Kiss. 11) Auto size SKB lengths when composing netlink messages based upon past message sizes used, from Eric Dumazet. 12) qdisc dumps can take a long time, add a cond_resched(), From Eric Dumazet. 13) Sanitize netpoll core and drivers wrt. SKB handling semantics. Get rid of never-used-in-tree netpoll RX handling. From Eric W Biederman. 14) Support inter-address-family and namespace changing in VTI tunnel driver(s). From Steffen Klassert. 15) Add Altera TSE driver, from Vince Bridgers. 16) Optimizing csum_replace2() so that it doesn't adjust the checksum by checksumming the entire header, from Eric Dumazet. 17) Expand BPF internal implementation for faster interpreting, more direct translations into JIT'd code, and much cleaner uses of BPF filtering in non-socket ocntexts. From Daniel Borkmann and Alexei Starovoitov" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1976 commits) netpoll: Use skb_irq_freeable to make zap_completion_queue safe. net: Add a test to see if a skb is freeable in irq context qlcnic: Fix build failure due to undefined reference to `vxlan_get_rx_port' net: ptp: move PTP classifier in its own file net: sxgbe: make "core_ops" static net: sxgbe: fix logical vs bitwise operation net: sxgbe: sxgbe_mdio_register() frees the bus Call efx_set_channels() before efx->type->dimension_resources() xen-netback: disable rogue vif in kthread context net/mlx4: Set proper build dependancy with vxlan be2net: fix build dependency on VxLAN mac802154: make csma/cca parameters per-wpan mac802154: allow only one WPAN to be up at any given time net: filter: minor: fix kdoc in __sk_run_filter netlink: don't compare the nul-termination in nla_strcmp can: c_can: Avoid led toggling for every packet. can: c_can: Simplify TX interrupt cleanup can: c_can: Store dlc private can: c_can: Reduce register access can: c_can: Make the code readable ...
| * Bluetooth: bluecard: Use del_timer_sync() in teardown pathThomas Gleixner2014-03-231-1/+1
| | | | | | | | | | | | | | | | Make sure no timer callback is running before releasing the datastructure which contains it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
| * Bluetooth: btmrvl: don't consume all vendor specific eventsAmitkumar Karwar2014-03-201-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If vendor specific HCI commands are received from application, we should send corresponding events to stack. These events should be consumed in driver, only if they are for the internal HCI commands generated by driver. This patch fixes the vendor command 0x3f stuck problem with above mentioned change. For example, hcitool cmd 3f 22 fe 06 22 21 20 43 50 00 Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
| * Bluetooth: Fix endianess issue in the ath3k driverPeng Chen2014-03-071-2/+2
| | | | | | | | | | | | | | | | The version is always in little endian format. This patch makes the driver work on both little and big endian CPUs. Signed-off-by: Peng Chen <pengchen@qca.qualcomm.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
| * Bluetooth: Add a new PID/VID 0cf3/e005 for AR3012.Peng Chen2014-03-052-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | usb devices info: T: Bus=06 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 13 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e005 Rev= 0.02 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Peng Chen <pengchen@qca.qualcomm.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
| * Bluetooth: Remove assignments in if-statementsValentin Ilie2014-03-059-35/+59
| | | | | | | | | | | | | | | | Remove assignment in if-statements to be consistent with the coding style. Signed-off-by: Valentin Ilie <valentin.ilie@gmail.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
| * Bluetooth: Stop BCSP/H5 timer before cleaning upMichael Knudsen2014-03-042-3/+5
| | | | | | | | | | | | | | | | | | | | | | When stopping BCSP/H5, stop the retransmission timer before proceeding to clean up packet queues. The previous code had a race condition where the timer could trigger after the packet lists and protocol structure had been removed which led to dereferencing NULL or use-after-free bugs. Signed-off-by: Michael Knudsen <m.knudsen@samsung.com> Reported-by: Kirill Tkhai <ktkhai@parallels.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
| * Bluetooth: append new supported device to the list [0b05:17d0]Andy Shevchenko2014-02-182-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The device found on Asus Z87 Expert motherboard requires firmware to work correctly. T: Bus=03 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0b05 ProdID=17d0 Rev=00.02 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
| * Bluetooth: sort the list of IDs in the source codeAndy Shevchenko2014-02-182-65/+65
| | | | | | | | | | | | | | | | | | This will help to manage table of supported IDs. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
