summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-davinci/board-da850-evm.c
Commit message (Collapse)AuthorAgeFilesLines
* Merge tag 'for-linus-3.3' of git://git.infradead.org/mtd-2.6Linus Torvalds2012-01-101-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MTD pull for 3.3 * tag 'for-linus-3.3' of git://git.infradead.org/mtd-2.6: (113 commits) mtd: Fix dependency for MTD_DOC200x mtd: do not use mtd->block_markbad directly logfs: do not use 'mtd->block_isbad' directly mtd: introduce mtd_can_have_bb helper mtd: do not use mtd->suspend and mtd->resume directly mtd: do not use mtd->lock, unlock and is_locked directly mtd: do not use mtd->sync directly mtd: harmonize mtd_writev usage mtd: do not use mtd->lock_user_prot_reg directly mtd: mtd->write_user_prot_reg directly mtd: do not use mtd->read_*_prot_reg directly mtd: do not use mtd->get_*_prot_info directly mtd: do not use mtd->read_oob directly mtd: mtdoops: do not use mtd->panic_write directly romfs: do not use mtd->get_unmapped_area directly mtd: do not use mtd->get_unmapped_area directly mtd: do use mtd->point directly mtd: introduce mtd_has_oob helper mtd: mtdcore: export symbols cleanup mtd: clean-up the default_mtd_writev function ... Fix up trivial edit/remove conflict in drivers/staging/spectra/lld_mtd.c
| * mtd: introduce mtd_read interfaceArtem Bityutskiy2012-01-091-1/+1
| | | | | | | | | | Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | ARM: 7190/1: restart: davinci: use new restart hookSekhar Nori2012-01-051-0/+1
|/ | | | | | | | | | | | | | | Rather than using DaVinci specific davinci_soc_info based restart hook, use the restart hook available in the machine descriptor instead. Tested on DM365 and AM18x EVMs. v2: Changed to use restart hook in machine descriptor per Russell's comment. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: davinci: da850 evm: change audio edma event queue to EVENTQ_0Manjunathappa, Prakash2011-12-051-1/+1
| | | | | | | | | | | | | | | | On OMAP-L138 platform, EDMA event queue 0 should be used for audio transfers so that they are not starved by video data moving on event queue 1. Commit 48519f0ae03bc7e86b3dc93e56f1334d53803770 (ASoC: davinci: let platform data define edma queue numbers) had a side-effect of changing this behavior by making the driver actually honor the platform data passed. Fix this now by passing event queue 0 as the queue to be used for audio transfers. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Cc: <stable@vger.kernel.org> # v2.6.36.x and above
* Merge git://git.infradead.org/mtd-2.6Linus Torvalds2011-11-071-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/mtd-2.6: (226 commits) mtd: tests: annotate as DANGEROUS in Kconfig mtd: tests: don't use mtd0 as a default mtd: clean up usage of MTD_DOCPROBE_ADDRESS jffs2: add compr=lzo and compr=zlib options jffs2: implement mount option parsing and compression overriding mtd: nand: initialize ops.mode mtd: provide an alias for the redboot module name mtd: m25p80: don't probe device which has status of 'disabled' mtd: nand_h1900 never worked mtd: Add DiskOnChip G3 support mtd: m25p80: add EON flash EN25Q32B into spi flash id table mtd: mark block device queue as non-rotational mtd: r852: make r852_pm_ops static mtd: m25p80: add support for at25df321a spi data flash mtd: mxc_nand: preset_v1_v2: unlock all NAND flash blocks mtd: nand: switch `check_pattern()' to standard `memcmp()' mtd: nand: invalidate cache on unaligned reads mtd: nand: do not scan bad blocks with NAND_BBT_NO_OOB set mtd: nand: wait to set BBT version mtd: nand: scrub BBT on ECC errors ... Fix up trivial conflicts: - arch/arm/mach-at91/board-usb-a9260.c Merged into board-usb-a926x.c - drivers/mtd/maps/lantiq-flash.c add_mtd_partitions -> mtd_device_register vs changed to use mtd_device_parse_register.
