summaryrefslogtreecommitdiffstats
path: root/arch
Commit message (Collapse)AuthorAgeFilesLines
* OMAP2/3: DMTIMER: Clear pending interrupts when stopping a timerTero Kristo2010-01-211-0/+13
| | | | | | | | | | | OMAP GP timers keep running for a few cycles after they are stopped, which can cause the timer to expire and generate an interrupt. The pending interrupt will prevent e.g. OMAP from entering suspend, thus we ack it manually. Only applicable on OMAP2/3/4. Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'omap-fixes' into omap-fixes-for-linusTony Lindgren2010-01-206-31/+66
|\
| * omap: Enable GPMC clock in gpmc_initOlof Johansson2010-01-201-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Don't assume that gpmc_l3_clk is on, enable it before touching configuration registers. Note that the current code assumes that this clock is always enabled. We are already setting smart idle and L3 autogating for GPMC clock in gpmc_init. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * OMAP: dma_chan[lch_head].flag & OMAP_DMA_ACTIVE tested twice in ↵Roel Kluin2010-01-191-1/+1
| | | | | | | | | | | | | | | | | | omap_dma_unlink_lch() The same flag and bits were tested twice. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap3: Fix cpu detectionTony Lindgren2010-01-192-18/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to set the omap_chip.oc carefully for the clocks to work. To fix this, set the omap_chip.oc in omap3_check_features() based on the CONTROL_IDCODE and silicon revision registers. Also add handling for 34xx es3.1.2 as es3.1 for now. Fixes booting on at least overo board. Based on an earlier patch by Paul Walmsley <paul@pwsan.com>. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap: Fix functions for dynamic remuxing of pinsTony Lindgren2010-01-192-11/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Make the omap_mux_read and write available for board code, and rename omap_mux_set_board_signals into omap_mux_write_array. Also add the related prototypes and comments into mux.h. In some cases we want to change the signals dynamically, mostly for power management. Note that we cannot use the signal names as they are set __init to save memory. Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap: Fix cmdline muxingTony Lindgren2010-01-191-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Looks like cmdline muxing got broken at some point when we decided to limit muxing to __init code. Currently omap_mux_entry list is not yet initialized when we try to initialize cmdline muxing. Fix this by calling omap_mux_init_list() before calling omap_mux_set_cmdline_signals(). Reported-by: Philip Balister <philip@balister.org> Tested-by: Philip Balister <philip@balister.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | Merge branch 'pm-fixes' of ↵Tony Lindgren2010-01-209-45/+95
|\ \ | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-fixes-for-linus
| * | PM debug: Fix warning when no CONFIG_DEBUG_FSSergio Aguirre2010-01-201-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Fix following warning when CONFIG_DEBUG_FS wasn't selected: arch/arm/mach-omap2/pm-debug.c:57: warning: 'pm_dbg_init' declared 'static' but never defined Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
| * | OMAP3: PM: DSS PM_WKEN to refill DMASubramani Venkatesh2010-01-201-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, DSS does not wakeup when there is a DMA request. DSS wake up event must be enabled so that the DMA request to refill the FIFO will wake up the CORE domain. Signed-off-by: Subramani Venkatesh <subramani.venkatesh@windriver.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
| * | OMAP: timekeeping: time should not stop during suspendKevin Hilman2010-01-201-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During suspend, the kernel timekeeping subsystem is shut down. Before suspend and upon resume, it uses a weak function read_persistent_clock() to determine the amount of time that elapsed during suspend. This function was not implemented on OMAP, so from the timekeeping subsystem perspective (and thus userspace as well) it appeared that no time elapsed during suspend. This patch uses the 32k sync timer as a the persistent clock. NOTE: This does *NOT* fully handle wrapping of the 32k sync timer, so more than one wrapping of the 32k sync timer during suspend may cause problems. Also note there are not interrupts when the 32k sync timer wraps, so something else has to be done. Reported-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
| * | OMAP3: PM: Force write last pad config register into save areaTero Kristo2010-01-201-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to OMAP3 erratas 1.157, 1.185 the save of the last pad register (ETK_D14 and ETK_D15) can fail sometimes when there is simultaneous OCP access to the SCM register area. Fixed by writing the last register to the save area. Also, optimized the delay loop for the HW save to include an udelay(1), which limits the number of unnecessary HW accesses to SCM register area during the save. Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Acked-by: Nishanth Menon <nm@ti.com> Reviewed-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
