summaryrefslogtreecommitdiffstats
path: root/arch/mips
Commit message (Collapse)AuthorAgeFilesLines
* MIPS: mm: Move some checks out of 'for' loop in DMA operationsJayachandran C2013-09-251-8/+4
| | | | | | | | | | | | | | | | | | | | | | | The check cpu_needs_post_dma_flush() in mips_dma_sync_sg_for_cpu() and the check !plat_device_is_coherent() in mips_dma_sync_sg_for_device() can be moved outside the for loop. As a side effect, this also avoids a GCC bug that caused kernel compile to fail with the error: arch/mips/mm/dma-default.c: In function 'mips_dma_sync_sg_for_cpu': arch/mips/mm/dma-default.c:316:1: internal compiler error: in add_insn_before, at emit-rtl.c:3852 This gcc failure is seen in Code Sourcery toolchains [e.g. gcc version 4.7.2 (Sourcery CodeBench Lite 2012.09-99)] after commit "MIPS: Optimize current_cpu_type() for better code." Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5907/ Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Tested-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: cpu-features.h: s/MIPS53/MIPS64/Maciej W. Rozycki2013-09-241-1/+1
| | | | | | | | | No support for MIPS53 processors yet. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5876/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Fix invalid symbolic link fileMadhavan Srinivasan2013-09-191-1/+1
| | | | | | | | | | | | | | | | | | | Commit 3b29aa5ba204c [MIPS: add <dt-bindings/> symlink] created a symlink file in include/dt-bindings. Even though commit diff is fine, the symlink is invalid and ls -lb shows a newline character at the end of the filename: lrwxrwxrwx 1 maddy maddy 35 Sep 19 18:11 dt-bindings -> ../../../../../include/dt-bindings\n Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: steven.hill@imgtec.com Cc: mmarek@suse.cz Cc: swarren@nvidia.com Cc: linux-mips@linux-mips.org Cc: linux-kbuild@vger.kernel.org Cc: james.hogan@imgtec.com Patchwork: https://patchwork.linux-mips.org/patch/5859/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: PCI: pci-bcm1480: Include missing vt.h headerMarkos Chandras2013-09-191-0/+1
| | | | | | | | | | | | | | | | | | It's needed for the MAX_NR_CONSOLES macro. Fixes the following build problem on a randconfig: arch/mips/pci/pci-bcm1480.c: In function 'bcm1480_pcibios_init': arch/mips/pci/pci-bcm1480.c:261:36: error: 'MAX_NR_CONSOLES' undeclared (first use in this function) arch/mips/pci/pci-bcm1480.c:261:36: note: each undeclared identifier is reported only once for each function it appears in make[1]: *** [arch/mips/pci/pci-bcm1480.o] Error 1 Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5858/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Disable usermode switching of the FR bit for MIPS R5 CPUs.Ralf Baechle2013-09-191-0/+13
| | | | | | | | | | | Currently the kernel will always use the FR=0 register model for O32. If an O32 application did enable FR=1 mode, some data from another application might be leaked in the extra registers becoming visible. Iow, this patch is meant to make the kernel MIPS R5 tolerant but leaves proper MIPS R5 support to a future patchset. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Add MIPS R5 config5 register.Ralf Baechle2013-09-191-0/+7
| | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: PCI: Use pci_resource_to_user to map pci memory space properlyWolfgang Grandegger2013-09-191-0/+12
| | | | | | | | | | | [ralf@linux-mips.org: This only matters to Alchemy platforms. On other platforms fixup_bigphys_addr is just an identidy mapping.] Signed-off-by: Wolfgang Grandegger <wg@denx.de> Cc: tiejun.chen <tiejun.chen@windriver.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/1868/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: 74K/1074K: Correct erratum workaround.Maciej W. Rozycki2013-09-181-8/+18
