summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-shmobile/include
Commit message (Collapse)AuthorAgeFilesLines
* ARM: mach-shmobile: cpuidle single/global and last_state fixesMagnus Damm2011-11-111-2/+2
| | | | | | | | | | | | | | | | | | The following commits break cpuidle on SH-Mobile ARM: 46bcfad cpuidle: Single/Global registration of idle states e978aa7 cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state This patch remedies these issues by up-porting the SH-Mobile code to fit with the above introduced framework changes. It is worth noting that the new code becomes significantly cleaner, so these framework changes are very welcome. At the same time this breakage could probably have been avoided by grepping for "last_state" and "cpuidle_register_driver". Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* ARM: mach-shmobile: sh73a0: add MMC data pin pull-upKuninori Morimoto2011-11-111-0/+8
| | | | | | | | | | | This patch adds MMC data pin pull-up option for pfc-sh73a0.c, and select it on ag5evm board. The MMC read/write will be error without this patch. Cc: Takashi YOSHII <takashi.yoshii.zj@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* ARM: mach-shmobile: sh73a0 and AG5EVM PINT supportMagnus Damm2011-11-051-0/+4
| | | | | | | | | | Support PINT on sh73a0 and AG5EVM using INTC PINT macros. With this patch applied the AG5EVM ethernet is handled through one of the chained sh73a0 PINT interrupt controllers. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* ARM: mach-shmobile: Add support for PINT though INTC macrosMagnus Damm2011-11-051-0/+51
| | | | | | | | Add a INTC_PINT() macro with various helper bits to allow SoCs like sh73a0 to suppor the PINT hardware using regular INTC tables. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* ARM: mach-shmobile: Break out INTC IRQ codeMagnus Damm2011-11-051-0/+195
| | | | | | | | | Add INTC_IRQ_PINS_16() and INTC_IRQ_PINS_32() to mach/intc.h. These macros define 16 or 32 external IRQ pins on a certain memory base address. Can be used with INTCA or INTCS. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* Merge branch 'master' of ↵Paul Mundt2011-11-045-28/+19
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into rmobile-latest
| * Merge branch 'devel-stable' of ↵Linus Torvalds2011-10-282-6/+0
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'devel-stable' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (178 commits) ARM: 7139/1: fix compilation with CONFIG_ARM_ATAG_DTB_COMPAT and large TEXT_OFFSET ARM: gic, local timers: use the request_percpu_irq() interface ARM: gic: consolidate PPI handling ARM: switch from NO_MACH_MEMORY_H to NEED_MACH_MEMORY_H ARM: mach-s5p64x0: remove mach/memory.h ARM: mach-s3c64xx: remove mach/memory.h ARM: plat-mxc: remove mach/memory.h ARM: mach-prima2: remove mach/memory.h ARM: mach-zynq: remove mach/memory.h ARM: mach-bcmring: remove mach/memory.h ARM: mach-davinci: remove mach/memory.h ARM: mach-pxa: remove mach/memory.h ARM: mach-ixp4xx: remove mach/memory.h ARM: mach-h720x: remove mach/memory.h ARM: mach-vt8500: remove mach/memory.h ARM: mach-s5pc100: remove mach/memory.h ARM: mach-tegra: remove mach/memory.h ARM: plat-tcc: remove mach/memory.h ARM: mach-mmp: remove mach/memory.h ARM: mach-cns3xxx: remove mach/memory.h ... Fix up mostly pretty trivial conflicts in: - arch/arm/Kconfig - arch/arm/include/asm/localtimer.h - arch/arm/kernel/Makefile - arch/arm/mach-shmobile/board-ap4evb.c - arch/arm/mach-u300/core.c - arch/arm/mm/dma-mapping.c - arch/arm/mm/proc-v7.S - arch/arm/plat-omap/Kconfig largely due to some CONFIG option renaming (ie CONFIG_PM_SLEEP -> CONFIG_ARM_CPU_SUSPEND for the arm-specific suspend code etc) and addition of NEED_MACH_MEMORY_H next to HAVE_IDE.
