summaryrefslogtreecommitdiffstats
path: root/Documentation
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] x86_64: Better ATI timer fixAndi Kleen2006-02-261-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The previous experiment for using apicmaintimer on ATI systems didn't work out very well. In particular laptops with C2/C3 support often don't let it tick during idle, which makes it useless. There were also some other bugs that made the apicmaintimer often not used at all. I tried some other experiments - running timer over RTC and some other things but they didn't really work well neither. I rechecked the specs now and it turns out this simple change is actually enough to avoid the double ticks on the ATI systems. We just turn off IRQ 0 in the 8254 and only route it directly using the IO-APIC. I tested it on a few ATI systems and it worked there. In fact it worked on all chipsets (NVidia, Intel, AMD, ATI) I tried it on. According to the ACPI spec routing should always work through the IO-APIC so I think it's the correct thing to do anyways (and most of the old gunk in check_timer should be thrown away for x86-64). But for 2.6.16 it's best to do a fairly minimal change: - Use the known to be working everywhere-but-ATI IRQ0 both over 8254 and IO-APIC setup everywhere - Except on ATI disable IRQ0 in the 8254 - Remove the code to select apicmaintimer on ATI chipsets - Add some boot options to allow to override this (just paranoia) In 2.6.17 I hope to switch the default over to this for everybody. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs-2.6Linus Torvalds2006-02-241-0/+6
|\
| * NTFS: Do more detailed reporting of why we cannot mount read-write byAnton Altaparmakov2006-02-241-0/+6
| | | | | | | | | | | | special casing the VOLUME_MODIFIED_BY_CHKDSK flag. Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
* | [PATCH] tmpfs: recommend remount for mpolHugh Dickins2006-02-241-0/+9
|/ | | | | | | | | akpm points out that switching to a non-NUMA kernel could be irritating if mounting tmpfs fails on an mpol option: tmpfs.txt recommend remount. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Revert mount/umount uevent removalGreg Kroah-Hartman2006-02-221-0/+9
| | | | | | | | | | | | | | | This change reverts the 033b96fd30db52a710d97b06f87d16fc59fee0f1 commit from Kay Sievers that removed the mount/umount uevents from the kernel. Some older versions of HAL still depend on these events to detect when a new device has been mounted. These events are not correctly emitted, and are broken by design, and so, should not be relied upon by any future program. Instead, the /proc/mounts file should be polled to properly detect this kind of event. A feature-removal-schedule.txt entry has been added, noting when this interface will be removed from the kernel. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] tmpfs: fix mount mpol nodelist parsingHugh Dickins2006-02-211-9/+12
| | | | | | | | | | | | | | | | | | | | | | | I've been dissatisfied with the mpol_nodelist mount option which was added to tmpfs earlier in -rc. Replace it by mpol=policy:nodelist. And it was broken: a nodelist is a comma-separated list of numbers and ranges; the mount options are a comma-separated list of token=values. Whoops, blindly strsep'ing on commas doesn't work so well: since we've no numeric tokens, and unlikely to add them, use that to distinguish. Move the mpol= parsing to shmem_parse_mpol under CONFIG_NUMA, reject all its options as invalid if not NUMA. /proc shows MPOL_PREFERRED as "prefer", so use that name for the policy instead of "preferred". Enforce that mpol=default has no nodelist; that mpol=prefer has one node only; that mpol=bind has a nodelist; but let mpol=interleave use node_online_map if no nodelist given. Describe this in tmpfs.txt. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Robin Holt <holt@sgi.com> Acked-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] v9fs: update documentation and fix debug flagEric Van Hensbergen2006-02-201-6/+10
| | | | | | | | | | Minor updates to the documentation to bring them into sync with current websites and available features. The debug flag was switched back to hex to match the documentation. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] suspend-to-ram: allow video options to be set at runtimePavel Machek2006-02-201-0/+10
| | | | | | | | | | | | | | | | | | Currently, acpi video options can only be set on kernel command line. That's little inflexible; I'd like userland s2ram application that just works, and modifying kernel command line according to whitelist is not fun. It is better to just allow s2ram application to set video options just before suspend (according to the whitelist). This implements sysctl to allow setting suspend video options without reboot. (akpm: Documentation updates for this new sysctl are pending..) Signed-off-by: Pavel Machek <pavel@suse.cz> Cc: "Brown, Len" <len.brown@intel.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpu hotplug documentation fixHeiko Carstens2006-02-201-2/+7
