summaryrefslogtreecommitdiffstats
path: root/arch/x86/kernel
Commit message (Collapse)AuthorAgeFilesLines
* x86/irq: Plug vector cleanup raceThomas Gleixner2016-03-031-10/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 98229aa36caa9c769b13565523de9b813013c703 upstream. We still can end up with a stale vector due to the following: CPU0 CPU1 CPU2 lock_vector() data->move_in_progress=0 sendIPI() unlock_vector() set_affinity() assign_irq_vector() lock_vector() handle_IPI move_in_progress = 1 lock_vector() unlock_vector() move_in_progress == 1 So we need to serialize the vector assignment against a pending cleanup. The solution is rather simple now. We not only check for the move_in_progress flag in assign_irq_vector(), we also check whether there is still a cleanup pending in the old_domain cpumask. If so, we return -EBUSY to the caller and let him deal with it. Though we have to be careful in the cpu unplug case. If the cleanout has not yet completed then the following setaffinity() call would return -EBUSY. Add code which prevents this. Full context is here: http://lkml.kernel.org/r/5653B688.4050809@stratus.com Reported-and-tested-by: Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@alien8.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/20151231160107.207265407@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/irq: Call irq_force_move_complete with irq descriptorThomas Gleixner2016-03-032-5/+8
| | | | | | | | | | | | | | | | | | | | commit 90a2282e23f0522e4b3f797ad447c5e91bf7fe32 upstream. First of all there is no point in looking up the irq descriptor again, but we also need the descriptor for the final cleanup race fix in the next patch. Make that change seperate. No functional difference. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/20151231160107.125211743@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/irq: Remove outgoing CPU from vector cleanup maskThomas Gleixner2016-03-031-2/+16
| | | | | | | | | | | | | | | | | | | commit 56d7d2f4bbd00fb198b7907cb3ab657d06115a42 upstream. We want to synchronize new vector assignments with a pending cleanup. Remove a dying cpu from a pending cleanup mask. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/20151231160107.045961667@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/irq: Remove the cpumask allocation from send_cleanup_vector()Thomas Gleixner2016-03-031-13/+3
| | | | | | | | | | | | | | | | | | | | commit 5da0c1217f05d2ccc9a8ed6e6e5c23a8a1d24dd6 upstream. There is no need to allocate a new cpumask for sending the cleanup vector. The old_domain mask is now protected by the vector_lock, so we can safely remove the offline cpus from it and send the IPI with the resulting mask. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/20151231160106.967993932@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/irq: Clear move_in_progress before sending cleanup IPIThomas Gleixner2016-03-031-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit c1684f5035b60e9f98566493e869496fb5de1d89 upstream. send_cleanup_vector() fiddles with the old_domain mask unprotected because it relies on the protection by the move_in_progress flag. But this is fatal, as the flag is reset after the IPI has been sent. So a cpu which receives the IPI can still see the flag set and therefor ignores the cleanup request. If no other cleanup request happens then the vector stays stale on that cpu and in case of an irq removal the vector still persists. That can lead to use after free when the next cleanup IPI happens. Protect the code with vector_lock and clear move_in_progress before sending the IPI. This does not plug the race which Joe reported because: CPU0 CPU1 CPU2 lock_vector() data->move_in_progress=0 sendIPI() unlock_vector() set_affinity() assign_irq_vector() lock_vector() handle_IPI move_in_progress = 1 lock_vector() unlock_vector() move_in_progress == 1 The full fix comes with a later patch. Reported-and-tested-by: Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@alien8.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/20151231160106.892412198@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/irq: Remove offline cpus from vector cleanupThomas Gleixner2016-03-031-2/+6
| | | | | | | | | | | | | | | | | | commit 847667ef10356b824a11c853fc8a8b1b437b6a8d upstream. No point of keeping offline cpus in the cleanup mask. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/20151231160106.808642683@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/irq: Get rid of code duplicationThomas Gleixner2016-03-031-18/+15
| | | | | | | | | | | | | | | | | | | | | commit ab25ac02148b600e645f77cfb8b8ea415ed75bb4 upstream. Reusing an existing vector and assigning a new vector has duplicated code. Consolidate it. This is also a preparatory patch for finally plugging the cleanup race. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/20151231160106.721599216@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/irq: Copy vectormask instead of an AND operationThomas Gleixner2016-03-031-1/+1
| | | | | | | | | | | | | | | | | | | | | commit 9ac15b7a8af4cf3337a101498c0ed690d23ade75 upstream. In the case that the new vector mask is a subset of the existing mask there is no point to do a AND operation of currentmask & newmask. The result is newmask. So we can simply copy the new mask to the current mask and be done with it. Preparatory patch for further consolidation. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/20151231160106.640253454@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/irq: Check vector allocation earlyThomas Gleixner2016-03-031-13/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 3716fd27a604d61a91cda47083504971486b80f1 upstream. __assign_irq_vector() uses the vector_cpumask which is assigned by apic->vector_allocation_domain() without doing basic sanity checks. That can result in a situation where the final assignement of a newly found vector fails in apic->cpu_mask_to_apicid_and(). So we have to do rollbacks for no reason. apic->cpu_mask_to_apicid_and() only fails if vector_cpumask & requested_cpumask & cpu_online_mask is empty. Check for this condition right away and if the result is empty try immediately the next possible cpu in the requested mask. So in case of a failure the old setting is unchanged and we can remove the rollback code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/20151231160106.561877324@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/irq: Reorganize the search in assign_irq_vectorThomas Gleixner2016-03-031-8/+16