| | | | | | | | | | | | Make sure 74K revision numbers are not applied to the 1074K. Also catch invalid usage. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5857/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Cleanup CP0 PRId and CP1 FPIR register access masksMaciej W. Rozycki2013-09-1812-45/+77
| | | | | | | | | | Replace hardcoded CP0 PRId and CP1 FPIR register access masks throughout. The change does not touch places that use shifted or partial masks. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5838/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Remove useless comment about kprobe from arch/mips/MakefileWu Zhangjin2013-09-181-3/+0
| | | | | | | | | | | | The commit c1bf207d6ee1eb72e9c10365edbdc7c9ff7fb9b0 (kernel.org) rsp. 58e9ad32a48dce37ffeea912f55bd1c94b85ad7f (lmo) [MIPS: kprobe: Add support] introduced a useless comment. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: David Daney <ddaney@caviumnetworks.com> Patchwork: https://patchwork.linux-mips.org/patch/1765/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Fix VGA_MAP_MEM macro.Leonid Yegoshin2013-09-181-1/+2
| | | | | | | | | | | | Use the CKSEG1ADDR macro when calculating VGA_MAP_MEM. [ralf@linux-mips.org: Include <asm/addrspace.h for CKSEG1ADDR.] Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5814/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Reimplement get_cycles().Ralf Baechle2013-09-181-1/+32
| | | | | | | | | | | | | This essentially reverts commit efb9ca08b5a2374b29938cdcab417ce4feb14b54 (kernel.org) / 58020a106879a8b372068741c81f0015c9b0b96dbv [[MIPS] Change get_cycles to always return 0.] Most users of get_cycles() invoke it as a timing interface. That's why in modern kernels it was never very much missed for. /dev/random however uses get_cycles() in the how the jitter in the interrupt timing contains some useful entropy. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Optimize current_cpu_type() for better code.Ralf Baechle2013-09-1719-19/+236
| | | | | | | | | | | | | o Move current_cpu_type() to a separate header file o #ifdefing on supported CPU types lets modern GCC know that certain code in callers may be discarded ideally turning current_cpu_type() into a function returning a constant. o Use current_cpu_type() rather than direct access to struct cpuinfo_mips. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5833/
* MIPS: Fix accessing to per-cpu data when flushing the cacheRalf Baechle2013-09-171-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes the following issue BUG: using smp_processor_id() in preemptible [00000000] code: kjournald/1761 caller is blast_dcache32+0x30/0x254 Call Trace: [<8047f02c>] dump_stack+0x8/0x34 [<802e7e40>] debug_smp_processor_id+0xe0/0xf0 [<80114d94>] blast_dcache32+0x30/0x254 [<80118484>] r4k_dma_cache_wback_inv+0x200/0x288 [<80110ff0>] mips_dma_map_sg+0x108/0x180 [<80355098>] ide_dma_prepare+0xf0/0x1b8 [<8034eaa4>] do_rw_taskfile+0x1e8/0x33c [<8035951c>] ide_do_rw_disk+0x298/0x3e4 [<8034a3c4>] do_ide_request+0x2e0/0x704 [<802bb0dc>] __blk_run_queue+0x44/0x64 [<802be000>] queue_unplugged.isra.36+0x1c/0x54 [<802beb94>] blk_flush_plug_list+0x18c/0x24c [<802bec6c>] blk_finish_plug+0x18/0x48 [<8026554c>] journal_commit_transaction+0x3b8/0x151c [<80269648>] kjournald+0xec/0x238 [<8014ac00>] kthread+0xb8/0xc0 [<8010268c>] ret_from_kernel_thread+0x14/0x1c Caches in most systems are identical - but not always, so we can't avoid the use of smp_call_function() by just looking at the boot CPU's data, have to fiddle with preemption instead. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5835
* MIPS: Provide nice way to access boot CPU's data.Ralf Baechle2013-09-171-0/+1
| | | | | | | | boot_cpu_data is used the same as current_cpu_data but returns the CPU data for CPU 0. This means it doesn't have to use smp_processor_id() thus no need to disable preemption. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2013-09-156-8/+49
