summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/platforms/8xx
Commit message (Collapse)AuthorAgeFilesLines
* powerpc: implement GPIO LIB API on CPM1 Freescale SoC.Jochen Friedrich2008-07-281-0/+10
| | | | | | | This patch implement GPIO LIB support for the CPM1 GPIOs. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/CPM: Add i2c pins to dts and board setupJochen Friedrich2008-07-142-0/+7
| | | | | | | | | | | | Initialize I2C pins on boards with CPM1/CPM2 controllers and document the i2c bus in booting-without-of. The boards don't have any I2C chips connected to the I2C bus, so unless some external chips are connected to the boards, this code is just an example of setting everything else up. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] CPM: Always use new binding.Scott Wood2008-04-171-4/+0
| | | | | | | | The kconfig entry can go away once arch/ppc and references to the config in drivers are removed. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] 8xx: Timebase frequency should not depend on bus-frequencyAnton Vorontsov2008-02-261-6/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | m8xx_setup.c says: /* Force all 8xx processors to use divide by 16 processor clock. */ And at the same time it is using bus-frequency for calculating timebase. It is okay for most setups because bus-frequency is equal to clock-frequency. The problem emerges when cpu frequency is > 66MHz, quoting u-boot/cpu/mpc8xx/speed.c: if (gd->cpu_clk <= 66000000) { sccr_reg |= SCCR_EBDF00; /* bus division factor = 1 */ gd->bus_clk = gd->cpu_clk; } else { sccr_reg |= SCCR_EBDF01; /* bus division factor = 2 */ gd->bus_clk = gd->cpu_clk / 2; } So in case of cpu clock > 66MHz, bus_clk = cpu_clk / 2. An then, from Linux, we calculate timebase frequency as tb_freq = bus_clk / 16, that is cpu_clk / 2 / 16, which is wrong. This fixes the system time drifting problem on the EP885C board running at 133MHz. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] 8xx: adder875, ep88xc: fix to match recent 8xx cleanups.Scott Wood2008-02-052-4/+3
| | | | | | | | | asm/commproc.h was renamed to asm/cpm1.h sysdev/commproc.h was renamed to platforms/8xx/mpc8xx.h m8xx_pic_init was renamed to mpc8xx_pics_init Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] CPM: Rename commproc to cpm1 and cpm2_common.c to cpm2.cJochen Friedrich2008-01-283-2/+3
| | | | | | | | | Rename commproc.[ch] to cpm1.[ch] to be more consistent with cpm2. Also rename cpm2_common.c to cpm2.c as suggested by Scott Wood. Adjust the includes accordingly. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] 8xx: Get rid of conditional includes of board specific setupJochen Friedrich2008-01-282-2/+2
| | | | | | | | Directly include mpc885ads.h from mpc885ads_setup.c. Now we can get rid of the arch dependent includes in mpc8xx.h. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] 8xx: Remove sysdev/commproc.hJochen Friedrich2008-01-285-6/+26
| | | | | | | | | Move cpm1 specific prototypes to asm/commproc.h and mpc8xx specific prototypes to asm/mpc8xx.h. Adjust includes accordingly. Remove now unneeded sysdev/commproc.h. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] 8xx: Remove unneeded and misspelled prototype m8xx_calibrate_decrJochen Friedrich2008-01-281-1/+0
| | | | | | | | m8xx_calibrate_decr seems to be a misspelled prototype for mpc8xx_calibrate_decr. As it's not needed anyways, just remove it. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] 8xx: Rename m8xx_pic_init to mpc8xx_pics_initJochen Friedrich2008-01-284-5/+5
| | | | | | | | | | | | m8xx_pic_init calls both mpc8xx_pic_init and cpm_pic_init. Renaming the function to use the same name space as the rest of the mpc8xx specific funtions and to be more meaningful. m8xx_pic_init is declared in ppc8xx_pic.h but defined nowhere in the ppc tree. Remove it. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] 8xx: Use machine_*_initcall() hooks in platform codeGrant Likely2008-01-233-9/+6
| | | | | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] 8xx: adder875 - Fix flash bus-width and remove duplicate __initdataScott Wood2008-01-231-1/+1
| | | | | Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] 8xx: Analogue & Micro Adder875 board support.Scott Wood2008-01-233-0/+128
| | | | | Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] 8xx: Convert mpc866ads to the new device binding.Scott Wood2007-12-133-253/+81
| | | | | | | | Verified on mpc866ads. This version has muram and brg nodes added to dts to get the things work. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org>
* [POWERPC] Add missing spaces in printk formatsjoe@perches.com2007-12-031-1/+1
| | | | | Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] 8xx/wrapper: Embedded Planet EP88xC supportScott Wood2007-10-043-0/+187
| | | | | | | | This board is also resold by Freescale under the names "QUICCStart MPC885 Evaluation System" and "CWH-PPC-885XN-VE". Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] 8xx: mpc885ads cleanupScott Wood2007-10-043-336/+153
| | | | | | | | It now uses the new CPM binding and the generic pin/clock functions, and has assorted fixes and cleanup. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] 8xx: Work around CPU15 erratum.Scott Wood2007-10-031-0/+16