| | | | | | | | | | | | | | | | | | | | | | commit 95ffeb4b5baca266e1d0d2bc90f1513e6f419cdd upstream. Split out the code which advances the target cpu for the search so we can reuse it for the next patch which adds an early validation check for the vectormask which we get from the apic. Add comments while at it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/20151231160106.484562040@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/irq: Reorganize the return path in assign_irq_vectorThomas Gleixner2016-03-031-14/+8
| | | | | | | | | | | | | | | | | | | | | commit 433cbd57d190a1cdd02f243df41c3d7f55ec4b94 upstream. Use an explicit goto for the cases where we have success in the search/update and return -ENOSPC if the search loop ends due to no space. Preparatory patch for fixes. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/20151231160106.403491024@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/irq: Do not use apic_chip_data.old_domain as temporary bufferJiang Liu2016-03-031-3/+5
| | | | | | | | | | | | | | | | | | | | | | | commit 8a580f70f6936ec095da217018cdeeb5835c0207 upstream. Function __assign_irq_vector() makes use of apic_chip_data.old_domain as a temporary buffer, which is in the way of using apic_chip_data.old_domain for synchronizing the vector cleanup with the vector assignement code. Use a proper temporary cpumask for this. [ tglx: Renamed the mask to searched_cpumask for clarity ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/1450880014-11741-1-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/irq: Validate that irq descriptor is still activeThomas Gleixner2016-03-031-0/+9
| | | | | | | | | | | | | | | | | | | | commit 36f34c8c63da3e272fd66f91089228c22d2b6e8b upstream. In fixup_irqs() we unconditionally dereference the irq chip of an irq descriptor. The descriptor might still be valid, but already cleaned up, i.e. the chip removed. Add a check for this condition. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/20151231160106.236423282@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/irq: Fix a race in x86_vector_free_irqs()Jiang Liu2016-03-031-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 111abeba67e0dbdc26537429de9155e4f1d807d8 upstream. There's a race condition between x86_vector_free_irqs() { free_apic_chip_data(irq_data->chip_data); xxxxx //irq_data->chip_data has been freed, but the pointer //hasn't been reset yet irq_domain_reset_irq_data(irq_data); } and smp_irq_move_cleanup_interrupt() { raw_spin_lock(&vector_lock); data = apic_chip_data(irq_desc_get_irq_data(desc)); access data->xxxx // may access freed memory raw_spin_unlock(&desc->lock); } which may cause smp_irq_move_cleanup_interrupt() to access freed memory. Call irq_domain_reset_irq_data(), which clears the pointer with vector lock held. [ tglx: Free memory outside of lock held region. ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/1450880014-11741-3-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/irq: Call chip->irq_set_affinity in proper contextThomas Gleixner2016-03-031-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit e23b257c293ce4bcc8cabb2aa3097b6ed8a8261a upstream. setup_ioapic_dest() calls irqchip->irq_set_affinity() completely unprotected. That's wrong in several aspects: - it opens a race window where irq_set_affinity() can be interrupted and the irq chip left in unconsistent state. - it triggers a lockdep splat when we fix the vector race for 4.3+ because vector lock is taken with interrupts enabled. The proper calling convention is irq descriptor lock held and interrupts disabled. Reported-and-tested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Cc: Joe Lawrence <joe.lawrence@stratus.com> Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1601140919420.3575@nanos Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/reboot/quirks: Add iMac10,1 to pci_reboot_dmi_table[]Mario Kleiner2016-01-311-0/+8
| | | | | | | | | | | | | | | | | | | | | | | commit 2f0c0b2d96b1205efb14347009748d786c2d9ba5 upstream. Without the reboot=pci method, the iMac 10,1 simply hangs after printing "Restarting system" at the point when it should reboot. This fixes it. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1450466646-26663-1-git-send-email-mario.kleiner.de@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/numachip: Fix NumaConnect2 MMCFG PCI accessDaniel J Blueman2015-12-301-4/+1
