summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-u300
Commit message (Collapse)AuthorAgeFilesLines
* ARM: 6297/1: move U300 timer to dynamic clock lookupLinus Walleij2010-08-102-10/+13
| | | | | | | | | | This moves the U300 timer code to look up its clock rate from the clock framework as is apropriate and also switches it over to use the generic code for *calc_mult_shift() on clock source and clock event. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 6296/1: clock U300 intcon and timer properlyLinus Walleij2010-08-104-24/+17
| | | | | | | | | This removes the quirks to clock the U300 VIC and timer by custom hooks and moves the control out to the clock framework where it belongs. This is possible now that clocks are available early. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 6295/1: fix U300 apb_pclk splitLinus Walleij2010-08-103-67/+57
| | | | | | | | | | | | | | | | This fixes a regression due to the new apb_pclk stuff in the U300 platform, makes it run by splitting the apb clock off the single UART clocks. For the MMCI and PL022 clocks we don't split them: these are actually hardwired to the same clock terminal and will thus simply have a double reference count and will be referenced twice. We also move clock registration to .init_irq() so they are available early enough for probing to be successful and remove the earlier quirk to clock primecells during PrimeCell registration. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 6306/1: fix inverted MMC card detect in U300Linus Walleij2010-08-101-4/+4
| | | | | | | | This converts the U300 to uninverted logic for MMCI card detect, fixing a regression in the current tree. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge branch 'master' into for-nextJiri Kosina2010-08-043-8/+23
|\
| * Merge branch 'misc' into develRussell King2010-07-311-8/+0
| |\ | | | | | | | | | | | | Conflicts: arch/arm/mm/init.c
| | * ARM: 6225/1: make TCM allocation static and common for all archsLinus Walleij2010-07-271-8/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This changes the TCM handling so that a fixed area is reserved at 0xfffe0000-0xfffeffff for TCM. This areas is used by XScale but XScale does not have TCM so the mechanisms are mutually exclusive. This change is needed to make TCM detection more dynamic while still being able to compile code into it, and is a must for the unified ARM goals: the current TCM allocation at different places in memory for each machine would be a nightmare if you want to compile a single image for more than one machine with TCM so it has to be nailed down in one place. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | |
| | \
| *-. \ Merge branches 'at91', 'ep93xx', 'kexec', 'iop', 'lmb', 'nomadik', 'nuc', ↵Russell King2010-07-312-0/+23
| |\ \ \ | | |_|/ | |/| | | | | | 'pl', 'spear' and 'versatile' into devel
| | | * ARM: AMBA: Add pclk definition for platforms using primecellsRussell King2010-07-221-0/+6
| | |/ | |/| | | | | | | | | | | | | | | | | | | Add a dummy clk definition for the APB pclk signal on all platforms using the AMBA bus infrastructure. This ensures that these platforms continue to work when the core amba bus code controls the APB pclk. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | * ARM: Convert platform reservations to use LMB rather than bootmemRussell King2010-07-271-2/+2
| | | | | | | | | | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | * ARM: Move platform memory reservations out of generic codeRussell King2010-07-161-0/+17
| |/ | | | | | | | | | | | | Move the platform specific bootmem memory reservations out of arch/arm/mm/mmu.c into their respective platform files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Removing dead MACH_U300_BS26Christoph Egger2010-07-201-7/+0
| | | | | | | | | | | | | | | | | | MACH_U300_BS26 doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | Merge branch 'master' into for-nextJiri Kosina2010-06-163-22/+63
|\ \ | |/
| * ARM: AB3550 board configuration and irq for U300Mattias Wallin2010-05-282-0/+62
| | | | | | | | | | | | | | | | | | | | This patch adds the i2c board configuration needed for the Mixed Signal chip AB3550. It also adds the irq numbers needed for the irq_chip implementation. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * mfd: Renamed ab3100.h to abx500.hLinus Walleij2010-05-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The goal here is to make way for a more general interface for the analog baseband chips ab3100 ab3550 ab550 and future chips. This patch have been divided into two parts since both changing name and content of a file is not recommended in git. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * Merge branch 'next' of ↵Linus Torvalds2010-05-211-21/+0
