summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/board-h4.c
Commit message (Collapse)AuthorAgeFilesLines
* ARM: OMAP2: Remove legacy USB FS supportTony Lindgren2012-06-041-13/+0
| | | | | | | | | | | | | | | | | | | | | | | | The FS (Full Speed) USB controller is available on 2420 and 2430, but not being used. Out of the 2420 based boards only Nokia N8X0 are seeing active development and they have external HS (High Speed) TUSB controller. On omap 2430sdp there is MUSB HS controller, so there's no need to use the legacy USB FS controller. That leaves only H4 and Apollon boards that could use the FS USB controller. As both H4 and Apollon boards are old proprietary development boards, it's unlikely that we have any active developers working on those boards using the USB. So remove the FS USB support for omap2 machines. Patches are welcome if somebody wants to instead fix it all up to the current standards. Cc: linux-usb@vger.kernel.org Cc: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: omap2: use machine specific hook for late initShawn Guo2012-05-081-0/+1
| | | | | Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP: boards: Fix OMAP_GPIO_IRQ usage with gpio_to_irq()Tarun Kanti DebBarma2012-03-291-1/+1
| | | | | | | | | | | | | | | The following commits change gpio-omap to use dynamic IRQ allocation: 25db711 gpio/omap: Fix IRQ handling for SPARSE_IRQ 384ebe1 gpio/omap: Add DT support to GPIO driver With dynamic allocation of IRQ the usage of OMAP_GPIO_IRQ is no longer valid. We must be using gpio_to_irq() instead. Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'restart' into for-linusRussell King2012-01-051-0/+1
|\ | | | | | | | | | | | | | | Conflicts: arch/arm/mach-exynos/cpu.c The changes to arch/arm/mach-exynos/cpu.c were moved to mach-exynos/common.c.
| * ARM: restart: omap: use new restart hookRussell King2012-01-051-0/+1
| | | | | | | | | | | | | | | | Hook these platforms restart code into the new restart hook rather than using arch_reset(). Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Merge branch 'irqchip-consolidation' of ↵Russell King2011-11-211-0/+1
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into devel-stable Conflicts: arch/arm/mach-omap2/board-4430sdp.c arch/arm/mach-omap2/board-omap4panda.c arch/arm/mach-omap2/include/mach/omap4-common.h arch/arm/plat-omap/include/plat/irqs.h The changes to omap4-common.h were moved to arch/arm/mach-omap2/common.h and the other trivial conflicts resolved. The now empty ifdef in irqs.h was also eliminated.
| * ARM: omap2plus: convert to CONFIG_MULTI_IRQ_HANDLERMarc Zyngier2011-11-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert the omap2plus platforms to be using CONFIG_MULTI_IRQ_HANDLER. Each machine is modified to provide either omap2_intc_handle_irq(), omap3_intc_handle_irq() or gic_handle_irq(). This allows for a major cleanup, removing the MULTI_OMAP setup from the interrupt path. Tested on both Panda and IGEPv2 (single kernel image) Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* | ARM: 7159/1: OMAP: Introduce local common.h filesTony Lindgren2011-11-171-1/+1
|/ | | | | | | | | | | As suggested by Russell King - ARM Linux <linux@arm.linux.org.uk>, there's no need to keep local prototypes in non-local headers. Add mach-omap1/common.h and mach-omap2/common.h and move the local prototypes there from plat/common.h and mach/omap4-common.h. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: OMAP2: Fix H4 matrix keyboard warningTony Lindgren2011-11-041-53/+69
| | | | | | | | | | | Convert to use matrix keyboard to remove the warning "Please update the board to use matrix-keypad driver". Based on similar setup in palmtc.c. Note that this patch is compile tested only because of lack of working hardware. Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'next/fixes' into next/cleanupArnd Bergmann2011-10-311-2/+1
|\ | | | | | | | | | | | | | | | | Conflicts: arch/arm/mach-mxs/include/mach/gpio.h arch/arm/plat-mxc/include/mach/gpio.h drivers/video/omap/lcd_apollon.c drivers/video/omap/lcd_ldp.c drivers/video/omap/lcd_overo.c
| * Merge branch 'depends/rmk/memory_h' into next/fixesArnd Bergmann2011-10-311-1/+1
| |\ | | | | | | | | | | | | | | | Fix up all conflicts between the memory.h cleanup and bug fixes. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | ARM: gpio: convert includes of mach/gpio.h and asm/gpio.h to linux/gpio.hRussell King2011-08-081-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | Convert arch/arm includes of mach/gpio.h and asm/gpio.h to linux/gpio.h before we start consolidating the individual platform implementations of the gpio header files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | Merge branch 'depends/omap2_dss' into next/cleanupArnd Bergmann2011-10-311-16/+26