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS fixes from Ralf Baechle: "These are four patches for three construction sites: - Fix register decoding for the combination of multi-core processors and multi-threading. - Two more fixes that are part of the ongoing DECstation resurrection work. One of these touches a DECstation-only network driver. - Finally Markos' trivial build fix for the AP/SP support. (With this applied now all MIPS defconfigs are building again)" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: kernel: vpe: Make vpe_attrs an array of pointers. MIPS: Fix SMP core calculations when using MT support. MIPS: DECstation I/O ASIC DMA interrupt handling fix MIPS: DECstation HRT initialization rearrangement
| * MIPS: kernel: vpe: Make vpe_attrs an array of pointers.Markos Chandras2013-09-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 567b21e973ccf5b0d13776e408d7c67099749eb8 "mips: convert vpe_class to use dev_groups" broke the build on MIPS since vpe_attrs should be an array of 'struct device_attribute' pointers. Fixes the following build problem: arch/mips/kernel/vpe.c:1372:2: error: missing braces around initializer [-Werror=missing-braces] arch/mips/kernel/vpe.c:1372:2: error: (near initialization for 'vpe_attrs[0]') [-Werror=missing-braces] Cc: Ralf Baechle <ralf@linux-mips.org> Cc: John Crispin <blogic@openwrt.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5819/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Fix SMP core calculations when using MT support.Leonid Yegoshin2013-09-131-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | The TCBIND register is only available if the core has MT support. It should not be read otherwise. Secondly, the number of TCs (siblings) are calculated differently depending on if the kernel is configured as SMVP or SMTC. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5822/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: DECstation I/O ASIC DMA interrupt handling fixMaciej W. Rozycki2013-09-132-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change complements commit d0da7c002f7b2a93582187a9e3f73891a01d8ee4 and brings clear_ioasic_irq back, renaming it to clear_ioasic_dma_irq at the same time, to make I/O ASIC DMA interrupts functional. Unlike ordinary I/O ASIC interrupts DMA interrupts need to be deasserted by software by writing 0 to the respective bit in I/O ASIC's System Interrupt Register (SIR), similarly to how CP0.Cause.IP0 and CP0.Cause.IP1 bits are handled in the CPU (the difference is SIR DMA interrupt bits are R/W0C so there's no need for an RMW cycle). Otherwise the handler is reentered over and over again. The only current user is the DEC LANCE Ethernet driver and its extremely uncommon DMA memory error handler that does not care when exactly the interrupt is cleared. Anticipating the use of DMA interrupts by the Zilog SCC driver this change however exports clear_ioasic_dma_irq for device drivers to choose the right application-specific sequence to clear the request explicitly rather than calling it implicitly in the .irq_eoi handler of `struct irq_chip'. Previously these interrupts were cleared in the .end handler of the said structure, before it was removed. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5826/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: DECstation HRT initialization rearrangementMaciej W. Rozycki2013-09-133-5/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Not all I/O ASIC versions have the free-running counter implemented, an early revision used in the 5000/1xx models aka 3MIN and 4MIN did not have it. Therefore we cannot unconditionally use it as a clock source. Fortunately if not implemented its register slot has a fixed value so it is enough if we check for the value at the end of the calibration period being the same as at the beginning. This also means we need to look for another high-precision clock source on the systems affected. The 5000/1xx can have an R4000SC processor installed where the CP0 Count register can be used as a clock source. Unfortunately all the R4k DECstations suffer from the missed timer interrupt on CP0 Count reads erratum, so we cannot use the CP0 timer as a clock source and a clock event both at a time. However we never need an R4k clock event device because all DECstations have a DS1287A RTC chip whose periodic interrupt can be used as a clock source. This gives us the following four configuration possibilities for I/O ASIC DECstations: 1. No I/O ASIC counter and no CP0 timer, e.g. R3k 5000/1xx (3MIN). 