summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* pinctrl: Qualcomm SPMI PMIC MPP pin controller driverIvan T. Ivanov2014-10-292-0/+950
| | | | | | | | | This is the pinctrl, pinmux, pinconf and gpiolib driver for the Qualcomm MPP sub-function blocks found in the PMIC chips. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: Qualcomm SPMI PMIC GPIO pin controller driverIvan T. Ivanov2014-10-293-0/+947
| | | | | | | | | This is the pinctrl, pinmux, pinconf and gpiolib driver for the Qualcomm GPIO sub-function blocks found in the PMIC chips. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: Device tree bindings for Qualcomm PMIC MPP blockIvan T. Ivanov2014-10-292-0/+206
| | | | | | | | | DeviceTree binding documentation for Qualcomm SPMI PMIC MPP pinctrl drivers. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: Device tree bindings for Qualcomm PMIC GPIO blockBjorn Andersson2014-10-292-0/+357
| | | | | | | | | This introduced the device tree bindings for the GPIO block found in PMIC's from Qualcomm. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: at91: use own headerAlexandre Belloni2014-10-293-4/+74
| | | | | | | | | | Copy the mach/at91_pio.h header locally and use it for pinctrl-at91.c. This allows to remove the dependency on mach/at91_pio.h to be able to move at91 to multiplatform. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl-tb10x: remove duplicate check on resourceVarka Bhadram2014-10-281-6/+2
| | | | | | | Sanity check on resource happening with devm_ioremap_resource(). Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: pinconf-generic: Add flag to print argumentsSoren Brinkmann2014-10-281-28/+37
| | | | | | | | | | | | | When dumping pinconf information in debugfs, config arguments are only printed when a unit is present and the argument is != 0. For parameters like the slew rate, this does not work. The slew rate uses a driver specific format for the argument, i.e. 0 can be a valid argument and a unit is not provided for it. For that reason, add a flag to enable printing the argument instead of inferring it from the presence of a unit and the value of the argument. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: tegra-xusb: Don't leak configurationsThierry Reding2014-10-281-7/+12
| | | | | | | | | The pinctrl config helpers make a separate copy of the configuration, so callers must make sure to free any dynamically allocated memory that was used to store it. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: baytrail: add missing module removal supportFelipe Balbi2014-10-281-1/+6
| | | | | | | | | | | pinctrl-baytrail driver provides a proper ->remove() method on its platform_driver definition, however there's no way, currently, to unload the driver due to missing module_exit(). This patch adds module_exit(). Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: imx: add gpio pinmux support for vf610Stefan Agner2014-10-281-0/+72
| | | | | | | | | | Add pinmux support for GPIO for Vybrid (vf610) IOMUX controller. This is needed since direction configuration is not part of the GPIO module in Vybrid. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: st: Fix Sparse errorPramod Gurav2014-10-211-1/+1
| | | | | | | | | | | | | | This change fixes below sparse error, drivers/pinctrl/pinctrl-st.c:1515:31: error: incompatible types for operation (>) drivers/pinctrl/pinctrl-st.c:1515:31: left side has type void [noderef] <asn:2>*irqmux_base drivers/pinctrl/pinctrl-st.c:1515:31: right side has type int Cc: Maxime Coquelin <maxime.coquelin@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> CC: Linus Walleij <linus.walleij@linaro.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: nomadik: amend MMC/SD pinsLinus Walleij2014-10-201-1/+3
| | | | | | | There is a missing MMC/SD pin for MCDATDIR2 which is routed as alt B, add it to the MMC/SD pin group and functions. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: abx500: mark pin config as genericLinus Walleij2014-10-201-0/+1
| | | | | | This is generic pin configuration, so add .is_generic. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: abx500: update device tree bindingsLinus Walleij2014-10-201-109/+75
| | | | | | | | After force converting the ABx500 bindings in the driver and device tree sources, also update the binding documentation to state that we are now using standard bindings. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: abx500: retire phandle config mechanismLinus Walleij2014-10-201-13/+1
