summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-davinci/board-dm644x-evm.c
Commit message (Collapse)AuthorAgeFilesLines
* ARM: davinci: update mdio bus nameSekhar Nori2012-01-271-1/+1
| | | | | | | | | | | | | | | | | | | Commit 5a05a8200a4359ef2bfe9094c137dee35cfdd516 ("davinci_emac: use an unique MDIO bus name") introduced during the v3.3 merge window updated the davinci mdio bus name to make it unique. Update the bus name in board files which use DaVinci MDIO bus to match the new name. Without this PHY is not detected with error like: PHY 0:01 not found net eth0: could not connect to phy 0:01 Tested on DM365 and DA850 EVMs. Cc: Florian Fainelli <florian@openwrt.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
* ARM: 7190/1: restart: davinci: use new restart hookSekhar Nori2012-01-051-0/+1
| | | | | | | | | | | | | | | Rather than using DaVinci specific davinci_soc_info based restart hook, use the restart hook available in the machine descriptor instead. Tested on DM365 and AM18x EVMs. v2: Changed to use restart hook in machine descriptor per Russell's comment. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge git://git.infradead.org/mtd-2.6Linus Torvalds2011-11-071-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/mtd-2.6: (226 commits) mtd: tests: annotate as DANGEROUS in Kconfig mtd: tests: don't use mtd0 as a default mtd: clean up usage of MTD_DOCPROBE_ADDRESS jffs2: add compr=lzo and compr=zlib options jffs2: implement mount option parsing and compression overriding mtd: nand: initialize ops.mode mtd: provide an alias for the redboot module name mtd: m25p80: don't probe device which has status of 'disabled' mtd: nand_h1900 never worked mtd: Add DiskOnChip G3 support mtd: m25p80: add EON flash EN25Q32B into spi flash id table mtd: mark block device queue as non-rotational mtd: r852: make r852_pm_ops static mtd: m25p80: add support for at25df321a spi data flash mtd: mxc_nand: preset_v1_v2: unlock all NAND flash blocks mtd: nand: switch `check_pattern()' to standard `memcmp()' mtd: nand: invalidate cache on unaligned reads mtd: nand: do not scan bad blocks with NAND_BBT_NO_OOB set mtd: nand: wait to set BBT version mtd: nand: scrub BBT on ECC errors ... Fix up trivial conflicts: - arch/arm/mach-at91/board-usb-a9260.c Merged into board-usb-a926x.c - drivers/mtd/maps/lantiq-flash.c add_mtd_partitions -> mtd_device_register vs changed to use mtd_device_parse_register.
| * mtd: nand: rename NAND_USE_FLASH_BBTBrian Norris2011-09-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recall the recently added prefix requirements: * "NAND_" for flags in nand.h, used in nand_chip.options * "NAND_BBT_" for flags in bbm.h, used in nand_chip.bbt_options or in nand_bbt_descr.options Thus, I am changing NAND_USE_FLASH_BBT to NAND_BBT_USE_FLASH. Again, this flag is found in bbm.h and so should NOT be used in the "nand_chip.options" field. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
| * mtd: nand: consolidate redundant flash-based BBT flagsBrian Norris2011-09-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch works with the following three flags from two headers (nand.h and bbm.h): (1) NAND_USE_FLASH_BBT (nand.h) (2) NAND_USE_FLASH_BBT_NO_OOB (nand.h) (3) NAND_BBT_NO_OOB (bbm.h) These flags are all related and interdependent, yet they were in different headers. Flag (2) is simply the combination of (1) and (3) and can be eliminated. This patch accomplishes the following: * eliminate NAND_USE_FLASH_BBT_NO_OOB (i.e., flag (2)) * move NAND_USE_FLASH_BBT (i.e., flag (1)) to bbm.h It's important to note that because (1) and (3) are now both found in bbm.h, they should NOT be used in the "nand_chip.options" field. I removed a small section from the mtdnand DocBook because it referes to NAND_USE_FLASH_BBT in nand.h, which has been moved to bbm.h. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* | arm: Add export.h to ARM specific files as required.Paul Gortmaker2011-10-311-0/+1
| | | | | | | | | | | | | | These files all make use of one of the EXPORT_SYMBOL variants or the THIS_MODULE macro. So they will need <linux/export.h> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* | ARM: mach-davinci: convert boot_params to atag_offsetNicolas Pitre2011-08-211-1/+1