| | * Merge branch 'ppi-irq-core-for-rmk' of ↵Russell King2011-10-231-3/+0
| | |\ | | | | | | | | | | | | git://github.com/mzyngier/arm-platforms into devel-stable
| | | * ARM: gic: consolidate PPI handlingMarc Zyngier2011-10-231-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PPI handling is a bit of an odd beast. It uses its own low level handling code and is hardwired to the local timers (hence lacking a registration interface). Instead, switch the low handling to the normal SPI handling code. PPIs are handled by the handle_percpu_devid_irq flow. This also allows the removal of some duplicated code. Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: David Brown <davidb@codeaurora.org> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Brown <davidb@codeaurora.org> Tested-by: David Brown <davidb@codeaurora.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
| | * | Merge branch 'for-rmk' of git://linux-arm.org/linux-2.6-wd into devel-stableRussell King2011-09-161-0/+4
| | |\ \ | | | |/ | | | | | | | | | | | | Conflicts: arch/arm/mach-imx/mach-cpuimx27.c
| | * | ARM: mach-shmobile: Setup consistent dma size at boot timeJon Medhurst2011-08-221-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Jon Medhurst <tixy@yxit.co.uk> CC: Paul Mundt <lethal@linux-sh.org> CC: Magnus Damm <magnus.damm@gmail.com>
| * | | Merge branch 'gpio' of ↵Linus Torvalds2011-10-271-20/+4
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'gpio' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (43 commits) ARM: 7135/1: ep93xx: bring back missing <mach/gpio.h> ARM: 7104/1: plat-pxa: break out GPIO driver specifics ARM: 7103/1: plat-pxa: move PXA GPIO driver to GPIO subsystem ARM: 7042/3: mach-ep93xx: break out GPIO driver specifics ARM: 7101/1: arm/tegra: Replace <mach/gpio.h> with <mach/gpio-tegra.h> ARM: 7094/1: arm/tegra: Move EN_VDD_1V05_GPIO to board-harmony.h ARM: 7083/1: rewrite U300 GPIO to use gpiolib ARM: 7074/1: gpio: davinci: eliminate unused variable warnings ARM: 7063/1: Orion: gpio: add missing include of linux/types.h ARM: 7055/1: arm/tegra: mach/gpio.h: include linux/types.h to fix build ARM: 7054/1: arm/tegra: Delete custom gpio_to_irq, and irq_to_gpio ARM: 7053/1: gpio/tegra: Implement gpio_chip.to_irq ARM: 7052/1: gpio/tegra: Remove use of irq_to_gpio ARM: 7057/1: mach-pnx4008: rename GPIO header ARM: 7056/1: plat-nomadik: kill off <plat/gpio.h> ARM: 7050/1: mach-sa1100: delete irq_to_gpio() function ARM: 7049/1: mach-sa1100: move SA1100 GPIO driver to GPIO subsystem ARM: 7045/1: mach-lpc32xx: break out GPIO driver specifics ARM: 7044/1: mach-lpc32xx: move LPC32XX GPIO driver to GPIO subsystem ARM: 7043/1: mach-ixp2000: rename GPIO header ... Fix up trivial conflicts in arch/arm/mach-u300/Kconfig manually
| | * | | ARM: gpio: make trivial GPIOLIB implementation the defaultRussell King2011-08-121-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rather than marking the mach/gpio.h header files which want to use the trivial GPIOLIB implementation, mark those which do not want to use it instead. This means that by default, you get the trivial implementation and only have to do something extra if you need to. This should encourage the use of the trivial default implementation. As an additional bonus, several gpio.h header files become empty. Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Tested-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | * | | ARM: gpio: consolidate gpio_to_irqRussell King2011-08-121-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many of the gpio_to_irq implementations use the gpiolib version of this function. Provide the standard gpiolib gpio_to_irq() for everyone, but allow platforms to override it if they wish. Add the neccessary overrides for those platforms which do not use the standard definition. Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | * | | ARM: gpio: consolidate trivial gpiolib implementationsRussell King2011-08-121-14/+1
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Consolidate 24 trivial gpiolib implementions out of mach/gpio.h into asm/gpio.h. This is basically the include of asm-generic/gpio.h and the definition of gpio_get_value, gpio_set_value, and gpio_cansleep as described in Documentation/gpio.txt Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Tested-by: David Brown <davidb@codeaurora.org> Acked-by: David Brown <davidb@codeaurora.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | ARM: mach-shmobile: sh7372 A4R support (v4)Magnus Damm2011-10-221-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change adds support for the sh7372 A4R power domain. The sh7372 A4R hardware power domain contains the SH CPU Core and a set of I/O devices including multimedia accelerators and I2C controllers. One special case about A4R is the INTCS interrupt controller that needs to be saved and restored to keep working as expected. Also the LCDC hardware blocks are in a different hardware power domain but have their IRQs routed only through INTCS. So as long as LCDCs are active we cannot power down INTCS because that would risk losing interrupts. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
