summaryrefslogtreecommitdiffstats
path: root/drivers/ata
Commit message (Collapse)AuthorAgeFilesLines
* libata-link: implement ata_link_abort()Tejun Heo2007-10-122-14/+37
| | | | | | | Implement ata_link_abort(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-link: separate out link initialization functionsTejun Heo2007-10-121-20/+64
| | | | | | | | Separate out link initialization into ata_link_init() and ata_link_init_sata_spd(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-link: make two port flags HRST_TO_RESUME and SKIP_D2H_BSY link flagsTejun Heo2007-10-125-18/+31
| | | | | | | | | | HRST_TO_RESUME and SKIP_D2H_BSY are link attributes. Move them to ata_link->flags. This will allow host and PMP links to have different attributes. ata_port_info->link_flags is added and used by LLDs to specify these flags during initialization. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-link: linkify config/EH related functionsTejun Heo2007-10-1214-109/+120
| | | | | | | | | | | | | Make the following functions deal with ata_link instead of ata_port. * ata_set_mode() * ata_eh_autopsy() and related functions * ata_eh_report() and related functions * suspend/resume related functions * ata_eh_recover() and related functions Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-link: linkify resetTejun Heo2007-10-1229-158/+189
| | | | | | | | | | | | | | Make reset methods and related functions deal with ata_link instead of ata_port. * ata_do_reset() * ata_eh_reset() * all prereset/reset/postreset methods and related functions This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-link: linkify EH action helpersTejun Heo2007-10-121-17/+18
| | | | | | | | | | Make ata_eh_about_to_do() and ata_eh_done() deal with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-link: linkify PHY-related functionsTejun Heo2007-10-1210-149/+165
| | | | | | | | | | | | | | | | | Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-link: implement and use link/device iteratorsTejun Heo2007-10-1212-145/+120
| | | | | | | | | | | | | | | | | Multiple links and different number of devices per link should be considered to iterate over links and devices. This patch implements and uses link and device iterators - ata_port_for_each_link() and ata_link_for_each_dev() - and ata_link_max_devices(). This change makes a lot of functions iterate over only possible devices instead of from dev 0 to dev ATA_MAX_DEVICES. All such changes have been examined and nothing should be broken. While at it, add a separating comment before device helpers to distinguish them better from link helpers and others. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-link: introduce ata_linkTejun Heo2007-10-1230-232/+247
| | | | | | | | | | | | | | | | | | | Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] pdc_adma: convert to new exception handling (EH) frameworkJeff Garzik2007-10-121-15/+67
| | | | Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Merge branch 'upstream-fixes' of ↵Linus Torvalds2007-10-111-9/+18
|\ | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] sata_mv: more S/G fixes
| * [libata] sata_mv: more S/G fixesJeff Garzik2007-10-121-9/+18
| | | | | | | | | | | | | | | | | | | | | | * corruption fix: we only want the lower 16 bits of length (0 == 64kb) * ditto: the upper layer sets max-phys-segments to LIBATA_MAX_PRD, so we must reset it to own hw-specific length. * delete unused mv_fill_sg() return value Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* | drivers/firmware: const-ify DMI API and internalsJeff Garzik2007-10-094-5/+5
|/ | | | | | | | | | | | | | | | | | | | | | | Three main sets of changes: 1) dmi_get_system_info() return value should have been marked const, since callers should not be changing that data. 2) const-ify DMI internals, since DMI firmware tables should, whenever possible, be marked const to ensure we never ever write to that data area. 3) const-ify DMI API, to enable marking tables const where possible in low-level drivers. And if we're really lucky, this might enable some additional optimizations on the part of the compiler. The bulk of the changes are #2 and #3, which are interrelated. #1 could have been a separate patch, but it was so small compared to the others, it was easier to roll it into this changeset. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_mv: correct S/G table limitsJeff Garzik2007-10-091-3/+6
| | | | | | | | | | | | The recent mv_fill_sg() rewrite, to fix a data corruption problem related to IOMMU virtual merging, forgot to account for the potentially-increased size of the scatter/gather table after its run. Additionally, the DMA boundary is reduced from 0xffffffff to 0xffff to more closely match the needs of mv_fill_sg(). Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/ata/pata_ixp4xx_cf.c: ioremap return code checkScott Thompson2007-10-031-0/+3