|/ | | | | Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
* ARM: mach-davinci: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_sizeNicolas Pitre2011-07-181-0/+1
| | | | Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
* davinci: DM644x EVM: register MUSB device earlierSergei Shtylyov2011-03-151-5/+3
| | | | | | | | | | | | | | | The MUSB driver doesn't see its platform device on DM644x EVM board anymore since commit 73b089b052a69020b953312a624a6e1eb5b81fab (usb: musb: split davinci to its own platform_driver) because the new probe is called as subsys_initcall() now, and the device is registered later than that by the board code. Move the registration to davinci_evm_init() -- it's safe to do so because the MUSB core device still gets initialized as fs_initcall() -- which is late enough for the I2C GPIO expander (which controls VBUS) to be initialized. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Felipe Balbi <balbi@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
* Merge branch 'davinci-next' into davinci-for-linusKevin Hilman2010-10-211-6/+14
|\ | | | | | | | | | | Conflicts: arch/arm/mach-davinci/board-da830-evm.c arch/arm/mach-davinci/board-da850-evm.c
| * davinci: cleanup mdio arch code and switch to phy_idCyril Chemparathy2010-09-241-6/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes davinci architecture code that has now been rendered useless by the previous patches in the MDIO separation series. In addition, the earlier phy_mask definitions have been replaced with corresponding phy_id definitions. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Tested-by: Michael Williamson <michael.williamson@criticallink.com> Tested-by: Caglar Akyuz <caglarakyuz@gmail.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
| * davinci: dm644x evm: setup NAND flash timingSekhar Nori2010-09-241-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DM644x EVM nand flash timing was earlier being done as a special case in the NAND driver itself. With the NAND driver now capable of progamming the AEMIF interface using timing data passed from the platform, the timing values are being moved into their rightful place in the EVM specific board file. The values being programmed match what was being done earlier and thus do not represent any change in performance/functionality. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* | arm: remove machine_desc.io_pg_offst and .phys_ioNicolas Pitre2010-10-201-2/+0
|/ | | | | | | | | | | | | | | Since we're now using addruart to establish the debug mapping, we can remove the io_pg_offst and phys_io members of struct machine_desc. The various declarations were removed using the following script: grep -rl MACHINE_START arch/arm | xargs \ sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }' [ Initial patch was from Jeremy Kerr, example script from Russell King ] Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Eric Miao <eric.miao at canonical.com>
* Davinci: aintc/cpintc - use ioremap()Cyril Chemparathy2010-05-131-6/+1
| | | | | | | | | | | | | | | | | | This patch implements the following: - interrupt initialization uses ioremap() instead of passing a virtual address via davinci_soc_info. - machine definitions directly point to cp_intc_init() or davinci_irq_init() - davinci_intc_type and davinci_intc_base now get initialized in controller specific init functions instead of davinci_common_init() - minor fix in davinci_irq_init() to use intc_irq_num instead of DAVINCI_N_AINTC_IRQ Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* DaVinci: move IDE platform device to its proper placeSergei Shtylyov2010-05-061-32/+1
| | | | | | | | | | | The IDE platform device is registered in three different places (2 board files for DM644x and in dm646x.c for DM646x) while both the IDE base address and the IDE IRQ are the same for both SoCs -- therefore, the proper place for the IDE platform seems to be in devices.c. Merge the IDE platform data and registration code and create davinci_init_ide() in place of dm646x_init_ide()... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* DaVinci: move AEMIF #define's to the proper headersSergei Shtylyov2010-05-061-12/+6