| * | | ARM: mach-shmobile: sh7372 A3SP support (v4)Magnus Damm2011-10-221-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change adds support for the sh7372 A3SP power domain. The sh7372 A3SP hardware power domain contains a wide range of I/O devices. The list of I/O devices include SCIF serial ports, DMA Engine hardware, SD and MMC controller hardware, USB controllers and I2C master controllers. This patch adds the A3SP low level code which powers the hardware power domain on and off. It also ties in platform devices to the pm domain support code. It is worth noting that the serial console is hooked up to SCIFA0 on most sh7372 boards, and the SCIFA0 port is included in the A3SP hardware power domain. For this reason we cannot output debug messages from the low level power control code in the case of A3SP. QoS support is needed in drivers before we can enable the A3SP power control on the fly. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
| * | | Merge branch 'pm-fixes' into pm-domainsRafael J. Wysocki2011-09-261-0/+4
| |\ \ \ | | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | Merge commit e8b364b88cc4001b21c28c1ecf1e1e3ffbe162e6 (PM / Clocks: Do not acquire a mutex under a spinlock) fixing a regression in drivers/base/power/clock_ops.c. Conflicts: drivers/base/power/clock_ops.c
| * | | ARM: mach-shmobile: sh7372 A3SM supportMagnus Damm2011-09-251-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds sh7372 A3SM power domain support. The sh7372 A3SM hardware power domain contains the ARM Cortex-A8 CPU Core including L2 cache. This sleep mode can be seen as a one step deeper sleep mode from the already existing Core Standby mode. To wake up from A3SM sleep only a few wakeup sources are supported - so the regular INTC controller will not be able to help us unfortunately. The code in this patch will enter A3SM sleep via the regular Suspend-to-RAM interface in the case of only wakeups supported by A3SM are enabled. If unsupported wakeups are enabled then Core Standby will be used instead. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
| * | | ARM: mach-shmobile: sh7372 generic suspend/resume supportMagnus Damm2011-09-251-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert the sh7372 Core Standby code to make use of the new generic ARM cpu suspend/resume code. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
| * | | ARM / shmobile: Make A3RV be a subdomain of A4LC on SH7372Rafael J. Wysocki2011-08-251-0/+3
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | Instead of coding the undocumented dependencies between power domains A3RV and A4LC on SH7372 directly into the low-level power up/down routines, make A3RV be a subdomain of A4LC, which will cause the same dependecies to hold. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Magnus Damm <damm@opensource.se>
* | | Merge branch 'rmobile-fixes-for-linus' into rmobile-latestPaul Mundt2011-08-291-0/+4
|\ \ \ | | |/ | |/|
| * | Merge branch 'rmobile/dma' into rmobile-fixes-for-linusPaul Mundt2011-08-291-0/+4
| |\ \ | | |/ | |/|
| | * ARM: mach-shmobile: sh7372: Add USB-DMAC supportKuninori Morimoto2011-06-211-0/+4
| | | | | | | | | | | | | | | Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | | ARM: mach-shmobile: sh73a0 PFC pull-up support for SDHI0+2Magnus Damm2011-08-291-0/+13
|/ / | | | | | | | | | | | | | | | | | | | | Extend the existing sh73a0 PFC code with pull-ups for SDHI0 and SDHI2. Without this patch only SDHI1 has pull-up support on sh73a0. Needed by boards that make use of the internal pull-up resistor support built in the SoC. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2011-07-242-0/+37
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (237 commits) ARM: 7004/1: fix traps.h compile warnings ARM: 6998/2: kernel: use proper memory barriers for bitops ARM: 6997/1: ep93xx: increase NR_BANKS to 16 for support of 128MB RAM ARM: Fix build errors caused by adding generic macros ARM: CPU hotplug: ensure we migrate all IRQs off a downed CPU ARM: CPU hotplug: pass in proper affinity mask on IRQ migration ARM: GIC: avoid routing interrupts to offline CPUs ARM: CPU hotplug: fix abuse of irqdesc->node ARM: 6981/2: mmci: adjust calculation of f_min ARM: 7000/1: LPAE: Use long long printk format for displaying the pud ARM: 6999/1: head, zImage: Always Enter the kernel in ARM state ARM: btc: avoid invalidating the branch target cache on kernel TLB maintanence ARM: ARM_DMA_ZONE_SIZE is no more ARM: mach-shark: move ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-sa1100: move ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-realview: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-pxa: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-ixp4xx: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-h720x: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-davinci: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ...