| | | | | | | | | | Add missing ioremap return checks. Signed-off-by: Scott Thompson <postfail <at> hushmail.com> Acked-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Ata: pata_marvell, use ioread* for iomap-ped memoryJiri Slaby2007-10-031-2/+2
| | | | | | | | | | | pata_marvell, use ioread* for iomap-ped memory read* on pci_iomapped memory is incorrect, fix it Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: fix for sata_mv >64KB DMA segmentsOlof Johansson2007-10-031-7/+19
| | | | | | | | | | | | Fix bug in sata_mv for cases where the IOMMU layer has merged SG entries to larger than 64KB. They need to be split up before being sent to the driver. Just for simplicity's sake, split up at 64K boundary instead of 64K size, since that's what the common code does anyway. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata_piix: add another TECRA M3 entry to broken suspend listTejun Heo2007-10-021-0/+7
| | | | | | | | | | | | There's a different version of DMI table for TECRA M3 where it has proper vendor and product name entry. Add the entry to the broken suspend list. Angus Turnbull reported and provided initial patch. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Angus Turnbull <angus@twinhelix.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* pata_sis: add missing UDMA5 timing value in sis_66_set_dmamode()Tejun Heo2007-09-251-1/+2
| | | | | | | | | | | | | sis_66_set_dmamode() also handles early UDMA100 (SIS630 ET) but is missing udma timing value for UDMA100. According to sis5513, this should be 0x8000. This caused UDMA100 device to fail on pata_sis till it downgrades to UDMA66 while it works fine on sis5513 at UDMA100. Reported by Adam Blech. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Adam Blech <desaster.area@addcom.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* sata_sil24: fix IRQ clearing race when PCIX_IRQ_WOC is usedTejun Heo2007-09-251-4/+12
| | | | | | | | | | | | | | | When PCIX_IRQ_WOC is used, sil24 has an inherent race condition between clearing IRQ pending and reading IRQ status. If IRQ pending is cleared after reading IRQ status, there's possibility of lost IRQ. If IRQ pending is cleared before reading IRQ status, spurious IRQs will occur. sata_sil24 till now cleared IRQ pending after reading IRQ status thus losing IRQs on machines where PCIX_IRQ_WOC was used. Reverse the order and ignore spurious IRQs if PCIX_IRQ_WOC. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] ahci: add ATI SB800 PCI IDshenry su2007-09-201-4/+6
| | | | | | | | ATI/AMD SB800 shares some device IDs with SB700, and SB800 adds two more device IDs:0x4394,0x4395. Signed-off-by: henry su <henry.su.ati@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-sff: Fix documentationAlan Cox2007-09-201-1/+4
| | | | | | | | Code moved to ioread/iowrite but the comment didn't Also note a posting issue Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: Update the blacklist with a few more devicesAlan Cox2007-09-201-0/+4
| | | | | Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* pata_ali/alim15x3: override 80-wire cable detection for Toshiba S1800-814Daniel Exner2007-09-111-0/+7
| | | | | | | | | | Add Toshiba S1800-814 to whitelist for both pata_ali and alim15x3, as it is correctly detected as 40-wire connected but this cable is short enough to still use transfer modes higher than UDMA33. Signed-off-by: Daniel Exner <dex@dragonslave.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* libata clear horkage on ata_dev_init()Tejun Heo2007-09-101-0/+1
| | | | | | | | dev->horkage should be cleared over device hotunplug/plug. Clear it in ata_dev_init(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata, IDE] add new VIA bridge to VIA PATA driversJoseph Chan2007-09-101-0/+1
| | | | | Signed-off-by: Joseph Chan <josephchan@via.com.tw> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* pata_it821x: fix lost interrupt with atapi devicesJeff Norden2007-09-101-0/+4
| | | | | | | | | | | | | | | | | Fix "lost" interrupt problem when using dma with CD/DVD drives in some configurations. This problem can make installing linux from media impossible for distro's that have switched to libata-only configurations. The simple fix is to eliminate the use of dma for reading drive status, etc, by checking the number of bytes to transferred. This change will only affect the behavior of atapi devices, not disks. There is more info at http://bugzilla.redhat.com/show_bug.cgi?id=242229 This patch is for 2.6.22.1 Signed-off-by: Jeff Norden <jnorden@math.tntech.edu> Reviewed-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Fix broken pata_via cable detectionLaurent Riffard2007-09-101-3/+10
| | | | | | | | | via_do_set_mode overwrites 80-wire cable detection bits. Let's preserve them. Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Fix sata_via write errors on PATA drive connected to VT6421Ondrej Zary2007-09-011-1/+1
