summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: omap4-panda: Add USB Host supportRoger Quadros2013-06-191-0/+67
| | | | | | | | | | | | | | | | | | Provide the RESET and Power regulators for the USB PHY, the USB Host port mode and the PHY device. Also provide pin multiplexer information for the USB host pins. HACK: The reset control need to be replaced with the proper gpio-controlled reset driver as soon it will be merged [1]. [1] http://thread.gmane.org/gmane.linux.drivers.devicetree/36830 Signed-off-by: Roger Quadros <rogerq@ti.com> [benoit.cousson@linaro.org: Add disclaimer about the reset control inside changelog and code] Cc: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: AM43x EPOS EVM supportAfzal Mohammed2013-06-192-1/+20
| | | | | | | | | Add AM43x ePOS EVM minimal DT source - this is a minimal one to get it booting. Also include it in omap2plus dtbs and document bindings. The hardware is under development. Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: OMAP5: Add bandgap DT entryEduardo Valentin2013-06-191-0/+9
| | | | | | | | | | | | Add bandgap device DT entry for OMAP5 dtsi. Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: J Keerthy <j-keerthy@ti.com> [benoit.cousson@linaro.org: Fix alignement and use the macros for IRQ attributes] Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVMMugunthan V N2013-06-191-0/+64
| | | | | | | | | | | | | | | Add pinmux configurations for RGMII based CPSW ethernet to am335x-evm. Default mode is nothing but the values required for the module during active state. With this configurations module is functional as expected. Sleep mode is nothing but the values required for the module during inactive state. The pins are configured to its reset state to optimize energy usage for the pins for the suspend/resume cycle Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMskMugunthan V N2013-06-191-0/+92
| | | | | | | | | | | | | | | Add pinmux configurations for RGMII based CPSW ethernet to AM335x EVMsk. Default mode is nothing but the values required for the module during active state. With this configurations module is functional as expected. Sleep mode is nothing but the values required for the module during inactive state. The pins are configured to its reset state to optimize energy usage for the pins for the suspend/resume cycle Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: AM33XX: Add pinmux configuration for CPSW to beagleboneMugunthan V N2013-06-191-0/+67
| | | | | | | | | | | | | | | Add pinmux configurations for MII based CPSW ethernet to am335x-bone. Default mode is nothing but the values required for the module during active state. With this configurations module is functional as expected. Sleep mode is nothing but the values required for the module during inactive state. The pins are configured to its reset state to optimize energy usage for the pins for the suspend/resume cycle Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: omap3-overo: Add default trigger for TWL4030 LEDFlorian Vaussard2013-06-191-0/+1
| | | | | | | | | | Commit c971ff1 'leds: leds-pwm: Defer led_pwm_set() if PWM can sleep' fixed a crash when using a trigger with a pwm-led provided by an external chip. Now it is safe to add the default trigger according to board-overo.c. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: omap3-tobi: Correct polarity for GPIO LEDFlorian Vaussard2013-06-191-1/+1
| | | | | | | The LED is active low, not active high. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: omap3-tobi: Add SMSC911X nodeFlorian Vaussard2013-06-191-0/+48
| | | | | | | | | The Tobi expansion boards embeds a SMSC LAN8700 PHY. Add the corresponding node into the DT. The regulators are not designed to be turned off. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: OMAP3: Include IRQ headerFlorian Vaussard2013-06-191-0/+1
| | | | | | | Some nodes in OMAP3 DTS now use edge or level sensitive interrupts. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: OMAP5: Add Palmas MFD node and regulator nodesJ Keerthy2013-06-181-0/+167
| | | | | | | | | | | | | Add Palmas MFD node and the regulator nodes for OMAP5. The node definitions are based on: https://lkml.org/lkml/2013/6/6/25 Boot tested on omap5-uevm board. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: J Keerthy <j-keerthy@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evmskPhilip Avinash2013-06-181-0/+23
| | | | | | | | | | | PWM output from ecap2 uses as backlight source. Also adds low threshold value to have a uniform divisions in brightness-levels scales with inverse polarity. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evmPhilip Avinash2013-06-181-0/+23
| | | | | | | | | | PWM output from ecap0 uses as backlight source. Also adds low threshold value to have a uniform divisions in brightness-levels scales. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: AM33XX: Add PWMSS device tree nodesPhilip Avinash2013-06-181-0/+84