| * | ARM: 6886/1: mmc, Add zboot from eSD support for SuperH Mobile ARMSimon Horman2011-06-292-0/+37
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows a ROM-able zImage to be written to eSD and for SuperH Mobile ARM to boot directly from the SDHI hardware block. This is achieved by the MaskROM loading the first portion of the image into MERAM and then jumping to it. This portion contains loader code which copies the entire image to SDRAM and jumps to it. From there the zImage boot code proceeds as normal, uncompressing the image into its final location and then jumping to it. Cc: Paul Mundt <lethal@linux-sh.org> Acked-by: Magnus Damm <magnus.damm@gmail.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | ARM / shmobile: Use pm_genpd_poweroff_unused()Rafael J. Wysocki2011-07-131-1/+0
| | | | | | | | | | | | | | | | Make shmobile use pm_genpd_poweroff_unused() instead of the open-coded powering off PM domains without devices in use. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Magnus Damm <damm@opensource.se>
* | ARM: mach-shmobile: Runtime PM late init callbackMagnus Damm2011-07-101-0/+1
| | | | | | | | | | | | | | | | | | Add a mach-shmobile specific callback for SoC-specific code to hook into. By having the late_initcall() in a common place we can have multi-SoC/board support in the same kernel binary. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* | ARM: mach-shmobile: sh7372 D4 supportMagnus Damm2011-07-101-0/+1
| | | | | | | | | | | | | | | | Add support for the sh7372 D4 power domain. This power domain contains the Coresight-ETM hardware block. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* | ARM: mach-shmobile: sh7372 A4MP supportKuninori Morimoto2011-07-101-0/+1
| | | | | | | | | | | | | | | | | | Add support for the sh7372 A4MP power domain and hook up the FSI/SPU2 device. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* | ARM: mach-shmobile: sh7372 A3SG supportMagnus Damm2011-07-021-0/+1
| | | | | | | | | | | | | | | | Add support for the sh7372 A3SG power domain. This domain contains the SGX hardware block, but there is no open source driver available. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* | ARM: mach-shmobile: sh7372 A3RI supportMagnus Damm2011-07-021-0/+1
| | | | | | | | | | | | | | | | Add support for the sh7372 A3RI power domain. This domain contains the ISP hardware block, but there is no driver available. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* | ARM: mach-shmobile: sh7372 A3RV supportMagnus Damm2011-07-021-0/+1
| | | | | | | | | | | | | | | | Add support for the sh7372 A3RV power domain and hook up the VPU device. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* | ARM / shmobile: Support for I/O power domains for SH7372 (v9)Rafael J. Wysocki2011-07-021-0/+24
|/ | | | | | | | Use the generic power domains support introduced by the previous patch to implement support for power domains on SH7372. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Paul Mundt <lethal@linux-sh.org>
* ARM: mach-shmobile: sh73a0: mark DMA slave ID 0 as invalidMagnus Damm2011-05-251-0/+1
| | | | | | | | This makes it possible to leave DMA slave IDs in the platform data at default 0 value without hitting DMA channel allocation error paths. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* ARM: mach-shmobile: mark DMA slave ID 0 as invalidGuennadi Liakhovetski2011-05-251-0/+1
| | | | | | | | This makes it possible to leave DMA slave IDs in the platform data at default 0 value without hitting DMA channel allocation error paths. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* ARM: mach-shmobile: sh73a0 DMA Engine support for SY-DMACMagnus Damm2011-05-251-0/+29
| | | | | | | | Add SY-DMAC support via shdma.c to the sh73a0 SoC including slave ids, platform data and clock bindings. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* ARM: mach-shmobile: CPUIdle supportMagnus Damm2011-05-251-0/+3