| | | | | | | | | | | | Looks like there was a merge conflict when patches 8f8b1138fc9f65e3591aac83a4ee394fef34ac1d and 255acee706b333b79f593dd366f16e1f107cccc3 were applied which wasn't properly resolved. Fix this and add some additional description. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] s390: possible_cpus parameterHeiko Carstens2006-02-171-0/+6
| | | | | | | | | | | Introduce possible_cpus command line option. Hard sets the number of bits set in cpu_possible_map. Unlike the additional_cpus parameter this one guarantees that num_possible_cpus() will stay constant even if the system gets rebooted and a different number of cpus are present at startup. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] s390: additional_cpus parameterHeiko Carstens2006-02-171-5/+5
| | | | | | | | | | | | | | | Introduce additional_cpus command line option. By default no additional cpu can be attached to the system anymore. Only the cpus present at IPL time can be switched on/off. If it is desired that additional cpus can be attached to the system the maximum number of additional cpus needs to be specified with this option. This change is necessary in order to limit the waste of per_cpu data structures. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge branch 'release' of ↵Linus Torvalds2006-02-171-2/+12
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
| * [IA64] Count disabled cpus as potential hot-pluggable CPUsAshok Raj2006-02-161-2/+12
| | | | | | | | | | | | | | | | | | | | Minor updates to earlier patch. - Added to documentation to add ia64 as well. - Minor clarification on how to use disabled cpus - used plain max instead of max_t per Andew Morton. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
* | [PATCH] x86_64: Add boot option to disable randomized mappings and cleanupAndi Kleen2006-02-171-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | AMD SimNow!'s JIT doesn't like them at all in the guest. For distribution installation it's easiest if it's a boot time option. Also I moved the variable to a more appropiate place and make it independent from sysctl And marked __read_mostly which it is. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds2006-02-161-0/+23
|\ \
| * | [SCSI] megaraid_sas: support for 1078 type controller addedSumant Patro2006-02-041-0/+11
| | | | | | | | | | | | | | | | | | | | | This patch adds support for 1078 type controller (device id : 0x60). Signed-off-by: Sumant Patro <Sumant.Patro@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | [SCSI] megaraid_sas: register 16 byte CDB capabilityJoshua Giles2006-02-041-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch properly registers the 16 byte command length capability of the megaraid_sas controlled hardware with the scsi midlayer. All megaraid_sas hardware supports 16 byte CDB's. Signed-off-by: Joshua Giles <joshua_giles@dell.com> Signed-off-by: Sumant Patro <Sumant.Patro@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* | | [PATCH] mmconfig: add kernel parameter documentationBjorn Helgaas2006-02-151-0/+2
| |/ |/| | | | | | | | | | | | | Mention the "pci=nommconf" option in kernel-parameters.txt. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] FRV: Use virtual interrupt disablementDavid Howells2006-02-141-0/+234
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make the FRV arch use virtual interrupt disablement because accesses to the processor status register (PSR) are relatively slow and because we will soon have the need to deal with multiple interrupt controls at the same time (separate h/w and inter-core interrupts). The way this is done is to dedicate one of the four integer condition code registers (ICC2) to maintaining a virtual interrupt disablement state whilst inside the kernel. This uses the ICC2.Z flag (Zero) to indicate whether the interrupts are virtually disabled and the ICC2.C flag (Carry) to indicate whether the interrupts are physically disabled. ICC2.Z is set to indicate interrupts are virtually disabled. ICC2.C is set to indicate interrupts are physically enabled. Under normal running conditions Z==0 and C==1. Disabling interrupts with local_irq_disable() doesn't then actually physically disable interrupts - it merely sets ICC2.Z to 1. Should an interrupt then happen, the exception prologue will note ICC2.Z is set and branch out of line using one instruction (an unlikely