2. No I/O ASIC counter but the CP0 timer, i.e. R4k 5000/150 (4MIN). 3. The I/O ASIC counter but no CP0 timer, e.g. R3k 5000/240 (3MAX+). 4. The I/O ASIC counter and the CP0 timer, e.g. R4k 5000/260 (4MAX+). For #1 and #2 this change stops the I/O ASIC free-running counter from being installed as a clock source of a 0Hz frequency. For #2 it also arranges for the CP0 timer to be used as a clock source rather than a clock event device, because having an accurate wall clock is more important than a high-precision interval timer. For #3 there is no change. For #4 the change makes the I/O ASIC free-running counter installed as a clock source so that the CP0 timer can be used as a clock event device. Unfortunately the use of the CP0 timer as a clock event device relies on a succesful completion of c0_compare_interrupt. That never happens, because while waiting for a CP0 Compare interrupt to happen the function spins in a loop reading the CP0 Count register. This makes the CP0 Count erratum trigger reliably causing the interrupt waited for to be lost in all cases. As a result #4 resorts to using the CP0 timer as a clock source as well, just as #2. However we want to keep this separate arrangement in case (hope) c0_compare_interrupt is eventually rewritten such that it avoids the erratum. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5825/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | Remove GENERIC_HARDIRQ config optionMartin Schwidefsky2013-09-131-1/+0
|/ | | | | | | | After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2013-09-1298-484/+2732
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS updates from Ralf Baechle: "This has been sitting in -next for a while with no objections and all MIPS defconfigs except one are building fine; that one platform got broken by another patch in your tree and I'm going to submit a patch separately. - a handful of fixes that didn't make 3.11 - a few bits of Octeon 3 support with more to come for a later release - platform enhancements for Octeon, ath79, Lantiq, Netlogic and Ralink SOCs - a GPIO driver for the Octeon - some dusting off of the DECstation code - the usual dose of cleanups" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (65 commits) MIPS: DMA: Fix BUG due to smp_processor_id() in preemptible code MIPS: kexec: Fix random crashes while loading crashkernel MIPS: kdump: Skip walking indirection page for crashkernels MIPS: DECstation HRT calibration bug fixes MIPS: Export copy_from_user_page() (needed by lustre) MIPS: Add driver for the built-in PCI controller of the RT3883 SoC MIPS: DMA: For BMIPS5000 cores flush region just like non-coherent R10000 MIPS: ralink: Add support for reset-controller API MIPS: ralink: mt7620: Add cpu-feature-override header MIPS: ralink: mt7620: Add spi clock definition MIPS: ralink: mt7620: Add wdt clock definition MIPS: ralink: mt7620: Improve clock frequency detection MIPS: ralink: mt7620: This SoC has EHCI and OHCI hosts MIPS: ralink: mt7620: Add verbose ram info MIPS: ralink: Probe clocksources from OF MIPS: ralink: Add support for systick timer found on newer ralink SoC MIPS: ralink: Add support for periodic timer irq MIPS: Netlogic: Built-in DTB for XLP2xx SoC boards MIPS: Netlogic: Add support for USB on XLP2xx MIPS: Netlogic: XLP2xx update for I2C controller ...