| | | | | | | | | | | | I think that I've found and fixed the problem. There is a copy/paste bug in vt6421_set_dma_mode() function which causes wrong values to be written to PATA_UDMA_TIMING register. This patch fixes a copy/paste bug that breaks DMA modes on VT6421 PATA port. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] ata_piix: properly terminate DMI system listJeff Garzik2007-09-011-1/+4
| | | | | | If you don't terminate a list, bad things happen... Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] Bump driver versionsJeff Garzik2007-08-3131-31/+31
| | | | | | | Bump the versions for drivers that were modified, but had not already had a version number bump. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata_piix: implement IOCFG bit18 quirkTejun Heo2007-08-311-0/+36
| | | | | | | | | | | | Some notebooks need bit18 of IOCFG to be cleared for the drive bay to work even though the bit is NOOP according to the datasheet. This patch implement IOCFG bit18 quirk and apply it to Clevo M570U. http://bugzilla.kernel.org/show_bug.cgi?id=8051 Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: D. Angelis <dangelis@beta-cae.gr> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: implement BROKEN_HPA horkage and apply it to affected drivesTejun Heo2007-08-311-3/+8
| | | | | | | | Some drives choke on READ_NATIVE_MAX_ADDRESS[_EXT]. Implement ATA_HORKAGE_BROKEN_HPA and apply it to affected drives. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* sata_promise: FastTrack TX4200 is a second-generation chipMikael Pettersson2007-08-311-3/+3
| | | | | | | | | | | | | | | | | | | | This patch corrects sata_promise to classify FastTrack TX4200 (DID 3515/3519) as a second-generation chip. Promise's partial- source FT TX4200 driver confirms this classification. Treating it as a first-generation chip causes several problems: 1. Detection failures. This is a recent regression triggered by the hotplug-enabling changes in 2.6.23-rc1. 2. Various "failed to resume link for reset" warnings. This patch fixes <http://bugzilla.kernel.org/show_bug.cgi?id=8936>. Thanks to Stephen Ziemba for reporting the bug and for testing the fix. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Tested-by: Stephen Ziemba <sziemba@ecn.purdue.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* pata_marvell: Add more identifiersAlan Cox2007-08-311-0/+2
| | | | | | | This replaces the patch which incorrectly removed the 6145 Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata_piix: add Satellite U200 to broken suspend listTejun Heo2007-08-311-0/+7
| | | | | | | | | Satellite U200 also shares the problem. Add it to the broken suspend list. Original patch from John Schember. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: John Schember <john@nachtimwald.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata_piix: IDE mode SATA patch for Intel TolapaiJason Gaston2007-08-311-0/+27
| | | | | | | | | Resend trying to remove 8-bit characters in the email. This patch adds the Intel Tolapai IDE mode SATA controller DID's. Signed-off-by: Jason Gaston <jason.d.gaston@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-core: Allow translation setting to failAlan Cox2007-08-311-0/+5
| | | | | | | | | On some early drives (pre ATA1) this feature is not supported. If it fails then we know the drive geometry is the hardware geometry and the one we tried to set anyway so just carry on. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Merge branch 'upstream-linus' of ↵Linus Torvalds2007-08-234-11/+20
|\ | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: don't check n_sectors during revalidation if zero pata_via: Add Arima W730-K8 and other rebadgings pata_sis: Add the FSC Amilo and friends pata_pdc2027x: PLL detection fixes libata: fix n_sectors failure handling during revalidation
| * libata: don't check n_sectors during revalidation if zeroTejun Heo2007-08-231-1/+2
| | | | | | | | | | | | | | | | | | | | If the initial configuration fails early, n_sectors is left at zero. Checking against it during revalidation makes retried configuration fail due to n_sectors mismatch. Ignore zero n_sectors during revalidation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * pata_via: Add Arima W730-K8 and other rebadgingsAlan Cox2007-08-231-1/+4
| | | | | | | | | | | | | | | | More cable funnies Signed-off-by: Alan Cox <alan@redhat.com> Tested-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * pata_sis: Add the FSC Amilo and friendsAlan Cox2007-08-231-0/+1