| * | OMAP: omap3_pm_get_suspend_state() error ignored in pwrdm_suspend_get()Roel Kluin2010-01-201-2/+4
| | | | | | | | | | | | | | | | | | | | | val is an u64 pointer, we need an int to check the error. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
| * | OMAP3: PM: Enable wake-up from McBSP2, 3 and 4 modulesPeter Ujfalusi2010-01-201-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | Wake-up from McBSP ports are needed, especially when the THRESHOLD dma mode is in use for audio playback. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
| * | OMAP3: PM debug: fix build error when !CONFIG_DEBUG_FSManjunatha GK2010-01-202-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PM debug code fails to build on when CONFIG_DEBUG_FS is not enabled. Build error log: arch/arm/mach-omap2/built-in.o: In function `omap_sram_idle': arch/arm/mach-omap2/pm34xx.c:449: undefined reference to `pm_dbg_regset_save' arch/arm/mach-omap2/pm34xx.c:460: undefined reference to `pm_dbg_regset_save' arch/arm/mach-omap2/built-in.o: In function `configure_vc': arch/arm/mach-omap2/pm34xx.c:1237: undefined reference to `pm_dbg_regset_init' arch/arm/mach-omap2/pm34xx.c:1238: undefined reference to `pm_dbg_regset_init' make: *** [.tmp_vmlinux1] Error 1 This patch fixes the above errors. Kernel booting is tested on omap zoom2 and zoom3 boards. Signed-off-by: Manjunatha GK <manjugk@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
| * | OMAP3: PM: Removing redundant and potentially dangerous PRCM configrationSripathy, Vishwanath2010-01-201-11/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As part of Core domain context restoration while coming out of off mode there are some registers being restored which are not required to be restored. ROM code will have restored them already. Overwriting some of them can have potential side effect. Eg: CM_CLKEN_PLL register should not be written while dpll is locked. Tested on OMAP 3430 SDP for suspend/resume and off mode with sleep_while_idle enabled. Signed-off-by: Vishwanath BS <vishwanath.bs@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
| * | OMAP3: Fixed ARM aux ctrl register save/restoreTero Kristo2010-01-201-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | Current value is stored on SDRAM and it is written back during wakeup. Previously a static value of 0x72 was written there. Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Acked-by: Thara Gopinath <thara@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
| * | OMAP3: CPUidle: Fixed timer resolutionTero Kristo2010-01-201-1/+1
| | | | | | | | | | | | | | | | | | | | | Previously used u32 as temporary data storage that wraps around at 4.294s. Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
| * | OMAP3: PM: Remove duplicate code blocksSanjeev Premi2010-01-201-18/+0
| | | | | | | | | | | | | | | | | | | | | | | | This patch removes code blocks that are repeated in function prcm_setup_regs(). Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
| * | OMAP3: PM: Disable interrupt controller AUTOIDLE before WFITero Kristo2010-01-203-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OMAP interrupt controller goes to unknown state when there is right combination of l3,l4 sleep/wake-up transitions, l4 autoidle in interrupt controller and some interrupt. When this happens, interrupts are not delivered to ARM anymore and ARM will remain in WFI (wait for interrupt) until interrupt controller is forced to wake-up (i.e. lauterbach). Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
| * | OMAP3: PM: Enable system control module autoidleTero Kristo2010-01-201-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Enable the auto-idle feature of the SCM block to save some additional power. Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
| * | OMAP3: PM: Ack pending interrupts before entering suspendTero Kristo2010-01-203-0/+9
| |/ | | | | | | | | | | | | | | Suspending drivers may still generate interrupts just before their suspend is completed. Any pending interrupts here will prevent sleep. Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* | OMAP1 clock: fix for "BUG: spinlock lockup on CPU#0"Paul Walmsley2010-01-201-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Commit 52650505fbf3a6ab851c801f54e73e76c55ab8da caused clock initialization to fail on OMAP1 with "BUG: spinlock lockup on CPU#0" -- this is because omap1_select_table_rate() and omap1_round_to_table_rate() call clk_get_rate() with the clockfw spinlock held. Fix by accessing the rate directly from the internal clock framework functions. Thanks to Tony Lindgren <tony@atomide.com> for reporting and testing the fix. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com>