| * Bluetooth: allocate static minor for vhciLucas De Marchi2014-02-181-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit bfacbb9 (Bluetooth: Use devname:vhci module alias for virtual HCI driver) added the module alias to hci_vhci module so it's possible to create the /dev/vhci node. However creating an alias without specifying the minor doesn't allow us to create the node ahead, triggerring module auto-load when it's first accessed. Starting with depmod from kmod 16 we started to warn if there's a devname alias without specifying the major and minor. Let's do the same done for uhid, kvm, fuse and others, specifying a fixed minor. In systems with systemd as the init the following will happen: on early boot systemd will call "kmod static-nodes" to read /lib/modules/$(uname -r)/modules.devname and then create the nodes. When first accessed these "dead" nodes will trigger the module loading. Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
| * Bluetooth: btusb: Add IMC Networks (Broadcom based)Jurgen Kramer2014-02-151-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for IMC Networks (Broadcom based) to btusb driver. Below the output of /sys/kernel/debug/usb/devices for this device: T: Bus=01 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3404 Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=240A649F8246 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Jurgen Kramer <gtmkramer@xs4all.nl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
| * Bluetooth: Add firmware update for Atheros 0cf3:311fOliver Neukum2014-02-132-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The device is not functional without firmware. The device without firmware: T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=311f Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb The device with firmware: T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=3007 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
| * Bluetooth: Enable Atheros 0cf3:311e for firmware uploadOliver Neukum2014-02-132-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The device will bind to btusb without firmware, but with the original buggy firmware device discovery does not work. No devices are detected. Device descriptor without firmware: T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=311e Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms with firmware: T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=311e Rev= 0.02 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* | Bluetooth: add module name for btwilinkPavel Machek2014-03-101-1/+2
|/ | | | | | | Btwilink help did not include module name, add it. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* Merge branch 'for-upstream' of ↵John W. Linville2014-01-083-13/+68
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
| * Bluetooth: Deal with USB devices that are faking CSR vendorMarcel Holtmann2014-01-041-1/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There exists a set of Bluetooth USB devices that show up on the USB bus as 0a12:0001 and identify themselves as devices from CSR. However they are not. When sending Read Local Version command they now have a split personality and say they are from Broadcom. < HCI Command: Read Local Version Information (0x04|0x0001) plen 0 > HCI Event: Command Complete (0x0e) plen 12 Read Local Version Information (0x04|0x0001) ncmd 1 status 0x00 HCI Version: 2.0 (0x3) HCI Revision: 0x3000 LMP Version: 2.0 (0x3) LMP Subversion: 0x420b Manufacturer: Broadcom Corporation (15) The assumption is that they are neither CSR nor Broadcom based devices and that they are designed and manufactured by someone else. For the most parts they follow the Bluetooth HCI specification and can be used as standard Bluetooth devices. However they have the minor problem that the Delete Stored Link Key command is not working as it should. During the Bluetooth controller setup, this command is needed if stored link keys are supported. For these devices it has to be assumed that this is broken and so just set a quirk to clearly indicate the behavior. After that the setup can just proceed. Now the trick part is to detect these faulty devices since we do not want to punish all CSR and all Broadcom devices. The original devices do actually work according to the specification. What is known so far is that these broken devices set the USB bcdDevice revision information to 1.0 or less. T: Bus=02 Lev=01 Prnt=01 Port=08 Cnt=03 Dev#= 9 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a12 ProdID=0001 Rev= 1.00 S: Manufacturer=Bluetooth v2.0 S: Product=Bluetooth V2.0 Dongle T: Bus=05 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a12 ProdID=0001 Rev= 0.07 In case of CSR devices, the bcdDevice revision contains the firmware build ID and that is normally a higher value. If the bcdDevice revision is 1.0 or less, then an extra setup stage is checking if Read Local Version returns CSR manufacturer information. If not then it will be assumed that this is a broken device and the Delete Stored Link Key command will be marked as broken. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