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Omap cleanups conflicted with omap2_dss work in a nontrivial way, this is the most logical fixup. Conflicts: arch/arm/mach-omap2/board-2430sdp.c arch/arm/mach-omap2/board-4430sdp.c arch/arm/mach-omap2/board-apollon.c arch/arm/mach-omap2/board-h4.c arch/arm/mach-omap2/board-ldp.c arch/arm/mach-omap2/board-rx51.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | OMAP: H4: Port the display driver to new DSS2Tomi Valkeinen2011-09-301-16/+26
| |/ / | | | | | | | | | | | | | | | | | | | | | Port the old omapfb panel driver to DSS2. This patch changes the board file only, the driver is ported in separate patch. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* | | Merge branch 'depends/rmk/devel-stable' into next/cleanupArnd Bergmann2011-10-081-1/+1
|\ \ \ | | |/ | |/|
| * | ARM: mach-omap2: convert boot_params to atag_offsetNicolas Pitre2011-08-211-1/+1
| |/ | | | | | | | | | | Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
* | ARM: OMAP2+: Remove custom init_irq for remaining boardsTony Lindgren2011-09-261-6/+1
| | | | | | | | | | | | | | | | | | | | | | With SoC specific timers, board specific init_irq is no longer needed. Earlier this was still needed to initialize the gptimer12 on Beagle based boards. Also convert board-h4.c to use omap2_init_irq accidentally did not get converted earlier. Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: OMAP2+: Use SoC specifc map_ioTony Lindgren2011-09-261-7/+1
| | | | | | | | | | | | | | There's no longer any need for the board specific map_io. Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: OMAP: Introduce SoC specific early_initTony Lindgren2011-08-241-6/+1
| | | | | | | | | | | | | | | | | | | | | | Introduce them for each omap variant and just make them all call omap2_init_common_infrastructure for now. Do this for each board-*.c file except for board-generic and board-omap3beagle as they use the same machine ID for multiple SoCs. No functional changes. Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: OMAP: Move omap2_init_common_devices out of init_earlyTony Lindgren2011-08-241-1/+1
|/ | | | | | | | | | | | | | There's no need to call omap2_init_common_devices from init_early. It no longer does anything else except reprogram the memory timings for some boards, so it's better to do it later so we have a chance to get console messages if something goes wrong. Move it to happen after omap_serial_init gets called. And while patching it anyways, rename it to omap_sdrc_init as suggested by Benoit Cousson <b-cousson@ti.com>. Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: Set separate timer init functions to avoid cpu_is_omap testsTony Lindgren2011-06-201-1/+1
| | | | | | | | | | | | | | | | | | This is needed for the following patches so we can initialize the rest of the hardware timers later on. As with the init_irq calls, there's no need to do cpu_is_omap calls during the timer init as we only care about the major omap generation. This means that we can initialize the sys_timer with the .timer entries alone. Note that for now we just set stubs for the various sys_timer entries that will get populated in a later patch. The following patches will also remove the omap_dm_timer_init calls and change the init for the rest of the hardware timers to happen with an arch_initcall. Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
* omap: Use separate init_irq functions to avoid cpu_is_omap tests earlyTony Lindgren2011-06-161-1/+1
| | | | | | | | | | | | | This allows us to remove cpu_is_omap calls from init_irq functions. There should not be any need for cpu_is_omap calls as at this point. During the timer init we only care about SoC generation, and not about subrevisions. The main reason for the patch is that we want to initialize only minimal omap specific code from the init_early call. Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
* omap: Fix H4 init_irq to not call h4_init_flashTony Lindgren2011-03-101-1/+1
| | | | | | | | There should be no reason to call h4_init_flash this early. It causes problems as things are not yet initialized. Tested-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap2+: Minimize board specific init_early callsTony Lindgren2011-02-251-2/+3
| | | | | | | We should only call init_common_infrastructure and init_common_devices from init_early. Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2: use early init hookRussell King - ARM Linux2011-02-141-2/+7
| | | | | | | | Move non-mapping and non-irq initialization code out of .map_io and .init_irq respectively into the new init_early hook. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'integration-2.6.38-for-tony' of git://git.pwsan.com/linux-2.6 ↵Tony Lindgren2010-12-221-1/+2
|\ | | | | | | into omap-for-linus
