summaryrefslogtreecommitdiffstats
path: root/arch/arm
Commit message (Collapse)AuthorAgeFilesLines
* [ARM] pxa: remove now unnecessary dma_needs_bounce()Eric Miao2010-08-052-8/+8
| | | | | | | | | | | | | | | With a correct dev->dma_mask before calling dmabounce_register_dev(), dma_needs_bounce() is not necessary. The sa1111, though, is a bit complicated. Until it's fully understood and fixed, dma_needs_bounce() for sa1111 is kept if CONFIG_SA1111 is enabled with no side effect (with the condition of machine_is_*) Thanks for Mike Rapoport to fix one error in the original version of the patch and get this tested. Acked-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* [ARM] pxa: merge all eseries board code into eseries.cEric Miao2010-08-058-998/+809
| | | | | Cc: Ian Molton <spyro@f2s.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* [ARM] pxa: move pmu device back into mach-pxa/Eric Miao2010-08-057-34/+18
| | | | | | | | | Not tested and enabled on MMP at this moment, and since the IRQ is different from mach-pxa, I'd prefer to move the PMU device back into mach-pxa/. Will introduce the PMU device to MMP once it's enabled and tested. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* [ARM] pxa/cm-x300: enable the IRQ_WAKEUP0 as wakeup source.Igor Grinberg2010-08-051-0/+1
| | | | | | Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* [ARM] pxa: add set_type to the pxa3xx ext_wakeup irq chip.Igor Grinberg2010-08-051-0/+12
| | | | | | | | | pxa3xx cpu needs the irq type setup to be able to wakeup from low power mode on IRQ_WAKEUPx events. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* [ARM] pxa: merge stargate2 and imote2 board filesJonathan Cameron2010-08-053-817/+454
| | | | | | Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* [ARM] pxa: fix all devices using wm97xx_batt.hMarek Vasut2010-08-057-47/+61
| | | | | | | | | | | This file is scheduled for removal, therefore fix all devices that use this file to use the suggested wm97xx.h and pass platform data properly. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Tomas Cech <sleep_walker@suse.cz> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* [ARM] pxa/z2: Register WM8750Marek Vasut2010-06-181-1/+4
| | | | | | | | This patch registers the WM8750 codec on a proper place on the ZipitZ2 machine after the WM8750 driver was converted to new API. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* [ARM] pxa/z2: Add battery support into Zipit Z2Marek Vasut2010-06-181-3/+39
| | | | | | | | This patch adds support for the AER915 battery chip into Zipit Z2 platform file. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* [ARM] pxa/raumfeld: Check charge state after resumeDaniel Mack2010-06-181-8/+21
| | | | | | | | Use the resume callback of the pda_power supply framework to check for a 'charge finished' event that might have occured during the sleep phase. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* [ARM] pxa/income: Add Income SBC supportMarek Vasut2010-06-185-3/+313
| | | | | | | | | | | | This is support for custom design based on Toradex Colibri PXA270 CPU card. Initial patch was by Pavel Revak. [daniel - rebased the code to follow the module/board split] Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Pavel Revak <palo@bielyvlk.sk> Cc: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* [ARM] pxa/colibri270: Split module and base board codeDaniel Mack2010-06-185-88/+151
| | | | | | | | | | Follow the idea of several MX31 based boards and split code that is related to the module from code that is baseboard specific. This makes adding new base board support easier, while avoiding code duplication. Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* [ARM] pxa/colibri270: Add TSC supportMarek Vasut2010-06-182-0/+43
| | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* [ARM] pxa/colibri270: Add UHC supportMarek Vasut2010-06-181-0/+34
| | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* [ARM] pxa/colibri270: Add FFUART MFPMarek Vasut2010-06-181-0/+4
| | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* [ARM] pxa/colibri270: Add MMC supportMarek Vasut2010-06-182-0/+32
| | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* [ARM] pxa/colibri270: Refactor board definition fileMarek Vasut2010-06-182-35/+43
| | | | | | | | This patch just moves code around and polishes it. Also, compile in only selected pieces of hardware. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* [ARM] pxa/vpac270: Add VGA modes for ADV7125Marek Vasut2010-06-181-1/+49
| | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* [ARM] pxa/vpac270: Add PMIC supportMarek Vasut2010-06-181-1/+57
| | | | | | | This patch adds support for the MAX1587A used on Voipac PXA270 board. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* [ARM] pxa/vpac270: Convert to use PATA PXA driverMarek Vasut2010-06-181-5/+13
| | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* [ARM] pata_pxa: DMA-capable PATA driverMarek Vasut2010-06-181-0/+33
| | | | | | | | | | This patch adds a driver for a harddrive attached to PXA address and data bus. Unlike pata_platform, this driver allows usage of PXA DMA controller, making the transmission speed 3x higher. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* [ARM] pxa/corgi: fix MMC/SD card detection failureEric Miao2010-06-141-1/+1
| | | | | Reported-by: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* [ARM] mmp: fix build failure due to IRQ_PMU depends on ARCH_PXAJonathan Cameron2010-06-141-1/+2
| | | | | | | | | PMU is not tested and enabled on MMP architecture at this moment, the device IRQ number, IRQ_PMU depends on ARCH_PXA. Build PMU only for ARCH_PXA. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* [ARM] pxa/mioa701: fix camera regressionRobert Jarzmik2010-06-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | Since commit a48c24a696f0d93c49f913b7818e9819612b1f4e, the camera is not working anymore. After the v4l2 migration, the mt9m111 camera board information was not passed to the i2c layer anymore, but stored for future use of v4l2 (through soc_camera). Because mioa701_i2c_devices[] was tagged as "__initdata", and because after the v4l2 migration, the new structure "iclink" references it, the mt9m111 driver is not probed anymore, as part of "iclink" is not valid (discarded after kernel init). Although there is not compilation error, nor runtime oops, this patch restores a working camera on the mioa701 board. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* [ARM] pxa/z2: fix flash layout to final versionMarek Vasut2010-06-131-16/+10
| | | | | | | | | This patch fixes flash layout to it's final version. Also, I fixed the authorship information of this file as it's been totally reworked since Ken released his last version. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* [ARM] pxa: fix incorrect gpio type in udc_pxa2xx.hSteve Bennett2010-06-131-2/+2
| | | | | | | | gpio must be int, not u16, otherwise -1 isn't recognised by gpio_is_valid(). Signed-off-by: Steve Bennett <steveb@workware.net.au> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2010-06-1019-30/+206
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6164/1: Add kto and kfrom to input operands list. ARM: 6166/1: Proper prefetch abort handling on pre-ARMv6 ARM: 6165/1: trap overflows on highmem pages from kmap_atomic when debugging ARM: 6152/1: ux500 make it possible to disable localtimers [ARM] pxa/spitz: Correctly register WM8750 [ARM] pxa/palmtc: storage class should be before const qualifier ARM: 6146/1: sa1111: Prevent deadlock in resume path ARM: 6145/1: ux500 MTU clockrate correction ARM: 6144/1: TCM memory bug freeing bug ARM: VFP: Fix vfp_put_double() for d16-d31
| * ARM: 6164/1: Add kto and kfrom to input operands list.Khem Raj2010-06-084-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When functions incoming parameters are not in input operands list gcc 4.5 does not load the parameters into registers before calling this function but the inline assembly assumes valid addresses inside this function. This breaks the code because r0 and r1 are invalid when execution enters v4wb_copy_user_page () Also the constant needs to be used as third input operand so account for that as well. Tested on qemu arm. CC: <stable@kernel.org> Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * Merge branch 'fix' of ↵Russell King2010-06-0842-293/+1326
| |\ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
| | * [ARM] pxa/spitz: Correctly register WM8750Marek Vasut2010-05-311-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | This patch registers the WM8750 codec on a proper place on the SPITZ machine after the WM8750 driver was converted to new API. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
| | * [ARM] pxa/palmtc: storage class should be before const qualifierTobias Klauser2010-05-311-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
| * | ARM: 6166/1: Proper prefetch abort handling on pre-ARMv6Anfei2010-06-081-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instruction faults on pre-ARMv6 CPUs are interpreted as a 'translation fault', but do_translation_fault doesn't handle well if user mode trying to run instruction above TASK_SIZE, and result in the infinite retry of that instruction. CC: <stable@kernel.org> Signed-off-by: Anfei Zhou <anfei.zhou@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | ARM: 6165/1: trap overflows on highmem pages from kmap_atomic when debuggingNicolas Pitre2010-06-081-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When CONFIG_DEBUG_HIGHMEM is used, the fixmap entry used for a highmem page by kmap_atomic() is always cleared by kunmap_atomic(). This helps find bad usages such as dereferences after the unmap, or overflow into the adjacent fixmap areas. But this debugging aid is completely bypassed when a kmap for the same page already exists as the kmap is reused instead. ON VIVT systems we have no choice but to reuse that kmap due to cache coherency issues, but on non VIVT systems we should always force the fixmap usage when debugging is active. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | ARM: 6152/1: ux500 make it possible to disable localtimersLinus Walleij2010-06-081-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Currently compilation of ux500 fails if you deselect the kernel feature for localtimers. Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | ARM: 6146/1: sa1111: Prevent deadlock in resume pathMarek Vašut2010-05-271-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch reorganises the sa1111_resume() function in a manner the spinlock happens after calling the sa1111_wake(). This fixes two bugs: 1) This function called sa1111_wake() which tried to claim the same spinlock the sa1111_resume() already claimed. This would result in certain deadlock. Original idea for this part: Russell King <rmk+kernel@arm.linux.org.uk> 2) The function didn't unlock the spinlock in case the chip didn't report correct ID. Original idea for this part: Julia Lawall <julia@diku.dk> Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | ARM: 6145/1: ux500 MTU clockrate correctionLinus Walleij2010-05-277-12/+167
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adjusts the clockrate for the MTU timer. On the different UX500 variants this rate is different. The platform can also have been set up at hardware initialization, bootloader or early init for different clock speeds. To have the clock framework available early so the timers can use them, the clock initialization for Nomadik and ux500 is moved to IRQ init time. A custom per-clock callback is added to handle special cases like this. This solves a user-visible bug: without this patch the current UX500 platforms will not be synchronized to wall-clock time and the platform will drift in time. Acked-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | ARM: 6144/1: TCM memory bug freeing bugLinus Walleij2010-05-271-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a bug in mm/init.c when freeing the TCM compile memory, this was being referred to as a char * which is incorrect: this will dereference the pointer and feed in the value at the location instead of the address to it. Change it to a plain char and use &(char) to reference it. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Cc: <stable@kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | ARM: VFP: Fix vfp_put_double() for d16-d31Russell King2010-05-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | vfp_put_double() takes the double value in r0,r1 not r1,r2. Reported-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> Cc: <stable@kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | msm: dma: add completion.h headerDaniel Walker2010-06-071-0/+1
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | At some point this was exposed (not sure how), linux-2.6/arch/arm/mach-msm/dma.c:92: error: field 'complete' has incomplete type linux-2.6/arch/arm/mach-msm/dma.c: In function 'dmov_exec_cmdptr_complete_func': linux-2.6/arch/arm/mach-msm/dma.c:108: error: implicit declaration of function 'complete' linux-2.6/arch/arm/mach-msm/dma.c: In function 'msm_dmov_exec_cmd': linux-2.6/arch/arm/mach-msm/dma.c:120: error: implicit declaration of function 'init_completion' linux-2.6/arch/arm/mach-msm/dma.c:123: error: implicit declaration of function 'wait_for_completion' and the fix is just to add the header. Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
* | Merge branch 'for-next' of ↵Linus Torvalds2010-05-304-3/+82
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (47 commits) mfd: Rename twl5031 sih modules mfd: Storage class for timberdale should be before const qualifier mfd: Remove unneeded and dangerous clearing of clientdata mfd: New AB8500 driver gpio: Fix inverted rdc321x gpio data out registers mfd: Change rdc321x resources flags to IORESOURCE_IO mfd: Move pcf50633 irq related functions to its own file. mfd: Use threaded irq for pcf50633 mfd: pcf50633-adc: Fix potential race in pcf50633_adc_sync_read mfd: Fix pcf50633 bitfield logic in interrupt handler gpio: rdc321x needs to select MFD_CORE mfd: Use menuconfig for quicker config editing ARM: AB3550 board configuration and irq for U300 mfd: AB3550 core driver mfd: AB3100 register access change to abx500 API mfd: Renamed ab3100.h to abx500.h gpio: Add TC35892 GPIO driver mfd: Add Toshiba's TC35892 MFD core mfd: Delay to mask tsc irq in max8925 mfd: Remove incorrect wm8350 kfree ...