| * Merge branch '3.11-fixes' into mips-for-linux-nextRalf Baechle2013-09-061-3/+3
| |\
| | * MIPS: DMA: Fix BUG due to smp_processor_id() in preemptible codeJerin Jacob2013-09-061-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The use of current_cpu_type() in cpu_is_noncoherent_r10000() is not preemption-safe. Use boot_cpu_type() instead to make it preemption-safe. <log> / # insmod mtd_readtest.ko dev=4 mtd_readtest: MTD device: 4 mtd_readtest: MTD device size 996671488, eraseblock size 524288, page size 4096, count of eraseblocks 1901, pages per eraseblock 128, OOB size 224 mtd_readtest: scanning for bad eraseblocks mtd_readtest: scanned 1901 eraseblocks, 0 are bad mtd_readtest: testing page read BUG: using smp_processor_id() in preemptible [00000000] code: insmod/99 caller is mips_dma_sync_single_for_cpu+0x2c/0x128 CPU: 2 PID: 99 Comm: insmod Not tainted 3.10.4 #67 Stack : 00000006 69735f63 00000000 00000000 00000000 00000000 808273d6 00000032 80820000 00000002 8d700000 8de48fa0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 8d6afb00 8d6afb24 80721f24 807b9927 8012c130 80820000 80721f24 00000002 00000063 8de48fa0 8082333c 807b98e6 8d6afaa0 ... Call Trace: [<80109984>] show_stack+0x64/0x7c [<80666230>] dump_stack+0x20/0x2c [<803a2210>] debug_smp_processor_id+0xe0/0xf0 [<801116f0>] mips_dma_sync_single_for_cpu+0x2c/0x128 [<8043456c>] nand_plat_read_page+0x16c/0x234 [<8042fad4>] nand_do_read_ops+0x194/0x480 [<804301dc>] nand_read+0x50/0x7c [<804261c8>] part_read+0x70/0xc0 [<804231dc>] mtd_read+0x80/0xe4 [<c0431354>] init_module+0x354/0x6f8 [mtd_readtest] [<8010057c>] do_one_initcall+0x140/0x1a4 [<80176d7c>] load_module+0x1b5c/0x2258 [<8017752c>] SyS_init_module+0xb4/0xec [<8010f3fc>] stack_done+0x20/0x44 BUG: using smp_processor_id() in preemptible [00000000] code: insmod/99 </log> Signed-off-by: Jerin Jacob <jerinjacobk@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5800/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | Merge branch '3.11-fixes' into mips-for-linux-nextRalf Baechle2013-09-055-56/+61
| |\ \ | | |/
| | * MIPS: kexec: Fix random crashes while loading crashkernelPrem Mallappa2013-09-051-51/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixed compilation errors in case of non-KEXEC kernel Rearranging code so that crashk_res gets updated. - crashk_res is updated after mips_parse_crashkernel(), after resource_init(), which is after arch_mem_init(). - The reserved memory is actually treated as Usable memory, Unless we load the crash kernel, everything works. Signed-off-by: Prem Mallappa <pmallappa@caviumnetworks.com> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/5805/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * MIPS: kdump: Skip walking indirection page for crashkernelsPrem Mallappa2013-09-051-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | KDUMP: skip indirection page, as crashkernel has already copied to destination [ralf@linux-mips.org: cosmetic changes.] Signed-off-by: Prem Mallappa <pmallappa@caviumnetworks.com> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/5786/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * MIPS: DECstation HRT calibration bug fixesMaciej W. Rozycki2013-09-052-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change corrects DECstation HRT calibration, by removing the following bugs: 1. Calibration period selection -- HZ / 10 has been chosen, however on DECstation computers, HZ never divides by 10, as the choice for HZ is among 128, 256 and 1024. The choice therefore results in a systematic calibration error, e.g. 6.25% for the usual choice of 128 for HZ: 128 / 10 * 10 = 120 (128 - 120) / 128 -> 6.25% The change therefore makes calibration use HZ / 8 that is always accurate for the HZ values available, getting rid of the systematic error. 2. Calibration starting point synchronisation -- the duration of a number of intervals between DS1287A periodic interrupt assertions is measured, however code does not ensure at the beginning that the interrupt has not been previously asserted. This results in a variable error of e.g. up to another 6.25% for the period of HZ / 8 (8.(3)% with the original HZ / 10 period) and the usual choice of 128 for HZ: 1 / 16 -> 6.25% 1 / 12 -> 8.(3)% The change therefore adds an initial call to ds1287_timer_state that clears any previous periodic interrupt pending. The same issue applies to both I/O ASIC counter and R4k CP0 timer calibration on DECstation systems as similar code is used in both cases and both pieces of code are covered by this fix. On an R3400 test system used this fix results in a change of the I/O ASIC clock frequency reported from values like: I/O ASIC clock frequency 23185830Hz to: I/O ASIC clock frequency 24999288Hz removing the miscalculation by 6.25% from the systematic error and (for the individual sample provided) a further 1.00% from the variable error, accordingly. The nominal I/O ASIC clock frequency is 25MHz on this system. Here's another result, with the fix applied, from a system that has both HRTs available (using an R4400 at 60MHz nominal): MIPS counter frequency 59999328Hz I/O ASIC clock frequency 24999432Hz Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5807/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * MIPS: Export copy_from_user_page() (needed by lustre)Geert Uytterhoeven2013-09-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ERROR: "copy_from_user_page" [drivers/staging/lustre/lustre/libcfs/libcfs.ko] undefined! Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5808/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | Merge branch '3.11-fixes' into mips-for-linux-nextRalf Baechle2013-09-0410-54/+18
| |\ \ | | |/
| | * MIPS: powertv: Drop BOOTLOADER_DRIVER Kconfig symbolMarkos Chandras2013-09-034-35/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kbldr.h header file required for this was neither committed in the original submission in a3a0f8c8ed2e2470f4dcd6da95020d41fed84747 "MIPS: PowerTV: Base files for Cisco PowerTV platform" nor was it ever present in the git tree so this option never worked. Fixes the following build problem: arch/mips/powertv/reset.c:25:36: fatal error: asm/mach-powertv/kbldr.h: No such file or directory compilation terminated. Cc: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: David VomLehn <dvomlehn@cisco.com> Patchwork: https://patchwork.linux-mips.org/patch/5801/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * MIPS: Kconfig: Drop obsolete NR_CPUS_DEFAULT_{1,2} optionsMarkos Chandras2013-09-031-14/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The NR_CPUS_DEFAULT_1 introduced as an aid for the QEMU platform in 72ede9b18967e7a8a62a88f164f003193f6d891f "[MIPS] Qemu: Fix Symmetric Uniprocessor support" which was later removed in 302922e5f6901eb6f29c58539631f71b3d9746b8 "[MIPS] Qemu: Remove platform." On certain randconfigs it may happen for NR_CPUS to have an empty value because not all SMP platforms select a suitable NR_CPUS_DEFAULT_* value. We fix this by restoring the range of NR_CPUS to 2..64 and drop the NR_CPUS_DEFAULT_{1,2} symbols. The first one is no longer used and the latter is not needed since NR_CPUS=2 is now the default value. Fixes the following problem on a randconfig: .config:164:warning: symbol value '' invalid for NR_CPUS Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5747/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * MIPS: TXx9: Fix build error if CONFIG_TOSHIBA_JMR3927 is not selectedMarkos Chandras2013-09-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The jmr3927_vec txx9_board_vec struct is defined in txx9/jmr3927/setup.c which is only built if CONFIG_TOSHIBA_JMR3927 is selected. This patch fixes the following build problem: arch/mips/txx9/generic/setup.c: In function 'select_board': arch/mips/txx9/generic/setup.c:354:20: error: 'jmr3927_vec' undeclared (first use in this function) arch/mips/txx9/generic/setup.c:354:20: note: each undeclared identifier is reported only once for each function it appears in make[3]: *** [arch/mips/txx9/generic/setup.o] Error 1 Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5713/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * MIPS: Loongson: Hide the pci code behind CONFIG_PCIMarkos Chandras2013-09-031-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pci.c code depends on symbols which are only visible if CONFIG_PCI is selected. Also fixes the following problem on loongson allnoconfig: arch/mips/built-in.o: In function `pcibios_init': pci.c:(.init.text+0x528): undefined reference to `register_pci_controller' arch/mips/built-in.o:(.data+0xc): undefined reference to `loongson_pci_ops' Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5584/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * MIPS: Ftrace: Fix function tracing return address to matchCorey Minyard2013-09-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Dynamic function tracing was not working on MIPS. When doing dynamic tracing, the tracer attempts to match up the passed in address with the one the compiler creates in the mcount tables. The MIPS code was passing in the return address from the tracing function call, but the compiler tables were the address of the function call. So they wouldn't match. Just subtracting 8 from the return address will give the address of the function call. Easy enough. Signed-off-by: Corey Minyard <cminyard@mvista.com> [david.daney@cavium.com: Adjusted code comment and patch Subject.] Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/5592/
