summaryrefslogtreecommitdiffstats
path: root/arch/mips/kernel/cpu-probe.c
Commit message (Collapse)AuthorAgeFilesLines
...
* MIPS: Add defs & probing of extended CP0_EBaseJames Hogan2016-05-131-0/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CP0_EBase register may optionally have a write gate (WG) bit to allow the upper bits to be written, i.e. bits 31:30 on MIPS32 since r3 (to allow for an exception base outside of KSeg0/KSeg1 when segmentation control is in use) and bits 63:30 on MIPS64 (which also implies the extension of CP0_EBase to 64 bits long). The presence of this feature will need to be known about for VZ support in order to correctly save and restore all the bits of the guest CP0_EBase register, so add CPU feature definition and probing for this feature. Probing the WG bit on MIPS64 can be a bit fiddly, since 64-bit COP0 register access instructions were UNDEFINED for 32-bit registers prior to MIPS r6, and it'd be nice to be able to probe without clobbering the existing state, so there are 3 potential paths: - If we do a 32-bit read of CP0_EBase and the WG bit is already set, the register must be 64-bit. - On MIPS r6 we can do a 64-bit read-modify-write to set CP0_EBase.WG, since the upper bits will read 0 and be ignored on write if the register is 32-bit. - On pre-r6 cores, we do a 32-bit read-modify-write of CP0_EBase. This avoids the potentially UNDEFINED behaviour, but will clobber the upper 32-bits of CP0_EBase if it isn't a simple sign extension (which also requires us to ensure BEV=1 or modifying the exception base would be UNDEFINED too). It is hopefully unlikely a bootloader would set up CP0_EBase to a 64-bit segment and leave WG=0. [ralf@linux-mips.org: Resolved merge conflict.] Signed-off-by: James Hogan <james.hogan@imgtec.com> Tested-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13223/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BMIPS: BMIPS4380 and BMIPS5000 support RIXIFlorian Fainelli2016-05-131-1/+2
| | | | | | | | | | | | | | | | | | Make BMIPS4380 and BMIPS5000 advertise support for RIXI through cpu_probe_broadcom(). bmips_cpu_setup() needs to be called shortly after that, during prom_init() in order to enable the proper Broadcom-specific register to turn on RIXI and the "rotr" instruction. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: john@phrozen.org Cc: cernekee@gmail.com Cc: jon.fraser@broadcom.com Cc: pgynther@google.com Cc: paul.burton@imgtec.com Cc: ddaney.cavm@gmail.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12507/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Move RIXI exception enabling after vendor-specific cpu_probeFlorian Fainelli2016-05-131-9/+9
| | | | | | | | | | | | | | | | | | | | | Some processors may not have the RIXI bit advertised in the Config3 register, not being a MIPS32R2 or R6 core, yet, they might be supporting it through a different way, which is overriden during vendor-specific cpu_probe(). Move the RIXI exceptions enabling after the vendor-specific cpu_probe() function has had a change to run and override the current CPU's options with MIPS_CPU_RIXI. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: john@phrozen.org Cc: cernekee@gmail.com Cc: jon.fraser@broadcom.com Cc: pgynther@google.com Cc: paul.burton@imgtec.com Cc: ddaney.cavm@gmail.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12506/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Separate XPA CPU feature into LPA and MVHJames Hogan2016-05-131-0/+2
| | | | | | | | | | | | | | | | | | | | | | | XPA (eXtended Physical Addressing) should be detected as a combination of two architectural features: - Large Physical Address (as per Config3.LPA). With XPA this will be set on MIPS32r5 cores, but it may also be set for MIPS64r2 cores too. - MTHC0/MFHC0 instructions (as per Config5.MVH). With XPA this will be set, but it may also be set in VZ guest context even when Config3.LPA in the guest context has been cleared by the hypervisor. As such, XPA is only usable if both bits are set. Update CPU features to separate these two features, with cpu_has_xpa requiring both to be set. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Maciej W. Rozycki <macro@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13112/ Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Support extended ASIDsPaul Burton2016-05-131-0/+13
| | | | | | | | | | | | | | | | | Add support for extended ASIDs as determined by the Config4.AE bit. Since the only supported CPUs known to implement this are Netlogic XLP and MIPS I6400, select this variable ASID support based upon CONFIG_CPU_XLP and CONFIG_CPU_MIPSR6. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Jayachandran C. <jchandra@broadcom.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13211/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Loongson-3: Fast TLB refill handlerHuacai Chen2016-05-131-1/+1