* | OMAP4: clocks: Fix the clksel_rate struct DPLL divsRajendra Nayak2010-01-201-31/+31
| | | | | | | | | | | | | | | | | | | | For all DPLL's the valid dividers are same as the values to be programmed in the register. 0 is an invalid value. The changes are generated by updating the script which autogenerates the file modifed in the patch. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* | OMAP4: PRCM: Fix the base address for CHIRONSS reg definesRajendra Nayak2010-01-202-16/+18
| | | | | | | | | | | | | | | | | | | | The CHIRONSS has its own local PRCM module and the register defines need to use the CHIRONSS base and not the PRM base. The changes are generated by updating the script which autogenerates the file modifed in the patch. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* | OMAP3: clock: Remove unnecessarily .init initializers from OMAP3 clocksRussell King2010-01-191-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | The first thing that omap2_init_clksel_parent() does is check for a non-zero .clksel field in the struct clk. Therefore, it is pointless calling this function on clocks where the clksel field is unset. Remove init calls to omap2_init_clksel_parent() on clocks without a clksel field. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* | OMAP3: hwmod: Adding flag to prevent caching of sysconfig register.Thara Gopinath2010-01-192-1/+3
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the current implementation the sysconfig value is read into _sysc_cache once and an actual update to the sysconfig register happens only if the new value paased is differnt from the one in _sysc_cache. _sysc_cache is updated only if _HWMOD_SYSCONFIG_LOADED is not set. This can lead to the follwing issue if off mode is enabled in modules which employs "always-retore" mechanism of context save and restore. a. The module sets the sysconfig register through omap_device_enable. Here _sysc_cache is updated with the value written to the sysconfig register and left. b. The power domain containig the module enters off mode and the module context is lost. c. The module in use becomes active and calls omap_device_enable to enable itself. Here a read of sysconfig register does not happen as _HWMOD_SYSCONFIG_LOADED flag is set. The value to be written to the sysconfig register will be same as the one written in step a. Since _sysc_cache reflects the previous written value an update of the sysconfig register does not happen. This means in modules which employs "always-restore" mechanism after off , the sysconfig regsiters will never get updated. This patch introduces a flag SYSC_NO_CACHE which if set ensures that the sysconfig register is always read into _sysc_cache before an update is attempted. This flags need to be set only by modules which does not do a context save but re-initializes the registers every time the module is accessed. This includes modules like i2c, smartreflex etc. Signed-off-by: Thara Gopinath <thara@ti.com> [paul@pwsan.com: tweaked to apply on a different head, added flag comment] Signed-off-by: Paul Walmsley <paul@pwsan.com>
* Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2010-01-1229-54/+181
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: ARM: Ensure ARMv6/7 mm files are built using appropriate assembler options ARM: Fix wrong dmb ARM: 5874/1: serial21285: fix disable_irq-from-interrupt-handler deadlock ARM: 5873/1: ARM: Fix the reset logic for ARM RealView boards ARM: 5872/1: ARM: include needed linux/cpu.h in asm/cpu.h ARM: 5871/1: arch/arm: Fix build failure for lpd7a404_defconfig caused by missing includes ARM: 5870/1: arch/arm: Fix build failure for defconfigs without CONFIG_ISA_DMA_API set ARM: 5868/1: ARM: fix "BUG: using smp_processor_id() in preemptible code" ARM: 5867/1: Update U300 defconfig ARM: 5866/1: arm ptrace: use unsigned types for kernel pt_regs [ARM] pxa: fix strange characters in zaurus gpio .desc ARM: add missing recvmmsg syscall number [ARM] pxa: fix compiler warnings of unused variable 'id' in cpu_is_pxa9*() [ARM] pxa: update pwm_backlight->notify() to include missed 'struct device *' [ARM] pxa: enable L2 if present in XSC3 [ARM] pxa: do not enable L2 after MMU is enabled
| * ARM: Ensure ARMv6/7 mm files are built using appropriate assembler optionsRussell King2010-01-121-0/+12
| | | | | | | | | | | | | | | | A kernel with both ARMv6 and ARMv7 selected results in build errors. Fix this by specifying the proper architectures for these assembly files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * ARM: Fix wrong dmbRussell King2010-01-121-3/+1
| | | | | | | | | | | | | | | | | | | | The __kuser_cmpxchg code uses an ARMv6 dmb instruction, rather than one based upon the architecture being built for. Switch to using the macro provided for this purpose, which also eliminates the need for an ifdef. Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * ARM: 5873/1: ARM: Fix the reset logic for ARM RealView boardsColin Tuckley2010-01-117-15/+57