| * mtd: nand: rename NAND_USE_FLASH_BBTBrian Norris2011-09-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recall the recently added prefix requirements: * "NAND_" for flags in nand.h, used in nand_chip.options * "NAND_BBT_" for flags in bbm.h, used in nand_chip.bbt_options or in nand_bbt_descr.options Thus, I am changing NAND_USE_FLASH_BBT to NAND_BBT_USE_FLASH. Again, this flag is found in bbm.h and so should NOT be used in the "nand_chip.options" field. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
| * mtd: nand: consolidate redundant flash-based BBT flagsBrian Norris2011-09-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch works with the following three flags from two headers (nand.h and bbm.h): (1) NAND_USE_FLASH_BBT (nand.h) (2) NAND_USE_FLASH_BBT_NO_OOB (nand.h) (3) NAND_BBT_NO_OOB (bbm.h) These flags are all related and interdependent, yet they were in different headers. Flag (2) is simply the combination of (1) and (3) and can be eliminated. This patch accomplishes the following: * eliminate NAND_USE_FLASH_BBT_NO_OOB (i.e., flag (2)) * move NAND_USE_FLASH_BBT (i.e., flag (1)) to bbm.h It's important to note that because (1) and (3) are now both found in bbm.h, they should NOT be used in the "nand_chip.options" field. I removed a small section from the mtdnand DocBook because it referes to NAND_USE_FLASH_BBT in nand.h, which has been moved to bbm.h. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* | Merge branch 'next/devel' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds2011-11-011-0/+114
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'next/devel' of git://git.linaro.org/people/arnd/arm-soc: (50 commits) ARM: tegra: update defconfig arm/tegra: Harmony: Configure PMC for low-level interrupts arm/tegra: device tree support for ventana board arm/tegra: add support for ventana pinmuxing arm/tegra: prepare Seaboard pinmux code for derived boards arm/tegra: pinmux: ioremap registers gpio/tegra: Convert to a platform device arm/tegra: Convert pinmux driver to a platform device arm/dt: Tegra: Add pinmux node to tegra20.dtsi arm/tegra: Prep boards for gpio/pinmux conversion to pdevs ARM: mx5: fix clock usage for suspend ARM i.MX entry-macro.S: remove now unused code ARM i.MX boards: use CONFIG_MULTI_IRQ_HANDLER ARM i.MX tzic: add handle_irq function ARM i.MX avic: add handle_irq function ARM: mx25: Add the missing IIM base definition ARM i.MX avic: convert to use generic irq chip mx31moboard: Add poweroff support ARM: mach-qong: Add watchdog support ARM: davinci: AM18x: Add wl1271/wlan support ... Fix up conflicts in: arch/arm/mach-at91/at91sam9g45.c arch/arm/mach-mx5/devices-imx53.h arch/arm/plat-mxc/include/mach/memory.h
| * | ARM: davinci: AM18x: Add wl1271/wlan supportIdo Yariv2011-09-171-0/+114
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The wl1271 daughter card for AM18x EVMs is a combo wireless connectivity add-on card, based on the LS Research TiWi module with Texas Instruments' wl1271 solution. It is a 4-wire, 1.8V, embedded SDIO WLAN device with an external IRQ line and is power-controlled by a GPIO-based fixed regulator. Add support for the WLAN capabilities of this expansion board. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
* | | Merge branch 'kprobes-test' of git://git.yxit.co.uk/linux into devel-stableRussell King2011-09-211-0/+28
|\ \ \ | |/ /
| * | ARM: davinci: da850 EVM: read mac address from SPI flashRajashekhara, Sudhakar2011-09-071-0/+28
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DA850/OMAP-L138 EMAC driver uses random mac address instead of a fixed one because the mac address is not stuffed into EMAC platform data. This patch provides a function which reads the mac address stored in SPI flash (registered as MTD device) and populates the EMAC platform data. The function which reads the mac address is registered as a callback which gets called upon addition of MTD device. NOTE: In case the MAC address stored in SPI flash is erased, follow the instructions at [1] to restore it. [1] http://processors.wiki.ti.com/index.php/GSG:_OMAP-L138_DVEVM_Additional_Procedures#Restoring_MAC_address_on_SPI_Flash Modifications in v2: Guarded registering the mtd_notifier only when MTD is enabled. Earlier this was handled using mtd_has_partitions() call, but this has been removed in Linux v3.0. Modifications in v3: a. Guarded da850_evm_m25p80_notify_add() function and da850evm_spi_notifier structure with CONFIG_MTD macros. b. Renamed da850_evm_register_mtd_user() function to da850_evm_setup_mac_addr() and removed the struct mtd_notifier argument to this function. c. Passed the da850evm_spi_notifier structure to register_mtd_user() function. Modifications in v4: Moved the da850_evm_setup_mac_addr() function within the first CONFIG_MTD ifdef construct. Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Cc: stable@kernel.org