BEQ). Here it will physically disable interrupts and clear ICC2.C. When it comes time to enable interrupts (local_irq_enable()), this simply clears the ICC2.Z flag and invokes a trap #2 if both Z and C flags are clear (the HI integer condition). This can be done with the TIHI conditional trap instruction. The trap then physically reenables interrupts and sets ICC2.C again. Upon returning the interrupt will be taken as interrupts will then be enabled. Note that whilst processing the trap, the whole exceptions system is disabled, and so an interrupt can't happen till it returns. If no pending interrupt had happened, ICC2.C would still be set, the HI condition would not be fulfilled, and no trap will happen. Saving interrupts (local_irq_save) is simply a matter of pulling the ICC2.Z flag out of the CCR register, shifting it down and masking it off. This gives a result of 0 if interrupts were enabled and 1 if they weren't. Restoring interrupts (local_irq_restore) is then a matter of taking the saved value mentioned previously and XOR'ing it against 1. If it was one, the result will be zero, and if it was zero the result will be non-zero. This result is then used to affect the ICC2.Z flag directly (it is a condition code flag after all). An XOR instruction does not affect the Carry flag, and so that bit of state is unchanged. The two flags can then be sampled to see if they're both zero using the trap (TIHI) as for the unconditional reenablement (local_irq_enable). This patch also: (1) Modifies the debugging stub (break.S) to handle single-stepping crossing into the trap #2 handler and into virtually disabled interrupts. (2) Removes superseded fixup pointers from the second instructions in the trap tables (there's no a separate fixup table for this). (3) Declares the trap #3 vector for use in .org directives in the trap table. (4) Moves irq_enter() and irq_exit() in do_IRQ() to avoid problems with virtual interrupt handling, and removes the duplicate code that has now been folded into irq_exit() (softirq and preemption handling). (5) Tells the compiler in the arch Makefile that ICC2 is now reserved. (6) Documents the in-kernel ABI, including the virtual interrupts. (7) Renames the old irq management functions to different names. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] kprobes: Update Documentation/kprobes.txtJim Keniston2006-02-141-39/+42
| | | | | | | | | | | | | | | | | | | | Update Documentation/kprobes.txt to reflect Kprobes enhancements and other recent developments. Acked-by: Ananth Mavinakayanahalli <mananth@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [MIPS] Update docs to reflect the latest status of the Alchemy IDE driver.Ralf Baechle2006-02-141-1/+5
| | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | [PATCH] w83627hf: Document the reset module parameterJean Delvare2006-02-131-0/+4
| | | | | | | | | | | | | | | | Document the reset module parameter which was recently added to the w83627hf driver. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [PATCH] powerpc: Add FSL USB node to documentationBecky Bruce2006-02-101-1/+59
| | | | | | | | | | | | | | | | | | Updated the documentation to include the definition of the USB device node format for Freescale SOC devices. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-mergeLinus Torvalds2006-02-071-0/+8
|\ \
| * | [PATCH] documentation/powerpc: add bus-frequency property to SOC nodeBecky Bruce2006-02-071-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | Updated SOC node definition in documentation to include bus-frequency property. Also extended mdio example to match specification. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Kumar Gala <galak@gate.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* | | Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds2006-02-071-6/+17
|\ \ \
| * | | [PATCH] SPI: spi_butterfly, restore lost deltasDavid Brownell2006-02-061-6/+17
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | This resolves some minor version skew glitches that accumulated for the AVR Butterfly adapter driver, which caused among other things the existence of a duplicate Kconfig entry. Most of it boils down to comment updates, but in one case it removes some now-superfluous code that would be better if not copied into other controller-level drivers. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* | | Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6Linus Torvalds2006-02-075-4/+134
|\ \ \
