summaryrefslogtreecommitdiffstats
path: root/arch/s390/Makefile
Commit message (Collapse)AuthorAgeFilesLines
* s390: remove small stack config optionHeiko Carstens2013-04-261-10/+0
| | | | | | | | | We've seen repeatedly that 8KB stack size on 64 bit kernels is not sufficient. So simply remove the config option. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* s390: use -fPIC for module compileMartin Schwidefsky2013-01-121-2/+2
| | | | | | | | | The xfs module uses a lot of tracepoint, with TRACEPOINTS=y and a few debugging options the GOT table of the xfs module will get bigger than 4K. To get a working xfs module it needs to be compiled with -fPIC instead of -fpic. To play safe use -fPIC for all modules. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* s390: add zEC12 code generation supportHeiko Carstens2012-11-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Allow to generate code that only runs on zEC12 machines. Also add a check which prevents the kernel to run on machines which do not have any of the following new facilities installed: - (48) decimal-floating-point zoned-conversion - (49) execution-hint - (49) load-and-trap - (49) miscellaneous-instruction-extensions - (49) processor-assist - (50) constrained transactional-execution - (73) transactional-execution 48, 49, 50 and 73 are the bit numbers of the facility indications for each of the required facilities. Note that we assume that user-space gets compiled with the same compiler options, therefore we also test for a dfp facility even if the kernel doesn't make use of it. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
* s390: Use generic init_taskThomas Gleixner2012-05-051-1/+0
| | | | | | | | | | | Same code. Use the generic version. The special Makefile treatment is pointless anyway as init_task.o contains only data which is handled by the linker script. So no point on being treated like head text. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Link: http://lkml.kernel.org/r/20120503085035.271439530@linutronix.de
* [S390] cleanup entry point definitionChristian Borntraeger2012-01-181-1/+0
| | | | | | | | | | | | | | | The vmlinux file for s390 contains a currently unused entry point, which is specified in two different locations: the linker script and the makefile. As it happens both definitions are different and the linker file is broken (_start does not exist) and the makefile specifies an entry point which makes no sense (the SALIPL loader entry point). So lets get rid of one definition (the makefile) and use the entry point of all other ipl methods (0x10000 -> startup) to be consistent. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] make arch/s390 subdirectories depend on config optionJan Glauber2011-12-271-1/+0
| | | | | | | | Only add subdirectories of arch/s390 to kbuild if their respective config option is selected. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] remove redundant stack check optionJan Glauber2011-03-151-2/+1
| | | | | | | | | | | | Newer gcc versions offer an architecture-independent option to check the stack size and warn if it reaches a certain limit. This option already existed for s390 by using -mwarn-dynamicstack. Since one stack check option is enough remove the s390 specific stack check but keep the option that warns about dynamic stack usage because that is not covered by the generic option. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] Add config option for z196 code generation.Heiko Carstens2010-10-251-0/+1
| | | | | | | | Add a kernel config option for the IBM zEnterprise 196. This will produce faster code on newer compilers using the -march=z196 option. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] standardize Kbuild rulesHeiko Carstens2010-10-251-2/+2
| | | | | | | | | | | | Introducing this Kbuild file allow us to: make arch/s390/ And thus building all the core part of s390. Same as on other architectures. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Merge commit 'v2.6.35' into kbuild/kbuildMichal Marek2010-08-041-3/+16
|\ | | | | | | | | Conflicts: arch/powerpc/Makefile
| * [S390] vdso: add missing vdso_install targetHendrik Brueckner2010-05-171-0/+6
| | | | | | | | | | | | | | | | | | | | Add missing vdso_install target to install the unstripped vdso images into $(MODLIB)/vdso/. These files are helpful when containing additional debugging information. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * [S390] add support for compressed kernelsMartin Schwidefsky2010-02-261-3/+10
| | | | | | | | | | | | | | | | Add the "bzImage" compile target and the necessary code to generate compressed kernel images. The old style uncompressed "image" target is preserved, a simple make will build them both. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | kbuild: allow assignment to {A,C,LD}FLAGS_MODULE on the command lineSam Ravnborg2010-08-031-1/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is now possible to assign options to AS, CC and LD on the command line - which is only used when building modules. {A,C,LD}FLAGS_MODULE was all used both in the top-level Makefile in the arch makefiles, thus users had no way to specify additional options to AS, CC, LD when building modules without overriding the original value. Introduce a new set of variables KBUILD_{A,C,LD}FLAGS_MODULE that is used by arch specific files and free up {A,C,LD}FLAGS_MODULE so they can be assigned on the command line. All arch Makefiles that used the old variables has been updated. Note: Previously we had a MODFLAGS variable for both AS and CC. But in favour of consistency this was dropped. So in some cases arch Makefile has one assignmnet replaced by two assignmnets. Note2: MODFLAGS was not documented and is dropped without any notice. I do not expect much/any breakage from this. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Chen Liqin <liqin.chen@sunplusct.com> Acked-by: Mike Frysinger <vapier@gentoo.org> [blackfin] Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [avr32] Signed-off-by: Michal Marek <mmarek@suse.cz>