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: DMAENGINE: extend the control command to include an arg async_tx: trim dma_async_tx_descriptor in 'no channel switch' case DMAENGINE: DMA40 fix for allocation of logical channel 0 DMAENGINE: DMA40 support paused channel status dmaengine: mpc512x: Use resource_size DMA ENGINE: Do not reset 'private' of channel ioat: Remove duplicated devm_kzalloc() calls for ioatdma_device ioat3: disable cacheline-unaligned transfers for raid operations ioat2,3: convert to producer/consumer locking ioat: convert to circ_buf DMAENGINE: Support for ST-Ericssons DMA40 block v3 async_tx: use of kzalloc/kfree requires the include of slab.h dmaengine: provide helper for setting txstate DMAENGINE: generic channel status v2 DMAENGINE: generic slave control v2 dma: timb-dma: Update comment and fix compiler warning dma: Add timb-dma DMAENGINE: COH 901 318 fix bytesleft DMAENGINE: COH 901 318 rename confusing vars
| | * Merge branch 'ioat' into dmaengineDan Williams2010-05-172-0/+2
| | |\
| | * | DMAENGINE: generic channel status v2Linus Walleij2010-03-261-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert the device_is_tx_complete() operation on the DMA engine to a generic device_tx_status()operation which can return three states, DMA_TX_RUNNING, DMA_TX_COMPLETE, DMA_TX_PAUSED. [dan.j.williams@intel.com: update for timberdale] Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Maciej Sosnowski <maciej.sosnowski@intel.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Li Yang <leoli@freescale.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: Magnus Damm <damm@opensource.se> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Joe Perches <joe@perches.com> Cc: Roland Dreier <rdreier@cisco.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
| | * | DMAENGINE: generic slave control v2Linus Walleij2010-03-261-14/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert the device_terminate_all() operation on the DMA engine to a generic device_control() operation which can now optionally support also pausing and resuming DMA on a certain channel. Implemented for the COH 901 318 DMAC as an example. [dan.j.williams@intel.com: update for timberdale] Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Maciej Sosnowski <maciej.sosnowski@intel.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Li Yang <leoli@freescale.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: Magnus Damm <damm@opensource.se> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Joe Perches <joe@perches.com> Cc: Roland Dreier <rdreier@cisco.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* | | | fix typos concerning "initiali[zs]e"Uwe Kleine-König2010-06-161-1/+1
|/ / / | | | | | | | | | | | | Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | Merge branch 'devel-stable' into develRussell King2010-05-172-0/+2
|\ \ \ | | |/ | |/| | | | | | | | | | | | | Conflicts: arch/arm/Kconfig arch/arm/include/asm/system.h arch/arm/mm/Kconfig
| * | include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-302-0/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* | ARM: 6034/1: ARM: U300: set f_max to 24 MHz for MMCILinus Walleij2010-04-141-0/+1
| | | | | | | | | | | | | | | | This employs the frequency setting mechanism introduced to the MMCI to specify that this system can actually be clocked at 24 MHz. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | ARM: 6032/1: ARM: MMCI: support 8bit mode on the ST Micro versionLinus Walleij2010-04-141-1/+1
|/ | | | | | | | | | This adds support for an 8bit wide bus to the card (data lines MCIDAT0 through 7 exist) on the ST Micro version and alters the U300 platform to support this. Also add some ST_ prefix to the ST-specific registers. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge branch 'for-next' into for-linusJiri Kosina2010-03-082-3/+3
|\ | | | | | | | | | | | | | | | | Conflicts: Documentation/filesystems/proc.txt arch/arm/mach-u300/include/mach/debug-macro.S drivers/net/qlge/qlge_ethtool.c drivers/net/qlge/qlge_main.c drivers/net/typhoon.c
| * tree-wide: Assorted spelling fixesDaniel Mack2010-02-092-3/+3
| | | | | | | | | | | | | | | | | | | | | | In particular, several occurances of funny versions of 'success', 'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address', 'beginning', 'desirable', 'separate' and 'necessary' are fixed. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Joe Perches <joe@perches.com> Cc: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | Merge branch 'next' of ↵Linus Torvalds2010-03-041-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (28 commits) ioat: cleanup ->timer_fn() and ->cleanup_fn() prototypes ioat3: interrupt coalescing ioat: close potential BUG_ON race in the descriptor cleanup path ioat2: kill pending flag ioat3: use ioat2_quiesce() ioat3: cleanup, don't enable DCA completion writes DMAENGINE: COH 901 318 lli sg offset fix DMAENGINE: COH 901 318 configure channel direction DMAENGINE: COH 901 318 remove irq counting DMAENGINE: COH 901 318 descriptor pool refactoring DMAENGINE: COH 901 318 cleanups dma: Add MPC512x DMA driver Debugging options for the DMA engine subsystem iop-adma: redundant/wrong tests in iop_*_count()? dmatest: fix handling of an even number of xor_sources dmatest: correct raid6 PQ test fsldma: Fix cookie issues fsldma: Fix cookie issues dma: cases IPU_PIX_FMT_BGRA32, BGR32 and ABGR32 are the same in ipu_ch_param_set_size() dma: make Open Firmware device id constant ...