| | | | | | | | | | | | | | | The MMCFG PCI accessors weren't being setup for NumacConnect2 correctly due to over-early assignment; this would create the potential for the wrong PCI domain to be accessed. Fix this by using the correct arch-specific PCI init function. Signed-off-by: Daniel J Blueman <daniel@numascale.com> Acked-by: Steffen Persvold <sp@numascale.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1451498807-15920-1-git-send-email-daniel@numascale.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86/paravirt: Prevent rtc_cmos platform device init on PV guestsDavid Vrabel2015-12-191-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding the rtc platform device in non-privileged Xen PV guests causes an IRQ conflict because these guests do not have legacy PIC and may allocate irqs in the legacy range. In a single VCPU Xen PV guest we should have: /proc/interrupts: CPU0 0: 4934 xen-percpu-virq timer0 1: 0 xen-percpu-ipi spinlock0 2: 0 xen-percpu-ipi resched0 3: 0 xen-percpu-ipi callfunc0 4: 0 xen-percpu-virq debug0 5: 0 xen-percpu-ipi callfuncsingle0 6: 0 xen-percpu-ipi irqwork0 7: 321 xen-dyn-event xenbus 8: 90 xen-dyn-event hvc_console ... But hvc_console cannot get its interrupt because it is already in use by rtc0 and the console does not work. genirq: Flags mismatch irq 8. 00000000 (hvc_console) vs. 00000000 (rtc0) We can avoid this problem by realizing that unprivileged PV guests (both Xen and lguests) are not supposed to have rtc_cmos device and so adding it is not necessary. Privileged guests (i.e. Xen's dom0) do use it but they should not have irq conflicts since they allocate irqs above legacy range (above gsi_top, in fact). Instead of explicitly testing whether the guest is privileged we can extend pv_info structure to include information about guest's RTC support. Reported-and-tested-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: vkuznets@redhat.com Cc: xen-devel@lists.xenproject.org Cc: konrad.wilk@oracle.com Cc: stable@vger.kernel.org # 4.2+ Link: http://lkml.kernel.org/r/1449842873-2613-1-git-send-email-boris.ostrovsky@oracle.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86/mce: Ensure offline CPUs don't participate in rendezvous processAshok Raj2015-12-191-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Intel's MCA implementation broadcasts MCEs to all CPUs on the node. This poses a problem for offlined CPUs which cannot participate in the rendezvous process: Kernel panic - not syncing: Timeout: Not all CPUs entered broadcast exception handler Kernel Offset: disabled Rebooting in 100 seconds.. More specifically, Linux does a soft offline of a CPU when writing a 0 to /sys/devices/system/cpu/cpuX/online, which doesn't prevent the #MC exception from being broadcasted to that CPU. Ensure that offline CPUs don't participate in the MCE rendezvous and clear the RIP valid status bit so that a second MCE won't cause a shutdown. Without the patch, mce_start() will increment mce_callin and wait for all CPUs. Offlined CPUs should avoid participating in the rendezvous process altogether. Signed-off-by: Ashok Raj <ashok.raj@intel.com> [ Massage commit message. ] Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Cc: <stable@vger.kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1449742346-21470-2-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds2015-12-086-7/+10
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "This tree includes four core perf fixes for misc bugs, three fixes to x86 PMU drivers, and two updates to old email addresses" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Do not send exit event twice perf/x86/intel: Fix INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_NA macro perf/x86/intel: Make L1D_PEND_MISS.FB_FULL not constrained on Haswell perf: Fix PERF_EVENT_IOC_PERIOD deadlock treewide: Remove old email address perf/x86: Fix LBR call stack save/restore perf: Update email address in MAINTAINERS perf/core: Robustify the perf_cgroup_from_task() RCU checks perf/core: Fix RCU problem with cgroup context switching code
| * perf/x86/intel: Fix INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_NA macroJiri Olsa2015-12-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to add rest of the flags to the constraint mask instead of another INTEL_ARCH_EVENT_MASK, fixing a typo. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1447061071-28085-1-git-send-email-jolsa@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * perf/x86/intel: Make L1D_PEND_MISS.FB_FULL not constrained on HaswellYuanfang Chen2015-12-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There was a mistake in the Haswell constraints table. Signed-off-by: Yuanfang Chen <cheny@udel.edu> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Andi Kleen <ak@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1448384701-9110-1-git-send-email-cheny@udel.edu Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * treewide: Remove old email addressPeter Zijlstra2015-11-233-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There were still a number of references to my old Red Hat email address in the kernel source. Remove these while keeping the Red Hat copyright notices intact. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * perf/x86: Fix LBR call stack save/restoreAndi Kleen2015-11-232-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a bug I added in the following commit: 90405aa02247 ("perf/x86/intel/lbr: Limit LBR accesses to TOS in callstack mode") The bug could lead to lost LBR call stacks. When restoring the LBR state we need to use the TOS of the previous context, not the current context. To do that we need to save/restore the TOS. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: acme@kernel.org Cc: jolsa@kernel.org Link: http://lkml.kernel.org/r/1445366797-30894-1-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * perf/core: Robustify the perf_cgroup_from_task() RCU checksStephane Eranian2015-11-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch reinforces the lockdep checks performed by perf_cgroup_from_tsk() by passing the perf_event_context whenever possible. It is okay to not hold the RCU read lock when we know we hold the ctx->lock. This patch makes sure this property holds. In some functions, such as perf_cgroup_sched_in(), we do not pass the context because we are sure we are holding the RCU read lock. Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: edumazet@google.com Link: http://lkml.kernel.org/r/1447322404-10920-3-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds2015-12-064-13/+16