| | | | | | | | | | | | | | | | | Loongson-3A R2 has pwbase/pwfield/pwsize/pwctl registers in CP0 (this is very similar to HTW) and lwdir/lwpte/lddir/ldpte instructions which can be used for fast TLB refill. [ralf@linux-mips.org: Resolve conflict.] Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Steven J . Hill <sjhill@realitydiluted.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12754/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Loongson: Invalidate special TLBs when neededHuacai Chen2016-05-131-0/+3
| | | | | | | | | | | | | | | | | | | Loongson-2 has a 4 entry itlb which is a subset of jtlb, Loongson-3 has a 4 entry itlb and a 4 entry dtlb which are subsets of jtlb. We should write diag register to invalidate itlb/dtlb when flushing jtlb because itlb/dtlb are not totally transparent to software. For Loongson-3A R2 (and newer), we should invalidate ITLB, DTLB, VTLB and FTLB before we enable/disable FTLB. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Steven J . Hill <sjhill@realitydiluted.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12753/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Loongson: Add Loongson-3A R2 basic supportHuacai Chen2016-05-131-1/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Loongson-3 CPU family: Code-name Brand-name PRId Loongson-3A R1 Loongson-3A1000 0x6305 Loongson-3A R2 Loongson-3A2000 0x6308 Loongson-3B R1 Loongson-3B1000 0x6306 Loongson-3B R2 Loongson-3B1500 0x6307 Features of R2 revision of Loongson-3A: - Primary cache includes I-Cache, D-Cache and V-Cache (Victim Cache). - I-Cache, D-Cache and V-Cache are 16-way set-associative, linesize is 64 bytes. - 64 entries of VTLB (classic TLB), 1024 entries of FTLB (8-way set-associative). - Supports DSP/DSPv2 instructions, UserLocal register and Read-Inhibit/ Execute-Inhibit. [ralf@linux-mips.org: Resolved merge conflicts.] Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Steven J . Hill <sjhill@realitydiluted.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12751/ Patchwork: https://patchwork.linux-mips.org/patch/13136/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BMIPS: Pretty print BMIPS5200 processor nameFlorian Fainelli2016-05-131-1/+4
| | | | | | | | | | | | Just to ease debugging of multiplatform kernel, make sure we print "Broadcom BMIPS5200" for the BMIPS5200 implementation instead of Broadcom BMIPS5000. Fixes: 68e6a78373a6d ("MIPS: BMIPS: Add PRId for BMIPS5200 (Whirlwind)") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13014/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Detect DSP v3 supportZubair Lutfullah Kakakhel2016-05-131-1/+4
| | | | | | | | | | | | | | | | DSPv3 is supported on all MIPSr6 systems which indicate support for DSPv2. This doesn't require any changes to the kernel's handling of DSP resources. The patch is to detect support and indicate it in /proc/cpuinfo DSP v3 introduces a new instruction BPOSGE32C Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12918/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Probe the M6250 CPUPaul Burton2016-05-131-0/+4
| | | | | | | | | | | | | | Support probing the M6250 CPU now that cases for handling it have been added where required in the core MIPS kernel code. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Maciej W. Rozycki <macro@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12375/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Probe the P6600 corePaul Burton2016-05-131-0/+4
| | | | | | | | | | | | | | Support probing the P6600 core now that cases for handling it have been added throughout the core MIPS kernel code. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Maciej W. Rozycki <macro@imgtec.com> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12344/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Add P6600 cases to CPU switch statementsPaul Burton2016-05-131-0/+1
| | | | | | | | | | | | | | | | | | | | | Add cases supporting the P6600 CPU to various switch statements in core MIPS kernel code that define behaviour dependent upon the CPU. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Maciej W. Rozycki <macro@imgtec.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Petri Gynther <pgynther@google.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12343/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Detect MIPSr6 Virtual Processor supportPaul Burton2016-05-131-0/+2
| | | | | | | | | | | | | | | | | | MIPSr6 introduces support for "Virtual Processors", which are conceptually similar to VPEs from the now-deprecated MT ASE. Detect whether the system supports VPs using the VP bit in Config5, adding cpu_has_vp for use by later patches. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Maciej W. Rozycki <macro@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Steven J. Hill <sjhill@realitydiluted.com> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12327/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Add CPU identifiers and probing for Cavium CN73xx and CNF75xx processors.David Daney2016-05-131-0/+2