* | ARM: mach-davinci: convert boot_params to atag_offsetNicolas Pitre2011-08-211-1/+1
|/ | | | | Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
* Merge branch 'next/devel' of ↵Linus Torvalds2011-07-261-0/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/devel' of ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (128 commits) ARM: S5P64X0: External Interrupt Support ARM: EXYNOS4: Enable MFC on Samsung NURI ARM: EXYNOS4: Enable MFC on universal_c210 ARM: S5PV210: Enable MFC on Goni ARM: S5P: Add support for MFC device ARM: EXYNOS4: Add support FIMD on SMDKC210 ARM: EXYNOS4: Add platform device and helper functions for FIMD ARM: EXYNOS4: Add resource definition for FIMD ARM: EXYNOS4: Change devname for FIMD clkdev ARM: SAMSUNG: Add IRQ_I2S0 definition ARM: SAMSUNG: Add platform device for idma ARM: EXYNOS4: Add more registers to be saved and restored for PM ARM: EXYNOS4: Add more register addresses of CMU ARM: EXYNOS4: Add platform device for dwmci driver ARM: EXYNOS4: configure rtc-s3c on NURI ARM: EXYNOS4: configure MAX8903 secondary charger on NURI ARM: EXYNOS4: configure ADC on NURI ARM: EXYNOS4: configure MAX17042 fuel gauge on NURI ARM: EXYNOS4: configure regulators and PMIC(MAX8997) on NURI ARM: EXYNOS4: Increase NR_IRQS for devices with more IRQs ... Fix up tons of silly conflicts: - arch/arm/mach-davinci/include/mach/psc.h - arch/arm/mach-exynos4/Kconfig - arch/arm/mach-exynos4/mach-smdkc210.c - arch/arm/mach-exynos4/pm.c - arch/arm/mach-imx/mm-imx1.c - arch/arm/mach-imx/mm-imx21.c - arch/arm/mach-imx/mm-imx25.c - arch/arm/mach-imx/mm-imx27.c - arch/arm/mach-imx/mm-imx31.c - arch/arm/mach-imx/mm-imx35.c - arch/arm/mach-mx5/mm.c - arch/arm/mach-s5pv210/mach-goni.c - arch/arm/mm/Kconfig
| * davinci: da850 evm: register SATA deviceSekhar Nori2011-07-081-0/+7
| | | | | | | | | | | | | | Register the platform device for SATA interface present on the DA850/OMAP-L138/AM18x EVM. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
* | ARM: mach-davinci: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_sizeNicolas Pitre2011-07-181-0/+1
|/ | | | Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
* davinci: DA850 EVM: kill useless variableSergei Shtylyov2011-03-111-4/+1
| | | | | | | | | | Commit 75e2ea643fe43d5aa836475acee5bd97cd9ea4bf (davinci: DA850/OMAP-L138 EVM expander setup and UI card detection) introduced a useless variable: it's always set to 1 before it's checked in da850_evm_setup_nor_nand()... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
* davinci: add spi devices support for da850/omap-l138/am18x evmSekhar Nori2011-03-111-0/+73
| | | | | | | | | | | | | | This patch adds the on-board SPI flash device to the DA850/OMAP-L138/AM18x EVM. It also registers the SPI flash device to the MTD subsystem. Based on SPI flash device support for MityDSP-L138F platform. Signed-off-by: Sekhar Nori <nsekhar@ti.com> [michael.williamson@criticallink.com: moved da850_evm_spi1_pdata to devices-da8xx.c] [michael.williamson@criticallink.com: moved da850evm_init_spi1 to devices-da8xx.c] Signed-off-by: Michael Williamson <michael.williamson@criticallink.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
* davinci: da850: move da850_evm specific mmcsd pinmux array to board file.Michael Williamson2011-02-281-1/+8
| | | | | | | | | | The da850_mmcsd0_pins pinmux array contains pins that are specific to the da850 evm board (the write protect and card detect GPIO pins). Move the array to the board file. Signed-off-by: Michael Williamson <michael.williamson@criticallink.com> Tested-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
* davinci: da850: move da850_evm specific mcasp pins to board file.Michael Williamson2011-02-281-1/+8
| | | | | | | | | | The da850_mcasp_pins pinmux array is specific to the da850_evm, and is not generic. Move the array to the board file, make it static initdata, and rename it accordingly. Signed-off-by: Michael Williamson <michael.williamson@criticallink.com> Tested-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