| | * MIPS: R4k clock source initialization bug fixMaciej W. Rozycki2013-09-031-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a fix for a bug introduced with commit 447cdf2628b59aa513a42785450b348dced26d8a, submitted as archived here: http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20080312235002.c717dde3.yoichi_yuasa%40tripeaks.co.jp regrettably with no further explanation. The issue is with the CP0 Count register read erratum present on R4000 and some R4400 processors. If this erratum is present, then a read from this register that happens around the time it reaches the value stored in the CP0 Compare register causes a CP0 timer interrupt that is supposed to happen when the values in the two registers match to be missed. The implication for the chips affected is the CP0 timer can be used either as a source of a timer interrupt (a clock event) or as a source of a high-resolution counter (a clock source), but not both at a time. The erratum does not affect timer interrupt operation itself, because in this case the CP0 Count register is only read while the timer interrupt has already been raised, while high-resolution counter references happen at random times. Additionally some systems apparently have issues with the timer interrupt line being routed externally and not following the usual CP0 Count/Compare semantics. In this case we don't want to use the R4k clock event. We've meant to address the erratum and the timer interrupt routing issue in time_init, however the commit referred to above broke our solution. What we currently have is we enable the R4k clock source if the R4k clock event initialization has succeeded (the timer is present and has no timer interrupt routing issue) or there is no CP0 Count register read erratum. Which gives the following boolean matrix: clock event | count erratum => clock source ------------+---------------+-------------- 0 | 0 | 1 (OK) 0 | 1 | 0 (bug!) -> no interference, could use 1 | 0 | 1 (OK) 1 | 1 | 1 (bug!) -> can't use, interference What we want instead is to enable the R4k clock source if there is no CP0 Count register read erratum (obviously) or the R4k clock event initialization has *failed* -- because in the latter case we won't be using the timer interrupt anyway, so we don't care about any interference CP0 Count reads might cause with the interrupt. This corresponds to the following boolean matrix: clock event | count erratum => clock source ------------+---------------+-------------- 0 | 0 | 1 0 | 1 | 1 1 | 0 | 1 1 | 1 | 0 This is implemented here, effectively reverting the problematic commit, and a short explanation is given next to code modified so that the rationale is known to future readers and confusion is prevented from happening here again. It is worth noting that mips_clockevent_init returns 0 upon success while cpu_has_mfc0_count_bug returns 0 upon failure. This is because the former function returns an error code while the latter returns a boolean value. To signify the difference I have therefore chosen to compare the result of the former call explicitly against 0. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5799/
| | * MIPS: Fix get_user_page_fast() for mips with cache aliasKamal Dasu2013-08-261-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | get_user_pages_fast() is missing cache flushes for MIPS platforms with cache aliases. Filesystem failures observed with DirectIO operations due to missing flush_anon_page() that use page coloring logic to work with cache aliases. This fix falls through to take slow_irqon path that calls get_user_pages() that has required logic for platforms where cpu_has_dc_aliases is true. [ralf@linux-mips.org: Explicity include <asm/cpu-features.h>.] Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/5469/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | MIPS: Add driver for the built-in PCI controller of the RT3883 SoCGabor Juhos2013-09-043-0/+638
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Ralink RT3883 SoCs have a built-in PCI Host Controller device. The patch adds a platform driver and device tree binding documentation for that. The patch also enables the HW_HAS_PCI config option. This is required in order to be able to enable the PCI support. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5758/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | MIPS: DMA: For BMIPS5000 cores flush region just like non-coherent R10000Jim Quinlan2013-09-041-6/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The BMIPS5000 (Zephyr) processor utilizes instruction speculation. A stale misprediction address in either the JTB or the CRS may trigger a prefetch inside a region that is currently being used by a DMA engine, which is not IO-coherent. This prefetch will fetch a line into the scache, and that line will soon become stale (ie wrong) during/after the DMA. Mayhem ensues. In dma-default.c, the r10000 is handled as a special case in the same way that we want to handle Zephyr. So we generalize the exception cases into a function, and include Zephyr as one of the processors that needs this special care. Signed-off-by: Jim Quinlan <jim2101024@gmail.com> Cc: linux-mips@linux-mips.org Cc: cernekee@gmail.com Patchwork: https://patchwork.linux-mips.org/patch/5776/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | MIPS: ralink: Add support for reset-controller APIJohn Crispin2013-09-044-0/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a helper for reseting different devices on the SoC. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5804/ Patchwork: https://patchwork.linux-mips.org/patch/5797/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | MIPS: ralink: mt7620: Add cpu-feature-override headerGabor Juhos2013-09-042-0/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Override certain CPU features to help GCC to optimize the generated code. Saves about 150KB in the vmlinux image with a generic configuration. text data bss dec hex filename 3824158 134820 234192 4193170 3ffb92 vmlinux.no-override 3664054 138804 234192 4037050 3d99ba vmlinux.override Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5759/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | MIPS: ralink: mt7620: Add spi clock definitionJohn Crispin2013-09-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Register a clock device for the SPI block of the MT7620 SoC. The clock device will be used by the SPI host controller driver to determine the base clock of the controller. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5754/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | MIPS: ralink: mt7620: Add wdt clock definitionJohn Crispin2013-09-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The watchdog driver of the SoC uses the clk API to get the clock associated with the watchdog device. However the MT7620 specific setup code does not register a clock for the watchdog device yet which leads to the following error: rt2880_wdt: probe of 10000120.watchdog failed with error -2 Register a clock device for the watchdog in order to avoid the error and make the watchdog usable. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5756/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | MIPS: ralink: mt7620: Improve clock frequency detectionGabor Juhos2013-09-042-33/+207
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current code assumes that the peripheral clock always runs at 40MHz which is not true in all configuration. The peripheral clock can also use the reference clock instead of the fixed 40MHz rate. If the reference clock runs at a different rate, various peripheries are behaving incorrectly. Additionally, the currectly calculated system clock is also wrong. The actual value what the code computes is the rate of the DRAM which can be different from the system clock. Add new helper functions to get the rate of the different clocks and use the correct values for the registered clock devices. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5755/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | MIPS: ralink: mt7620: This SoC has EHCI and OHCI hostsJohn Crispin2013-09-041-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Select the the EHCI and OHCI symbols. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5675/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | MIPS: ralink: mt7620: Add verbose ram infoJohn Crispin2013-09-041-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Make the code print which of SDRAM, DDR1 or DDR2 was detected. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/5671/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | MIPS: ralink: Probe clocksources from OFJohn Crispin2013-09-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make plat_time_init() call clocksource_of_init() allowing the systick cevt to load. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/5670/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | MIPS: ralink: Add support for systick timer found on newer ralink SoCJohn Crispin2013-09-043-0/+154
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Newer Ralink SoC (MT7620x and RT5350) have a 50KHz clock that runs independent of the SoC master clock. If we want to automatic frequency scaling to work we need to use the systick timer as the clock source. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5669/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | MIPS: ralink: Add support for periodic timer irqJohn Crispin2013-09-042-1/+186
| | | | | | | | | | | | | | | | | | | | | | | | | | | Adds a driver for the periodic timer found on Ralink SoC. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5682/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | MIPS: Netlogic: Built-in DTB for XLP2xx SoC boardsGanesan Ramalingam2013-09-034-1/+135
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a default built-in device tree for XLP2xx SoC. The new file xlp_fvp.dts has updated entries for I2C and memory. Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5705/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
OpenPOWER on IntegriCloud