| | | | | | | | | The abx500 pin control driver supported a method of fetching the generic config from a phandle to a separate node using the "ste,config" as a phandle. This is not used in any device trees and not documented in the bindings, so drop this support. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: abx500: force-convert to generic config bindingsLinus Walleij2014-10-203-44/+44
| | | | | | | | | This converts the ABx500 pin controller and all associated device trees to use the standard, generic config bindings for pin controllers. There are no such device trees deployed in the wild so this is safe to do to set a good example. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: nomadik: force-convert to generic config bindingsLinus Walleij2014-10-2010-148/+148
| | | | | | | | | This converts the Nomadik pin controller and all associated device trees to use the standard, generic config bindings for pin controllers. There are no such device trees deployed in the wild so this is safe to do to set a good example. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: abx500: force-convert to generic mux bindingsLinus Walleij2014-10-203-90/+94
| | | | | | | | | This converts the ABx500 pin controller and all associated device trees to use the standard, generic mux bindings for pin controllers. There are no such device trees deployed in the wild so this is safe to do to set a good example. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: nomadik: force-convert to generic mux bindingsLinus Walleij2014-10-207-84/+88
| | | | | | | | | This converts the Nomadik pin controller and all associated device trees to use the standard, generic mux bindings for pin controllers. There are no such device trees deployed in the wild so this is safe to do to set a good example. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Linux 3.18-rc1v3.18-rc1Linus Torvalds2014-10-191-2/+2
|
* Merge tag 'arm-soc-fixes-rc1' of ↵Linus Torvalds2014-10-1920-20/+176
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A batch of fixes that have come in during the merge window. Some of them are defconfig updates for things that have now landed, some errata additions and a few general scattered fixes. There's also a qcom DT update that adds support for SATA on AP148, and basic support for Sony Xperia Z1 and CM-QS600 platforms that seemed isolated enough that we could merge it even if it's late" * tag 'arm-soc-fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: corrected bcm2835 search ARM: dts: Explicitly set dr_mode on exynos5420-arndale-octa ARM: dts: Explicitly set dr_mode on exynos Peach boards ARM: dts: qcom: add CM-QS600 board ARM: dts: qcom: Add initial DTS file for Sony Xperia Z1 phone ARM: dts: qcom: Add SATA support on IPQ8064/AP148 MAINTAINERS: Update Santosh Shilimkar's email id ARM: sunxi_defconfig: enable CONFIG_REGULATOR ARM: dts: Disable smc91x on n900 until bootloader dependency is removed ARM: omap2plus_defconfig: Enable ARM erratum 430973 for omap3 ARM: exynos_defconfig: enable USB gadget support ARM: exynos_defconfig: Enable Maxim 77693 and I2C GPIO drivers ARM: mm: Fix ifdef around cpu_*_do_[suspend, resume] ops ARM: EXYNOS: Fix build with PM_SLEEP=n and ARM_EXYNOS_CPUIDLE=n ARM: SAMSUNG: Restore Samsung PM Debug functionality ARM: dts: Fix pull setting in sd4_width8 pin group for exynos4x12 ARM: exynos_defconfig: Enable SBS battery support ARM: exynos_defconfig: Enable Control Groups support ARM: exynos_defconfig: Enable Atmel maXTouch support ARM: exynos_defconfig: Enable MAX77802
| * Merge tag 'qcom-dt-for-3.18-3' of ↵Olof Johansson2014-10-196-1/+121
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into fixes Merge "qcom DT changes for v3.18-3" from Kumar Gala: Qualcomm ARM Based Device Tree Updates for v3.18-3 * Added Board support for CM-QS600 and Sony Xperia Z1 phone * Added SATA support on IPQ8064/AP148 * tag 'qcom-dt-for-3.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom: ARM: dts: qcom: add CM-QS600 board ARM: dts: qcom: Add initial DTS file for Sony Xperia Z1 phone ARM: dts: qcom: Add SATA support on IPQ8064/AP148
| | * ARM: dts: qcom: add CM-QS600 boardMike Rapoport2014-10-162-0/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CM-QS600 is a APQ8064 based computer on module. The details are available at http://compulab.co.il/products/computer-on-modules/cm-qs600/ Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Kumar Gala <galak@codeaurora.org>