* davinci: am18x/da850/omap-l138 evm: add support for higher speed gradesSekhar Nori2010-12-221-2/+23
| | | | | | | | | | | | | | | | | | | | | | | Apart from the regular AM18x/DA850/OMAP-L138 SoC operating at 300MHz, these SoCs have variants that can operate at a maximum of 456MHz. Variants at 408Mhz and 375 Mhz are available as well. Not all silicon is qualified to run at higher speeds and unfortunately the maximum speed the chip can support can only be determined from the label on the package (not software readable). The EVM hardware for all these variants is the same (except for the actual SoC populated). U-Boot on the EVM sets up ATAG_REVISION to inform the OS regarding the speed grade supported by the silicon. We use this information to pass on the speed grade information to the SoC code. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* da850-evm: add baseboard GPIO expander buttons, switches and LEDsBen Gardiner2010-12-221-0/+187
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds a pca953x platform device for the tca6416 found on the evm baseboard. The tca6416 is a GPIO expander, also found on the UI board at a separate I2C address. The pins of the baseboard IO expander are connected to software reset, deep sleep enable, test points, a push button, DIP switches and LEDs. Add support for the push button, DIP switches and LEDs and test points (as free GPIOs). The reset and deep sleep enable connections are reserved by the setup routine so that userspace can't toggle those lines. The existing tca6416-keypad driver was not employed because there was no apararent way to register the LEDs connected to gpio's on the tca6416 while simultaneously registering the tca6416-keypad instance. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Reviewed-by: Chris Cordahi <christophercordahi@nanometrics.ca> CC: Govindarajan, Sriramakrishnan <srk@ti.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* da850-evm: extract defines for SEL{A,B,C} pins in UI expanderBen Gardiner2010-12-221-12/+12
| | | | | | | | | | | | | The setup and teardown methods of the UI expander reference the SEL_{A,B,C} pins by 'magic number' in each function. This uses the common enum for their offsets in the expander setup and teardown functions. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Reviewed-by: Chris Cordahi <christophercordahi@nanometrics.ca> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> CC: Victor Rodriguez <vm.rod25@gmail.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* da850-evm: add UI Expander pushbuttonsBen Gardiner2010-12-221-0/+95
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds EV_KEYs for each of the 8 pushbuttons on the UI board via a gpio-key device. The expander is a tca6416; it controls the SEL_{A,B,C} lines which enable and disable the peripherals found on the UI board in addition to the 8 pushbuttons mentioned above. The reason the existing tca6416-keypad driver is not employed is because there was no aparent way to keep the gpio lines used as SEL_{A,B,C} registered while simultaneously registering the pushbuttons as a tca6416-keypad instance. Some experimentation with the polling interval was performed; we were searching for the largest polling interval that did not affect the feel of the responsiveness of the buttons. It is very subjective but 200ms seems to be a good value that accepts firm pushes but rejects very light ones. The key values assigned to the buttons were arbitrarily chosen to be F1-F8. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Reviewed-by: Chris Cordahi <christophercordahi@nanometrics.ca> CC: Govindarajan, Sriramakrishnan <srk@ti.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* da850-evm, trivial: use da850_evm prefix for consistencyBen Gardiner2010-12-101-3/+3