| | | | | | | | | | | | | The CPU15 erratum on MPC8xx chips can cause incorrect code execution under certain circumstances, where there is a conditional or indirect branch in the last word of a page, with a target in the last cache line of the next page. This patch implements one of the suggested workarounds, by forcing a TLB miss whenever execution crosses a page boundary. This is done by invalidating the pages before and after the one being loaded into the TLB in the ITLB miss handler. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] 8xx: Infrastructure code cleanup.Scott Wood2007-10-035-94/+22
| | | | | | | | | | | | | | | | | | | | | 1. Keep a global mpc8xx_immr mapping, rather than constantly creating temporary mappings. 2. Look for new fsl,cpm1 and fsl,cpm1-pic names. 3. Always reset the CPM when not using the udbg console; this is required in case the firmware initialized a device that is incompatible with one that the kernel is about to use. 4. Remove some superfluous casts and header includes. 5. Change a usage of IMAP_ADDR to get_immrbase(). 6. Use phys_addr_t, not uint, for dpram_pbase. 7. Various sparse-related fixes, such as __iomem annotations. 8. Remove mpc8xx_show_cpuinfo, which doesn't provide anything useful beyond the generic cpuinfo handler. 9. Move prototypes for 8xx support functions from board files to sysdev/commproc.h. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] Add early debug console for CPM serial ports.Scott Wood2007-10-031-0/+1
| | | | | | | | | This code assumes that the ports have been previously set up, with buffers in DPRAM. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] Convert define_machine(mpc885_ads) to C99 initializer syntaxTony Breeds2007-09-221-6/+11
| | | | | | | | Make the define_machine() block for mpc885_ads more greppable and consistent with other examples in tree. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Remove old includes from arch/ppcKumar Gala2007-08-225-6/+2
| | | | | | | | | | | | | | | | | Remove includes of files that existed in arch/ppc that we dont need in arch/powerpc anymore. The following includes were removed: <asm/amigappc.h> <asm/bootinfo.h> <asm/ppcboot.h> <asm/ppc_sys.h> <asm/residual.h> <asm/m8260_pci.h> This also caused platforms/embedded6xx/mpc7448_hpc2.h to no longer be needed and thus removed. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] Whitespace cleanup in arch/powerpcScott Wood2007-08-221-36/+36
| | | | | Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] 8xx: Remove unnecessary loops_per_jiffy initialization codeJon Loeliger2007-08-172-28/+0
| | | | | | Signed-off-by: Jon Loeliger <jdl@freescale.com> Acked-by: Vitaly Bordug <vitb@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* powerpc: 8xx: fix whitespace and indentationVitaly Bordug2007-07-171-67/+58
| | | | | | | | | | | | | | | | Rolling forward PCMCIA driver, it was discovered that the indentation in existing one, as well as in BSP side are very odd. This patch is just result of Lindent run ontop of culprit files. Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [POWERPC] 8xx: mpc885ads pcmcia supportVitaly Bordug2007-07-102-0/+76
| | | | | | | | | | | | | | | | | | | | Adds support for PowerQuicc on-chip PCMCIA. The driver is implemented as of_device, so only arch/powerpc stuff is capable to use it, which now implies only mpc885ads reference board. To cope with the code that should be hooked inside driver, but is really board specific (like set_voltage), global structure mpc8xx_pcmcia_ops holds necessary function pointers that are filled in the BSP code. [akpm@linux-foundation.org: whitespace diddles] Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Olof Johansson <olof@lixom.net> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* fix file specification in commentsUwe Kleine-König2007-05-092-2/+2
| | | | | | | Many files include the filename at the beginning, serveral used a wrong one. Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* Merge branch 'kconfig' of ↵Paul Mackerras2007-04-241-36/+31
|\ | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.22
| * [POWERPC] Convert 8xx platform to unified platform KconfigKumar Gala2007-04-121-36/+31
| | | | | | | | | | | | | | | | Moved 8xx platform Kconfig over to being sourced by the unified arch/powerpc/platforms/Kconfig. Also, cleaned up whitespace issues in 8xx Kconfig. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | [POWERPC] Rename get_property to of_get_property: arch/powerpcStephen Rothwell2007-04-133-8/+8
|/ | | | | | Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] 8xx parenthesis balanceMariusz Kozlowski2007-03-162-2/+2
| | | | | | | This balances parenthesis in powerpc 8xx header files. Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Add mpc866ads board-specific bits to arch/powerpcVitaly Bordug2007-02-073-0/+397
| | | | | | | | | This add support of the Freescale mpc86xads reference board to arch/powerpc. Supported SMC1 and SMC2 (UART and serial console), FEC 100Mbps Ethernet, SCC1 Ethernet (10Mbps hdx) Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] 8xx: Add mpc885ads support and common mpc8xx filesVitaly Bordug2007-02-075-257/+833
| | | | | | | | | This adds the core 8xx stuff and specifically mpc885ads board-specific bits to arch/powerpc. Respective Kconfig has been cleaned up from the stuff not yet ported over to avoid confusion. Updated and cleaned version. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* powerpc: Merge enough to start building in arch/powerpc.Paul Mackerras2005-09-261-0/+352
This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
OpenPOWER on IntegriCloud