| | | | | | | | | | | | | | Currently each DaVinci board file #define's its own version of the EMIFA base addresses (all named DAVINCI_ASYNC_EMIF_*_BASE), which leads to duplication. Move these #define's to the SoC specific headers, changing their prefixes from 'DAVINCI' to the 'DM355', 'DM644X', and 'DM646X' since all these base addresses are SoC specific... And while at it, rename DM646X_ASYNC_EMIF_DATA_CE0_BASE to DM646X_ASYNC_EMIF_CS2_SPACE_BASE in order to match the DM646x datasheet. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: misc cleanups from sparseKevin Hilman2010-05-061-1/+1
| | | | | | | | - Convert data/functions to static - include headers for missing declarations - pointer cleanups: struct foo *__iomem f --> struct foo __iomem *f; Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* Add SDA and SCL pin numbers to i2c platform dataPhilby John2010-02-041-0/+2
| | | | | | | | | | | Patch adds SDA and SCL pin numbers to the i2c platform data structure for Davinci DM355 and DM6446. This at present is used for i2c bus recovery. TODO: Add SDA and SCL pin number information to include all Davinci platforms such as dm355-leopard, dm365, dm646x, da8xx etc. Signed-off-by: Philby John <pjohn@in.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* Davinci VPFE Capture: Take i2c adapter id through platform dataVaibhav Hiremath2010-01-061-0/+1
| | | | | | | | | | The I2C adapter ID is actually depends on Board and may vary, Davinci uses id=1, but in case of AM3517 id=3. So modified respective davinci board files. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* DaVinci: rename setup_usb() to davinci_setup_usb()Sergei Shtylyov2009-11-251-1/+2
| | | | | | | | | | | | Rename setup_usb() into davinci_setup_usb(). While at it: - move its declaration from <mach/common.h> to more fitting <mach/usb.h>; - teach it to handle values of the 'mA' parameter greater than 510 and thus pass 1000 instead of 500 for the power switches capable of sourcing over 1 A; - teach it to handle odd values of the 'potpgt_ms' parameter... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* DaVinci: remove unneeded #include'sSergei Shtylyov2009-11-251-12/+0
| | | | | | | | | | There have accumulated quite a lot of them after the code reorganizations... In several cases I had to replace #include <linux/dma-mapping.h> which wasn't needed directly but happened to #include <linux/err.h> which was needed. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: DM644x platform changes for vpfe captureMuralidharan Karicheri2009-09-161-3/+71
| | | | | | | | | | | | | | | | DM644x platform and board setup This adds platform and board setup changes required to support vpfe capture driver on DM644x Tested video capture on DM6446 with tvp514x driver Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@skynet.be> Reviewed-by: David Brownell <david-b@pacbell.net> Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com> Signed-off-by: Denys Dmytriyenko <denis@denix.org> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: audio: move tlv320aic33 i2c setup into board filesChaithrika U S2009-08-261-1/+3
| | | | | | | Tested on DM6446, DM355, DM6447, DA850 EVMs. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: audio clocks: use struct device instead of clock namesKevin Hilman2009-08-261-3/+1
| | | | | | | There is no need to pass clock name strings in platform_data. Instead, setup clkdev nodes to have correct ASoC device names. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: ASoC: Add the platform devices for ASPChaithrika U S2009-08-261-0/+5
| | | | | | | | | | | | | 1) Registers the platform devices for ASP on dm355, dm644x and dm646x so that the machine driver can probe to get ASP related platform data. 2) Move towards definition of the asp clocks using physical name(for dm355 and dm644x) 3) Add platform data to board specific files. Signed-off-by: Naresh Medisetty <naresh@ti.com> Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* ARM: includecheck fix: board-dm644x-evm.cJaswinder Singh Rajput2009-07-251-1/+0
| | | | | | | | | | fix the following 'make includecheck' warning: arch/arm/mach-davinci/board-dm644x-evm.c: mach/common.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* davinci: Factor out emac mac address handlingMark A. Greer2009-05-281-18/+3