| | | | | | | | | | Add new processor identifiers for Cavium CN73xx and CNF75xx processors, and probe for them in cpu-probe.c Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12311/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Add IEEE Std 754 conformance mode selectionMaciej W. Rozycki2016-01-201-10/+95
| | | | | | | | | | | | | | | | | | | | | | | | Add an `ieee754=' kernel parameter to control IEEE Std 754 conformance mode. Use separate flags copied from the respective CPU feature flags, and adjusted according to the conformance mode selected, to make binaries requesting individual NaN encoding modes accepted or rejected as needed. Update the initial setting for FCSR and, in the full FPU emulation mode, its read-only mask accordingly. Accept the mode selection requested for legacy processors as well. As with the EF_MIPS_NAN2008 ELF file header flag adjust both ABS2008 and NAN2008 bits at the same time, to match the choice made for hardware currently implemented. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11481/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Determine the presence of IEEE Std 754-2008 featuresMaciej W. Rozycki2016-01-201-2/+74
| | | | | | | | | | | | | | | | | | | | | | Determine the presence of and the amount of control available over IEEE Std 754-2008 features. In the case of a hardware FPU being used examine the FIR register for the presence of the HAS2008 bit and then the FCSR register for the writability of the ABS2008 and NAN2008 bits and the hardwired state of each of these bits if read-only. Update the initial FCSR contents used for threads and the FCSR writability mask accordingly. For full FPU emulation and MIPS32 or MIPS64 processors make the FCSR ABS2008 and NAN2008 bits writable. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11480/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: math-emu: Add IEEE Std 754-2008 NaN encoding emulationMaciej W. Rozycki2016-01-201-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement IEEE Std 754-2008 NaN encoding wired to the state of the FCSR.NAN2008 bit. Make the interpretation of the quiet bit in NaN data as follows: * in the legacy mode originally defined by the MIPS architecture the value of 1 denotes an sNaN whereas the value of 0 denotes a qNaN, * in the 2008 mode introduced with revision 5 of the MIPS architecture the value of 0 denotes an sNaN whereas the value of 1 denotes a qNaN, following the definition of the preferred NaN encoding introduced with IEEE Std 754-2008. In the 2008 mode, following the requirement of the said standard, quiet an sNaN where needed by setting the quiet bit to 1 and leaving all the NaN payload bits unchanged. Update format conversion operations according to the rules set by IEEE Std 754-2008 and the MIPS architecture. Specifically: * propagate NaN payload bits through conversions between floating-point formats such that as much information as possible is preserved and specifically a conversion from a narrower format to a wider format and then back to the original format does not change a qNaN payload in any way, * conversions from a floating-point to an integer format where the source is a NaN, infinity or a value that would convert to an integer outside the range of the result format produce, under the default exception handling, the respective values defined by the MIPS architecture. In full FPU emulation set the FIR.HAS2008 bit to 1, however do not make any further FCSR bits writable. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11477/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Define the legacy-NaN and 2008-NaN featuresMaciej W. Rozycki2016-01-201-0/+2
| | | | | | | | | | | | | | | Allocate CPU option bits and define macros for the legacy-NaN and 2008-NaN IEEE Std 754 MIPS architecture features. Unconditionally mark the legacy-NaN feature as present across hardware and emulated floating-point configurations. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11475/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Extend hardware table walking support to MIPS64Paul Burton2015-11-111-2/+1
| | | | | | | | | | | | | | | | | | | Extend the existing support for Hardware Table Walking (HTW) to MIPS64 systems by supporting PMDs & setting the pointer size bit in PWSize, then ceasing to blacklist HTW on MIPS64 systems. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-kernel@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/11224/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Fix FTLB detection for R6James Hogan2015-09-221-5/+8