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thoma Gleixner: "Another round of fixes for x86: - Move the initialization of the microcode driver to late_initcall to make sure everything that init function needs is available. - Make sure that lockdep knows about interrupts being off in the entry code before calling into c-code. - Undo the cpu hotplug init delay regression. - Use the proper conditionals in the mpx instruction decoder. - Fixup restart_syscall for x32 tasks. - Fix the hugepage regression on PAE kernels which was introduced with the latest PAT changes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/signal: Fix restart_syscall number for x32 tasks x86/mpx: Fix instruction decoder condition x86/mm: Fix regression with huge pages on PAE x86 smpboot: Re-enable init_udelay=0 by default on modern CPUs x86/entry/64: Fix irqflag tracing wrt context tracking x86/microcode: Initialize the driver late when facilities are up
| * | x86/signal: Fix restart_syscall number for x32 tasksDmitry V. Levin2015-12-051-7/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When restarting a syscall with regs->ax == -ERESTART_RESTARTBLOCK, regs->ax is assigned to a restart_syscall number. For x32 tasks, this syscall number must have __X32_SYSCALL_BIT set, otherwise it will be an x86_64 syscall number instead of a valid x32 syscall number. This issue has been there since the introduction of x32. Reported-by: strace/tests/restart_syscall.test Reported-and-tested-by: Elvira Khabirova <lineprinter0@gmail.com> Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Cc: Elvira Khabirova <lineprinter0@gmail.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20151130215436.GA25996@altlinux.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| * | x86 smpboot: Re-enable init_udelay=0 by default on modern CPUsLen Brown2015-11-251-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit f1ccd249319e allowed the cmdline "cpu_init_udelay=" to work with all values, including the default of 10000. But in setting the default of 10000, it over-rode the code that sets the delay 0 on modern processors. Also, tidy up use of INT/UINT. Fixes: f1ccd249319e "x86/smpboot: Fix cpu_init_udelay=10000 corner case boot parameter misbehavior" Reported-by: Shane <shrybman@teksavvy.com> Signed-off-by: Len Brown <len.brown@intel.com> Cc: dparsons@brightdsl.net Cc: stable@kernel.org Link: http://lkml.kernel.org/r/9082eb809ef40dad02db714759c7aaf618c518d4.1448232494.git.len.brown@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| * | x86/microcode: Initialize the driver late when facilities are upBorislav Petkov2015-11-232-2/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Running microcode_init() from setup_arch() is a bad idea because not even kmalloc() is ready at that point and the loader does all kinds of allocations and init/registration with various subsystems. Make it a late initcall when required facilities are initialized so that the microcode driver initialization can succeed too. Reported-and-tested-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20151120112400.GC4028@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
* / libnvdimm, e820: skip module loading when no type-12Dan Williams2015-11-301-0/+12
|/ | | | | | | | | | If there are no persistent memory ranges present then don't bother creating the platform device. Otherwise, it loads the full libnvdimm sub-system only to discover no resources present. Reported-by: Andy Lutomirski <luto@amacapital.net> Acked-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds2015-11-224-9/+12
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "This update contains: - MPX updates for handling 32bit processes - A fix for a long standing bug in 32bit signal frame handling related to FPU/XSAVE state - Handle get_xsave_addr() correctly in KVM - Fix SMAP check under paravirtualization - Add a comment to the static function trace entry to avoid further confusion about the difference to dynamic tracing" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Fix SMAP check in PVOPS environments x86/ftrace: Add comment on static function tracing x86/fpu: Fix get_xsave_addr() behavior under virtualization x86/fpu: Fix 32-bit signal frame handling x86/mpx: Fix 32-bit address space calculation x86/mpx: Do proper get_user() when running 32-bit binaries on 64-bit kernels
| * x86/cpu: Fix SMAP check in PVOPS environmentsAndrew Cooper2015-11-191-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There appears to be no formal statement of what pv_irq_ops.save_fl() is supposed to return precisely. Native returns the full flags, while lguest and Xen only return the Interrupt Flag, and both have comments by the implementations stating that only the Interrupt Flag is looked at. This may have been true when initially implemented, but no longer is. To make matters worse, the Xen PVOP leaves the upper bits undefined, making the BUG_ON() undefined behaviour. Experimentally, this now trips for 32bit PV guests on Broadwell hardware. The BUG_ON() is consistent for an individual build, but not consistent for all builds. It has also been a sitting timebomb since SMAP support was introduced. Use native_save_fl() instead, which will obtain an accurate view of the AC flag. Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Tested-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: <lguest@lists.ozlabs.org> Cc: Xen-devel <xen-devel@lists.xen.org> CC: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1433323874-6927-1-git-send-email-andrew.cooper3@citrix.