| | | | | | | | Factor out the code to extract that mac address from i2c eeprom. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Move emac platform_data to SoC-specific filesMark A. Greer2009-05-281-8/+6
| | | | | | | | | | | Since most of the emac platform_data is really SoC specific and not board specific, move it to the SoC-specific files. Put a pointer to the platform_data in the soc_info structure so the board-specific code can set some of the platform_data if it needs to. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Encapsulate SoC-specific data in a structureMark A. Greer2009-05-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Create a structure to encapsulate SoC-specific information. This will assist in generalizing code so it can be used by different SoCs that have similar hardware but with minor differences such as having a different base address. The idea is that the code for each SoC fills out a structure with the correct information. The board-specific code then calls the SoC init routine which in turn will call a common init routine that makes a copy of the structure, maps in I/O regions, etc. After initialization, code can get a pointer to the structure by calling davinci_get_soc_info(). Eventually, the common init routine will make a copy of all of the data pointed to by the structure so the original data can be made __init_data. That way the data for SoC's that aren't being used won't consume memory for the entire life of the kernel. The structure will be extended in subsequent patches but initially, it holds the map_desc structure for any I/O regions the SoC/board wants statically mapped. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: EMAC platform supportKevin Hilman2009-05-261-23/+14
| | | | | | | Add SoC and platform-specific data and init for DaVinci EMAC network driver. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: MMC platform supportKevin Hilman2009-05-261-0/+24
| | | | | | Add SoC and platform-specific data and init for MMC driver. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* [ARM] 5506/1: davinci: DMA_32BIT_MASK --> DMA_BIT_MASK(32)Kevin Hilman2009-05-071-2/+2
| | | | | | | | As per commit 284901a90a9e0b812ca3f5f852cbbfb60d10249d, use DMA_BIT_MASK(n) Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* davinci: DM644x: NAND: update partitioningDavid Brownell2009-04-271-6/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update NAND partitioning for the dm6446 evm, unmasking the hidden data at the beginning and letting the kernel be updated from Linux. - This is boot-compatible with TI's software (U-Boot 1.20 and both the 2.6.10 and 2.6.18 kernels), in terms of startup and loading kernels from flash. - In the same way, it's also boot-compatible with mainline U-Boot, which stores U-Boot params in block 0 not block 16. - It's not quite compatible with systems that previously used NAND partitions to hold (filesystem) data. The compatibilities are a bit different based on which kernel was used previously + Users of TI/MV kernels no longer see mtd2 "params" (mainline u-boot env is in a different place) * Filesystem is now mtd2 ... vs mtd3 + Users of GIT kernels now see mtd0 and mtd1 partitions * Filesystem partition starts 640 KBytes earlier * Filesystem is now mtd2 ... vs mtd0 * Linux now *uses* the flash-resident BBT * Removes annoying slowdown/hiccup during boot * Potentially ~64KB less space available with TI/MV kernels If you *used* NAND partitions from Linux, there is no solution that's fully compatible with all previous kernels in those respects ... ergo this "best compromise". It'd be good to back back up the filesystem data; or, carry your own backwards-compatibility patch for awhile. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: update DM644x support in preparation for more SoCsKevin Hilman2009-04-271-33/+259
| | | | | | | | Rework DM644x code into SoC specific and board specific parts. This is also to generalize the structure a bit so it's easier to add support for new SoCs in the DaVinci family. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: DM644x: rename board fileKevin Hilman2009-04-271-0/+440
Rename DM6446 EVM board file, no functional changes. Code is updated and reworked in following patch. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
OpenPOWER on IntegriCloud