| | | | | | | | | | | | | | More short cables Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * pata_pdc2027x: PLL detection fixesMikael Pettersson2007-08-231-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously I reported that the pata_pdc2027x PLL detection changes in kernel 2.6.22 broke the driver on my PowerMac: >pata_pdc2027x: Invalid PLL input clock 1691742kHz, give up! This is followed by a number of errors and speed reduction steps on the affected ports. There are two bugs in pata_pdc2027x's PLL detection code: 1. The PLL counter's start value is read before the chip is put in "test mode". Outside of test mode the counter is halted, and on the PowerMac the counter is zero because the chip hasn't been initialised by its BIOS. The fix is to move the read of the start value to after test mode is started, but before the mdelay() in test mode. This also improves the precision of the PLL detection. 2. The code to compute the number of PLL decrements during the mdelay() in test mode fails to consider that the PLL counter only is 30 bits wide. If there is a wraparound, it will compute an incorrect and much too large value. On the PowerMac, the start count is zero, the end count is a large 30-bit value, so wraparound occurs and an out of bounds PLL clock is detected. The fix is to mask the (start - end) computation to 30 bits. While debugging this I also noticed that pdc_read_counter() reads the two halves of the 30-bit PLL counter as 16-bit values, and then combines them as if the halves only are 15 bits wide. To avoid confusion, the halves should be read as 15-bit values. This patch implements all three changes. It fixes the PLL detection failure on my PowerMac, and doesn't cause any regressions on an x86 with an identical card. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * libata: fix n_sectors failure handling during revalidationTejun Heo2007-08-231-0/+4
| | | | | | | | | | | | | | | | | | | | | | If revalidation fails because device has different n_sectors after configuration the original n_sectors should be restored before failing revalidation. Without this fix, n_sectors difference will incorrectly and silently pass revalidation when revalidation is retried. Signed-off-by: Tejun Heo <htejun@gmail.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | pata_it821x: Fix regression/corruptorAlan Cox2007-08-231-1/+1
|/ | | | | | | | | | | | Whoever did the PCI revision patch slipped up on the it821x, and I didn't spot this at the time either. They moved the check for the errata from the 0x10 revision to 0x11. Put it back This one is important for 2.6.23 final as in some cases bad things will occur if 0x10 revision boards don't get the fixups. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* libata: adjust libata to ignore errors after spinupRyan Power2007-08-151-1/+1
| | | | | | | | | | | | | | Adjust libata to ignore errors after spinup This patch is to ignore errors from the spinup attempt if the drive is in the "standby id" state. Signed-off-by: Ryan Power <rpower@sysreset.com> Acked-by: Mark Lord <liml@rtr.ca> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata_piix: add TECRA M7 to broken suspend listTejun Heo2007-08-151-0/+7
| | | | | | | | Add TECRA M7 to broken suspend list. Reported by Marie Koreen. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Marie Koreen <kbug@koreen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* pata_hpt{37x|3x2n}: fix clock reporting (take 2)Sergei Shtylyov2007-08-152-7/+11
| | | | | | | | | | | | | | | | Fix several inconsistencies in these drivers WRT reporting the clocks: - when using DPLL mode, 'pata_hpt37x' driver reported the DPLL frequency as the PCI clock -- make it properly report both clocks and add the same ability to the 'pata_hpt3x2n' driver; - both drivers sometimes use "pata_hpt3*:" and sometimes "hpt3*:" in the messages -- make them use only the former one; - the message about failed DPLL stablizatios deserves KERN_ERR and a bang. :-) Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* pata_hpt37x: actually clock HPT374 with 50 MHz DPLL (take 2)Sergei Shtylyov2007-08-151-8/+4
| | | | | | | | | | | The DPLL tuning code always set up it for 66 MHz due to wrong UltraDMA mask including mode 5 used to check for the necessity of 66 MHz clocking -- this caused 66 MHz clock to be used for HPT374 chip that does not tolerate it. While fixing this, also remove PLL mode from the TODO list -- I don't think it's still a relevant item. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* pata_artop: fix UDMA5 for AEC6280[R] and UDMA6 for AEC6880[R]Bartlomiej Zolnierkiewicz2007-08-151-5/+14
| | | | | | | | | | | | | | | | | Maximum supported UDMA mode for AEC6280[R] is UDMA5 (not UDMA4) and for AEC6880[R] it is UDMA6 (not UDMA5): * Fix the problem by adding missing struct ata_port_info to artop_init_one(). * Use the right naming (s/626/628/). * Bump driver version. Fixes IDE->libata regression, problem was never present in IDE aec62xx driver. Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
OpenPOWER on IntegriCloud