| | | | | | | | | | | | Add PWMSS device tree nodes in relation with ECAP & EHRPWM DT nodes to AM33XX SoC family. Also populates device tree nodes for ECAP & EHRPWM by adding necessary properties like pwm-cells, base reg & set disabled as status. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: OMAP4460: Add bandgap entry for OMAP4460 devicesEduardo Valentin2013-06-181-0/+9
| | | | | | | | | Add bandgap devices for OMAP4460 devices. Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: OMAP443x: Add bandgap entry for OMAP443x devicesEduardo Valentin2013-06-181-0/+6
| | | | | | | | | | Add the bandgap entry for OMAP4430 devices. Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> [benoit.cousson@linaro.org: Add blank line and fix reg presentation] Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: TWL4030: fix mux and wakeup for SYS_NIRQ lineKevin Hilman2013-06-188-0/+32
| | | | | | | | | | | | | | | | | | | | On most OMAP3 platforms, the twl4030 IRQ line is connected to the SYS_NIRQ line on OMAP. Add another DTS include file (twl4030_omap3.dtsi) for boards that hook up the twl4030 this way to include. This allows RTC wake from off-mode to work again on OMAP3-based platforms with twl4030. Tested on 3530/Beagle, 3730/Beagle-xM, 3530/Overo, 3730/Overo-STORM. Special thanks to Florian Vaussard for suggesting use of preprocessor feature. Cc: Florian Vaussard <florian.vaussard@epfl.ch> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: OMAP3: beagle: enable user button via gpio_keys, enable wakeupKevin Hilman2013-06-182-0/+50
| | | | | | | | | | | | | | Using the gpio-keys bindings, configure the user button on Beagle boards. Since the user button is enabled as a wakeup source, also ensure the GPIO pin is mux'd correctly and has IO ring wakeups enabled, so it can also wakeup from off mode. Special thanks to Florian Vaussard for suggesting the preprocessor feature. Cc: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: OMAP3: beagle/overo: mux console UART, enable wakeupKevin Hilman2013-06-183-0/+40
| | | | | | | | | | | | | | Ensure the console uart (UART3) on these boards is mux'd correctly, and IO ring wakeup is enabled. This is needed for serial console wakeups when using DT boot. Thanks to Florian Vaussard for suggestion to use preprocessor features. Cc: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: omap5-uevm: Add uart pinctrl dataSourav Poddar2013-06-181-0/+41
| | | | | | | | | | | | | | Booting omap5 uevm results in the following error "did not get pins for uart error: -19" This happens because omap5 uevm dts file is not adapted to use uart through pinctrl framework. Populate uart pinctrl data to get rid of the error. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> [r.sricharan@ti.com: Replaced constants with preprocessor macros] Signed-off-by: Sricharan R <r.sricharan@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: omap5-uevm: Add LED support for uEVM blue LEDDan Murphy2013-06-181-0/+16
| | | | | | | | | | | Add support for blue LED 1 off of GPIO 153. Make the LED a heartbeat LED Configure the MUX for GPIO output. Signed-off-by: Dan Murphy <dmurphy@ti.com> [r.sricharan@ti.com: Replaced constants with preprocessor macros] Signed-off-by: Sricharan R <r.sricharan@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: omap5-uevm: Add USB Host supportRoger Quadros2013-06-182-0/+100
| | | | | | | | | | | | | Provide the RESET regulators for the USB PHYs, the USB Host port modes and the PHY devices. Also provide pin multiplexer information for the USB host pins. Signed-off-by: Roger Quadros <rogerq@ti.com> [r.sricharan@ti.com: Replaced constants with preprocessor macros] Signed-off-by: Sricharan R <r.sricharan@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: omap5: Make uevm as the official board and deprecate sevm supportSricharan R2013-06-182-81/+4
| | | | | | | | | | | | | | | | | | | | | | | The uevm is the only official board supported for the OMAP5 soc in mainline. The existent sevm platform will no more be supported. Hence cleaning up the board dts file to have only the data required for uevm. Renaming the board dts file and adding the following cleanups. * There are no devices connected on I2C 2,3,4 buses. So remove the pinmux data for the same. * OMAP5432 and DDR3 memory is used in the uevm. Temperature polling is not supported with DDR3 memories. Because of DDR3 phy limitation the voltage change across DVFS and all shadow registers for DVFS on DDR3 is not supported. Hence the emif kernel driver is not required, so removing the DDR3 device file and emif nodes for uevm. * Keypad is not supported on uevm. So remove the device node. Signed-off-by: Sricharan R <r.sricharan@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: OMAP4/AM35xx: Add missing dtb in the dtbs targetFlorian Vaussard2013-06-181-1/+4
| | | | | | | | When making the dtbs target on OMAP/AM35xx, some trees are not built. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: AM33XX: Use pinctrl constantsFlorian Vaussard2013-06-184-51/+52
| | | | | | | | | Using constants for pinctrl allows a better readability, and removes redundancy with comments. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Tested-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: AM33XX: Use existing constants for GPIOsFlorian Vaussard2013-06-184-19/+21