| | | | | | | | | | There was a single case of 'da850evm' prefix in the board-da850-evm.c file where the reset of the prefixes were 'da850_evm'; change it to 'da850_evm' for consistency. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: da850-evm: UI expander gpio_set_value can sleep, use _cansleepBen Gardiner2010-12-101-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | When the RMII PHY on the UI board is enabled with CONFIG_DA850_UI_RMII then then following will be printed to the console when warnings are also enabled: WARNING: at drivers/gpio/gpiolib.c:1567 __gpio_set_value+0x4c/0x5c() Modules linked in: [<c002c6ac>] (unwind_backtrace+0x0/0xf8) from [<c003b48c>] (warn_slowpath_common+0x4c/0x64) [<c003b48c>] (warn_slowpath_common+0x4c/0x64) from [<c003b4c0>] (warn_slowpath_null+0x1c/0x24) [<c003b4c0>] (warn_slowpath_null+0x1c/0x24) from [<c01aed60>] (__gpio_set_value+0x4c/0x5c) [<c01aed60>] (__gpio_set_value+0x4c/0x5c) from [<c0033bd4>] (da850_evm_ui_expander_setup+0x1e4/0x2 44) [<c0033bd4>] (da850_evm_ui_expander_setup+0x1e4/0x244) from [<c02e2e1c>] (pca953x_probe+0x1f8/0x29 0) <snip> Traced the WARN_ON to the gpio_set_value(rmii_sel,0) call in da850_evm_setup_emac_rmii. Replacing the call with the _cansleep variant results in no more warning. Also replacing the gpio_set_value calls in the teardown function. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Reviewed-by: Chris Cordahi <christophercordahi@nanometrics.ca> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* Merge branch 'davinci-next' into davinci-for-linusKevin Hilman2010-10-211-20/+72
|\ | | | | | | | | | | Conflicts: arch/arm/mach-davinci/board-da830-evm.c arch/arm/mach-davinci/board-da850-evm.c
| * arm/davinci: remove duplicated includeNicolas Kaiser2010-10-041-1/+0
| | | | | | | | | | | | | | Remove duplicated include. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
| * davinci: cleanup mdio arch code and switch to phy_idCyril Chemparathy2010-09-241-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes davinci architecture code that has now been rendered useless by the previous patches in the MDIO separation series. In addition, the earlier phy_mask definitions have been replaced with corresponding phy_id definitions. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Tested-by: Michael Williamson <michael.williamson@criticallink.com> Tested-by: Caglar Akyuz <caglarakyuz@gmail.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
| * davinci: Add machine checks to DA8XX serial console init routinesMichael Williamson2010-09-241-0/+3
| | | | | | | | | | | | | | | | | | | | This patch adds machine checks in the serial console init routines for the DA8XX EVM boards. This is needed because there are other DA8XX based machines that use a different UART/tty as the console and may be included in a common kernel build. Signed-off-by: Michael Williamson <michael.williamson@criticallink.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
| * davinci: am18x/da850/omap-l138 evm: setup NAND flash timingSekhar Nori2010-09-241-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Setup the NAND flash timings for DA850 EVM Before configuring the timing values, throughput calculation using dd command yielded 469 kB/s write and 966 kB/s read speed. After the timing configuration, the throughput was measured to be 2.4 MB/s write and 5 MB/s read. [Mukul Bhatnagar: actual calculation of timing values from the NAND datasheet] Signed-off-by: Sekhar Nori <nsekhar@ti.com> Cc: Mukul Bhatnagar <mbhatnagar@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
| * DA850: move MII/RMII pin lists to the board fileSergei Shtylyov2010-09-241-2/+19
| | | | | | | | | | | | | | | | | | | | | | | | The CPGMAC pin list in da850.c was incorrectly split into two MII/RMII mode specific pin lists, while what pin group is used is a function of how the board is wired. Copy the pin lists to board-da850-evm.c, renaming them accordingly, and merge the two lists in da850.c into one, da850_cpgmac_pins[], representing the CPGMAC module as a whole... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Tested-by: Ben Gardiner <bengardiner@nanometrics.ca> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
| * DA850: move NAND/NOR pin lists to the board fileSergei Shtylyov2010-09-241-3/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The NAND/NOR flash pin lists (da850_nand_pins/da850_nor_pins) are purely board specific and as such shouldn't be in da850.c -- copy them to board-da850-evm.c, renaming to da850_evm_nand_pins/da850_evm_nor_pins respectively, and merge the two lists in da850.c into one, representing the EMIF 2.5 module as a whole, just like we have it in da830.c... While at it, remove the '__init' modifier from da850_evm_setup_nor_nand() as this function is called from non '__init' code... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Tested-by: Ben Gardiner <bengardiner@nanometrics.ca> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