| * | mfd: New AB8500 driverRabin Vincent2010-05-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a new driver to support the AB8500 Power Management chip, replacing the current AB4500. The new driver replaces the old one, instead of an incremental modification, because this is a substantial overhaul including: - Split of the driver into -core and -spi portions, to allow another interface layer to be added - Addition of interrupt support - Switch to MFD core API for handling subdevices - Simplification of the APIs to remove a redundant block parameter - Rename of the APIs and macros from ab4500_* to ab8500_* - Rename of the files from ab4500* to ab8500* - Change of the driver name from ab4500 to ab8500 Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | ARM: AB3550 board configuration and irq for U300Mattias Wallin2010-05-282-0/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the i2c board configuration needed for the Mixed Signal chip AB3550. It also adds the irq numbers needed for the irq_chip implementation. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | mfd: Renamed ab3100.h to abx500.hLinus Walleij2010-05-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The goal here is to make way for a more general interface for the analog baseband chips ab3100 ab3550 ab550 and future chips. This patch have been divided into two parts since both changing name and content of a file is not recommended in git. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | davinci: da850 TPS6507x touch screen driver board dataTodd Fischer2010-05-281-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The touch screen controller in the TPS6507x chip needs values that are dependent on the characteristics of the touch screen hardware being used in the board design. In addition, the board provides version information that is exposed via the kernel input sub-system. Signed-off-by: Todd Fischer <todd.fischer@ridgerun.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | mfd: Add tps6507x board data structureTodd Fischer2010-05-281-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add mfd structure which refrences sub-driver initialization data. For example, for a giving hardware implementation, the voltage regulator sub-driver initialization data provides the mapping betten a voltage regulator and what the output voltage is being used for. Signed-off-by: Todd Fischer <todd.fischer@ridgerun.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | | Merge branch 'next' of ↵Linus Torvalds2010-05-306-1/+283
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: DMAENGINE: DMA40 U8500 platform configuration DMA: PL330: Add dma api driver
| * | | DMAENGINE: DMA40 U8500 platform configurationLinus Walleij2010-05-276-1/+283
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This completes the DMA40 support with the platform-specific configuration for U8500/DB8500. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Reviewed-by: Alessandro Rubini <rubini@unipv.it> Cc: STEricsson_nomadik_linux@list.st.com Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> [fixed up dma40_{tx|rx}_map declaration/initialization] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* | | | ARM: Merge for-2635/defconfig3Ben Dooks2010-05-282-22/+403
|\ \ \ \ | | | | | | | | | | | | | | | Merge branch 'for-2635/defconfig3' into for-linus/2635-updates
| * | | | ARM: s3c2410_defconfig: Add new machinesBen Dooks2010-05-281-8/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the SMDK2416, and the GTA02 to the list of machines that are included in the s3c2410_defconfig. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
| * | | | ARM: s3c6400_defconfig: Add framebuffer and basic LCDBen Dooks2010-05-281-2/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the framebuffer driver and some basic LCD configurations that should be suitable for the SMDK boards. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
OpenPOWER on IntegriCloud