| * | | [PATCH] hwmon: Fix reboot on it87 driver loadJean Delvare2006-02-062-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Only scan I2C address 0x2d. This is the default address and no IT87xxF chip was ever seen on I2C at a different address. These chips are better accessed through their ISA interface anyway. This fixes bug #5889, although it doesn't address the whole class of problems. We'd need the ability to blacklist arbitrary I2C addresses on systems known to contain I2C devices which behave badly when probed. Plan the I2C interface for removal as well. If nobody complains within a year, it will confirm my impression that the I2C interface isn't actually needed by anyone. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | [PATCH] hwmon: New f71805f driverJean Delvare2006-02-061-1/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is my f71805f hardware monitoring driver ported from lm_sensors to Linux 2.6. This new driver differs from the other hardware monitoring drivers in that it is implemented as a platform driver. This might not be optimal yet (we would probably need a generic infrastructure and bus type for Super-I/O logical devices) but it is certainly much better than the i2c-isa solution. Note that this driver requires lm_sensors CVS. I hope to get it released as 2.10.0 soon. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | [PATCH] hwmon: Add f71805f documentationJean Delvare2006-02-061-0/+105
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add some documentation for the new f71805f driver. This is almost the same help that was present in lm_sensors, with a few minor layout fixes. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | [PATCH] i2c: Rename i2c-sis96x documentation fileRudolf Marek2006-02-061-2/+2
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | This patch just renames the documentation file to correct file name. i2c-sis69x -> i2c-sis96x. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | [PATCH] unshare system call -v5: Documentation fileJANAK DESAI2006-02-071-0/+295
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Documents the new feature, why it is needed, it's cost, design, implementation, and test plan. Signed-off-by: Janak Desai <janak@us.ibm.com> Cc: Al Viro <viro@ftp.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Andi Kleen <ak@muc.de> Cc: Paul Mackerras <paulus@samba.org> Acked-by: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | Merge branch 'origin'Mauro Carvalho Chehab2006-02-0630-435/+2607
|\ \ \ | |/ /
| * | [PATCH] x86_64: Calibrate APIC timer using PM timerAndi Kleen2006-02-041-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some broken motherboards (at least one NForce3 based AMD64 laptop) the PIT timer runs at a incorrect frequency. This patch adds a new option "apicpmtimer" that allows to use the APIC timer and calibrate it using the PMTimer. It requires the earlier patch that allows to run the main timer from the APIC. Specifying apicpmtimer implies apicmaintimer. The option defaults to off for now. I tested it on a few systems and the resulting APIC timer frequencies were usually a bit off, but always <1%, which should be tolerable. TBD figure out heuristic to enable this automatically on the affected systems TBD perhaps do it on all NForce3s or using DMI? Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * | [PATCH] x86_64: Allow to run main time keeping from the local APIC interruptAndi Kleen2006-02-041-0/+7
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Another piece from the no-idle-tick patch. This can be enabled with the "apicmaintimer" option. This is mainly useful when the PIT/HPET interrupt is unreliable. Note there are some systems that are known to stop the APIC timer in C3. For those it will never work, but this case should be automatically detected. It also only works with PM timer right now. When HPET is used the way the main timer handler computes the delay doesn't work. It should be a bit more efficient because there is one less regular interrupt to process on the boot processor. Requires earlier bugfix from Venkatesh Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * Merge branch 'upstream-linus' of git://oss.oracle.com/home/sourcebo/git/ocfs2Linus Torvalds2006-02-032-0/+3
| |\
| | * configfs: Add permission and ownership to configfs objects.Joel Becker2006-02-031-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | configfs always made item and attribute ownership root.root and permissions based on a umask of 022. Add ->setattr() to allow chown(2)/chmod(2), and persist the changes for the lifetime of the items and attributes. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
| | * [OCFS2] Documentation FixJ. Bruce Fields2006-02-031-0/+1
| | | | | | | | | | | | | | | | | | | | | Update ocfs2.txt to add "cluster aware lockf" under missing features. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
| * | Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2006-02-031-0/+17