| | | | | | | | | | | | | | | | | | | | R6 removed the Config4.MMUExtDef field, with the low 16 bits only allowed to contain FTLB fields, and commit e87569cd6c57 ("MIPS: cpu-probe: Fix VTLB/FTLB configuration for R6") updated the probing of this field to assume an FTLB is always present for R6. However the FTLB may still be absent. The presence of those fields is actually specified by the MMU type in the Config.MT field, so use that (the new cpu_has_ftlb) to determine whether the FTLB is actually present. Fixes: e87569cd6c57 ("MIPS: cpu-probe: Fix VTLB/FTLB configuration for R6") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11160/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: cpu-features: Add cpu_has_ftlbJames Hogan2015-09-221-3/+5
| | | | | | | | | | | | | | | | Add cpu_has_ftlb, which specifies that an FTLB is present in addition to the VTLB, probed based on whether Config.MT == 4 (rather than 1 for standard JTLB). This is necessary since MIPS release 6 removes Config4.MMUExtDef, so the presence of the FTLB fields in Config4 must be determined from Config.MT instead. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11159/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Advertise MSA support via HWCAP when presentPaul Burton2015-09-031-0/+1
| | | | | | | | | | | | | | | | | If MSA is supported by both the hardware & the kernel then advertise that support to userland via the AT_HWCAP aux vector. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-kernel@vger.kernel.org Cc: Huacai Chen <chenhc@lemote.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/10799/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Advertise MIPSr6 via HWCAP when appropriatePaul Burton2015-09-031-0/+3
| | | | | | | | | | | | | | | | | When running on a CPU implementing the release 6 of the MIPS32 or MIPS64 ISA, advertise that to userland via the appropriate HWCAP bit. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-kernel@vger.kernel.org Cc: Huacai Chen <chenhc@lemote.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/10798/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: AT_HWCAP aux vector infrastructurePaul Burton2015-09-031-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In order for userland to determine whether various features are safe to use, it will need to know both that the hardware supports those features and that the kernel is recent enough & configured appropriately to support them. For example under the O32 modeless FP proposal the dynamic linker & ifunc resolvers will need this information. The kernel is the only thing in a position to know availability accurately, so the kernel needs to provide the information to userland. This patch introduces the infrastructure to provide the AT_HWCAP aux vector to userland in order to provide that information. It also defines the 2 currently specified flags, which indicate MIPSr6 & MSA support. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: Kees Cook <keescook@chromium.org> Cc: Huacai Chen <chenhc@lemote.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Alex Smith <alex@alex-smith.me.uk> Cc: linux-kernel@vger.kernel.org Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Ingo Molnar <mingo@kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/10797/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Probe for small (1KiB) page supportJames Hogan2015-09-031-0/+2
| | | | | | | | | | | Probe Config3 for small page support. This will be useful to give clues as to whether the PageGrain register exists. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10722/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Set up FTLB probability for I6400Markos Chandras2015-08-261-5/+13
| | | | | | | | | Set up the I6400 FTLB probability similar to P5600 and proAptiv. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10652/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: cpu-probe: Fix VTLB/FTLB configuration for R6Markos Chandras2015-08-261-1/+10
| | | | | | | | | | | | | R6 has dropped the MMUExtDef field from the config4 register and it now returns 0. However, the return value means nothing in that case and the only supported configuration for R6 is the VTLB+FTLB (MMUextDef == 3). As a result, rework the code so that the correct value is set for R6 cores. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10651/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Add default case for the FTLB enable/disable codeMarkos Chandras2015-08-261-3/+10
| | | | | | | | | | | | Add a default case for the FTLB enable/disable code. This will be used to detect that something went wrong in the set_ftlb_enable() function either because that function knows nothing about the running core, or simply because the core can't turn its FTLB on/off. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10650/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: cpu-probe: Remove cp0 hazard barrier when enabling the FTLBMarkos Chandras2015-08-261-1/+0