| | | | | | | | | | | | This patch adds a shared SH-Mobile ARM specific CPUIdle implementation supporting WFI only at this point. It serves as a common point for late registration of the arch-specific CPUIdle code, and supports adding extra sleep modes using the callback shmobile_cpuidle_setup() together with shmobile_cpuidle_modes[]. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* ARM: mach-shmobile: sh7372 Core Standby Suspend-to-RAMMagnus Damm2011-05-251-0/+3
| | | | | | | | | | | | | | | Add sh7372 Core Standby sleep mode support and tie it in with the shared SH-Mobile ARM suspend code. The Core Standby mode is the lightest sh7372-specific sleep mode, cutting power to the ARM core excluding the L2 cache. Any interrupt source can be used for wakeups. The low level portion of this code is based on the TI OMAP sleep code in sleep34xx.S, thanks to them. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* ARM: mach-shmobile: Suspend-to-RAM supportMagnus Damm2011-05-251-0/+1
| | | | | | | | | | This patch adds a simple Suspend-to-RAM implementation for SH-Mobile ARM. The struct shmobile_suspend_ops are kept global to allow cpu-specific code to override the callbacks if needed. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* ARM: mach-shmobile: ap4evb, mackerel: fixup scif initialisation for zbootSimon Horman2011-05-242-4/+2
| | | | | | | | | | | | | | | * Set receive enable and transmit enable bits of SCASCR0 (E6C400089). Values previously written to this register was bogus. Curiously earlyprintk works with the previous code. * Remove duplicate initialisation of GPIO port 152, SCIFA0_TXD (0xE6053098). This should have no effect other than to very slightly reduce the amount of code. Reported-by: Magnus Damm <magnus.damm@gmail.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
*-. Merge branches 'consolidate-clksrc', 'consolidate-flash', ↵Russell King2011-05-231-16/+0
|\ \ | | | | | | | | | 'consolidate-generic', 'consolidate-smp', 'consolidate-stmp' and 'consolidate-zones' into consolidate
| | * ARM: consolidate SMP cross call implementationRussell King2011-05-231-16/+0
| |/ | | | | | | | | | | | | | | Rather than having each platform class provide a mach/smp.h header for smp_cross_call(), arrange for them to register the function with the core ARM SMP code instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | ARM: mach-shmobile: Correctly check for CONFIG_MACH_MACKERELSimon Horman2011-04-062-2/+2
|/ | | | | | | | | I made a bit of a thinko when adding Mackerel to the boards that support zboot using MMCIF. Reported-by: Magnus Damm <magnus.damm@gmail.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* mmc, ARM: Rename SuperH Mobile ARM zboot helpersSimon Horman2011-03-253-16/+15
| | | | | | | | These headers and helpers will also be used for SDHI boot so the mmcif name will start to make a lot less sense. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* Merge branch 'p2v' into develRussell King2011-03-161-1/+1
|\ | | | | | | | | | | Conflicts: arch/arm/kernel/module.c arch/arm/mach-s5pv210/sleep.S
| * ARM: P2V: separate PHYS_OFFSET from platform definitionsRussell King2011-02-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This uncouple PHYS_OFFSET from the platform definitions, thereby facilitating run-time computation of the physical memory offset. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Magnus Damm <damm@opensource.se> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| |
| \
*-. \ Merge branches 'at91', 'ep93xx', 'errata', 'footbridge', 'fncpy', 'gemini', ↵Russell King2011-03-165-10/+96
|\ \ \ | |_|/ |/| | | | | 'irqdata', 'pm', 'sh', 'smp', 'spear', 'ux500' and 'via' into devel
| | * ARM: mach-shmobile: mackerel: fixup memory initialize for zbootKuninori Morimoto2011-02-151-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | Current makerel had issue which couldn't boot sometimes. This patch fixup it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
OpenPOWER on IntegriCloud