| | | | | | | | Use standard GPIO constants to enhance the readability of DT GPIOs. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Tested-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: AM3XXX: Use #include for all device treesFlorian Vaussard2013-06-186-8/+8
| | | | | | | | | | Replace /include/ by #include for AM33XX and AM35XX device tree files, in order to use the C pre-processor, making use of #define features possible. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Tested-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: AM43x: Initial supportAfzal Mohammed2013-06-181-0/+68
| | | | | | | | | | | | | DT source (minimal) for AM4372 SoC to represent AM43x SoC's. Those represented here are the minimal DT nodes necessary to get kernel booting. In DT nodes, "ti,hwmod" property has not been added, this would be added along with PRCM support for AM43x. Signed-off-by: Ankur Kishore <a-kishore@ti.com> Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: omap4-panda: Update the twl6040 gpio to macro definitionDan Murphy2013-06-181-1/+1
| | | | | | | | | Update the dt property ti,audpwron-gpio to use the gpio macro definition for GPIO_ACTIVE_HIGH. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: omap4-panda: Update the LED support for the pandaDan Murphy2013-06-182-1/+43
| | | | | | | | | | | | | | | | The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es are different. A1-A3 = gpio_wk7 ES = gpio_110 There is no change to LED D2 Abstract away the pinmux and the LED definitions for the two boards into the respective DTS files. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: OMAP2+: Use pinctrl constantsFlorian Vaussard2013-06-1812-158/+162
| | | | | | | | | | Using constants for pinctrl allows a better readability, and removes redundancy with comments. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: OMAP4/5: Use existing constants for IRQsFlorian Vaussard2013-06-186-128/+130
| | | | | | | | | | Use the constants defined in include/dt-bindings/interrupt-controller/ to enhance readability. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: OMAP2+: Use existing constants for GPIOsFlorian Vaussard2013-06-1813-28/+36
| | | | | | | | | Use standard GPIO constants to enhance the readability of DT GPIOs. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: OMAP2+: Use #include for all device treesFlorian Vaussard2013-06-1829-44/+44
| | | | | | | | | | Replace /include/ by #include for OMAP2+ DT, in order to use the C pre-processor, making use of #define features possible. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evmPhilip Avinash2013-06-181-0/+105
| | | | | | | | | | | | | GPMC controller on AM335x-EVM has a NAND flash connected to it. This patch updates following in am335x-evm.dts: - adds nandflash specific pin-mux configs - adds nand node as child of GPMC contoller, with information about NAND flash interface, NAND partition table, ECC scheme, elm handle id. - updates GPMC node for newer GPMC DT properties added in linux-3.10. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Gupta, Pekon <pekon@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: AM33XX: Add ELM nodePhilip, Avinash2013-06-181-0/+8
| | | | | | | | | | | ELM hardware engine is used for locating bit-flips in NAND data This patch is required for working of hardware based NAND ECC schemes with DT support. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: omap3-igep0030: Add NAND flash supportJavier Martinez Canillas2013-06-181-0/+50
| | | | | | | | | The IGEP COM Module has an 512MB NAND flash memory. Add a device node for this NAND and its partition layout. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: omap3-igep0020: Add NAND flash supportJavier Martinez Canillas2013-06-181-1/+49
| | | | | | | | | The IGEPv2 board has an 512MB NAND flash memory. Add a device node for this NAND and its partition layout. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: omap3-igep0020: Add SMSC911x LAN chip supportJavier Martinez Canillas2013-06-182-0/+59
| | | | | | | | | | | The IGEPv2 board has an SMSC LAN9221i ethernet chip connected to the OMAP3 processor though the General-Purpose Memory Controller. This patch adds a device node for the ethernet chip as a GPMC child and all its dependencies (regulators, GPIO and pin muxs). Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: AM33XX: Set pinmux for clkout2 pad used for clock outputVaibhav Hiremath2013-06-183-3/+21
| | | | | | | | | | | | xdma_event_intr1.clkout2 pad can be used to source clock from either 32K OSC or any of the PLL (except MPU) outputs. On the existing AM335x based boards (EVM, EVM-SK and Bone), this pad is used to feed the clock to audio codes. So, this patch configures the pinmux to get clkout2 on the pad. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: AM33XX: Add default pinctrl binding for UART0 deviceVaibhav Hiremath2013-06-183-0/+30