| * Bluetooth: Use MD SET register for changing SDIO Type-B to Type-AMarcel Holtmann2013-12-291-1/+2
| | | | | | | | | | | | | | | | | | The register for setting the SDIO card mode of a Type-B Bluetooth card is called MD SET. The MD STAT register is used for reading the current mode back. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
| * Bluetooth: Add support for vectored writes to virtual HCI driverMarcel Holtmann2013-12-291-11/+18
| | | | | | | | | | | | | | | | | | | | The Bluetooth virtual HCI driver is using a misc character device to allow emulation of HCI devices from userspace. This change enables the support for vectored writes. Previously this was failing with EINVAL since no complete H:4 packet was written. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
| * Bluetooth: Set HCI_QUIRK_RESET_ON_CLOSE for Socket SDIO cardsMarcel Holtmann2013-12-231-0/+3
| | | | | | | | | | | | | | | | | | | | The Socket Bluetooth SDIO cards are branded versions of Toshiba SD-BT2 and they do not support sending HCI_Reset as first command. To make this card work the HCI_QUIRK_RESET_ON_CLOSE quirk needs to be set before registering the controller. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* | Merge branch 'master' of ↵John W. Linville2014-01-062-0/+3
|\ \ | |/ |/| | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
| * Bluetooth: Add support for Toshiba Bluetooth device [0930:0220]Marco Piazza2013-12-042-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for new Toshiba Bluetooth device. T: Bus=05 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0930 ProdID=0220 Rev=00.02 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: Marco Piazza <mpiazza@gmail.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
* | Bluetooth: Enable autosuspend for Intel Bluetooth deviceTedd Ho-Jeong An2013-12-041-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables autosuspend for Intel Bluetooth device. After btusb is loaded for Intel Bluetooth device, the power/control attribute contains "on" value by default which disables the autosuspend. Based on the USB PM document(Documentation/usb/power-management.txt), kernel disabled the autosuspend for all devices other than hub by default. "The USB specification states that all USB devices must support power management. Nevertheless, the sad fact is that many devices do not support it very well. You can suspend them all right, but when you try to resume them they disconnect themselves from the USB bus or they stop working entirely. This seems to be especially prevalent among printers and scanners, but plenty of other types of device have the same deficiency. For this reason, by default the kernel disables autosuspend (the power/control attribute is initialized to "on") for all devices other than hubs. Hubs, at least, appear to be reasonably well-behaved in this regard." This document also described how the driver can enables the autosuspend by using an USB api. "Drivers can enable autosuspend for their devices by calling usb_enable_autosuspend(struct usb_device *udev); in their probe() routine, if they know that the device is capable of suspending and resuming correctly. This is exactly equivalent to writing "auto" to the device's power/control attribute." For Intel Bluetooth device, the autosuspend needs to be enabled so the device can transit to LPM(Low Power Mode) and ULPM(Ultra LPM) states after receiving suspend message from the host. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* | Bluetooth: Add support for Intel Bluetooth device [8087:0a2a]Tedd Ho-Jeong An2013-12-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for new Intel Bluetooth device. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=0a2a Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* | Bluetooth: ath3k: Add support for a new AR3012 deviceSujith Manoharan2013-12-042-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | T: Bus=02 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 9 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e05f Rev= 0.02 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Reported-by: Joshua Richenhagen <richenhagen@gmail.com> Signed-off-by: Sujith Manoharan <sujith@msujith.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* | Bluetooth: ath3k: Add support for another AR3012 cardSujith Manoharan2013-12-042-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=300b Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Reported-by: Face <falazemi@gmail.com> Signed-off-by: Sujith Manoharan <sujith@msujith.