| | * ARM: dts: qcom: Add initial DTS file for Sony Xperia Z1 phoneTim Bird2014-10-163-1/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | This DTS has support for the Sony Xperia Z1 phone (codenamed Honami). This first version of the DTS supports just a serial console. Signed-off-by: Tim Bird <tim.bird@sonymobile.com> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Kumar Gala <galak@codeaurora.org>
| | * ARM: dts: qcom: Add SATA support on IPQ8064/AP148Kumar Gala2014-10-162-0/+41
| | | | | | | | | | | | | | | | | | | | | Add SATA PHY and SATA AHCI controller nodes to device tree to enable generic ahci support on the IPQ8064/AP148 board. Signed-off-by: Kumar Gala <galak@codeaurora.org>
| * | Merge tag 'samsung-fixes-2' of ↵Olof Johansson2014-10-194-2/+22
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Pull more fixes from Kukjin Kim: 2nd Samsung fixes for v3.18 - Explicitly set dr_mode on exynos5800-peach-pi, exynos5420-peach-pit and exynos5420-arndale-octa boards, because the USB dwc3 controller will not work properly without dr_mode as host on above boards if the USB host and gadget are enabled in kernel configuration both. * tag 'samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Explicitly set dr_mode on exynos5420-arndale-octa ARM: dts: Explicitly set dr_mode on exynos Peach boards Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | ARM: dts: Explicitly set dr_mode on exynos5420-arndale-octaSjoerd Simons2014-10-171-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Explicitly set the dr_mode for the second dwc3 controller on the Arndale Octa board to host mode. This is required to ensure the controller is initialized in the right mode if the kernel is build with USB gadget support. Reported-By: Andreas Faerber <afaerber@suse.de> Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | ARM: dts: Explicitly set dr_mode on exynos Peach boardsSjoerd Simons2014-10-173-2/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case the optional dr_mode property isn't set in the dwc3 nodes the the controller will go into OTG mode if both USB host and USB gadget functionality are enabled in the kernel configuration. Unfortunately this results in USB not working on exynos5420-peach-pit and exynos5800-peach-pi with such a kernel configuration unless manually change the mode. To resolve that explicitly configure the dual role mode as host. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Andreas Faerber <afaerber@suse.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| * | | MAINTAINERS: corrected bcm2835 searchScott Branden2014-10-191-6/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Corrected bcm2835 maintainer info by using N: to specify any files with bcm2835 in are directed to the proper maintainer. Also corrected minor mispelling of ARCHITECTURE in 2 comment locations. Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | MAINTAINERS: Update Santosh Shilimkar's email idSantosh Shilimkar2014-10-141-7/+7
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | Merge tag 'samsung-defconfig' of ↵Olof Johansson2014-10-141-0/+10
| |\ \ \ | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Merge "Samsung defconfig, actually exynos_defconig updates for v3.18" from Kukjin Kim: - enable USB gadget support - enable Maxim77802 support - enable Maxim77693 and I2C GPIO drivers - enable Atmel maXTouch support - enable SBS battery support - enable Control Groups support * tag 'samsung-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: exynos_defconfig: enable USB gadget support ARM: exynos_defconfig: Enable Maxim 77693 and I2C GPIO drivers ARM: exynos_defconfig: Enable SBS battery support ARM: exynos_defconfig: Enable Control Groups support ARM: exynos_defconfig: Enable Atmel maXTouch support ARM: exynos_defconfig: Enable MAX77802 Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | ARM: exynos_defconfig: enable USB gadget supportSjoerd Simons2014-09-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable USB gadget support without support for any specific gadgets to more easily catch cases where a devices dts doesn't specify the usb controllers dr_mode while it should. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | ARM: exynos_defconfig: Enable Maxim 77693 and I2C GPIO driversKrzysztof Kozlowski2014-09-241-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Exynos System-on-Chips have ~7 distinctive I2C IO ports (exact number depends on chip). However some integrated circuits on board, also using I2C protocol for communication, can be connected to the SoC by other GPIO. Enabling the I2C GPIO driver allows using such additional integrated circuits. An example of such chip using I2C and connected over GPIO to SoC is Maxim 77693 MUIC on Trats2 board. The regulator driver of Maxim 77693 offers charger and safeout LDO (necessary for USB OTG). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | ARM: exynos_defconfig: Enable SBS battery supportJavier Martinez Canillas2014-09-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many Exynos5 boards (e.g: Snow, Peach Pit and Pi) have a SBS-compliant gas gauge battery. Enable to built it so the needed support is available for these boards. Suggested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | ARM: exynos_defconfig: Enable Control Groups supportJavier Martinez Canillas2014-09-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | systemd needs control groups support to be enabled in the kernel so let's enable it by default since is quite likely that a user-space with systemd will be used. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | ARM: exynos_defconfig: Enable Atmel maXTouch supportJavier Martinez Canillas2014-09-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many Exynos based Chromebooks have an Atmel trackpad so enable support for it by default will make easier for users. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | ARM: exynos_defconfig: Enable MAX77802Vivek Gautam2014-09-241-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enabled MAX77802 pmic for exynos systems. One config USB_ANNOUNCE_NEW_DEVICES to display device information on connect. Another config for I2C_CHARDEV to see i2c device nodes. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| * | | Merge tag 'samsung-fixes' of ↵Olof Johansson2014-10-145-4/+8
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Merge "Samsung fixes for v3.18" from Kukjin Kim: - fix ifdef around cpu_*_do_[suspend, resume] ops to check CONFIG_ARM_CPU_SUSPEND and not CONFIG_PM_SLEEP - fix exynos_defconfig build with PM_SLEEP=n and ARM_EXYNOS_CPUIDLE=n - fix enabling Samsung PM debug functionality due to recently merged patches and previous merge conflicts - fix pull-up setting in sd4_width8 pin group for exynos4x12 * tag 'samsung-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: mm: Fix ifdef around cpu_*_do_[suspend, resume] ops ARM: EXYNOS: Fix build with PM_SLEEP=n and ARM_EXYNOS_CPUIDLE=n ARM: SAMSUNG: Restore Samsung PM Debug functionality ARM: dts: Fix pull setting in sd4_width8 pin group for exynos4x12 Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | ARM: mm: Fix ifdef around cpu_*_do_[suspend, resume] opsBartlomiej Zolnierkiewicz2014-09-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ifdef around cpu_\name\()_do_suspend and cpu_\name\()_do_resume ops in proc-macros.S should check for CONFIG_ARM_CPU_SUSPEND and not CONFIG_PM_SLEEP. Fix it. [ Please note that cpu_v7_do_[suspend,resume] code in proc-v7.S already correctly checks for CONFIG_ARM_CPU_SUSPEND, same is true for functions for other architectures. ] This fix is needed for decoupling suspend/resume and advanced cpuidle support on Exynos platform (next patch fixes build for config with CONFIG_PM_SLEEP=n and CONFIG_ARM_EXYNOS_CPUIDLE=y). If this fix is not present then the following OOPS happens on the first attempt to go into advanced cpuidle mode (AFTR): [ 22.244143] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 22.250759] pgd = c0004000 [ 22.253445] [00000000] *pgd=00000000 [ 22.257012] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM [ 22.262906] Modules linked in: [ 22.265949] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.16.0-next-20140811-dirty #730 [ 22.273757] task: c05dce68 ti: c05d2000 task.ti: c05d2000 [ 22.279139] PC is at 0x0 [ 22.281661] LR is at __cpu_suspend_save+0x4c/0xa8 [ 22.286344] pc : [<00000000>] lr : [<c00125e0>] psr: a0000093 [ 22.286344] sp : c05d3ef4 ip : c05da414 fp : 00000001 [ 22.297799] r10: c05da414 r9 : c0609cb0 r8 : 0000000f [ 22.303008] r7 : c05da444 r6 : 00000038 r5 : ea802c00 r4 : c05d3f14 [ 22.309517] r3 : 00000000 r2 : c05d3f4c r1 : 00000038 r0 : c05d3f20 [ 