| |\ \
| | * | [IPV4]: Document icmp_errors_use_inbound_ifaddr sysctlHorms2006-02-021-0/+17
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Taken largely from the commit of the patch that added this feature: 1c2fb7f93cb20621772bf304f3dba0849942e5db I'm not sure about the ordering of the options in sysctl.txt, so I took a wild guess about where it fits. Signed-Off-By: Horms <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | [PATCH] Export cpu topology in sysfsZhang, Yanmin2006-02-031-0/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch implements cpu topology exportation by sysfs. Items (attributes) are similar to /proc/cpuinfo. 1) /sys/devices/system/cpu/cpuX/topology/physical_package_id: represent the physical package id of cpu X; 2) /sys/devices/system/cpu/cpuX/topology/core_id: represent the cpu core id to cpu X; 3) /sys/devices/system/cpu/cpuX/topology/thread_siblings: represent the thread siblings to cpu X in the same core; 4) /sys/devices/system/cpu/cpuX/topology/core_siblings: represent the thread siblings to cpu X in the same physical package; To implement it in an architecture-neutral way, a new source file, driver/base/topology.c, is to export the 5 attributes. If one architecture wants to support this feature, it just needs to implement 4 defines, typically in file include/asm-XXX/topology.h. The 4 defines are: #define topology_physical_package_id(cpu) #define topology_core_id(cpu) #define topology_thread_siblings(cpu) #define topology_core_siblings(cpu) The type of **_id is int. The type of siblings is cpumask_t. To be consistent on all architectures, the 4 attributes should have deafult values if their values are unavailable. Below is the rule. 1) physical_package_id: If cpu has no physical package id, -1 is the default value. 2) core_id: If cpu doesn't support multi-core, its core id is 0. 3) thread_siblings: Just include itself, if the cpu doesn't support HT/multi-thread. 4) core_siblings: Just include itself, if the cpu doesn't support multi-core and HT/Multi-thread. So be careful when declaring the 4 defines in include/asm-XXX/topology.h. If an attribute isn't defined on an architecture, it won't be exported. Thank Nathan, Greg, Andi, Paul and Venki. The patch provides defines for i386/x86_64/ia64. Signed-off-by: Zhang, Yanmin <yanmin.zhang@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * | [PATCH] parport: fix documentationArnaud Giersch2006-02-031-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | Fix documentation to actually match the code. Signed-off-by: Arnaud Giersch <arnaud.giersch@free.fr> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * | [PATCH] Documentation: Updated PCI Error RecoveryLinas Vepstas2006-02-031-161/+311
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is a cleanup/restructuring/clarification of the PCI error handling doc. It should look rather professional at this point. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * | [PATCH] Clean up Documentation/driver-model/overview.txtLinas Vepstas2006-02-031-32/+25
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Edits to the driver-model documentation for grammar, clarity and content. These docs haven't been updated in years, and some of the technical content and discussion has become stale; this patch updates these. In addition, some of the language is awkward. Fix this. (I'm trying to cleanup the other files in this directory also, patches for these will come a bit later). Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Acked-by: Patrick Mochel <mochel@digitalimplant.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/perex/alsaLinus Torvalds2006-02-012-3/+11
| |\
| | * [ALSA] fix typos in writing-an-alsa-driverGiuliano Pochini2006-02-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Modules: Documentation Fixed typos in writing-an-alsa-driver document. Signed-off-by: Giuliano Pochini <pochini@shiny.it> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * [ALSA] intel8x0 - Add MCP51 PCI IDTakashi Iwai2006-02-011-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | Modules: Documentation,Intel8x0 driver Added MCP51 PCI ID to intel8x0 driver. Also, updated the supported chips in documentation. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | Merge branch 'release' of ↵Linus Torvalds2006-02-011-0/+5
| |\ \ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
| | | \
| | | \
| | | \
| | | \
| | | \
| | | \
| | | \
| | | \
| | *-------. \ [ACPI] merge 3549 4320 4485 4588 4980 5483 5651 acpica asus fops pnpacpi ↵Len Brown2006-01-241-0/+5
| | |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | branches into release Signed-off-by: Len Brown <len.brown@intel.com>
OpenPOWER on IntegriCloud