| * davinci: am18x/da850/omap-l138: keep async clock constant with cpufreqSekhar Nori2010-09-241-1/+1
| | | | | | | | | | | | | | | | | | Keep PLL0 SYSCLK3 at a constant rate of 100MHz. This enables the AEMIF timing to remain valid even as the PLL0 output is changed by cpufreq driver to save power. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
| * davinci: introduce support for AM1x ARM9 microprocessorsSekhar Nori2010-09-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Sitara AM17x SoCs from TI are an OMAP-L137 pin-to-pin compatible ARM9 microprocessor offering from TI. The Sitara AM18x SoCs from TI are an OMAP-L138 pin-to-pin compatible ARM9 microprocessor offering from TI. More information about these processors available at: www.ti.com/am1x Because of their compatibiliy with OMAP-L1x, the kernel support for OMAP-L1x is fully relevant to AM1x processors. This patch updates the Kconfig prompt and help text to include the AM1x part names to help users select configurations required for these parts easily. Also, the hardware information that shows up in /proc/cpuinfo is updated to show applicability of the respective OMAP-L1x EVMs for AM1x parts. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
| * davinci: da850 evm: sparse cleanup: make file local variables staticSekhar Nori2010-09-241-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without this cleanup, sparse checker reports warnings of the type: CHECK arch/arm/mach-davinci/board-da850-evm.c arch/arm/mach-davinci/board-da850-evm.c:112:22: warning: symbol 'da850_evm_nandflash_partition' was not declared. Should it be static? The nand flash partitions and regulator supplies are used within the EVM file and so should have been static This patch has been boot tested on DA830 and DA850 EVMs. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* | arm: remove machine_desc.io_pg_offst and .phys_ioNicolas Pitre2010-10-201-2/+0
|/ | | | | | | | | | | | | | | Since we're now using addruart to establish the debug mapping, we can remove the io_pg_offst and phys_io members of struct machine_desc. The various declarations were removed using the following script: grep -rl MACHINE_START arch/arm | xargs \ sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }' [ Initial patch was from Jeremy Kerr, example script from Russell King ] Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Eric Miao <eric.miao at canonical.com>
* Merge branch 'davinci-for-linus' of ↵Linus Torvalds2010-08-081-1/+51
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: davinci: dm646x EVM: Specify reserved EDMA channel/slots davinci: da8xx/omapl EVM: Specify reserved channels/slots davinci: support for EDMA resource sharing davinci: edma: provide ability to detect insufficient CC info data davinci: da8xx: sparse cleanup: remove duplicate entries in irq priorities davinci: DM365: fixed second serial port Davinci: tnetv107x evm board initial support Davinci: tnetv107x initial gpio support Davinci: tnetv107x soc support Davinci: tnetv107x decompresser uart definitions Davinci: generalized debug macros
| * davinci: da8xx/omapl EVM: Specify reserved channels/slotsRajashekhara, Sudhakar2010-08-051-1/+51
| | | | | | | | | | | | | | | | | | | | | | | | The drivers on da8xx/omapl EVMs do not utilize all the channels and slots provided by EDMA. Some of these are better utilitzed by the DSP on the SoC for speeding up codec operations. Reserve these channels/slots for the DSP. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* | Merge branch 'topic/asoc' into for-linusTakashi Iwai2010-08-051-1/+1
|\ \
| * | ASoC: davinci: let platform data define edma queue numbersSekhar Nori2010-07-201-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the EDMA queue to be used by for servicing ASP through internal RAM is fixed to EDMAQ_0 and that to service internal RAM from external RAM is fixed to EDMAQ_1. This may not be the desirable configuration on all platforms. For example, on DM365, queue 0 has large fifo size and is more suitable for video transfers. Having audio and video transfers on the same queue may lead to starvation on audio side. platform data as defined currently passes a queue number to the driver but that remains unused inside the driver. Fix this by defining one queue each for ASP and RAM transfers in the platform data and using it inside the driver. Since EDMAQ_0 maps to 0, thats the queue that will be used if the asp queue number is not initialized. None of the platforms currently utilize ping-pong transfers through internal RAM so that functionality remains unchanged too. This patch has been tested on DM644x and OMAP-L138 EVMs. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | davinci: da850/omap-l138 evm: account for DEFDCDC{2,3} being tied highSekhar Nori2010-07-281-0/+8