| * OMAP2+: io: split omap2_init_common_hw()Paul Walmsley2010-12-211-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Split omap2_init_common_hw() into two functions. The first, omap2_init_common_infrastructure(), initializes the hwmod code and data, the OMAP PM code, and the clock code and data. The second, omap2_init_common_devices(), handles any other early device initialization that, for whatever reason, has not been or cannot be moved to initcalls or early platform devices. This patch is required for the hwmod postsetup patch, which allows board files to change the state that hwmods should be placed into at the conclusion of the hwmod _setup() function. For example, for a board whose creators wish to ensure watchdog coverage across the entire kernel boot process, code to change the watchdog's postsetup state will be added in the board-*.c file between the omap2_init_common_infrastructure() and omap2_init_common_devices() function calls. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com>
* | Keyboard: omap-keypad: use matrix_keypad.hJanusz Krzysztofik2010-12-221-30/+33
|/ | | | | | | | | | | | | | | | | | Most keypad drivers make use of the <linux/input/matrix_keypad.h> defined macros, structures and inline functions. Convert omap-keypad driver to use those as well, as suggested by a compile time warning, hardcoded into the OMAP <palt/keypad.h>. Created against linux-2.6.37-rc5. Tested on Amstrad Delta. Compile tested with omap1_defconfig and omap2plus_defconfig shrinked to board-h4. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Reviewed-by: Aaro Koskinen <aaro.koskinen@nokia.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: kill all section mismatch warning for omap2plus_defconfigBryan Wu2010-12-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch will kill following section mismatch warnings: WARNING: vmlinux.o(.text+0x24a00): Section mismatch in reference from the function zoom_twl_gpio_setup() to the (unknown reference) .init.data:(unknown) The function zoom_twl_gpio_setup() references the (unknown reference) __initdata (unknown). This is often because zoom_twl_gpio_setup lacks a __initdata annotation or the annotation of (unknown) is wrong. WARNING: vmlinux.o(.text+0x24bfc): Section mismatch in reference from the function cm_t35_twl_gpio_setup() to the (unknown reference) .init.data:(unknown) The function cm_t35_twl_gpio_setup() references the (unknown reference) __initdata (unknown). This is often because cm_t35_twl_gpio_setup lacks a __initdata annotation or the annotation of (unknown) is wrong. WARNING: vmlinux.o(.data+0x1d3e0): Section mismatch in reference from the variable h4_config to the (unknown reference) .init.data:(unknown) The variable h4_config references the (unknown reference) __initdata (unknown) If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: vmlinux.o(.data+0x1dc08): Section mismatch in reference from the variable sdp2430_config to the (unknown reference) .init.data:(unknown) The variable sdp2430_config references the (unknown reference) __initdata (unknown) If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: vmlinux.o(.data+0x1e1d8): Section mismatch in reference from the variable apollon_config to the (unknown reference) .init.data:(unknown) The variable apollon_config references the (unknown reference) __initdata (unknown) If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Signed-off-by: Bryan Wu <bryan.wu@canonical.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'devel-gpio' into omap-for-linusTony Lindgren2010-12-101-1/+0
|\
| * OMAP: GPIO: Implement GPIO as a platform deviceVaradarajan, Charulatha2010-12-071-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement GPIO as a platform device. GPIO APIs are used in machine_init functions. Hence it is required to complete GPIO probe before board_init. Therefore GPIO device register and driver register are implemented as postcore_initcalls. omap_gpio_init() does nothing now and this function would be removed in the next patch as it's usage is spread across most of the board files. Inorder to convert GPIO as platform device, modifications are required in clockxxxx_data.c file for OMAP1 so that device names can be used to obtain clock instead of getting clocks by name/NULL ptr. Use runtime pm APIs (pm_runtime_put*/pm_runtime_get*) for enabling or disabling the clocks, modify sysconfig settings and remove usage of clock FW APIs. Note 1: Converting GPIO driver to use runtime PM APIs is not done as a separate patch because GPIO clock names are different for various OMAPs and are different for some of the banks in the same CPU. This would need usage of cpu_is checks and bank id checks while using clock FW APIs in the gpio driver. Hence while making GPIO a platform driver framework, PM runtime APIs are used directly. Note 2: While implementing GPIO as a platform device, pm runtime APIs are used as mentioned above and modification is not done in