* [S390] hibernation: merge files and move to kernel/Heiko Carstens2009-09-111-2/+1
| | | | | | | | Merge the nearly empty C files and move everything from power/ to kernel/. That way the files are easier to handle. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] s390: hibernation support for s390Hans-Joachim Picht2009-06-161-1/+3
| | | | | | | | | | | This patch introduces the hibernation backend support to the s390 architecture. Now it is possible to suspend a mainframe Linux guest using the following command: echo disk > /sys/power/state Signed-off-by: Hans-Joachim Picht <hans@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] Add processor type march=z10 and a processor type safety check.Martin Schwidefsky2008-12-251-0/+1
| | | | | | | | This patch adds the code generation option for IBM System z10 and adds a check in head[31,64].S to prevents the execution of a kernel compiled for a new processor type on an old machine. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* KVM: s390: arch backend for the kvm kernel moduleHeiko Carstens2008-04-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch contains the port of Qumranet's kvm kernel module to IBM zSeries (aka s390x, mainframe) architecture. It uses the mainframe's virtualization instruction SIE to run virtual machines with up to 64 virtual CPUs each. This port is only usable on 64bit host kernels, and can only run 64bit guest kernels. However, running 31bit applications in guest userspace is possible. The following source files are introduced by this patch arch/s390/kvm/kvm-s390.c similar to arch/x86/kvm/x86.c, this implements all arch callbacks for kvm. __vcpu_run calls back into sie64a to enter the guest machine context arch/s390/kvm/sie64a.S assembler function sie64a, which enters guest context via SIE, and switches world before and after that include/asm-s390/kvm_host.h contains all vital data structures needed to run virtual machines on the mainframe include/asm-s390/kvm.h defines kvm_regs and friends for user access to guest register content arch/s390/kvm/gaccess.h functions similar to uaccess to access guest memory arch/s390/kvm/kvm-s390.h header file for kvm-s390 internals, extended by later patches Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
* kbuild: enable 'make AFLAGS=...' to add additional options to ASSam Ravnborg2007-10-151-3/+3
| | | | | | | | | | | | | | | The variable AFLAGS is a wellknown variable and the usage by kbuild may result in unexpected behaviour. On top of that several people over time has asked for a way to pass in additional flags to gcc. This patch replace use of AFLAGS with KBUILD_AFLAGS all over the tree. Patch was tested on following architectures: alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k, s390 Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* kbuild: enable 'make CFLAGS=...' to add additional options to CCSam Ravnborg2007-10-141-4/+4
| | | | | | | | | | | | | | | | | | | | | | | The variable CFLAGS is a wellknown variable and the usage by kbuild may result in unexpected behaviour. On top of that several people over time has asked for a way to pass in additional flags to gcc. This patch replace use of CFLAGS with KBUILD_CFLAGS all over the tree and enabling one to use: make CFLAGS=... to specify additional gcc commandline options. One usecase is when trying to find gcc bugs but other use cases has been requested too. Patch was tested on following architectures: alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k Test was simple to do a defconfig build, apply the patch and check that nothing got rebuild. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* pass -msize-long to sparse on s390Al Viro2007-07-151-1/+1
| | | | | | | | s390 is the only 32bit with unsigned long for size_t (usual for those is unsigned int). Tell sparse... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [S390] zfcpdump support.Michael Holzheu2007-04-271-0/+3
| | | | | | | | | | | | | | s390 machines provide hardware support for creating Linux dumps on SCSI disks. For creating a dump a special purpose dump Linux is used. The first 32 MB of memory are saved by the hardware before the dump Linux is booted. Via an SCLP interface, the saved memory can be accessed from Linux. This patch exports memory and registers of the crashed Linux to userspace via a debugfs file. For more information refer to Documentation/s390/zfcpdump.txt, which is included in this patch. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
* [S390] Improved kernel stack overflow checking.Martin Schwidefsky2007-04-271-0/+2