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| * x86/ftrace: Add comment on static function tracingNamhyung Kim2015-11-191-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | There was a confusion between update_ftrace_function() and static function tracing trampoline regarding 3rd parameter (ftrace_ops). Add a comment for clarification. Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1447721004-2551-1-git-send-email-namhyung@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| * x86/fpu: Fix get_xsave_addr() behavior under virtualizationHuaitong Han2015-11-121-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | KVM uses the get_xsave_addr() function in a different fashion from the native kernel, in that the 'xsave' parameter belongs to guest vcpu, not the currently running task. But 'xsave' is replaced with current task's (host) xsave structure, so get_xsave_addr() will incorrectly return the bad xsave address to KVM. Fix it so that the passed in 'xsave' address is used - as intended originally. Signed-off-by: Huaitong Han <huaitong.han@intel.com> Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: <stable@vger.kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave.hansen@intel.com Link: http://lkml.kernel.org/r/1446800423-21622-1-git-send-email-huaitong.han@intel.com [ Tidied up the changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * x86/fpu: Fix 32-bit signal frame handlingDave Hansen2015-11-121-6/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (This should have gone to LKML originally. Sorry for the extra noise, folks on the cc.) Background: Signal frames on x86 have two formats: 1. For 32-bit executables (whether on a real 32-bit kernel or under 32-bit emulation on a 64-bit kernel) we have a 'fpregset_t' that includes the "FSAVE" registers. 2. For 64-bit executables (on 64-bit kernels obviously), the 'fpregset_t' is smaller and does not contain the "FSAVE" state. When creating the signal frame, we have to be aware of whether we are running a 32 or 64-bit executable so we create the correct format signal frame. Problem: save_xstate_epilog() uses 'fx_sw_reserved_ia32' whenever it is called for a 32-bit executable. This is for real 32-bit and ia32 emulation. But, fpu__init_prepare_fx_sw_frame() only initializes 'fx_sw_reserved_ia32' when emulation is enabled, *NOT* for real 32-bit kernels. This leads to really wierd situations where 32-bit programs lose their extended state when returning from a signal handler. The kernel copies the uninitialized (zero) 'fx_sw_reserved_ia32' out to userspace in save_xstate_epilog(). But when returning from the signal, the kernel errors out in check_for_xstate() when it does not see FP_XSTATE_MAGIC1 present (because it was zeroed). This leads to the FPU/XSAVE state being initialized. For MPX, this leads to the most permissive state and means we silently lose bounds violations. I think this would also mean that we could lose *ANY* FPU/SSE/AVX state. I'm not sure why no one has spotted this bug. I believe this was broken by: 72a671ced66d ("x86, fpu: Unify signal handling code paths for x86 and x86_64 kernels") way back in 2012. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: <stable@vger.kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave@sr71.net Cc: fenghua.yu@intel.com Cc: yu-cheng.yu@intel.com Link: http://lkml.kernel.org/r/20151111002354.A0799571@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds2015-11-151-6/+0
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Thomas Gleixner: "Mostly updates to the perf tool plus two fixes to the kernel core code: - Handle tracepoint filters correctly for inherited events (Peter Zijlstra) - Prevent a deadlock in perf_lock_task_context (Paul McKenney) - Add missing newlines to some pr_err() calls (Arnaldo Carvalho de Melo) - Print full source file paths when using 'perf annotate --print-line --full-paths' (Michael Petlan) - Fix 'perf probe -d' when just one out of uprobes and kprobes is enabled (Wang Nan) - Add compiler.h to list.h to fix 'make perf-tar-src-pkg' generated tarballs, i.e. out of tree building (Arnaldo Carvalho de Melo) - Add the llvm-src-base.c and llvm-src-kbuild.c files, generated by the 'perf test' LLVM entries, when running it in-tree, to .gitignore (Yunlong Song) - libbpf error reporting improvements, using a strerror interface to more precisely tell the user about problems with the provided scriptlet, be it in C or as a ready made object file (Wang Nan) - Do not be case sensitive when searching for matching 'perf test' entries (Arnaldo Carvalho de Melo) - Inform the user about objdump failures in 'perf annotate' (Andi Kleen) - Improve the LLVM 'perf test' entry, introduce a new ones for BPF and kbuild tests to check the environment used by clang to compile .c scriptlets (Wang Nan)" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits) perf/x86/intel/rapl: Remove the unused RAPL_EVENT_DESC() macro tools include: Add compiler.h to list.h perf probe: Verify parameters in two functions perf session: Add missing newlines to some pr_err() calls perf annotate: Support full source file paths for srcline fix perf test: Add llvm-src-base.c and llvm-src-kbuild.c to .gitignore perf: Fix inherited events vs. tracepoint filters perf: Disable IRQs across RCU RS CS that acquires scheduler lock perf test: Do not be case sensitive when searching for matching tests perf test: Add 'perf test BPF' perf test: Enhance the LLVM tests: add kbuild test perf test: Enhance the LLVM test: update basic BPF test program perf bpf: Improve BPF related error messages perf tools: Make fetch_kernel_version() publicly available bpf tools: Add new API bpf_object__get_kversion() bpf tools: Improve libbpf error reporting perf probe: Cleanup find_perf_probe_point_from_map to reduce redundancy perf annotate: Inform the user about objdump failures in --stdio perf stat: Make stat options global perf sched latency: Fix thread pid reuse issue ...