22.316029] Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel [ 22.323406] Control: 10c5387d Table: 69d5404a DAC: 00000015 [ 22.329135] Process swapper/0 (pid: 0, stack limit = 0xc05d2240) [ 22.335124] Stack: (0xc05d3ef4 to 0xc05d4000) [ 22.339466] 3ee0: ea802c00 00000038 c05d3f4c [ 22.347626] 3f00: 00000000 00000007 c00123bc 00000000 c001d468 6a888000 c05d3f4c 80000000 [ 22.355785] 3f20: 00000007 c003d3a0 0000193d eaf9dde4 eaf9dde4 c02ef0c8 c000969c fffffffe [ 22.363944] 3f40: 00000000 c0037b54 eaf9dbb8 e9d1a380 00000000 c001d468 c0609cb0 00000000 [ 22.372103] 3f60: c0609cb0 c061649e 00000001 c001250c eaf9dbb8 00000001 c0609cb0 c001d618 [ 22.380262] 3f80: c001d5d0 c02ef56c 2d9d2e1e 00000005 eaf9dbb8 c02edcc4 2d9d2e1e 00000005 [ 22.388421] 3fa0: c040446c c05da4ec c040446c eaf9dbb8 c05cfbb0 c004c580 c05dce68 c05b3ae8 [ 22.396580] 3fc0: 00000000 c058bb24 ffffffff ffffffff c058b5e4 00000000 00000000 c05b3ae8 [ 22.404740] 3fe0: c0616994 c05da47c c05b3ae4 c05ddeec 4000406a 40008074 00000000 00000000 [ 22.412909] [<c00125e0>] (__cpu_suspend_save) from [<c00123bc>] (__cpu_suspend+0x5c/0x70) [ 22.421074] [<c00123bc>] (__cpu_suspend) from [<c05d3f4c>] (init_thread_union+0x1f4c/0x2000) [ 22.429479] Code: bad PC value [ 22.432518] ---[ end trace fb90ebf4217d0ad9 ]--- [ 22.437116] Kernel panic - not syncing: Attempted to kill the idle task! [ 22.443800] Rebooting in 5 seconds.. This patch has been tested on Exynos4210 based Origen board. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | | ARM: EXYNOS: Fix build with PM_SLEEP=n and ARM_EXYNOS_CPUIDLE=nBartlomiej Zolnierkiewicz2014-09-241-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix building of exynos_defconfig with disabled CONFIG_PM_SLEEP by adding checking whether Exynos cpuidle support is enabled before accessing exynos_enter_aftr. The build error message: arch/arm/mach-exynos/built-in.o:(.data+0x74): undefined reference to `exynos_enter_aftr' make: *** [vmlinux] Error 1 This patch has been tested on Exynos4210 based Origen board. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | | ARM: SAMSUNG: Restore Samsung PM Debug functionalityTomasz Figa2014-09-242-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to recently merged patches and previous merge conflicts, the Samsung PM Debug functionality no longer can be enabled. This patch fixes incorrect dependency of SAMSUNG_PM_DEBUG on an integer symbol and adds missing header inclusion. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | | ARM: dts: Fix pull setting in sd4_width8 pin group for exynos4x12Tomasz Figa2014-09-241-1/+1
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The group has the samsung,pin-pud property set to 4, which is not a correct value. This patch fixes this by replacing it with 3, which is the correct value for pull-up. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| * | | Merge tag 'fixes-for-v3.18-merge-window' of ↵Olof Johansson2014-10-142-0/+4
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge "Two omap fixes for v3.18 merge window" from Tony Lindgren: Two omap fixes for issues noticed during the merge window: - We need to enable ARM errata 430973 for omap3 - The smc91x on some early n900 boards need to be disabled for now until the dependencies to specific a bootloader version are fixed * tag 'fixes-for-v3.18-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Disable smc91x on n900 until bootloader dependency is removed ARM: omap2plus_defconfig: Enable ARM erratum 430973 for omap3 Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | ARM: dts: Disable smc91x on n900 until bootloader dependency is removedTony Lindgren2014-10-091-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I added smc91x support but turns out we currently do not set the smc91x timings in gpmc.c but rely on the bootloader timings. This produces the following error unless the smc91x GPMC timings are initialized by the bootloader: Unhandled fault: external abort on non-linefetch (0x1008) at 0xd080630e ... [<c04067fc>] (smc_drv_probe) from [<c038e9c4>] (platform_drv_probe+0x2c/0x5c) [<c038e9c4>] (platform_drv_probe) from [<c038d450>] (driver_probe_device+0x104/0x22c) [<c038d450>] (driver_probe_device) from [<c038d60c>] (__driver_attach+0x94/0x98) [<c038d60c>] (__driver_attach) from [<c038bc3c>] (bus_for_each_dev+0x54/0x88) [<c038bc3c>] (bus_for_each_dev) from [<c038cc3c>] (bus_add_driver+0xd8/0x1d8) [<c038cc3c>] (bus_add_driver) from [<c038dd74>] (driver_register+0x78/0xf4) [<c038dd74>] (driver_register) from [<c0008924>] (do_one_initcall+0x80/0x1c0) [<c0008924>] (do_one_initcall) from [<c0852d9c>] (kernel_init_freeable+0x1b8/0x28c) [<c0852d9c>] (kernel_init_freeable) from [<c05ce86c>] (kernel_init+0x8/0xec) [<c05ce86c>] (kernel_init) from [<c000e728>] (ret_from_fork+0x14/0x2c) Let's fix the issue by disabling the smc91x module for now until we have sorted out the issues in gpmc.c. Reported-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | ARM: omap2plus_defconfig: Enable ARM erratum 430973 for omap3Tony Lindgren2014-10-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Somehow we don't have this set in omap2plus_defconfig. Without this apps can segfault randomly on omap3. I can reproduce this easily on am37xx-evm by doing apt-get update over NFSroot. Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | | ARM: sunxi_defconfig: enable CONFIG_REGULATOROlof Johansson2014-10-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 97a13e5289ba ('net: phy: mdio-sun4i: don't select REGULATOR') removed the select of REGULATOR, which means that it now has to be explicitly enabled in the defconfig or things won't work very well. In particular, this fixes a problem with SD/MMC not probing on my A31-based board. Cc: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
* | | | | Merge git://git.infradead.org/users/eparis/auditLinus Torvalds2014-10-1943-180/+204
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull audit updates from Eric Paris: "So this change across a whole bunch of arches really solves one basic problem. We want to audit when seccomp is killing a process. seccomp hooks in before the audit syscall entry code. audit_syscall_entry took as an argument the arch of the given syscall. Since the arch is part of what makes a syscall number meaningful it's an important part of the record, but it isn't available when seccomp shoots the syscall... For most arch's we have a better way to get the arch (syscall_get_arch) So the solution was two fold: Implement syscall_get_arch() everywhere there is audit which didn't have it. Use syscall_get_arch() in the seccomp audit code. Having syscall_get_arch() everywhere meant it was a useless flag on the stack and we could get rid of it for the typical syscall entry. The other changes inside the audit system aren't grand, fixed some records that had invalid spaces. Better locking around the task comm field. Removing some dead functions and structs. Make some things static. Really minor stuff" * git://git.infradead.org/users/eparis/audit: (31 commits) audit: rename audit_log_remove_rule to disambiguate for trees audit: cull redundancy in audit_rule_change audit: WARN if audit_rule_change called illegally audit: put rule existence check in canonical order next: openrisc: Fix build audit: get comm using lock to avoid race in string printing audit: remove open_arg() function that is never used audit: correct AUDIT_GET_FEATURE return message type audit: set nlmsg_len for multicast messages. audit: use union for audit_field values since they are mutually exclusive audit: invalid op= values for rules audit: use atomic_t to simplify audit_serial() kernel/audit.c: use ARRAY_SIZE instead of sizeof/sizeof[0] audit: reduce scope of audit_log_fcaps audit: reduce scope of audit_net_id audit: arm64: Remove the audit arch argument to audit_syscall_entry arm64: audit: Add audit hook in syscall_trace_enter/exit() audit: x86: drop arch from __audit_syscall_entry() interface sparc: implement is_32bit_task sparc: properly conditionalize use of TIF_32BIT ...
| * | | | | audit: rename audit_log_remove_rule to disambiguate for treesRichard Guy Briggs2014-10-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename audit_log_remove_rule() to audit_tree_log_remove_rule() to avoid confusion with watch and mark rule removal/changes. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
| * | | | | audit: cull redundancy in audit_rule_changeRichard Guy Briggs2014-10-101-11/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Re-factor audit_rule_change() to reduce the amount of code redundancy and simplify the logic. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
| * | | | | audit: WARN if audit_rule_change called illegallyEric Paris2014-10-101-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Eric Paris <eparis@redhat.com>
OpenPOWER on IntegriCloud