| | | | | | | | | | | Recent cvs versions of gcc have support for an improved stack overflow checking that calculates the size of the guard size for each function. If the compiler accepts -mstack-size without -mstack-guard then the new stack check is available. We always want to use the new stack checker. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
* [S390] Replace $(ARCH) macros in MakefileMichael Holzheu2007-02-211-6/+6
| | | | | | | Since $(ARCH) is always "s390" we can replace it with "s390". Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] set KBUILD_IMAGE.Christian Borntraeger2006-12-041-0/+3
| | | | | | | Set KBUILD_IMAGE to a sane value. This enables "make rpm" Signed-off-by: Christian Borntraeger <cborntra@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] config option for z9-109 code generation.Christian Borntraeger2006-09-281-0/+1
| | | | | | | | Add a kernel config option for the IBM System z9. This will produce faster code on newer compilers using the -march=z9-109 option. Signed-off-by: Christian Borntraeger <cborntra@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [PATCH] lockdep: s390 CONFIG_FRAME_POINTER supportHeiko Carstens2006-07-031-0/+5
| | | | | | | | | | | CONFIG_FRAME_POINTER support for s390. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] s390_hypfs filesystemMichael Holzheu2006-06-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On zSeries machines there exists an interface which allows the operating system to retrieve LPAR hypervisor accounting data. For example, it is possible to get usage data for physical and virtual cpus. In order to provide this information to user space programs, I implemented a new virtual Linux file system named 's390_hypfs' using the Linux 2.6 libfs framework. The name 's390_hypfs' stands for 'S390 Hypervisor Filesystem'. All the accounting information is put into different virtual files which can be accessed from user space. All data is represented as ASCII strings. When the file system is mounted the accounting information is retrieved and a file system tree is created with the attribute files containing the cpu information. The content of the files remains unchanged until a new update is made. An update can be triggered from user space through writing 'something' into a special purpose update file. We create the following directory structure: <mount-point>/ update cpus/ <cpu-id> type mgmtime <cpu-id> ... hyp/ type systems/ <lpar-name> cpus/ <cpu-id> type mgmtime cputime onlinetime <cpu-id> ... <lpar-name> cpus/ ... - update: File to trigger update - cpus/: Directory for all physical cpus - cpus/<cpu-id>/: Directory for one physical cpu. - cpus/<cpu-id>/type: Type name of physical zSeries cpu. - cpus/<cpu-id>/mgmtime: Physical-LPAR-management time in microseconds. - hyp/: Directory for hypervisor information - hyp/type: Typ of hypervisor (currently only 'LPAR Hypervisor') - systems/: Directory for all LPARs - systems/<lpar-name>/: Directory for one LPAR. - systems/<lpar-name>/cpus/<cpu-id>/: Directory for the virtual cpus - systems/<lpar-name>/cpus/<cpu-id>/type: Typ of cpu. - systems/<lpar-name>/cpus/<cpu-id>/mgmtime: Accumulated number of microseconds during which a physical CPU was assigned to the logical cpu and the cpu time was consumed by the hypervisor and was not provided to the LPAR (LPAR overhead). - systems/<lpar-name>/cpus/<cpu-id>/cputime: Accumulated number of microseconds during which a physical CPU was assigned to the logical cpu and the cpu time was consumed by the LPAR. - systems/<lpar-name>/cpus/<cpu-id>/onlinetime: Accumulated number of microseconds during which the logical CPU has been online. As mount point for the filesystem /sys/hypervisor/s390 is created. The update process is triggered when writing 'something' into the 'update' file at the top level hypfs directory. You can do this e.g. with 'echo 1 > update'. During the update the whole directory structure is deleted and built up again. Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Ingo Oeser <ioe-lkml@rameria.de> Cc: Joern Engel <joern@wohnheim.fh-wedel.de> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] arch/s390/Makefile: remove -finline-limit=10000Adrian Bunk2006-04-111-1/+0
| | | | | | | | | | | -finline-limit might have been required for older compilers, but nowadays it does no longer make sense. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] s390: cleanup KconfigMartin Schwidefsky2006-01-061-4/+2
| | | | | | | | | | Sanitize some s390 Kconfig options. We have ARCH_S390, ARCH_S390X, ARCH_S390_31, 64BIT, S390_SUPPORT and COMPAT. Replace these 6 options by S390, 64BIT and COMPAT. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] s390: merge common parts of head.S and head64.SHeiko Carstens2005-11-071-3/+1
| | | | | | | | | | | Merge common parts of head.S and head64.S into head.S and move architecture specific parts to head31.S and head64.S respectively. Saves us ~500 lines of duplicated assembly code. Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild Linus Torvalds2005-09-091-10/+0
|\
| * kbuild: m68k,parisc,ppc,ppc64,s390,xtensa use generic asm-offsets.h supportSam Ravnborg2005-09-091-10/+0
| | | | | | | | | | | | Delete obsoleted parts form arch makefiles and rename to asm-offsets.h Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* | [PATCH] missing CHECKFLAGS on s390viro@ZenIV.linux.org.uk2005-09-091-0/+2
|/ | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-161-0/+116
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
OpenPOWER on IntegriCloud