| | | | | | | | | | | | | | | | | | | | Extend the patch from Philby John to the other "RealView" boards. Rename the constants and offsets to reflect their actual functions. Cc: Philby John <pjohn@in.mvista.com> Signed-off-by: Colin Tuckley <colin.tuckley@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * ARM: 5872/1: ARM: include needed linux/cpu.h in asm/cpu.hSantosh Shilimkar2010-01-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The file arch/arm/include/asm/cpu.h needs to include 'linux/cpu.h' to meet its dependency. Otherwise when using "struct cpuinfo_arm" and including just 'asm/cpu.h' throws below error - arch/arm/include/asm/cpu.h:16: error: field 'cpu' has incomplete type To fix this otherway, one can also include both linux/cpu.h and asm/cpu.h but it shoudn't be that way. So this patch fixes this by including the linux/cpu.h in asm/cpu.h, so that including alone asm/cpu.h is enough. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * ARM: 5871/1: arch/arm: Fix build failure for lpd7a404_defconfig caused by ↵Peter Hüwe2010-01-101-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | missing includes This patch fixes a build failure [1] due to missing includes This should make the arm tree build again with lpd7a404_defconfig References: http://kisskb.ellerman.id.au/kisskb/buildresult/1983329/ Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * ARM: 5870/1: arch/arm: Fix build failure for defconfigs without ↵Peter Hüwe2010-01-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_ISA_DMA_API set A lot of ARM-defconfigs (those without CONFIG_ISA_DMA_API set) fail to build [1][2][3] due to the changes of the patch [PATCH] PCI: Clean up build for CONFIG_PCI_QUIRKS unset by Rafael J. Wysocki (Sat, 2 Jan 2010 22:57:24 +0100) [4] as the referenced variable 'isa_dma_bridge_buggy' in asm/dma.h is enclosed by the CONFIG_ISA_DMA_API conditional all configs without this setting fail to build. I'm not sure wether moving the condition is the right way to solve the issue, but atleast it fixes the issue :) References: [1] http://kisskb.ellerman.id.au/kisskb/buildresult/1983354/ [2] http://kisskb.ellerman.id.au/kisskb/buildresult/1983333/ [3] http://kisskb.ellerman.id.au/kisskb/buildresult/1983337/ [4] http://lkml.org/lkml/2010/1/2/102 Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * Merge branch 'fix' of ↵Russell King2010-01-0813-23/+26
| |\ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
| | * [ARM] pxa: fix strange characters in zaurus gpio .descCyril Hrubis2010-01-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Somehow, strange characters made their way zaurus gpio .desc fields. Fix it. Signed-off-by: Pavel Machek <pavel@ucw.cz> Acked-by: Stanislav Brabec <utx@penguin.cz> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
| | * [ARM] pxa: fix compiler warnings of unused variable 'id' in cpu_is_pxa9*()Eric Miao2010-01-041-6/+3
| | | | | | | | | | | | Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
| | * [ARM] pxa: update pwm_backlight->notify() to include missed 'struct device *'Eric Miao2010-01-049-9/+9
| | | | | | | | | | | | Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
| | * [ARM] pxa: enable L2 if present in XSC3Haojian Zhuang2010-01-011-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Check whether L2 is present or not in XSC3. If it's present, enable L2 immediately. Disabling L2 after L2 is enabled that would result in unpredicatable behavior of XSC3 processor. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
| | * [ARM] pxa: do not enable L2 after MMU is enabledHaojian Zhuang2010-01-011-6/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Outer cache checked whether L2 is enabled or not. If L2 isn't enabled in XSC3, it would enable L2. This operation is evil that would make system hang. In XSC3 core document, these words are mentioned in below. "Following reset, the L2 Unified Cache Enable bit is cleared. To enable the L2 Cache, software may set the bit to a '1' before or at the same time as enabling the MMU. Enabling the L2 Cache after the MMU has been enabled or disabling the L2 Cache after the L2 Cache has been enabled, may result in unpredictable behavior of the processor." When outer cache is initialized, the MMU is already enabled. We couldn't enable L2 after MMU enabled. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