| | | | | | | | | Add pin control binding for UART0 device nodes in all board specific DT files. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Matt Porter <mporter@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: AM33XX: Fix uart numbering to match hardware/TRMVaibhav Hiremath2013-06-184-15/+15
| | | | | | | | | | | | With DT support, where naming convention is based on base-addr and not id, so we should follow TRM/Spec numbering label. This patch changes UART numbering as per TRM, as uart0-5. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Matt Porter <mporter@ti.com> Cc: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: AM33XX: Add pinctrl binding to gpio-leds nodeVaibhav Hiremath2013-06-182-2/+8
| | | | | | | | | | Now gpio-leds driver is using devm_pinctrl_get_select_default() api to set default pinmux configuration required for the functionality of the driver, so this patch moves respective pinctrl binding inside leds node. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: AM33XX: Add default pinctrl binding for I2C deviceVaibhav Hiremath2013-06-183-0/+40
| | | | | | | | | | | | Add pin control binding for I2C device nodes in all board specific DT files (as per current usage), EVM: Both i2c0 and i2c1 EVM-SK and Bone: Only i2c0 Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Matt Porter <mporter@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: OMAP4+: Remove multimedia carveoutsSuman Anna2013-06-182-16/+0
| | | | | | | | | | The carveouts that have been reserved for multimedia usecases are not being used currently by any driver and so have been cleaned up. Memory will be allocated runtime through CMA for enabling the multimedia usecases. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* Merge tag 'fixes-3.10-4' of git://git.infradead.org/users/jcooper/linux into ↵Olof Johansson2013-06-112-4/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fixes From Jason Cooper, mvebu fixes for v3.10 round 4: - mvebu - fix PCIe ranges property so NOR flash is visible - kirkwood - fix identification of 88f6282 so MPPs can be set correctly * tag 'fixes-3.10-4' of git://git.infradead.org/users/jcooper/linux: arm: mvebu: armada-xp-{gp,openblocks-ax3-4}: specify PCIe range ARM: Kirkwood: handle mv88f6282 cpu in __kirkwood_variant(). Signed-off-by: Olof Johansson <olof@lixom.net>
| * arm: mvebu: armada-xp-{gp,openblocks-ax3-4}: specify PCIe rangeThomas Petazzoni2013-06-062-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The ranges DT entry needed by the PCIe controller is defined at the SoC .dtsi level. However, some boards have a NOR flash, and to support it, they need to override the SoC-level ranges property to add an additional range. Since PCIe and NOR support came separately, some boards were not properly changed to include the PCIe range in their ranges property at the .dts level. This commit fixes those platforms. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | Merge tag 'omap-for-v3.10/fixes-v3.10-rc4' of ↵Olof Johansson2013-06-094-2/+45
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren, a set of small fixes for omaps for the -rc cycle: - am7303 iva2 reset PM regression fix - am33xx uart2 dma channel fix - am33xx gpmc properties fix - omap44xx rtc wake-up mux fix for nirq pins - omap36xx clock divider restore fix There's also one tiny non-critical .dts fix for omap5 timer pwm properties. * tag 'omap-for-v3.10/fixes-v3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: omap3: clock: fix wrong container_of in clock36xx.c ARM: dts: OMAP5: Fix missing PWM capability to timer nodes ARM: dts: omap4-panda|sdp: Fix mux for twl6030 IRQ pin and msecure line ARM: dts: AM33xx: Fix properties on gpmc node arm: omap2: fix AM33xx hwmod infos for UART2 ARM: OMAP3: Fix iva2_pwrdm settings for 3703
| * | ARM: dts: OMAP5: Fix missing PWM capability to timer nodesSuman Anna2013-06-031-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OMAP5 has 6 timers (GPTimers 5, 6, 8 to 11) that are capable of PWM. The PWM capability property is missing from the node definitions of couple of timers. Add ti,timer-pwm attribute for timer 5, 6, 8 and 11. Signed-off-by: Suman Anna <s-anna@ti.com> [benoit.cousson@linaro.org: Update changelog and subject to highlight the fix] Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
| * | ARM: dts: omap4-panda|sdp: Fix mux for twl6030 IRQ pin and msecure lineKevin Hilman2013-06-032-0/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Earlier commits ensured proper muxing of pins related to proper TWL6030 behavior: see commit 265a2bc8 (ARM: OMAP3: TWL4030: ensure sys_nirq1 is mux'd and wakeup enabled) and commit 1ef43369 (ARM: OMAP4: TWL: mux sys_drm_msecure as output for PMIC). However these only fixed legacy boot and not DT boot. For DT boot, the default mux values need to be set properly in DT. Special thanks to Nishanth Menon for the review and catching some major flaws in earlier versions. Tested on OMAP4430/Panda and OMAP4460/Panda-ES. Cc: Nishanth Menon <nm@ti.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> [benoit.cousson@linaro.org: Slightly change the subject to align board name with file name] Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
OpenPOWER on IntegriCloud