| * | DMAENGINE: COH 901 318 descriptor pool refactoringLinus Walleij2010-03-021-1/+1
| |/ | | | | | | | | | | | | | | This centralize some spread-out initialization of descriptors into one function and cleans up the error paths. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* | Merge branches 'clks' and 'pnx' into develRussell King2010-02-251-4/+1
|\ \
| * | ARM: Consolidate clks_register() and similarRussell King2010-02-121-4/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | Most machine classes want some way to register a block of clk_lookup structures, and most do it by implementing a clks_register() type function which walks an array, or by open-coding a loop. Consolidate all this into clkdev_add_table(). Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Merge branch 'misc2' into develRussell King2010-02-251-1/+1
|\ \
| * | ARM: 5928/1: Change type of VMALLOC_END to unsigned long.Fenkart/Bostandzhyan2010-02-151-1/+1
| |/ | | | | | | | | | | | | | | Makes it consistent with VMALLOC_START Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Merge branch 'tmpreg' into develRussell King2010-02-251-1/+1
|\ \ | | | | | | | | | | | | | | | Conflicts: arch/arm/Kconfig arch/arm/mach-ux500/include/mach/debug-macro.S
| * | ARM: 5910/1: ARM: Add tmp register for addruart and loadspTony Lindgren2010-02-121-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | Otherwise more complicated uart configuration won't be possible. We can use r1 for tmp register for both head.S and debug.S. NOTE: This patch depends on another patch to add the the tmp register into all debug-macro.S files. That can be done with: $ sed -i -e "s/addruart,rx|addruart, rx/addruart, rx, tmp/" arch/arm/*/include/*/debug-macro.S Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | ARM: 5958/1: ARM: U300: fix inverted clk round rateLinus Walleij2010-02-241-12/+12
| | | | | | | | | | | | | | | | | | The clk_round_rate() functions in the U300 clocking will always select the lowest clocking frequency due to inverted rounding comparisons. Fix this. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | ARM: 5956/1: misplaced parenthesesRoel Kluin2010-02-241-1/+1
| | | | | | | | | | | | | | | | The parentheses appear misplaced. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | ARM: 5935/1: [U300] Fix the DMA configurationLinus Walleij2010-02-141-18/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a few bugs in the DMA configuration for the COH 901 318 DMA engine used in U300. It also removes the directional parameter for each channel: separate DMA engine patches (submitted to the DMA engine maintainer) switches that mechanism over to using dynamic configuration of this, to handle bidirectional DMA channels. Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | ARM: 5895/2: Alter name of U300 watchdog resourceLinus Walleij2010-01-271-2/+2
| | | | | | | | | | | | | | | | | | This changes the bus name of the U300 watchdog from just "wdog" to "coh901327_wdog" which is used to match the corresponding driver. This makes the watchdog probe properly. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | ARM: 5852/1: Add COH 901 318 DMA driver platform config for U300Linus Walleij2010-01-272-0/+1108
|/ | | | | | | | This adds platform configuration for the COH 901 318 DMA driver for the U300 series mobile platforms. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge branch 'next' of ↵Linus Torvalds2009-12-161-0/+281
|\ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: ppc440spe-adma: adds updated ppc440spe adma driver iop-adma.c: use resource_size() dmaengine: clarify the meaning of the DMA_CTRL_ACK flag sh: stylistic improvements for the DMA driver dmaengine: fix dmatest to verify minimum transfer length and test buffer size sh: DMA driver has to specify its alignment requirements Add COH 901 318 DMA block driver v5