| * | ARM: 5868/1: ARM: fix "BUG: using smp_processor_id() in preemptible code"Rabin Vincent2010-01-081-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the following warning, which appears when the register dump for a faulting process is printed in a kernel with SMP, DEBUG_PREEMPT, and DEBUG_USER (with user_debug=31) enabled: BUG: using smp_processor_id() in preemptible [00000000] code: init/1 caller is __show_regs+0x18/0x234 Backtrace: [<c0159e5c>] (dump_backtrace+0x0/0x114) from [<c01faf30>] (dump_stack+0x18/0x1c) r6:c781a000 r5:c0157544 r4:00000001 r3:00000000 [<c01faf18>] (dump_stack+0x0/0x1c) from [<c01e5230>] (debug_smp_processor_id+0xc4/0xf8) [<c01e516c>] (debug_smp_processor_id+0x0/0xf8) from [<c0157544>] (__show_regs+0x18/0x234) r6:c781bfb0 r5:00000000 r4:c781bfb0 r3:00000000 [<c015752c>] (__show_regs+0x0/0x234) from [<c01577a0>] (show_regs+0x40/0x50) [<c0157760>] (show_regs+0x0/0x50) from [<c015c968>] (__do_user_fault+0x5c/0xa4) r4:c781c000 r3:00000000 [<c015c90c>] (__do_user_fault+0x0/0xa4) from [<c015cbe0>] (do_page_fault+0x1b4/0x1e4) r7:00000000 r6:00010000 r5:c781bfb0 r4:c781c000 [<c015ca2c>] (do_page_fault+0x0/0x1e4) from [<c01554c8>] (do_DataAbort+0x3c/0xa0) [<c015548c>] (do_DataAbort+0x0/0xa0) from [<c01560c4>] (ret_from_exception+0x0/0x10) Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | ARM: 5867/1: Update U300 defconfigLinus Walleij2010-01-081-10/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | This updates the U300 defconfig to include the DMA driver merged in 2.6.33-rc1 and adds a codepage that's needed to mount VFAT MMC cards as default. The rest is new config options. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | ARM: 5866/1: arm ptrace: use unsigned types for kernel pt_regsJamie Iles2010-01-081-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make registers unsigned for kernel space. This is important for example in the perf events where the PC is stored into a u64. We don't want it sign extended so make the regs unsigned to prevent casts throughout the kernel. Signed-off-by: Jamie Iles <jamie.iles@picochip.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | ARM: add missing recvmmsg syscall numberRussell King2010-01-071-0/+1
| | | | | | | | | | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds2010-01-1225-354/+134
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (22 commits) MIPS: Ignore vmlinux.* MIPS: Move vmlinux.ecoff to arch/mips/boot MIPS: cpumask_of_node() should handle -1 as a node MIPS: Octeon: Use non-overflowing arithmetic in sched_clock MIPS: Malta, PowerTV: Remove unnecessary "Linux started" MIPS: BCM63xx: Remove duplicate CONFIG_CMDLINE. MIPS: AR7: Remove unused prom_getchar() MIPS: PowerTV: Remove extra r4k_clockevent_init() call MIPS: Cobalt use strlcat() for the command line arguments MIPS: Octeon: Add sched_clock() to csrc-octeon.c MIPS: TXx9: Cleanup builtin-cmdline processing MIPS: PowerTV: simplify prom_init_cmdline() and merge into prom_init() MIPS: PowerTV: Remove unused platform_die() MIPS: PowerTV: Remove mips_machine_halt() MIPS: PowerTV: Remove unused ptv_memsize MIPS: PowerTV: Remove unused prom_getcmdline() MIPS: AR7: Remove kgdb_enabled MIPS: Alchemy: Correct code taking the size of a pointer MIPS: BCM63xx: Fix whitespace damaged board_bcm963xx.c MIPS: VR41xx: Use strlcat() for the command line arguments ...
| * | | MIPS: Ignore vmlinux.*Yoichi Yuasa2010-01-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/795/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | | MIPS: Move vmlinux.ecoff to arch/mips/bootYoichi Yuasa2010-01-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It moves to the same directory as the boot files in other formats. Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/796/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | | MIPS: cpumask_of_node() should handle -1 as a nodeAnton Blanchard2010-01-121-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pcibus_to_node can return -1 if we cannot determine which node a pci bus is on. If passed -1, cpumask_of_node will negatively index the lookup array and pull in random data: # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpus 00000000,00000003,00000000,00000000 # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpulist 64-65 Change cpumask_of_node to check for -1 and return cpu_all_mask in this case: # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpus ffffffff,ffffffff,ffffffff,ffffffff # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpulist 0-127 Signed-off-by: Anton Blanchard <anton@samba.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Patchwork: http://patchwork.linux-mips.org/patch/831/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | | MIPS: Octeon: Use non-overflowing arithmetic in sched_clockDavid Daney2010-01-121-3/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With typical mult and shift values, the calculation for Octeon's sched_clock overflows when using 64-bit arithmetic. Use 128-bit calculations instead. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/849/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | | MIPS: Malta, PowerTV: Remove unnecessary "Linux started"Yoichi Yuasa2010-01-123-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/813/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
OpenPOWER on IntegriCloud