| | | | | | | | | | | We are so early in the boot process where we really don't want to stall and wait for CP0 FTLB related changes become visible so just drop the cp0 hazard barrier. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10649/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Add MIPS I6400 probe supportMarkos Chandras2015-08-261-0/+4
| | | | | | | | | | Add a case in cpu_probe_mips for the MIPS I6400 processor ID, which sets the CPU type to the new CPU_I6400. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10636/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: R12000: Enable branch prediction global historyJoshua Kinard2015-06-211-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The R12000 added a new feature to enhance branch prediction called "global history". Per the Vr10000 Series User Manual (U10278EJ4V0UM), Coprocessor 0, Diagnostic Register (22): """ If bit 26 is set, branch prediction uses all eight bits of the global history register. If bit 26 is not set, then bits 25:23 specify a count of the number of bits of global history to be used. Thus if bits 26:23 are all zero, global history is disabled. The global history contains a record of the taken/not-taken status of recently executed branches, and when used is XOR'ed with the PC of a branch being predicted to produce a hashed value for indexing the BPT. Some programs with small "working set of conditional branches" benefit significantly from the use of such hashing, some see slight performance degradation. """ This patch enables global history on R12000 CPUs and up by setting bit 26 in the branch prediction diagnostic register (CP0 $22) to '1'. Bits 25:23 are left alone so that all eight bits of the global history register are available for branch prediction. Signed-off-by: Joshua Kinard <kumba@gentoo.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ingenic: Add newer vendor IDsPaul Burton2015-06-211-1/+3
| | | | | | | | | | | | | | | | | | | | | | Ingenic have actually varied the vendor/company ID of the XBurst cores across their range of SoCs, whilst keeping the product ID & revision constant... Add definitions for vendor IDs known to be used in some of Ingenic's newer SoCs, and handle them in the same way as the existing Ingenic vendor ID from the JZ4740. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Co-authored-by: Paul Cercueil <paul@crapouillou.net> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-kernel@vger.kernel.org Cc: Huacai Chen <chenhc@lemote.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/10128/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Avoid an FPE exception in FCSR mask probingMaciej W. Rozycki2015-06-031-2/+1
| | | | | | | | | | | Use the default FCSR value in mask probing, avoiding an FPE exception where reset has left any exception enable and their corresponding cause bits set and the register is then rewritten with these bits active. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Joshua Kinard <kumba@gentoo.org> Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Merge branch '4.0-fixes' into mips-for-linux-nextRalf Baechle2015-04-131-0/+4
|\
| * MIPS: Add support for XPA.Steven J. Hill2015-03-191-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for extended physical addressing (XPA) so that 32-bit platforms can access equal to or greater than 40 bits of physical addresses. NOTE: 1) XPA and EVA are not the same and cannot be used simultaneously. 2) If you configure your kernel for XPA, the PTEs and all address sizes become 64-bit. 3) Your platform MUST have working HIGHMEM support. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9355/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | MIPS: Factor out FPU feature probingMaciej W. Rozycki2015-04-081-54/+71
| | | | | | | | | | | | | | | | | | | | | | Factor out FPU feature probing, mainly to remove code duplication from `fpu_disable'. No functional change although shuffle some code to avoid forward references. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9712/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | MIPS: Respect the ISA level in FCSR handlingMaciej W. Rozycki2015-04-081-0/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Define the central place the default FCSR value is set from, initialised in `cpu_probe'. Determine the FCSR mask applied to values written to the register with CTC1 in the full emulation mode and via ptrace(2), according to the ISA level of processor hardware or the writability of bits 31:18 if actual FPU hardware is used. Software may rely on FCSR bits whose functions our emulator does not implement, so it should not allow them to be set or software may get confused. For ptrace(2) it's just sanity. [ralf@linux-mips.org: Fixed double inclusion of <asm/current.h>.] Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9711/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | MIPS: math-emu: Set FIR feature flags for full emulationMaciej W. Rozycki2015-04-081-2/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement FIR feature flags in the FPU emulator according to features supported and architecture level requirements. The W, L and F64 bits have only been added at level #2 even though the features they refer to were also included with the MIPS64r1 ISA and the W fixed-point format also with the MIPS32r1 ISA. This is only relevant for the full emulation mode and the emulated CFC1 instruction as well as ptrace(2) accesses. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9707/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | MIPS: Correct ISA masking in FPU feature determinationMaciej W. Rozycki2015-04-081-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Correct an ISA level determination problem introduced with 8b8aa636 [MIPS: kernel: cpu-probe.c: Add support for MIPS R6], reverting explicit masking against individual `MIPS_CPU_ISA_*' macros in FPU feature determination. Feature macros such as `cpu_has_mips_r' cannot be used here, because they operate on CPU #0 and we want to refer to the current CPU instead. They cannot be used for masking against the current CPU either because they mask against CPU #0 too, e.g.: # define cpu_has_mips32r1 (cpu_data[0].isa_level & MIPS_CPU_ISA_M32R1) Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9706/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | MIPS: Clarify the comment for `__cpu_has_fpu'Maciej W. Rozycki2015-04-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | Reword the comment for `__cpu_has_fpu' to make it unambiguous this code is for external floating-point units only, generally MIPS I processors using the original CP1 hardware interface. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9673/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | MIPS: Add R16000 detectionJoshua Kinard2015-04-011-2/+7
| | | | | | | | | | | | | | | | | | | | | | This allows the kernel to correctly detect an R16000 MIPS CPU on systems that have those. Otherwise, such systems will detect the CPU as an R14000, due to similarities in the CPU PRId value. Signed-off-by: Joshua Kinard <kumba@gentoo.org> Cc: Linux MIPS List <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/9092/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | MIPS: Add arch CDMM definitions and probingJames Hogan2015-03-311-0/+2
|/ | | | | | | | | | | | | | | | | | | Add architectural definitions and probing for the MIPS Common Device Memory Map (CDMM) region. When supported and enabled at a particular physical address, this region allows some number of per-CPU devices to be discovered and controlled via MMIO. A bit exists in Config3 to determine whether the feature is present, and a CDMMBase CP0 register allows the region to be enabled at a particular physical address. [ralf@linux-mips.org: Sort conflict with other patches.] Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9178/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Add set/clear CP0 macros for PageGrain registerSteven J. Hill2015-02-201-1/+1
| | | | | | | | | Build set and clear macros for the PageGrain register. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9289/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Add LLB bit and related feature for the Config 5 CP0 registerMarkos Chandras2015-02-171-0/+2
| | | | | | | | | | | | | | | | | | | The LLBIT (bit 4) in the Config5 CP0 register indicates the software availability of the Load-Linked bit. This bit is only set by hardware and it has the following meaning: 0: LLB functionality is not supported 1: LLB functionality is supported. The following feature are also supported: - ERETNC instruction. Similar to ERET but it does not clear the LLB bit in the LLAddr register. - CP0 LLAddr/LLB bit must be set - LLbit is software accessible through the LLAddr[0] This will be used later on to emulate R2 LL/SC instructions. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
* MIPS: kernel: cpu-probe.c: Add support for MIPS R6Leonid Yegoshin2015-02-171-4/+16
| | | | | | | | | | Add MIPS R6 support when decoding the config0 c0 register. Also add MIPS R6 support when examining the ebase c0 register to get the core number and when getting the shadow set number from the srsctl c0 register. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
* MIPS: Add MIPS generic QEMU probe supportLeonid Yegoshin2015-02-161-0/+5
| | | | | | | Add a case in cpu_probe_mips for the MIPS generic QEMU processor ID. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