| * | perf/x86/intel/rapl: Remove the unused RAPL_EVENT_DESC() macroHuang Rui2015-11-121-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Huang Rui <ray.huang@amd.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Li <tony.li@amd.com> Link: http://lkml.kernel.org/r/1446630233-3166-1-git-send-email-ray.huang@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | | Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds2015-11-157-15/+56
|\ \ \ | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A couple of fixes and updates related to x86: - Fix the W+X check regression on XEN - The real fix for the low identity map trainwreck - Probe legacy PIC early instead of unconditionally allocating legacy irqs - Add cpu verification to long mode entry - Adjust the cache topology to AMD Fam17H systems - Let Merrifield use the TSC across S3" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Call verify_cpu() after having entered long mode too x86/setup: Fix low identity map for >= 2GB kernel range x86/mm: Skip the hypervisor range when walking PGD x86/AMD: Fix last level cache topology for AMD Fam17h systems x86/irq: Probe for PIC presence before allocating descs for legacy IRQs x86/cpu/intel: Enable X86_FEATURE_NONSTOP_TSC_S3 for Merrifield
| * | x86/cpu: Call verify_cpu() after having entered long mode tooBorislav Petkov2015-11-072-5/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we get loaded by a 64-bit bootloader, kernel entry point is startup_64 in head_64.S. We don't trust any and all bootloaders because some will fiddle with CPU configuration so we go ahead and massage each CPU into sanity again. For example, some dell BIOSes have this XD disable feature which set IA32_MISC_ENABLE[34] and disable NX. This might be some dumb workaround for other OSes but Linux sure doesn't need it. A similar thing is present in the Surface 3 firmware - see https://bugzilla.kernel.org/show_bug.cgi?id=106051 - which sets this bit only on the BSP: # rdmsr -a 0x1a0 400850089 850089 850089 850089 I know, right?! There's not even an off switch in there. So fix all those cases by sanitizing the 64-bit entry point too. For that, make verify_cpu() callable in 64-bit mode also. Requested-and-debugged-by: "H. Peter Anvin" <hpa@zytor.com> Reported-and-tested-by: Bastien Nocera <bugzilla@hadess.net> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1446739076-21303-1-git-send-email-bp@alien8.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| * | x86/setup: Fix low identity map for >= 2GB kernel rangeKrzysztof Mazur2015-11-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit f5f3497cad8c extended the low identity mapping. However, if the kernel uses more than 2 GB (VMSPLIT_2G_OPT or VMSPLIT_1G memory split), the normal memory mapping is overwritten by the low identity mapping causing a crash. To avoid overwritting, limit the low identity map to cover only memory before kernel range (PAGE_OFFSET). Fixes: f5f3497cad8c "x86/setup: Extend low identity map to cover whole kernel range Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1446815916-22105-1-git-send-email-krzysiek@podlesie.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| * | x86/AMD: Fix last level cache topology for AMD Fam17h systemsAravind Gopalakrishnan2015-11-071-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On AMD Fam17h systems, the last level cache is not resident in the northbridge. Therefore, we cannot assign cpu_llc_id to the same value as Node ID as we have been doing until now. We should rather look at the ApicID bits of the core to provide us the last level cache ID info. Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jacob Shin <jacob.w.shin@gmail.com> Link: http://lkml.kernel.org/r/1446582899-9378-1-git-send-email-Aravind.Gopalakrishnan@amd.com Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| * | x86/irq: Probe for PIC presence before allocating descs for legacy IRQsVitaly Kuznetsov2015-11-072-9/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces") brought a regression for Hyper-V Gen2 instances. These instances don't have i8259 legacy PIC but they use legacy IRQs for serial port, rtc, and acpi. With this commit included we end up with these IRQs not initialized. Earlier, there was a special workaround for legacy IRQs in mp_map_pin_to_irq() doing mp_irqdomain_map() without looking at nr_legacy_irqs() and now we fail in __irq_domain_alloc_irqs() when irq_domain_alloc_descs() returns -EEXIST. The essence of the issue seems to be that early_irq_init() calls arch_probe_nr_irqs() to figure out the number of legacy IRQs before we probe for i8259 and gets 16. Later when init_8259A() is called we switch to NULL legacy PIC and nr_legacy_irqs() starts to return 0 but we already have 16 descs allocated. Solve the issue by separating i8259 probe from init and calling it in arch_probe_nr_irqs() before we actually use nr_legacy_irqs() information. Fixes: d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1446543614-3621-1-git-send-email-vkuznets@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| * | x86/cpu/intel: Enable X86_FEATURE_NONSTOP_TSC_S3 for MerrifieldAndy Shevchenko2015-11-071-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | The Intel Merrifield SoC is a successor of the Intel MID line of SoCs. Let's set the neccessary capability for that chip. See commit c54fdbb2823d (x86: Add cpu capability flag X86_FEATURE_NONSTOP_TSC_S3) for the details. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: http://lkml.kernel.org/r/1444319786-36125-1-git-send-email-andriy.shevchenko@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | Merge branch 'akpm' (patches from Andrew)Linus Torvalds2015-11-072-5/+4
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge second patch-bomb from Andrew Morton: - most of the rest of MM - procfs - lib/ updates - printk updates - bitops infrastructure tweaks - checkpatch updates - nilfs2 update - signals - various other misc bits: coredump, seqfile, kexec, pidns, zlib, ipc, dma-debug, dma-mapping, ... * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (102 commits) ipc,msg: drop dst nil validation in copy_msg include/linux/zutil.h: fix usage example of zlib_adler32() panic: release stale console lock to always get the logbuf printed out dma-debug: check nents in dma_sync_sg* dma-mapping: tidy up dma_parms default handling pidns: fix set/getpriority and ioprio_set/get in PRIO_USER mode kexec: use file name as the output message prefix fs, seqfile: always allow oom killer seq_file: reuse string_escape_str() fs/seq_file: use seq_* helpers in seq_hex_dump() coredump: change zap_threads() and zap_process() to use for_each_thread() coredump: ensure all coredumping tasks have SIGNAL_GROUP_COREDUMP signal: remove jffs2_garbage_collect_thread()->allow_signal(SIGCONT) signal: introduce kernel_signal_stop() to fix jffs2_garbage_collect_thread() signal: turn dequeue_signal_lock() into kernel_dequeue_signal() signals: kill block_all_signals() and unblock_all_signals() nilfs2: fix gcc uninitialized-variable warnings in powerpc build nilfs2: fix gcc unused-but-set-variable warnings MAINTAINERS: nilfs2: add header file for tracing nilfs2: add tracepoints for analyzing reading and writing metadata files ...
| * | arch/x86/kernel/cpu/perf_event_msr.c: use sign_extend64() for sign extensionMartin Kepplinger2015-11-061-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: George Spelvin <linux@horizon.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Maxime Coquelin <maxime.coquelin@st.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Yury Norov <yury.norov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | mm, page_alloc: distinguish between being unable to sleep, unwilling to ↵Mel Gorman2015-11-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sleep and avoiding waking kswapd __GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | Merge branch 'for-linus' of ↵Linus Torvalds2015-11-071-4/+5
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching Pull livepatching fix from Jiri Kosina: "A fix for a kernel oops in case CONFIG_DEBUG_SET_MODULE_RONX is unset (as in such case it's possible for module struct to share a page with executable text, which is currently not being handled with grace) from Josh Poimboeuf" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: Fix crash with !CONFIG_DEBUG_SET_MODULE_RONX
| * | | livepatch: Fix crash with !CONFIG_DEBUG_SET_MODULE_RONXJosh Poimboeuf2015-11-061-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When loading a patch module on a kernel with !CONFIG_DEBUG_SET_MODULE_RONX, the following crash occurs: [ 205.988776] livepatch: enabling patch 'kpatch_meminfo_string' [ 205.989829] BUG: unable to handle kernel paging request at ffffffffa08d2fc0 [ 205.989863] IP: [<ffffffff8154fecb>] do_init_module+0x8c/0x1ba [ 205.989888] PGD 1a10067 PUD 1a11063 PMD 7bcde067 PTE 3740e161 [ 205.989915] Oops: 0003 [#1] SMP [ 205.990187] CPU: 2 PID: 14570 Comm: insmod Tainted: G O K 4.1.12 [ 205.990214] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014 [ 205.990249] task: ffff8800374aaa90 ti: ffff8800794b8000 task.ti: ffff8800794b8000 [ 205.990276] RIP: 0010:[<ffffffff8154fecb>] [<ffffffff8154fecb>] do_init_module+0x8c/0x1ba [ 205.990307] RSP: 0018:ffff8800794bbd58 EFLAGS: 00010246 [ 205.990327] RAX: 0000000000000000 RBX: ffffffffa08d2fc0 RCX: 0000000000000000 [ 205.990356] RDX: 01ffff8000000080 RSI: 0000000000000000 RDI: ffffffff81a54b40 [ 205.990382] RBP: ffff88007b4c4d80 R08: 0000000000000007 R09: 0000000000000000 [ 205.990408] R10: 0000000000000008 R11: ffffea0001f18840 R12: 0000000000000000 [ 205.990433] R13: 0000000000000001 R14: ffffffffa08d2fc0 R15: ffff88007bd0bc40 [ 205.990459] FS: 00007f1128fbc700(0000) GS:ffff88007fc80000(0000) knlGS:0000000000000000 [ 205.990488] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 205.990509] CR2: ffffffffa08d2fc0 CR3: 000000002606e000 CR4: 00000000001406e0 [ 205.990536] Stack: [ 205.990545] ffff8800794bbec8 0000000000000001 ffffffffa08d3010 ffffffff810ecea9 [ 205.990576] ffffffff810e8e40 000000000005f360 ffff88007bd0bc50 ffffffffa08d3240 [ 205.990608] ffffffffa08d52c0 ffffffffa08d3210 ffff8800794bbed8 ffff8800794bbf1c [ 205.990639] Call Trace: [ 205.990651] [<ffffffff810ecea9>] ? load_module+0x1e59/0x23a0 [ 205.990672] [<ffffffff810e8e40>] ? store_uevent+0x40/0x40 [ 205.990693] [<ffffffff810e99b5>] ? copy_module_from_fd.isra.49+0xb5/0x140 [ 205.990718] [<ffffffff810ed5bd>] ? SyS_finit_module+0x7d/0xa0 [ 205.990741] [<ffffffff81556832>] ? system_call_fastpath+0x16/0x75 [ 205.990763] Code: f9 00 00 00 74 23 49 c7 c0 92 e1 60 81 48 8d 53 18 89 c1 4c 89 c6 48 c7 c7 f0 85 7d 81 31 c0 e8 71 fa ff ff e8 58 0e 00 00 31 f6 <c7> 03 00 00 00 00 48 89 da 48 c7 c7 20 c7 a5 81 e8 d0 ec b3 ff [ 205.990916] RIP [<ffffffff8154fecb>] do_init_module+0x8c/0x1ba [ 205.990940] RSP <ffff8800794bbd58> [ 205.990953] CR2: ffffffffa08d2fc0 With !CONFIG_DEBUG_SET_MODULE_RONX, module text and rodata pages are writable, and the debug_align() macro allows the module struct to share a page with executable text. When klp_write_module_reloc() calls set_memory_ro() on the page, it effectively turns the module struct into a read-only structure, resulting in a page fault when load_module() does "mod->state = MODULE_STATE_LIVE". Reported-by: Cyril B. <cbay@alwaysdata.com> Tested-by: Cyril B. <cbay@alwaysdata.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | | Merge tag 'trace-v4.4' of ↵Linus Torvalds2015-11-061-0/+4
|\ \ \ \ | |_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracking updates from Steven Rostedt: "Most of the changes are clean ups and small fixes. Some of them have stable tags to them. I searched through my INBOX just as the merge window opened and found lots of patches to pull. I ran them through all my tests and they were in linux-next for a few days. Features added this release: ---------------------------- - Module globbing. You can now filter function tracing to several modules. # echo '*:mod:*snd*' > set_ftrace_filter (Dmitry Safonov) - Tracer specific options are now visible even when the tracer is not active. It was rather annoying that you can only see and modify tracer options after enabling the tracer. Now they are in the options/ directory even when the tracer is not active. Although they are still only visible when the tracer is active in the trace_options file. - Trace options are now per instance (although some of the tracer specific options are global) - New tracefs file: set_event_pid. If any pid is added to this file, then all events in the instance will filter out events that are not part of this pid. sched_switch and sched_wakeup events handle next and the wakee pids" * tag 'trace-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (68 commits) tracefs: Fix refcount imbalance in start_creating() tracing: Put back comma for empty fields in boot string parsing tracing: Apply tracer specific options from kernel command line. tracing: Add some documentation about set_event_pid ring_buffer: Remove unneeded smp_wmb() before wakeup of reader benchmark tracing: Allow dumping traces without tracking trace started cpus ring_buffer: Fix more races when terminating the producer in the benchmark ring_buffer: Do no not complete benchmark reader too early tracing: Remove redundant TP_ARGS redefining tracing: Rename max_stack_lock to stack_trace_max_lock tracing: Allow arch-specific stack tracer recordmcount: arm64: Replace the ignored mcount call into nop recordmcount: Fix endianness handling bug for nop_mcount tracepoints: Fix documentation of RCU lockdep checks tracing: ftrace_event_is_function() can return boolean tracing: is_legal_op() can return boolean ring-buffer: rb_event_is_commit() can return boolean ring-buffer: rb_per_cpu_empty() can return boolean ring_buffer: ring_buffer_empty{cpu}() can return boolean ring-buffer: rb_is_reader_page() can return boolean ...
| * | | ftrace: Calculate the correct dyn_ftrace number to report to the userspaceMinfei Huang2015-10-221-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now, ftrace only calculate the dyn_ftrace number in the adding breakpoint loop, not in adding update and finish update loop. Calculate the correct dyn_ftrace, once ftrace reports the failure message to the userspace. Link: http://lkml.kernel.org/r/1442420382-13130-1-git-send-email-mnfhuang@gmail.com Signed-off-by: Minfei Huang <mnfhuang@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
OpenPOWER on IntegriCloud