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* | Bluetooth: btmrvl: remove cal-data byte swapping and redundant mem copyBing Zhao2013-12-042-18/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | The device tree property can define the cal-data in proper order. There is no need to swap the bytes in driver. Also remove the redundant cal-data memory copy after removing the byte swapping. Cc: Mike Frysinger <vapier@chromium.org> Cc: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Hyuckjoo Lee <hyuckjoo.lee@samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* | Bluetooth: btmrvl: use cal-data from device-tree instead of conf fileBing Zhao2013-12-044-89/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some ARM versions of Chromebook need to download a new calibration data from host driver to firmware. They do have EEPROM but still need a piece of new calibration data in test mode. The cal-data is platform dependent. It's simpler and more feasible to use device tree based cal-data instead of configuration file based cal-data. This patch remove configuration file based cal-data downloading and replace it using cal-data from device tree. When CONFIG_OF is not selected, or the specific property is not present in the device tree, the calibration downloading will not happen. Cc: Mike Frysinger <vapier@chromium.org> Cc: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Hyuckjoo Lee <hyuckjoo.lee@samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* | Bluetooth: btmrvl: operate on 16-bit opcodes instead of ogf/ocfBing Zhao2013-12-042-20/+20
|/ | | | | | | | Replace ogf/ocf and its packing with 16-bit opcodes. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Merge branch 'master' of ↵John W. Linville2013-11-051-1/+0
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
| * Bluetooth: revert: "Bluetooth: Add missing reset_resume dev_pm_ops"Hans de Goede2013-10-021-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many btusb devices have 2 modes, a hid mode and a bluetooth hci mode. These devices default to hid mode for BIOS use. This means that after having been reset they will revert to HID mode, and are no longer usable as a HCI. Therefor it is a very bad idea to just blindly make reset_resume point to the regular resume handler. Note that the btusb driver has no clue how to switch these devices from hid to hci mode, this is done in userspace through udev rules, so the proper way to deal with this is to not have a reset-resume handler and instead let the usb-system re-enumerate the device, and re-run the udev rules. I must also note, that the commit message for the commit causing this problem has a very weak motivation for the change: "Add missing reset_resume dev_pm_ops. Missing reset_resume results in the following message after power management device test. This change sets reset_resume to btusb_resume(). [ 2506.936134] btusb 1-1.5:1.0: no reset_resume for driver btusb? [ 2506.936137] btusb 1-1.5:1.1: no reset_resume for driver btusb?" Making a change solely to silence a warning while also changing important behavior (normal resume handling versus re-enumeration) requires a commit message with a proper explanation why it is safe to do so, which clearly lacks here, and unsurprisingly it turns out to not be safe to make this change. Reverting the commit in question fixes bt no longer working on my Dell E6430 after a suspend/resume, and I believe it likely also fixes the following bugs: https://bugzilla.redhat.com/show_bug.cgi?id=988481 https://bugzilla.redhat.com/show_bug.cgi?id=1010649 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1213239 This reverts commit 502f769662978a2fe99d0caed5e53e3006107381. Cc: Shuah Khan <shuah.kh@samsung.com> Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
* | Bluetooth: Declare ath3k_table[] and ath3k_blist_tbl[] as constMarcel Holtmann2013-10-111-2/+2
| | | | | | | | | | | | | | | | The ath3k_table[] and ath3k_blist_tbl[] USB device tables can be declared as const. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* | Bluetooth: Declare bpa10x_table[] as constMarcel Holtmann2013-10-111-1/+1
| | | | | | | | | | | | | | The bpa10x_table[] device table can be declared as const Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* | Bluetooth: Declare bfusb_table[] as constMarcel Holtmann2013-10-111-1/+1
| | | | | | | | | | | | | | The bfusb_table[] device table can be declared as const Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* | Bluetooth: Declare btusb_table[] and blacklist_table[] as constMarcel Holtmann2013-10-111-2/+2
| | | | | | | | | | | | | | | | The btusb_table[] and blacklist_table[] USB device tables can be declared as const. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* | Bluetooth: Remove pointless parameter check in vhci_send_frame()Marcel Holtmann2013-10-111-8/+1