gpio's prepare for idle/ resume after idle functions. This would be done in the next patch series and GPIO driver would be made to use dev_pm_ops instead of sysdev_class in that series only. Due to the above, the GPIO driver implicitly relies on CM_AUTOIDLE = 1 on its iclk for power management to work, since the driver never disables its iclk. This would be taken care in the next patch series (see Note 3 below). Refer to http://www.mail-archive.com/linux-omap@vger.kernel.org/msg39112.html for more details. Note 3: only pm_runtime_get_sync is called in gpio's probe() and pm_runtime_put* is never called. This is to make the implementation similar to the existing GPIO code. Another patch series would be sent to correct this. In OMAP3 and OMAP4 gpio's debounce clocks are optional clocks. They are enabled/ disabled whenever required using clock framework APIs TODO: 1. Cleanup the GPIO driver. Use function pointers and register offest pointers instead of using hardcoded values 2. Remove all cpu_is_ checks and OMAP specific macros 3. Remove usage of gpio_bank array so that only instance specific information is used in driver code 4. Rename 'method'/ avoid it's usage 5. Fix the non-wakeup gpios handling for OMAP2430, OMAP3 & OMAP4 6. Modify gpio's prepare for idle/ resume after idle functions to use runtime pm implentation. Signed-off-by: Charulatha V <charu@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Basak, Partha <p-basak2@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> [tony@atomide.com: updated for bank specific revision and updated boards] Signed-off-by: Tony Lindgren <tony@atomide.com>
* | arm: mach-omap2: remove NULL board_mux from board filesAaro Koskinen2010-12-021-2/+0
|/ | | | | | | | | If CONFIG_OMAP_MUX is not enabled, we can define board_mux in the header file instead of forcing every single board to define it. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> [tony@atomide.com: updated for combined board-zoom files] Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'omap-for-linus' of ↵Linus Torvalds2010-10-251-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (163 commits) omap: complete removal of machine_desc.io_pg_offst and .phys_io omap: UART: fix wakeup registers for OMAP24xx UART2 omap: Fix spotty MMC voltages ASoC: OMAP4: MCPDM: Remove unnecessary include of plat/control.h serial: omap-serial: fix signess error OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish omap: dma: Fix buffering disable bit setting for omap24xx omap: serial: Fix the boot-up crash/reboot without CONFIG_PM OMAP3: PM: fix scratchpad memory accesses for off-mode omap4: pandaboard: enable the ehci port on pandaboard omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set omap4: pandaboard: remove unused hsmmc definition OMAP: McBSP: Remove null omap44xx ops comment OMAP: McBSP: Swap CLKS source definition OMAP: McBSP: Fix CLKR and FSR signal muxing OMAP2+: clock: reduce the amount of standard debugging while disabling unused clocks OMAP: control: move plat-omap/control.h to mach-omap2/control.h OMAP: split plat-omap/common.c OMAP: McBSP: implement functional clock switching via clock framework OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c ... Fixed up trivial conflicts in arch/arm/mach-omap2/ {board-zoom-peripherals.c,devices.c} as per Tony
| * OMAP: control: move plat-omap/control.h to mach-omap2/control.hPaul Walmsley2010-10-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Only OMAP2+ platforms have the System Control Module (SCM) IP block. In the past, we've kept the SCM header file in plat-omap. This has led to abuse - device drivers including it; includes being added that create implicit dependencies on OMAP2+ builds; etc. In response, move the SCM headers into mach-omap2/. As part of this, remove the direct SCM access from the OMAP UDC driver. It was clearly broken. The UDC code needs an indepth review for use on OMAP2+ chips. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Cory Maccarrone <darkstar6262@gmail.com> Cc: Kyungmin Park <kyungmin.park@samsung.com>
* | arm: remove machine_desc.io_pg_offst and .phys_ioNicolas Pitre2010-10-201-2/+0
|/ | | | | | | | | | | | | | | Since we're now using addruart to establish the debug mapping, we can remove the io_pg_offst and phys_io members of struct machine_desc. The various declarations were removed using the following script: grep -rl MACHINE_START arch/arm | xargs \ sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }' [ Initial patch was from Jeremy Kerr, example script from Russell King ] Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Eric Miao <eric.miao at canonical.com>
* Merge branch 'devel-map-io' into omap-for-linusTony Lindgren2010-08-041-0/+1
|\
| * ARM: OMAP: Convert to use ->reserve method to reserve boot time memoryRussell King2010-07-161-0/+1
| | | | | | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Removing dead MACH_OMAP2_H4_USB1Christoph Egger2010-07-051-5/+0
| | | | | | | | | | | | | | | | MACH_OMAP2_H4_USB1 doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | Removing dead MACH_OMAP_H4_OTGChristoph Egger2010-07-051-17/+0
| | | | | | | | | | | | | | | | MACH_OMAP_H4_OTG doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | Removing dead OMAP_IRChristoph Egger2010-07-051-4/+0
| | | | | | | | | | | | | | | | | | OMAP_IR doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> [tony@atomide.com: updated for new mux code] Signed-off-by: Tony Lindgren <tony@atomide.com>
* | omap: mux: Convert 2420 platform init code to use new mux codeTony Lindgren2010-07-051-4/+3
| | | | | | | | | | | | Convert 2420 platform init code to use new mux code Signed-off-by: Tony Lindgren <tony@atomide.com>
* | omap: mux: Do keypad muxing in board-*.c filesTony Lindgren2010-07-051-0/+17
| | | | | | | | | | | | | | | | | | | | This way we get pin muxing out of plat-omap and can convert H4 to use the new mux functions. Note that it should be safe to assume we can mux all the keypad pins except on H4 which may have Menelaus connected. Signed-off-by: Tony Lindgren <tony@atomide.com>
* | omap: mux: Select SIP package for H4Tony Lindgren2010-07-051-0/+12
| | | | | | | | | | | | Select SIP package for H4 Signed-off-by: Tony Lindgren <tony@atomide.com>
* | omap: Move omap2 FS USB platform init code into mach-omap2/usb-fs.cTony Lindgren2010-07-051-1/+1
|/ | | | | | | | | Move omap2 FS USB platform init code into mach-omap2/usb-fs.c. This will allow further work later on to use omap hwmod for initializing the device. Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: convert boards to use physmap-flashLadislav Michl2010-02-151-4/+3
| | | | | | | | | Convert OMAP based boards to use physmap-flash. Refreshed against today's Linux omap kernel tree Cc: linux-mtd@lists.infradead.org Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap2/3/4: Fix omap2_map_common_io for multi-omapTony Lindgren2010-02-151-1/+1
| | | | | | Fix omap2_map_common_io for multi-omap Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: headers: Move remaining headers from include/mach to include/platTony Lindgren2009-10-201-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the remaining headers under plat-omap/include/mach to plat-omap/include/plat. Also search and replace the files using these headers to include using the right path. This was done with: #!/bin/bash mach_dir_old="arch/arm/plat-omap/include/mach" plat_dir_new="arch/arm/plat-omap/include/plat" headers=$(cd $mach_dir_old && ls *.h) omap_dirs="arch/arm/*omap*/ \ drivers/video/omap \ sound/soc/omap" other_files="drivers/leds/leds-ams-delta.c \ drivers/mfd/menelaus.c \ drivers/mfd/twl4030-core.c \ drivers/mtd/nand/ams-delta.c" for header in $headers; do old="#include <mach\/$header" new="#include <plat\/$header" for dir in $omap_dirs; do find $dir -type f -name \*.[chS] | \ xargs sed -i "s/$old/$new/" done find drivers/ -type f -name \*omap*.[chS] | \ xargs sed -i "s/$old/$new/" for file in $other_files; do sed -i "s/$old/$new/" $file done done for header in $(ls $mach_dir_old/*.h); do git mv $header $plat_dir_new/ done Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: Fix DEBUG_LL UART io addressSantosh Shilimkar2009-10-191-1/+1
| | | | | | | | This patch fixes the low level debug UART io address as per this series. The change is essential to have CONFIG_DEBUG_LL working. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP2/3 board-*.c files: read bootloader configuration earlierPaul Walmsley2009-09-031-10/+10
| | | | | | | | | | | | | Most board-*.c files read configuration data from the bootloader in their .init_machine() function. This needs to happen earlier, at some point before omap2_init_common_hw() is called. This is because a future patch will use the bootloader serial console port information to enable the UART clocks earlier, immediately after omap2_clk_init(). This is in turn necessary since otherwise clock tree usecounts on clocks like dpll4_m2x2_ck will be bogus, which can cause the currently-active console UART clock to be disabled during boot. Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP: UART: drop OMAP_TAG_UART, enable all UARTs, auto-disabled on idleKalle Valo2009-08-281-5/+0
| | | | | | | | | | | | | | | | OMAP tags are deprecrated so drop them. Drop UART config data which decides which UARTs to enable during boot. This is no longer necessary since serial core code disables clocks after inactivity. Background: with new UART idle code, all on-chip UARTs are idled using a configurable inactivity timer (default 5 seconds.) After the inactivity timer, UART clocks are disabled automatically. Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
OpenPOWER on IntegriCloud