* MIPS: HTW: Prevent accidental HTW start due to nested htw_{start, stop}Markos Chandras2015-02-161-1/+3
| | | | | | | | | | | | | | | | | | | | | activate_mm() and switch_mm() call get_new_mmu_context() which in turn can enable the HTW before the entryhi is changed with the new ASID. Since the latter will enable the HTW in local_flush_tlb_all(), then there is a small timing window where the HTW is running with the new ASID but with an old pgd since the TLBMISS_HANDLER_SETUP_PGD hasn't assigned a new one yet. In order to prevent that, we introduce a simple htw counter to avoid starting HTW accidentally due to nested htw_{start,stop}() sequences. Moreover, since various IPI calls can enforce TLB flushing operations on a different core, such an operation may interrupt another htw_{stop,start} in progress leading inconsistent updates of the htw_seq variable. In order to avoid that, we disable the interrupts whenever we update that variable. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: <stable@vger.kernel.org> # 3.17+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9118/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2014-12-111-4/+67
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS updates from Ralf Baechle: "This is an unusually large pull request for MIPS - in parts because lots of patches missed the 3.18 deadline but primarily because some folks opened the flood gates. - Retire the MIPS-specific phys_t with the generic phys_addr_t. - Improvments for the backtrace code used by oprofile. - Better backtraces on SMP systems. - Cleanups for the Octeon platform code. - Cleanups and fixes for the Loongson platform code. - Cleanups and fixes to the firmware library. - Switch ATH79 platform to use the firmware library. - Grand overhault to the SEAD3 and Malta interrupt code. - Move the GIC interrupt code to drivers/irqchip - Lots of GIC cleanups and updates to the GIC code to use modern IRQ infrastructures and features of the kernel. - OF documentation updates for the GIC bindings - Move GIC clocksource driver to drivers/clocksource - Merge GIC clocksource driver with clockevent driver. - Further updates to bring the GIC clocksource driver up to date. - R3000 TLB code cleanups - Improvments to the Loongson 3 platform code. - Convert pr_warning to pr_warn. - Merge a bunch of small lantiq and ralink fixes that have been staged/lingering inside the openwrt tree for a while. - Update archhelp for IP22/IP32 - Fix a number of issues for Loongson 1B. - New clocksource and clockevent driver for Loongson 1B. - Further work on clk handling for Loongson 1B. - Platform work for Broadcom BMIPS. - Error handling cleanups for TurboChannel. - Fixes and optimization to the microMIPS support. - Option to disable the FTLB. - Dump more relevant information on machine check exception - Change binfmt to allow arch to examine PT_*PROC headers - Support for new style FPU register model in O32 - VDSO randomization. - BCM47xx cleanups - BCM47xx reimplement the way the kernel accesses NVRAM information. - Random cleanups - Add support for ATH25 platforms - Remove pointless locking code in some PCI platforms. - Some improvments to EVA support - Minor Alchemy cleanup" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (185 commits) MIPS: Add MFHC0 and MTHC0 instructions to uasm. MIPS: Cosmetic cleanups of page table headers. MIPS: Add CP0 macros for extended EntryLo registers MIPS: Remove now unused definition of phys_t. MIPS: Replace use of phys_t with phys_addr_t. MIPS: Replace MIPS-specific 64BIT_PHYS_ADDR with generic PHYS_ADDR_T_64BIT PCMCIA: Alchemy Don't select 64BIT_PHYS_ADDR in Kconfig. MIPS: lib: memset: Clean up some MIPS{EL,EB} ifdefery MIPS: iomap: Use __mem_{read,write}{b,w,l} for MMIO MIPS: <asm/types.h> fix indentation. MAINTAINERS: Add entry for BMIPS multiplatform kernel MIPS: Enable VDSO randomization MIPS: Remove a temporary hack for debugging cache flushes in SMTC configuration MIPS: Remove declaration of obsolete arch_init_clk_ops() MIPS: atomic.h: Reformat to fit in 79 columns MIPS: Apply `.insn' to fixup labels throughout MIPS: Fix microMIPS LL/SC immediate offsets MIPS: Kconfig: Only allow 32-bit microMIPS builds MIPS: signal.c: Fix an invalid cast in ISA mode bit handling MIPS: mm: Only build one microassembler that is suitable ...
| * MIPS: BMIPS: Add PRId for BMIPS5200 (Whirlwind)Kevin Cernekee2014-11-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a dual core (quad thread) BMIPS5000. It needs a little extra code to boot the second core (CPU2/CPU3), but for now we can treat it the same as a single core BMIPS5000. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: mbizon@freebox.fr Cc: jogo@openwrt.org Cc: jfraser@broadcom.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8166/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
OpenPOWER on IntegriCloud