| * Add COH 901 318 DMA block driver v5Linus Walleij2009-11-191-0/+281
| | | | | | | | | | | | | | | | | | | | This patch adds support for the ST-Ericsson COH 901 318 DMA block, found in the U300 series platforms. It registers a DMA slave for device I/O and also a memcpy slave for memcpy. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* | Merge branch 'for-linus' of ↵Linus Torvalds2009-12-091-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits) tree-wide: fix misspelling of "definition" in comments reiserfs: fix misspelling of "journaled" doc: Fix a typo in slub.txt. inotify: remove superfluous return code check hdlc: spelling fix in find_pvc() comment doc: fix regulator docs cut-and-pasteism mtd: Fix comment in Kconfig doc: Fix IRQ chip docs tree-wide: fix assorted typos all over the place drivers/ata/libata-sff.c: comment spelling fixes fix typos/grammos in Documentation/edac.txt sysctl: add missing comments fs/debugfs/inode.c: fix comment typos sgivwfb: Make use of ARRAY_SIZE. sky2: fix sky2_link_down copy/paste comment error tree-wide: fix typos "couter" -> "counter" tree-wide: fix typos "offest" -> "offset" fix kerneldoc for set_irq_msi() spidev: fix double "of of" in comment comment typo fix: sybsystem -> subsystem ...
| * \ Merge branch 'for-next' into for-linusJiri Kosina2009-12-071-1/+1
| |\ \ | | | | | | | | | | | | | | | | | | | | Conflicts: kernel/irq/chip.c
| | * | tree-wide: fix misspelling of "definition" in commentsAdam Buchbinder2009-12-041-1/+1
| | |/ | | | | | | | | | | | | | | | | | | | | | "Definition" is misspelled "defintion" in several comments; this patch fixes them. No code changes. Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | |
| \ \
| \ \
| \ \
*---. \ \ Merge branches 'at91', 'ep93xx', 'etm', 'ks8695', 'nuc', 'u300' and 'u8500' ↵Russell King2009-12-054-60/+342
|\ \ \ \ \ | |_|_|/ / |/| | | / | | |_|/ | |/| | into devel
| | | * ARM: 5783/1: Make it possible for U300 LDO D to shut downLinus Walleij2009-11-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This changes the regulator platform config for U300 so that the LDO D regulator can change status and shut down the system and the pm_shutdown() hook in regulator.c starts working. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | | * ARM: 5725/2: U300 switch MMCI to use regulatorLinus Walleij2009-10-191-60/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This switches the U300 over from using a custom translate_vdd function (which was just flipping blind bits in the hardware) to using the regulator that actually controls the MMC voltage. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | | * ARM: 5724/1: U300 AB3100 boardinfo v5Linus Walleij2009-10-193-0/+337
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | This defines regulator platform data and board power regulator hogs for the ST-Ericsson U300 platform. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | ARM: 5787/1: U300 COH 901 331 fixesLinus Walleij2009-11-161-1/+1
|/ / | | | | | | | | | | | | | | | | | | | | | | | | This will fix some small issues with the COH 901 331 RTC driver: - Interrupt is disabled after alarm so that we don't fire multiple interrupts. - We return 0 from the coh901331_alarm_irq_enable() ridding a compile warning. - We alter the name in the U300 device registry to match that of the driver so they sucessfully resolve. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | ARM: 5731/2: Fix U300 generic GPIO, remove ifdefs from MMCI v3Linus Walleij2009-10-012-0/+11
| | | | | | | | | | | | | | | | | | The #ifdefs in the MMCI driver were erroneous and just masking a bug in the U300 generic GPIO implementation. This removes the ifdefs and fixes the U300 generic GPIO instead. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
OpenPOWER on IntegriCloud