| | | | | | | | | | | | | | | | The hdev parameter of vhci_send_frame() is always valid. If it were not valid, then it would have crashed earlier in the call chain. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* | Bluetooth: Remove pointless parameter check in hci_uart_send_frame()Marcel Holtmann2013-10-111-8/+1
| | | | | | | | | | | | | | | | The hdev parameter of hci_uart_send_frame() is always valid. If it were not valid, then it would have crashed earlier in the call chain. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* | Bluetooth: Remove pointless parameter check in dtl1_hci_send_frame()Marcel Holtmann2013-10-111-8/+1
| | | | | | | | | | | | | | | | The hdev parameter of dtl1_hci_send_frame() is always valid. If it were not valid, then it would have crashed earlier in the call chain. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* | Bluetooth: Remove pointless parameter check in btuart_hci_send_frame()Marcel Holtmann2013-10-111-8/+1
| | | | | | | | | | | | | | | | The hdev parameter of btuart_hci_send_frame() is always valid. If it were not valid, then it would have crashed earlier in the call chain. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* | Bluetooth: Remove pointless parameter check in btmrvl_send_frame()Marcel Holtmann2013-10-111-8/+1
| | | | | | | | | | | | | | | | The hdev parameter of btmrvl_send_frame() is always valid. If it were not valid, then it would have crashed earlier in the call chain. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* | Bluetooth: Remove pointless parameter check in bt3c_hci_send_frame()Marcel Holtmann2013-10-111-8/+1
| | | | | | | | | | | | | | | | The hdev parameter of bt3c_hci_send_frame() is always valid. If it were not valid, then it would have crashed earlier in the call chain. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* | Bluetooth: Remove pointless parameter check in bluecard_hci_send_frame()Marcel Holtmann2013-10-111-8/+1
| | | | | | | | | | | | | | | | The hdev parameter of bluecard_hci_send_frame() is always valid. If it were not valid, then it would have crashed earlier in the call chain. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* | Bluetooth: Remove pointless parameter check in bfusb_send_frame()Marcel Holtmann2013-10-111-8/+1
| | | | | | | | | | | | | | | | The hdev parameter of bfusb_send_frame() is always valid. If it were not valid, then it would have crashed earlier in the call chain. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* | Bluetooth: Add hdev parameter to hdev->send driver callbackMarcel Holtmann2013-10-1113-28/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of masking hdev inside the skb->dev parameter, hand it directly to the driver as a parameter to hdev->send. This makes the driver interface more clear and simpler. This patch fixes all drivers to accept and handle the new parameter of hdev->send callback. Special care has been taken for bpa10x and btusb drivers that require having skb->dev set to hdev for the URB transmit complete handlers. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* | Bluetooth: Provide hdev parameter to hci_recv_frame() driver callbackMarcel Holtmann2013-10-1113-36/+21
| | | | | | | | | | | | | | | | | | | | To avoid casting skb->dev into hdev, just let the drivers provide the hdev directly when calling hci_recv_frame() function. This patch also fixes up all drivers to provide the hdev. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* | Bluetooth: Remove unused h4_check_data_len() functionMarcel Holtmann2013-10-111-24/+0
| | | | | | | | | | | | | | | | The function h4_check_data_len() is actually not used. So just remove it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* | Bluetooth: Remove unused btmrvl_ioctl() callbackMarcel Holtmann2013-10-101-10/+3
| | | | | | | | | | | | | | The btmrvl_ioctl() function is not used and thus remove it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* | Bluetooth: Remove unused dtl1_hci_ioctl() callbackMarcel Holtmann2013-10-101-11/+4
| | | | | | | | | | | | | | The dtl1_hci_ioctl() function is not used and thus remove it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* | Bluetooth: Remove unused btuart_hci_ioctl() callbackMarcel Holtmann2013-10-101-11/+4
| | | | | | | | | | | | | | The btuart_hci_ioctl() function is not used and thus remove it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* | Bluetooth: Remove unused bt3c_hci_ioctl() callbackMarcel Holtmann2013-10-101-11/+4
| | | | | | | | | | | | | | The bt3c_hci_ioctl() function is not used and thus remove it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* | Bluetooth: Remove unused bluecard_hci_ioctl() callbackMarcel Holtmann2013-10-101-11/+4
| | | | | | | | | | | | | | The bluecard_hci_ioctl() function is not used and thus remove it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
OpenPOWER on IntegriCloud