|/ | | | | | | | | | | | | Per the da850/omap-l138 Beta EVM SOM schematic, the DEFDCDC2 and DEFDCDC3 lines are tied high. This leads to a 3.3V IO and 1.2V CVDD voltage. Pass the right platform data to the TPS6507x driver so it can operate on the DEFDCDC{2,3}_HIGH register to read and change voltage levels. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* davinci: da850 TPS6507x touch screen driver board dataTodd Fischer2010-05-281-0/+12
| | | | | | | | | | | The touch screen controller in the TPS6507x chip needs values that are dependent on the characteristics of the touch screen hardware being used in the board design. In addition, the board provides version information that is exposed via the kernel input sub-system. Signed-off-by: Todd Fischer <todd.fischer@ridgerun.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Add tps6507x board data structureTodd Fischer2010-05-281-1/+6
| | | | | | | | | | | | Add mfd structure which refrences sub-driver initialization data. For example, for a giving hardware implementation, the voltage regulator sub-driver initialization data provides the mapping betten a voltage regulator and what the output voltage is being used for. Signed-off-by: Todd Fischer <todd.fischer@ridgerun.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* Davinci: aintc/cpintc - use ioremap()Cyril Chemparathy2010-05-131-9/+1
| | | | | | | | | | | | | | | | | | This patch implements the following: - interrupt initialization uses ioremap() instead of passing a virtual address via davinci_soc_info. - machine definitions directly point to cp_intc_init() or davinci_irq_init() - davinci_intc_type and davinci_intc_base now get initialized in controller specific init functions instead of davinci_common_init() - minor fix in davinci_irq_init() to use intc_irq_num instead of DAVINCI_N_AINTC_IRQ Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* Davinci: promote da8xx_pinmux_setup()Cyril Chemparathy2010-05-061-9/+9
| | | | | | | | Rename da8xx_pinmux_setup() to davinci_cfg_reg_list() and promote it for use in other SOCs that may need the ability to configure multiple pins in one shot. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* Davinci: cpintc host map configurationCyril Chemparathy2010-05-061-1/+1
| | | | | | | | | | | | | | | Host map configuration instructs the interrupt controller to route interrupt channels to FIQ or IRQ lines. Currently, DA8xx family of devices leave these registers at their reset-default values. TNETV107X however does not have sane reset defaults, and therefore this architecture needs to reconfigure the host-map such that channels 0 and 1 go to FIQ, and the remaining channels raise IRQs. This patch adds an optional host map argument to cp_intc_init() for this. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: da850/omap-l138 EVM: register for suspend supportSekhar Nori2010-02-041-0/+17
| | | | | Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: da850/omap-l138: Enable 4-bit eccSudhakar Rajashekhara2010-02-041-0/+1
| | | | | | | | This patch initializes the platform data to enable 4-bit ecc support on DA850/OMAP-L138. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: da850/omap-l138: Modify NOR partition infoSudhakar Rajashekhara2010-02-041-1/+13
| | | | | | | | | | | | | On DA850/OMAP-L138, NOR flash partition was starting from offset ZERO erasing the UBL and u-boot when the complete NOR is erased. This patch moves the start of the partition to 512K, after the bootloaders and u-boot env variables. This patch also creates a new partition on NOR Flash to store Linux kernel image. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: da8xx/omapl1: add support for the second sysconfig moduleSekhar Nori2010-02-041-1/+1
| | | | | | | | | | | | | OMAP-L138 adds a second SYSCFG region having useful functionality like deep sleep, pull up/down control and SATA clock stop. This patch makes provision for accessing registers from second SYSCFG region in da8xx code. Note that OMAP-L137 has a single SYSCFG region. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
OpenPOWER on IntegriCloud